Piezo Buzzer 95db High-decibel 3-24V Electronic Buzzer Beep Alarm Intermittent Continuous Beep
- Color: Black
- Alarm Diameter:22mm/0.86″
- Alarm Height:10mm/0.39”
- 2 Mounting Holes distance:30mm/1.18″
- 2 Wires length:90mm/3.54″
- Buzzer Type: Piezoelectric
- Sound Pressure Level 95 dB
- Rate Voltage: 12V DC
- Operating Voltage: 3 – 24V
- Max Current Rating 10mA
- Frequency 3900±500Hz
- Drive Method: Drive Circuit Built in Mounting Holes
In stock
₨ 120
In stock
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Audio & Visual, LCD & Display
12864 128X64 KS0108 Dots Graphic LCD Display Module (Blue Color Backlight)
Audio & Visual, LCD & Display12864 128X64 KS0108 Dots Graphic LCD Display Module (Blue Color Backlight)
The 12864B Graphic LCD module is a 128×64 pixel LCD display with a blue backlight and white foreground. The display is fully programmable and can display a combination of both graphics and text. It can operate in both parallel and serial (SPI) modes which can be configured by the external pin PSB. In SPI mode only 3 data pins are required to drive this display.
SKU: 0957 -
Audio & Visual, LCD & Display
16×2 LCD Display 1602 Character Display for Arduino – Blue
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Each character is build by a 5×8 pixel box
- Can work on both 8-bit and 4-bit mode
- It can also display any custom generated characters
- Backlight Color: Blue
SKU: 0804 -
Audio & Visual, LCD & Display
7 Segment BCD Display 0.5″ Common Cathode
- Available in two modes Common Cathode (CC) and Common Anode (CA)
- Available in many different sizes like 9.14mm,14.20mm,20.40mm,38.10mm,57.0mm and 100mm (Commonly used/available size is 14.20mm)
- Available colours: White, Blue, Red, Yellow and Green (Res is commonly used)
- Low current operation
- Better, brighter and larger display than conventional LCD displays.
- Current consumption : 30mA / segment
- Peak current : 70mA
SKU: 0471 -
-
Audio & Visual, LCD & Display
0.96 Inch 128×64 IIC I2C OLED Blue Display Module For Arduino
This OLED display module is small, only 0.96″ inch diagonal, it is made of 128×64 individual blue OLED pixels, each one is turn on or off by the controller chip. It has white backlight and can work without backlight, OLED display is higher compared to that of LCD display, you will like the miniature for its crispness. This module uses I2C to communicate with microcontroller such as Arduino.
SKU: 0537
There are no reviews yet.