12V Zener Diode 500mW Through Hole DO-35
The BZX79-T12 is a 12V Zener Diode with glass case. This product is general usage and suitable for many different applications.
In stock
₨ 5
In stock
A Zener diode is a special kind of diode which allows current to flow in the forward direction like a regular diode, but also allows it to flow in the reverse direction when the voltage is above a certain value. This is known as the ‘breakdown voltage’. That means you apply voltage across them, and when a preset voltage is reached, they start conducting. A common analogy is a ‘pressure relief valve’. They have lots of uses, especially in safety circuits where you want to make sure a voltage signal doesn’t exceed a limit that might damage the circuit.
This T12 Zener diode is set at 12V, making it ideal for protecting the inputs of a 12V circuit.
Zener diodes are often used to stabilize and clip circuits.
The C12 is a 12V Zener Diode, meaning it has a breakdown voltage of 12V.
| Attribute | Value |
| Nominal Zener Voltage | 12V |
| Diode Configuration | Single |
| Mounting Type | Through Hole |
| Number of Elements per Chip | 1 |
| Maximum Power Dissipation | 500 mW |
| Package Type | DO-35 |
| Zener Type | Voltage Regulator |
| Zener Voltage Tolerance | 5% |
| Pin Count | 2 |
| Test Current | 5mA |
| Maximum Zener Impedance | 25Ω |
| Maximum Reverse Leakage Current | 100nA |
| Dimensions | 4.25 x 1.85 x 1.85mm |
| Minimum Operating Temperature | -65 °C |
| Maximum Operating Temperature | +200 °C |
| Typical Voltage Temperature Coefficient | 8.4mV/°C |
Based on 0 reviews
Be the first to review “12V Zener Diode 500mW Through Hole DO-35”
You must be logged in to post a review.
Related products
-
Discrete Electronic Components, Resistors, Potentiometer & Knobs
10K Ohm 103 Multi turn Trimpot Potentiometer / Variable Resistor
Discrete Electronic Components, Resistors, Potentiometer & Knobs10K Ohm 103 Multi turn Trimpot Potentiometer / Variable Resistor
There are lots of trimpots out there. Some are very large, some so small they require a screwdriver. Here at Electrobes, we just needed a simple one that worked. This 10K trimmable potentiometer has a small knob built right in and it’s breadboard friendly to boot! Perfect for your next LCD contrast adjuster, opamp setting, or volume level. This is 3296W model 103 within the datasheet.
SKU: 079
There are no reviews yet.