15A 400W MOSFET Trigger Switch Driver Module
The board is of high power MOS trigger switch driver module and control board with field-effect tube to adjust the electronic switch. It adopts imported double MOS parallel active output to show lower internal resistance, greater electric current and power.
Besides it works at 15A,400W under common temperature which satisfies most devices usage and realizes the control of great power devices in a relaxed way.
Out of stock
₨ 90
Out of stock
Theย MOSFET Trigger Switch Drive Moduleย isย ofย highย powerย MOSย triggerย switchย driverย moduleย andย controlย boardย with a field-effectย tubeย toย adjustย theย electronicย switch. Thisย MOSFET voltage regulatorย adoptsย importedย doubleย MOSย parallelย activeย outputย toย showย lowerย internalย resistance, greaterย electricย current, andย power.ย Besidesย itย worksย atย 15A,400Wย underย commonย temperatureย whichย satisfiesย mostย devicesย usageย andย realizesย theย controlย ofย greatย powerย devicesย inย aย relaxedย way.ย Whatโsย more,ย itย canย beย appliedย toย powerfulย devicesย whichย couldย beย controlledย byย outputย terminalsย likeย electricย motorsย andย lightย bulbsย toย controlย theย speedย of the motorย andย theย lightย ofย bulbs. Certainly, youย canย applyย itย toย devicesย thatย couldย inputย PWMย forย controlย like an LEDย lightย belt,ย DCย motor, Micropump, andย solenoidย valves.
Features:
- High power MOS field effect tube trigger switch driver module PWM regulating electronic switch panel.
- Adopts imported large power dual-MOS transistor parallel active output, lower resistance, higher current and strong power.
- Perfect support PWM signal: the PWM controller can access PWM signal, which can perfectly supported the frequency of 0-20khz.
- This motor control module can tolerate wide input Voltage (DC 5-36v) it can be applied in various high power equipment
- Applications: motor, lamp bulb, LED lamp strip, micro water pump etc.
Specifications Ofย MOS FET Trigger Switch Driver Module:
- Operating Voltage:ย DC 5V – 36V;
- The trigger source:ย digital high-low (DC3.3V – 20V), can be connected microcontroller IO port, PLC interfaces,ย DC power, you can access the PWM signal, the signal frequency 0–20KHZ perfect support.
- Output capacity:ย DC 5V – 36V, at room temperature, continuous current 15A, power 400W! Lower auxiliary cooling conditions, the maximum current up to 30A.
- Applications:ย You can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps,ย solenoid valves, etc.ย You can enterย PWM, motor speed control, lamp brightness.
- Availability:ย unlimited switch
- Operating temperature:ย -40-85
- Dimension:ย 34mm x 17mm x 12mm
Package Includes:
- 1 xย 15A 400W MOSFET Trigger Switch Drive Module


ย

- Operating Voltage:ย DC 5V – 36V;
- The trigger source:ย digital high-low (DC3.3V – 20V), can be connected microcontroller IO port, PLC interfaces,ย DC power, you can access the PWM signal, the signal frequency 0–20KHZ perfect support.
- Output capacity:ย DC 5V – 36V, at room temperature, continuous current 15A, power 400W! Lower auxiliary cooling conditions, the maximum current up to 30A.
- Applications:ย You can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps,ย solenoid valves, etc.ย You can enterย PWM, motor speed control, lamp brightness.
- Availability:ย unlimited switch
- Operating temperature:ย -40~-85
- Dimension:ย 34mm x 17mm x 12mm
Based on 0 reviews
Be the first to review “15A 400W MOSFET Trigger Switch Driver Module”
You must be logged in to post a review.









There are no reviews yet.