Creality Space PI X4 Filament Dryer Plus Dual 3D Printer Filament Dehydrator Storage Box
| Spool Diameter ≤ 200mm, Width ≤150mm, Filament diameter: 1.75/2.85mm | |
| Housing Material | ABS/PA/PC |
| Flame Retardant Grade | UL 94 V-0 |
| Input Voltage | UK/GB/EUR/AUS/BRA/CHL/ARG 220-240V~50/60Hz; US/JPN100-120V~50/60Hz |
| Rated Power | 360W |
| Product Size | 382x290x270mm |
| Packaging Size | 453X350X330mm |
| Product Net Weight | 5kg |
Out of stock
₨ 37,500
Out of stock
Creality Filament Dryer Box,Space PI X4 Dry Box 4 Spool,200W PTC 3D Printer Dehydrator,360° Uniform Drying,Upto 85℃,Dual Chamber,Auto Silent,Desiccant Refresh,Active Dehumidifier for PLA,PETG,ABS,PA
Dry 4 Spools at Once
Dry and print at once for maximum efficiency
Effortless multi-color printing, seamless multi-filament drying.
200W + 200W PTC Heats Up to 85°C
Ideal for Engineering Filaments
The dual 200W PTC heaters, paired with insulated chambers, significantly improve heating
efficiency, allowing temperatures to reach up to 85°C. This ensures continuous and effective
drying of engineering filaments such as PA, PAHT, PC.
*High-temperature drying should consider the heat resistance of the spools.
Why Do You Need a SpacePi X4?
Moisture ruins filaments, may causing defects like stringing, clogging, layer shifting and poor adhesion. SpacePi removes humidity, restoring filaments to their optimal state for smooth, high-quality prints. The temperature inside the X4 can reach up to 85°C, which can save you nearly 50% of the time when drying engineering filaments such as PA-CF, PAHT, PPA.
Recommended Drying Temperatures
*Please refer to the filament manufacturer’s recommended drying temperatures for best results.
PLA
PA
TPU
PETG
ABS
Dual Chambers
Independent Temperature Control
Each chamber is equipped with an independent PTC heater, allowing simultaneous
drying of two filament types at different temperatures in one machine.
*At the same target temperature, the two chambers may have a real-time temperature
difference of 1~5℃ during the heating process, which is normal.
Flexible and Energy-Efficient Drying
You can choose between single or dual chamber modes for energy-efficient
drying. Single-chamber operation saves up to 40% energy, it’s eco-friendly and
cost-effective.
SpaceDry 4.0™
One-stop Drying Solution
The SpaceDry 4.0™ achieves the perfect balance
between efficient dehumidification and energy-saving
drying. Its dual-chamber design significantly reduces
energy consumption while integrating efficient heating,
desiccant regeneration, and active dehumidification to
improve drying/storage capabilities.
SpaceDry 4.0™ sets a new benchmark in drying technology.
360° Hot Air Circulation
The 360° surrounding hot air circulation ensures
efficient heating and consistent temperature,
allowing for uniform drying of filaments inside the
chamber.
Desiccant Regeneration
The desiccant chamber connects to the heating airflow,
regenerating the desiccant automatically with each use.
No replacement needed, providing a hassle-free and
efficient drying process.
Active Dehumidification
Dual dehumidifying fans actively expel moisture
during drying, no manual dehumidification.
One-Way Valve Design
Ensure air tightness after drying to avoid moisture.
Keep Creativity Dry,
Keep Inspiration Alive!
Smarter Drying,
Elevated Printing Experience
First drying scene touch UI
With an 3.2″ touch screen offers a smoother, more intuitive interaction.
Recommend appropriate drying temperatures and times for filaments.
Humanized Intelligent Functions
*All features can be toggled on/off according to personal preference
Once the target temperature is reached, the drying fan speed automatically reduces,
operating quietly without disturbing your peace.
Triple Safety Protection
Intelligent self-checking for early detection of issues, ensuring safe
and worry-free drying.
Automatic drying pause if fanspeed is abnormal or interrupted.
PTC fuse with self-reset: disconnectsat high temperature, reconnects
when normal.
NTC sensor at the air outlet, drying automatically pauses if temperature is abnormal.
Wide Compatibility
Large size for 1kg/2kg spools. Works perfectly with all standard filament diameters 1.75/2.85mm.
Diameter ≤ 200mm, Width ≤150mm
Quality Details
Product parameters
Explore more about SpacePi X4
| Product Name | Creality SpacePi X4 |
| Temperature Range | 45-85°C |
| Drying Time | 1-48h |
| Applicable Filament | Spool Diameter ≤ 200mm, Width ≤150mm, Filament diameter: 1.75/2.85mm |
| Housing Material | ABS/PA/PC |
| Flame Retardant Grade | UL 94 V-0 |
| Input Voltage | UK/GB/EUR/AUS/BRA/CHL/ARG 220-240V~50/60Hz; US/JPN100-120V~50/60Hz |
| Rated Power | 360W |
| Product Size | 382x290x270mm |
| Packaging Size | 453X350X330mm |
| Product Net Weight | 5kg |
Based on 0 reviews
Be the first to review “Creality Space PI X4 Filament Dryer Plus Dual 3D Printer Filament Dehydrator Storage Box”
You must be logged in to post a review.
Related products
- 3D Printer Parts, CNC & 3D Printers
MK8/9 Dual Extruder Feed Device Part For 3D Printer 1.75mm Filament – 1( Right Side)
-6%
3D Printer Parts, CNC & 3D PrintersMK8/9 Dual Extruder Feed Device Part For 3D Printer 1.75mm Filament – 1( Right Side)
Buy online MK8/9 Dual Extruder Feed Device Part For 3D Printer 1.75mm Filament – 1( Right Side) in Pakistan. Electrobes has quality products for 3D printers & CNC machines, ABS, PLA.
SKU: CNC-068
There are no reviews yet.