NEMA23 24V Stepper motor 1.8/step with GT2 Pulley – Used
- Unipolar stepping motor (can be configured into bipolar)
- Long life
- More Accurate
- Step angle = 1.80deg/ phase
- Lead wire size AWG #22
- Number of leads = 6 cables
- S3M timing pulley diameter = 26mm
- Current Ratings: 1.8A/ 2A/ 2.2A/ 2.5A comes in different amperage
Out of stock
₨ 1,600 ₨ 2,000
Out of stock
NEMA23 6 Wire Bipolar Stepper Motor NEMA23 Stepper Motor NEMA 23 Stepper Motor is very useful in the various application especially which demands low speed with high precision Many machines such as 3D Printers CNC Router and Mills Camera Platforms XYZ Plotters etc. Nema23 6 wire Bipolar Stepper
Wiring (cables) :
Tips : this unipolar wiring, you can use as Bipolar wiring by using ORANGE-BLUE and RED-YELLOW cable.
- Nominal Voltage = 24 Volt DC (-0.3 to 7 Volt DC/ phase)
- Current = 0.8 A/ phase
- Resistance = 8.6 Ohm/ phase
- Inductance = 19 mH/ phase
- Holding torque = 13Kg.cm
- Rotor-intertia = 360 g-cm2
- Weight = 1000g
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 3.0Nm(425oz.in)
- Voltage: 3.78V
- Phase Resistance: 0.9ohms
Based on 0 reviews
Be the first to review “NEMA23 24V Stepper motor 1.8/step with GT2 Pulley – Used”
You must be logged in to post a review.
Related products
-
Planes And Copters, Robotics & Machines
1000KV A2212 Brushless DC Motor BLDC Rotor for Quadcopter Drone
Planes And Copters, Robotics & Machines1000KV A2212 Brushless DC Motor BLDC Rotor for Quadcopter Drone
This is a brushless outrunner 1000kv motor specifically made for quadcopters and multirotors. 1000 kv motors are perfect for medium size quadcopters F450 frame with 8 inch to 10 inch propellers.
SKU: 0974 -
Robotics & Machines, Stepper Motors & Drivers
DRV8825 Stepper Motor Driver Soldered Pins with Heat Sink
Robotics & Machines, Stepper Motors & DriversDRV8825 Stepper Motor Driver Soldered Pins with Heat Sink
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 micro stepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of the A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
SKU: 0752 -
Robotics & Machines, Stepper Motors & Drivers
TB6560 3A Single Axis Controller Stepper Motor Driver
Tb6560 stepper motor driver best price Pakistan 3A Single-Axis CNC Router Stepper Motor Driver Board is based on TB6560AHQ chip. It will significantly increase torque and ease of configuration of larger motors. Cheap and great driver for CNC or 3D printer.
SKU: 0758 -
There are no reviews yet.