Converters, Modules and Breakout Boards
400W 15A Step-up Boost Converter Constant Current DC-DC Step Up Module
Availability:
In stock
₨ 750
In stock
400W 15A Step-up Boost Converter Constant Current 8.5-50V to 10-60V Voltage Charger DC-DC Step Up Module
Features:
- This is a great 400W DC to DC step-up power supply module for electric equipment, digital products, laptop, etc.
- Input and output are designed with screw terminals for convenient wire connection and disconnection.
- High efficiency, the maximum conversion efficiency can be 96% and efficiency is related to input/output voltage, current and voltage difference.
- There are 2 heat sinks that would ensure a better heat dissipation.
- It can also be used as a driver for high power LED lights or voltage regulator for solar panels.
Output Voltage/Current Adjustment:
1, Adjust “CV-ADJ” potentiometer clockwise to reduce voltage, counterclockwise to increase voltage.
2, Adjust “CC-ADJ” potentiometer counterclockwise about 30 circles to minimize the output current before connecting to load(clockwise to increase current, counterclockwise to reduce current). Then adjust “CC-ADJ” clockwise to the current value you need. If you use the module for battery charging, connect to output after battery is fully discharged. Because if the more energy is left in battery, the less charging current will be.
Specifications:
- Type: Non-isolated boost module
- Input Voltage: DC 8.5V to 50V
- Output Voltage: DC 10V to 60V (continuously adjustable, default 19V)
- Max. Input Current: 15A (please enhance heat dissipation if more than 8A)
- Max. Output Current: 12A (related to the input and output voltage difference, the greater voltage difference is, the smaller output current will be. please enhance heat dissipation when current is over 7A)
- Quiescent Current: 10mA(will increase when convert 12V to 20V)
- Constant Current Range: 0.2A to 12A
- Output Power = Input Voltage*Current
- Operating Temperature: -40° to 85°(if temperature is too high, please enhance heat dissipation)
- Frequency: 150KHz
- Max. Conversion Efficiency: 96% (Efficiency is related to input/output voltage, current and voltage difference)
- Over Current Protection: Yes (if input current is more than 15A, it will automatic reduce output voltage)
- Reverse Input Protection: No
- Size: 6.7×4.7×2.7cm/2.64×1.85×1.06inch
Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Applications:
- DIY a power supply, 12V can input and output can 12-50V adjustable.
- The power supply for your electronic device, according to your system can set the output voltage value.
- As the car power supply for your laptop, PDA or a variety of digital products supply.
- DIY a mobile notebook power supply: 12V coupled with high-capacity lithium battery pack, so you can go where light where books.
- Solar panel regulator.
- To the battery, rechargeable lithium batteries.
- Driving high-power LED lights.
Package Includes:
1 x DC 400W 15A Step-up Boost Converter
- Module name: 400W boost constant current module
- Module properties: non-isolated step-up module (BOOST)
- Input voltage: DC 8.5V-50V
- Input current: 15A (MAX) exceeds 8A please enhance heat dissipation
- Quiescent current: 10mA (12V liter 20V, the output voltage, the higher the current will increase too quiet)
- Output voltage: 10-60V continuously adjustable
- Constant] range: 0.2-12A
- Temperature: -40 to + 85 degrees (ambient temperature is too high, please enhance heat dissipation)
- Operating frequency: 150KHz
- Conversion efficiency: up to 96%
- Overcurrent protection: yes
- Input reverse polarity protection: no
- Installation: 4 2.55mm screw holes
- Connection method: Connection Output
- Module size: 67mm X48mm X 28mm (LxWxH)
- Single module: 60 g
Based on 0 reviews
Be the first to review “400W 15A Step-up Boost Converter Constant Current DC-DC Step Up Module”
You must be logged in to post a review.
Related products
-
-
-
-
Compatibles for Arduino, Mainboards, Modules and Breakout Boards
Arduino UNO R3 16U2 DIP Version Development Board With Cable
-13%
Compatibles for Arduino, Mainboards, Modules and Breakout BoardsArduino UNO R3 16U2 DIP Version Development Board With Cable
Arduino Uno is a microcontroller board based on 8-bit ATmega328P microcontroller. It consists a 16MHz crystal oscillator, serial communication, voltage regulator, etc. to support the microcontroller.
SKU: 0100
There are no reviews yet.