TB6560 3A Single Axis Controller Stepper Motor Driver

Features

The current level is adjustable to meet your various application requirements; Automatic semi-flow adjustable. The use of high-speed optical coupling 6N137, ensuring high speed without losing step; The board printed setup instructions, no user manual can operate; Using thick fine-toothed radiators, good heat dissipation.

Tb6560 stepper motor driver best price Pakistan 3A Single-Axis CNC Router Stepper Motor Driver Board is based on TB6560AHQ chip. It will significantly increase torque and ease of configuration of larger motors. Cheap and great driver for CNC or 3D printer. On the RAMPS/GRBL shield, there are 2, eight-pin connectors for where the A4988 motor drivers are meant to connect.

•  The current level adjustable to meet your various application needs.
•  The Automatic half-decay adjustable.
•  6N137 high-speed optical coupling, to ensure a high speed not step out.
•  Thick tooth radiators, good heat dissipation.
• Tb6560 stepper motor driver best price Pakistan

Specifications:

• Working voltage: DC 10 ~ 35V, recommended using a DC 24V power supply switch;
• Uses 6N137 high speed optocoupler, ensuring high speed never lost steps;
• Uses Toshiba TB6560AHQ brand new genuine chip, with low-voltage shutdown, over-temperature and over-current protection circuit parking, to ensure optimum performance;
• Rated maximum output is about 3A, peak value is 3.5A;
• Suitable 42, 57 3A stepper within two / four phase, four wire / six wire stepper motor, not suitable for more than 3A stepper motor;
• Automatic half current function; Segments: full step, half step, 1/8 step, 1/16 step, up to 16 segments;
• Size: 50 x 75 x 35 (mm)
• Dimensions: 2.95 in x 1.97 in x 1.38 in (7.5 cm x 5.0 cm x 3.5 cm)
• Weight: 2.89 oz (82 g)

Packing List:

1 x Motor driver board