ANYCUBIC Wash and Cure 3 Plus, with Gooseneck Illumination, Dual Layer and IPA Saving, for Photon M5/M5s/X2/X 6Ks/Halot-Mage/Mage Pro/Saturn 3 4 ultra LCD/SLA/DLP 3D Printer, 228x128x260mm

Features:

• Higher Compatibility: Anycubic Wash Anycubic Wash and Cure 3 Plus has increased the washing size to 228 x 128 x 260 mm. And compared to Wash & Cure Plus, the laundry basket laundry volume increases by about 13.4% to 7.6 liters, which is suitable for more LCD 3D printers such as Photon Mono M5s, Saturn 3 series or other 10.6 inches and below.
• Flexicure Gooseneck Lamp: Thanks to the innovative Flexicure Gooseneck lamp design, the Wash & Cure 3 Plus can increase the energy value in the irradiation area 1 to 3 cm by 30,000 uW/cm²*, which greatly improves the solidification effect of the top of the model, the figure skirt and other subtle areas as well as the light tube can be rotated, making it more practical to use.
• Higher uniformity of curing: Anycubic Wash & Cure 3 Plus uses a new lamp arrangement combined with a lens light source. Compared with the previous generation Wash & Cure Plus, it hardens 20% smoother, which allows models to be cured more fully.
• Effective IPA Utility: The stainless steel two-layer cleaning basket made of PP material supports washing with platform. It is equipped with two adjustable heights of 150mm and 250mm and allows pressure platforms from 6.6 to 10.6 inches, maximizing the effectiveness of alcohol consumption.
• Double-layer curing: A specially developed double-layer curing platform increases the number of models cured per cycle and significantly improves curing efficiency.