1045 Propeller Pair CW/CCW 10 inch 10×4.5 For RC Drone FPV Multi Rotor – White
- 1045 Propeller
- Model: 1045
- Color: White
- Material: ABS
- Size: 10 * 4.5inch
- Weight: 26g /pair
- Fit for DJI 1045 F380 F450 F550 Quadcopter
In stock
₨ 200
In stock
1045 Propeller Pair CW/CCW 10 inch 10×4.5 For RC Drone FPV Multi Rotor – White
Propellers 1045(10X4.5) ABS is the high-quality propellers specially designed for multi-copters.
These Propellers are light in weight and high strength propeller has a 15° angle design at the end of the propeller to avoid whirlpool while the multi-copter is flying. They are useful in drones as well as in multi-copters.
The Propellers is of high endurance and flexibility for great impact. The propellers help to improve the air-powered efficiency and aerofoil stability.
Features:
- The replacement propellers are fit for RC planes, airplanes, RC model airplanes, props for quadcopters, quadrotor, replacement props for brushless motors, etc.
- These plastic RC props have very aerodynamic edges, are balanced and fly well, spins well, and fit for slow-speed park flyer. You get plenty of thrust at suitable RPM, making for a nice flying.
- The great flying experience of RC airplanes are very important for small flying spaces, these CW CCW RC propellers are good for slow flyer. Durable and very efficient at slow speed and high RPM.
- Due to external factors such as temperature, it is recommended to perform a final balance check of the propellers before the flight. You can put them on a stick and spin them, and they would spin for a while without any force applied.
Package Includes:
1 pair of white 1045 propellers
1 pair of hole adapters
- Color: White
- Weight: 11G+-/PC
- Rotation: Clockwise / Counter Clockwise (CW/CCW)
- Width:10″
- Pitch:4.5
- Diameter of shaft: 6.0mm
- Thickness of center: 9.7mm
- Recommended wheelbase: 550mm – 700mm
- Recommended motor: 800KV – 1100KV
Related products
-
Robotics & Machines, Stepper Motors & Drivers
DRV8825 Stepper Motor Driver Soldered Pins with Heat Sink
-27%
Robotics & Machines, Stepper Motors & DriversDRV8825 Stepper Motor Driver Soldered Pins with Heat Sink
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 micro stepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of the A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
SKU: 0752
