Multiple Bend Flex Sensor 4.5 Inch
A simple 2.2 inches flex sensor in length. As the sensor is flexed, the resistance across the sensor increases. Also available in 2.2 inches length.
In stock
₨ 5,000
In stock
A simple flex sensor 4.5″ in length. As the sensor is flexed, the resistance across the sensor increases.
The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend).
Connector is 0.1″ spaced and bread board friendly.
The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend).
Note: Please refrain from flexing or straining this sensor at the base. The usable range of the sensor can be flexed without a problem, but care should be taken to minimize flexing outside of the usable range. For best results, securely mount the base and bottom portion and only allow the actual flex sensor to flex.
Flex Sensor 4.5”in length.
Sensor is flexed resistance across the sensor increases.
Bread Board Friendly
- Thickness: 0.4mm
- Trigger Force: 20g, triggered (default resistance<200kΩ)
- Pressure Measuring Range: 20g~6kg
- Static Pressure & Dynamic Pressure Measurement (within the frequency of 10Hz)
- Initial Resistance: >10MΩ
- Activation Time: <0.01S
- Operating Temperature: -40℃~+85℃
- Lifespan: >1million times
- Hysteresis: +10%，(RF+ -RF-)/FR+，1000g Force
- Response Time: <10ms
- Drift: <5%, 2.5Kg Force, Static load 24H
