Tower Pro MG996R Metal Gear Micro Servo Motor 180 Degree
MG996R Metal Gear Micro Servo Motor with a maximum torque of 11 kg/cm rotates from 0 to 360 degree based on the duty cycle of the PWM. Buy online in Pakistan. Also available in 360 degree rotation.
In stock
₨ 950
In stock
MG996R Metal Gear Micro Servo Motor 180 Degree
The MG996R is a metal gear servo motor with a maximum stall torque of 11 kg/cm. Like other RC servos the motor rotates from 0 to 180 degree based on the duty cycle of the PWM wave supplied to its signal pin.
Also available in 360 degree rotation.
Wire Configuration:
| Wire Number | Wire Colour | Description |
| 1 | Brown | Ground wire connected to the ground of system |
| 2 | Red | Powers the motor typically +5V is used |
| 3 | Orange | PWM signal is given in through this wire to drive the motor |
- Operating Voltage is +5V typically
- Current: 2.5A (6V)
- Stall Torque: 9.4 kg/cm (at 4.8V)
- Maximum Stall Torque: 11 kg/cm (6V)
- Operating speed is 0.17 s/60°
- Gear Type: Metal
- Rotation : 0°- 360°
- Weight of motor : 55gm
- Package includes gear horns and screws
Related products
- Robotics & Machines, Motor and Gears
3V-6V DC 12x20mm 1220 Miniature Vibration Motor Micro Vibrator
The brand new 1220 micro motor has a brass vibration head. The applicable voltage is DC3V-DC6V. The vibration power is good. The motors are all affixed with noise-reducing sponges and original plastic disks. The brush and commutator are of very good quality.
SKU: 0688 - Modules and Breakout Boards, Robotics & Machines, Stepper Motors & Drivers
L298N H-Bridge Motor Driver Module
Modules and Breakout Boards, Robotics & Machines, Stepper Motors & DriversL298N H-Bridge Motor Driver Module
The L298 motor driver module features:
- Finned Aluminum Heatsink for the L298 IC
- Clamping Rectifiers
- Filter Capacitors for logic-power and moto-power busses
- Onboard 5-Volt DC Regulator (A jumper selects between external 5-Volt power or the onboard 5-volt regulator.)
- Screw Terminal connections for ground, motor power, 5-volt power, and motor outputs
- 0.1 inch-pitch header pins for logic inputs
- Jumpers to tie the enable inputs to ground (if desired)
- Switches up to 2 amps per channel
SKU: 0753 - Robotics & Machines, Planes And Copters
1000KV A2212 Brushless DC Motor BLDC Rotor for Quadcopter Drone
Robotics & Machines, Planes And Copters1000KV A2212 Brushless DC Motor BLDC Rotor for Quadcopter Drone
This is a brushless outrunner 1000kv motor specifically made for quadcopters and multirotors. 1000 kv motors are perfect for medium size quadcopters F450 frame with 8 inch to 10 inch propellers.
SKU: 0974 - Mechanical, Motors and Driver, Robotics & Machines, Stepper Motors & Drivers
IBT-2 43A H-bridge Double BTS7960 High Power Motor Driver Module
Mechanical, Motors and Driver, Robotics & Machines, Stepper Motors & DriversIBT-2 43A H-bridge Double BTS7960 High Power Motor Driver Module
The drive uses an H-bridge driver module that composed by Infineon power drive chip BTS7960, with overheating and over-current protection. Double BTS7960 H-bridge driver circuit, with strong drive and braking effect, use 74HC244 chip effectively isolate the microcontroller and the motor drive! High Current up to 43A!
SKU: 0740
