SU-27 Aircraft Model Landing Gear Front Wheel Steering Airplane
The ZFT-6 radio remote control is a simple, easy-to-use system that performs as well as working speed and range. Ideal for new riders or as an entry point into the Hobby.
Only 4 left in stock
₨ 950
Only 4 left in stock
SU-27 Aircraft Model Landing Gear Airplane
This is new plastic landing gear, Abrasives are continuously tested from material to assembly and have been greatly improved.
1 crash resistant nylon
2. Easy to assemble
3. Adjustable rear wheel height
4 for a variety of models
5. High-elastic sponge wheels
Product specification:
Front wheel diameter 30MM, rear wheel diameter 40MM
Front wheel total height: 115MM Rear wheel total height: 105MM (can be raised and lowered)
Installation method: front wheel screw fixed rear wheel with hot melt glue gun fixed
Related products
- Mechanical, Motors and Driver, Robotics & Machines, Stepper Motors & Drivers
IBT-2 43A H-bridge Double BTS7960 High Power Motor Driver Module
Mechanical, Motors and Driver, Robotics & Machines, Stepper Motors & DriversIBT-2 43A H-bridge Double BTS7960 High Power Motor Driver Module
The drive uses an H-bridge driver module that composed by Infineon power drive chip BTS7960, with overheating and over-current protection. Double BTS7960 H-bridge driver circuit, with strong drive and braking effect, use 74HC244 chip effectively isolate the microcontroller and the motor drive! High Current up to 43A!
SKU: 0740 - Modules and Breakout Boards, Robotics & Machines, Stepper Motors & Drivers
L298N H-Bridge Motor Driver Module
Modules and Breakout Boards, Robotics & Machines, Stepper Motors & DriversL298N H-Bridge Motor Driver Module
The L298 motor driver module features:
- Finned Aluminum Heatsink for the L298 IC
- Clamping Rectifiers
- Filter Capacitors for logic-power and moto-power busses
- Onboard 5-Volt DC Regulator (A jumper selects between external 5-Volt power or the onboard 5-volt regulator.)
- Screw Terminal connections for ground, motor power, 5-volt power, and motor outputs
- 0.1 inch-pitch header pins for logic inputs
- Jumpers to tie the enable inputs to ground (if desired)
- Switches up to 2 amps per channel
SKU: 0753
