module
Showing 49–96 of 151 resultsSorted by latest
-
Converters, Modules and Breakout Boards
PCF8591 ADC & DAC Analog to Digital and Digital to Analog Converter Module
-19%
Converters, Modules and Breakout BoardsPCF8591 ADC & DAC Analog to Digital and Digital to Analog Converter Module
The PCF8591 is a monolithically integrated, and a separate power supply, low-power, 8-bit CMOS data acquisition devices. The PCF8591 has the four analog inputs, one analog output and a serial I2C bus interface. PCF8591 three address pins A0, A1 and A2 can be used in hardware address programmed 8 PCF8591 device allows access to the same I2C bus, without the need for additional hardware. On the PCF8591 device input and output of the address, control and data signals are transmitted in serial fashion via the two-wire bidirectional I2C bus.
SKU: 0764 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
RCWL-0516 Doppler Radar Microwave Sensor Module Human Induction Detector Switch
General Sensors, Modules and Breakout Boards, Sensors & TransducersRCWL-0516 Doppler Radar Microwave Sensor Module Human Induction Detector Switch
This mini doppler radar sensor module is equipped with supporting DC 4-28V wide voltage This is a mini radar motion sensor module is equipped with RCWL-9196 chip based on the doppler microwave induction technology. It will automatically comtinuously output the high level TTL signel when there is motion. 360 degree no blind angle detection and maximum 7m sensoring distance with adjustable delay time and sensitivity. It is perfect for DIY microwave motion sensor light switch, human sensor toys, smart security devices, etc.
SKU: 0761 -
General Electronic Boards, Modules and Breakout Boards
LM386 Audio Amplifier Module
The LM386 Audio Amplifier Module is a basic signal amplifier with 200X Gain, designed to accept incoming audio signals and boost them while maintaining the correct sound levels and ratios. It is a low-voltage Electronic Module with a small form factor that can read incoming signals from audio devices like radios, guitar pickups and microphones to amplify them for audio output devices like speakers, headphones or additional digital modules. It features an internal gain of 20x to keep the external parts count as low as possible, and an onboard potentiometer for manual on-the-fly volume adjustments.
SKU: 0763 -
General Electronic Boards, Modules and Breakout Boards
HX711 Pressure Sensor Load Cell Amplifier Module
General Electronic Boards, Modules and Breakout BoardsHX711 Pressure Sensor Load Cell Amplifier Module
The HX711 Dual-Channel 24 Bit Precision A/D weight Pressure Sensor Load Cell Amplifier and ADC Module is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight.
SKU: 0762 -
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry Pis
Raspberry Pi 4 model B 2GB Computer Development Board
-3%
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry PisRaspberry Pi 4 model B 2GB Computer Development Board
Raspberry Pi 4 has the ability to interact with the outside world & has been used in digital maker projects. Apart from that USB 3, dual HDMI, an upgraded CPU, camera and SD card slot and massive memory would provide much better performance to run applications.
SKU: 0747 -
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry Pis
Raspberry Pi 4 model B 4GB Computer Development Board
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry PisRaspberry Pi 4 model B 4GB Computer Development Board
Raspberry Pi 4 has the ability to interact with the outside world & has been used in digital maker projects. Buy Online Pi 4 with electrobes in Pakistan. Apart from that USB 3, dual HDMI, an upgraded CPU, camera and SD card slot and massive memory would provide much better performance to run applications.
SKU: 0748 -
Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & Power
ACS712 30A 30 Amp Current Sensor Module
Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & PowerACS712 30A 30 Amp Current Sensor Module
The ACS712 Module uses the famous ACS712 IC to measure current using the Hall Effect principle. The module gets its name from the IC (ACS712) used in the module, so for you final products use the IC directly instead of the module.
SKU: 0757 -
Modules and Breakout Boards, Sensors & Transducers
ACS712 20A 20 Amp Current Sensor Module
The ACS712 Module uses the famous ACS712 IC to measure current using the Hall Effect principle. The module gets its name from the IC (ACS712) used in the module, so for you final products use the IC directly instead of the module.
SKU: 0756 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & Power
ACS712 5A 5 Amp Current Sensor Module
General Sensors, Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & PowerACS712 5A 5 Amp Current Sensor Module
The ACS712 Module uses the famous ACS712 IC to measure current using the Hall Effect principle. The module gets its name from the IC (ACS712) used in the module, so for you final products use the IC directly instead of the module.
SKU: 0755 -
Modules and Breakout Boards, Robotics & Machines, Stepper Motors & Drivers
L298N H-Bridge Motor Driver Module
Modules and Breakout Boards, Robotics & Machines, Stepper Motors & DriversL298N H-Bridge Motor Driver Module
The L298 motor driver module features:
- Finned Aluminum Heatsink for the L298 IC
- Clamping Rectifiers
- Filter Capacitors for logic-power and moto-power busses
- Onboard 5-Volt DC Regulator (A jumper selects between external 5-Volt power or the onboard 5-volt regulator.)
- Screw Terminal connections for ground, motor power, 5-volt power, and motor outputs
- 0.1 inch-pitch header pins for logic inputs
- Jumpers to tie the enable inputs to ground (if desired)
- Switches up to 2 amps per channel
SKU: 0753 -
Modules and Breakout Boards
CH340 USB to TTL (Serial) HW 597 Converter Module
A simple USB to serial converter with selectable voltage through a jumper. Specifications:
- 3.3V-5V TTL voltages
- Converts TTL logic levels to computer RS232 levels
- Power supplies: 5V, 3.3V, GND (min)
- RX (3.3V-5V)
- TX (3.3V-5V)
SKU: 0751 -
Modules and Breakout Boards
HC SR505 PIR Motion Sensor Module
HC-SR505 is mini PIR (Passive Infra Red) motion sensor module, which as the name implies used for detecting the motion of a body in front of it. The device works based on infrared technology and it can automatic control by itself with high sensitivity and high reliability. Because of the minimum size and low-power operation mode, it widely used in battery-powered applications.
SKU: 0749 -
Mechanical, Motors and Driver, Robotics & Machines, Stepper Motors & Drivers
IBT-2 43A H-bridge Double BTS7960 High Power Motor Driver Module
Mechanical, Motors and Driver, Robotics & Machines, Stepper Motors & DriversIBT-2 43A H-bridge Double BTS7960 High Power Motor Driver Module
The drive uses an H-bridge driver module that composed by Infineon power drive chip BTS7960, with overheating and over-current protection. Double BTS7960 H-bridge driver circuit, with strong drive and braking effect, use 74HC244 chip effectively isolate the microcontroller and the motor drive! High Current up to 43A!
SKU: 0740 -
Audio & Visual, General Sensors, Modules and Breakout Boards, Sensors & Transducers
AS608 Fingerprint Reader Optical Sensor Module
Audio & Visual, General Sensors, Modules and Breakout Boards, Sensors & TransducersAS608 Fingerprint Reader Optical Sensor Module
- Optical fingerprint capture for accurate biometric identification
- Compact, low-power design ideal for embedded systems and IoT devices
- Easy serial/UART integration with Arduino, Raspberry Pi, STM32 and other MCUs
- Fast enrollment and verification with onboard template management
- Durable touch surface rated for repeated daily use
- Developer-friendly with example code and rapid prototyping support
SKU: 0738 -
Audio & Visual, General Sensors, Modules and Breakout Boards, Sensors & Transducers
R307 Optical Fingerprint Scanner Module for Arduino
Audio & Visual, General Sensors, Modules and Breakout Boards, Sensors & TransducersR307 Optical Fingerprint Scanner Module for Arduino
- R307 is an optical fingerprint module integrates a fingerprint algorithm chip with functions such as fingerprint entry, image processing, feature extraction, template generation, template storage, fingerprint comparison (1: 1) and fingerprint search (1: N).
- The fingerprint reader can perform secondary development and be embedded in various end products, e.g. For example: access control, presence, safe, car door locks.
- Low power consumption, low cost, small size, excellent performance.
- Professional optical technology, precise module manufacturing technology.
SKU: 0737 -
-
Arduino Tools & Kits, Compatibles for Arduino, Modules and Breakout Boards
Arduino UNO Rev3 USB 2.0 Cable Type A/B
Arduino Tools & Kits, Compatibles for Arduino, Modules and Breakout BoardsArduino UNO Rev3 USB 2.0 Cable Type A/B
- USB Type: Type-A to Type-B
- Weight: 25 gm.
- Length: 30 cm.
- Fully compatible with the PC.
- Aluminum under-mold shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference
SKU: 0722 -
Compatibles for Arduino, Mainboards, Modules and Breakout Boards
Arduino UNO R3 SMD Variant Improved Version
-32%
Compatibles for Arduino, Mainboards, Modules and Breakout BoardsArduino UNO R3 SMD Variant Improved Version
The Arduino Uno R3 Compatible Board is a microcontroller board which is based on the ATmega328. Arduino Uno has 14 digital input or output pins(where 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It has everything needed to support the microcontroller, you need to simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
SKU: 0119-1 -
Converters, Modules and Breakout Boards
5V to 3.3V DC-DC Step down Converter Module Board AMS1117 3V3
Converters, Modules and Breakout Boards5V to 3.3V DC-DC Step down Converter Module Board AMS1117 3V3
Buy online 5V to 3.3V DC-DC Step down Converter Module Board AMS1117 3V3 in Pakistan. This AMS1117 3.3V Power Supply Module is great for your microcontroller projects and for various electronic prototypes. This is a high-performance module which provides a quick solution for powering your circuit.
SKU: 0745 -
Breakout Boards, Modules and Breakout Boards
nRF24L01 Breakout Adapter with On-board 3.3V Regulator
Buy online nRF24L01 Breakout Adapter with On-board 3.3V Regulator in Pakistan. is one of the famous wireless RF module for makers. There are tones of tutorials uses this module for wireless communication.
SKU: 0117 -
Modules and Breakout Boards, Wireless Communication
NRF24L01 2.4GHz Wireless Transceiver RF Transceiver Module
Modules and Breakout Boards, Wireless CommunicationNRF24L01 2.4GHz Wireless Transceiver RF Transceiver Module
Buy online NRF24L01 2.4GHz Wireless Transceiver RF Transceiver Module in Pakistan is a highly integrated, ultra low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific and Medical) band.
SKU: 0116 -
Modules and Breakout Boards, Wireless Communication
UBLOX NEO-6M V2 GPS Module for Arduino Raspberry Pi
Modules and Breakout Boards, Wireless CommunicationUBLOX NEO-6M V2 GPS Module for Arduino Raspberry Pi
Buy online UBLOX NEO-6M V2 GPS MODULE in Pakistan. UBLOX NEO-6M GPS Module has a battery for power backup and EEPROM for storing configuration settings. The Ublox GPS module has serial TTL output.
SKU: 1081 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
Tilt Sensor Module SW-520D
Their function is to detect the plane shift from horizontal to vertical and sent of a signal when it happens. There are modules which could sense even small plane shifts but here we are going to discuss about simple contact type TILT SENSOR module. Here we are going to use TILT SENSOR MODULE SW-520D
SKU: 0474 -
Modules and Breakout Boards, Sensors & Transducers, Temperature Sensor
W1209 Digital Thermostat Temperature Control Switch Sensor Module
Modules and Breakout Boards, Sensors & Transducers, Temperature SensorW1209 Digital Thermostat Temperature Control Switch Sensor Module
With this module (HCTHER0006) you can intelligently control power to most types of electrical device based on the temperature sensed by the included high accuracy NTC temperature sensor. Although this module has an embedded microcontroller no programming knowledge is required. 3 tactile switches allow for configuring various parameters including on & off trigger temperatures.
SKU: 0834 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
TCRT5000 IR Sensor Module Line Tracking Line Following
General Sensors, Modules and Breakout Boards, Sensors & TransducersTCRT5000 IR Sensor Module Line Tracking Line Following
The TCRT5000 infrared sensor module has strong drive ability, good waveform, and clear signal making it ideal for your projects which require obstacle detection, watt-hour meter pulse data sampling and more.
SKU: 0828 -
-
-
-
Breadboards, Protoboards & PCBs, Discrete Electronic Components, Modules and Breakout Boards, Voltage, Current & Power
MB102 Breadboard Power Supply Module 3.3V/5V For Arduino Solderless Bread Board
Breadboards, Protoboards & PCBs, Discrete Electronic Components, Modules and Breakout Boards, Voltage, Current & PowerMB102 Breadboard Power Supply Module 3.3V/5V For Arduino Solderless Bread Board
The Breadboard power supply has 3.3V/5V selectable output on two channels. The maximum current can be drawn is 700mA. The selection of the output voltage is independent on each channel and the user can select the output voltage by changing jumpers separately.
SKU: 0649 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
JSN-SR04T / AJ-SR04T Waterproof Ultrasonic Sensor Module
General Sensors, Modules and Breakout Boards, Sensors & TransducersJSN-SR04T / AJ-SR04T Waterproof Ultrasonic Sensor Module
- small size, easy to use
- low voltage, low power consumption
- high accuracy
- strong anti-jamming
- integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions
SKU: 0648 -
Compatibles for Arduino, Mainboards, Modules and Breakout Boards
LilyPad Arduino 328 Main Board (ATmega328P Processor)
Compatibles for Arduino, Mainboards, Modules and Breakout BoardsLilyPad Arduino 328 Main Board (ATmega328P Processor)
The LilyPad Arduino 328 Main Board is an Arduino-programmed microcontroller designed to be easily integrated into e-textiles and wearable projects. The LilyPad Arduino consists of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible.
SKU: 0647 -
Light and Infrared Sensors, Modules and Breakout Boards, Sensors & Transducers
IR Infrared Obstacle Avoidance Sensor Module for Arduino
Light and Infrared Sensors, Modules and Breakout Boards, Sensors & TransducersIR Infrared Obstacle Avoidance Sensor Module for Arduino
Infrared Sensor Module has built-in IR transmitter and IR receiver that sends out IR rays and looks for reflected IR rays to detect presence of any obstacle in front of the sensor module.
SKU: 0646 -
Buttons, Switches & Pads, Connectivity, Touch Switch
TTP229 16 Key 4×4 16 Channel Digital Capacitive Touch Keypad
-29%
Buttons, Switches & Pads, Connectivity, Touch SwitchTTP229 16 Key 4×4 16 Channel Digital Capacitive Touch Keypad
This 16 key capacitive touch keypad is based on the TTP229 capacitive sensor with accurate sensing of up to 16 points. Using this keypad provides a solid state alternative to mechnical type keypads providing the advantage of greater durability especially in dusty environments.
SKU: 0644 -
Buttons, Switches & Pads, Connectivity, Touch Switch
1 Channel Capacitive Touch Module – TTP223
A capacitive touch sensor module based on the dedicated TTP223 touch sensor IC. The module provides a single integrated touch sensing area of 11 x 10.5mm with a sensor range of ~5mm. An on-board LED will give a visual indication of when the sensor is triggered.
SKU: 0643 -
Buttons, Switches & Pads, Connectivity, Touch Switch
Jog Type Capacitive Touch Switch Digital Touch Sensor TTP223B Module For Arduino
Buttons, Switches & Pads, Connectivity, Touch SwitchJog Type Capacitive Touch Switch Digital Touch Sensor TTP223B Module For Arduino
A capacitive touch sensor module based on the dedicated TTP223B touch sensor IC. The module provides a single integrated touch sensing area of 11 x 10.5mm with a sensor range of ~5mm. An on-board LED will give a visual indication of when the sensor is triggered.
SKU: 0642
