Note: Setting the exposure time

1. Exposure time should be adjusted according to printer light energy, layer thickness and model structure.

If the layer height is less than 50um, it is recommended that the exposure time of each layer be reduced by about 2 seconds.

2. Number of floor layers: Base thickness/thickness of each layer + 1

For example, base thickness 0.4mm, each layer thickness 50um, number of layers = 0.4/0.05 + 1 = 9 layers.

3. When printing with general FEP/NFEP films, the recommended lifting distance is as follows:

Less than 7” screen size, lifting distance: 6mm;

7-10″ screen size, lifting distance: 8-10mm;

10.1″ screen size, lifting distance: 11mm;

13.3″ screen size, lifting distance: 14mm;

15″ screen size, lifting distance: 15mm.

When printing with fast print films, the lifting distance can be reduced by 30-50%.

For example, the lifting speed on the film can be adjusted from 40-60 (mm/min) while using a standard size ACF film of 80 (mm/min).

4. Recommended exposure time:

Package Includes:

1 x 1000g ultra jewelry cast resin