24V 6S 40A 18650 Li-Ion Lithium Battery Protection Board Solar Lighting BMS PCB with Balance Charging for E-bike Scooter
BMS (Battery Management System) – a battery management system designed to monitor the status of batteries, control the process of charging/discharging the battery, etc.
Six batteries (18650) can be connected simultaneously to this charge-discharge controller module. The module has protection against short circuits, overcharge and over-discharge. One of the functions of the charge controller is to turn off the power supply for the batteries when the maximum capacity of at least one battery is reached. This BMS controller is designed for more than 30,000 hours of operation. The maximum allowable current is 40 A.
If the maximum permissible value of the supply voltage is exceeded, the charge controller activates the “protection” mode. In order to restore the module, it is necessary to re-apply voltage to the input of the BMS board or wait a while until the charge controller automatically disables protection.
In stock
₨ 1,500
In stock
24V 6S 40A 18650 Li-Ion Lithium Battery Protection Board Solar Lighting BMS PCB with Balance Charging for E-bike Scooter
Features:
- Material: PCB
- Maximum discharge current: 40A
- Instantaneous discharge current: 70A
- Charging voltage: 25.5V
- Maximum charging current: 40A
- Overcharge detection voltage: 4.25±0.025V
- Overcharge delay: 1.0±0.5S
- Overcharge release voltage: 4.15±0.05V
- Battery balance detection voltage: 4.125±0.025V
- Battery balance release voltage: 4.125±0.05V
- Battery balance current: 41±5mA
- Over-discharge detection voltage: 2.7 ± 0.1V
- Over-discharge detection delay: 1.0±0.5S
- Over-discharge release voltage: 3.0±0.1V
- Overcurrent detection voltage: 100mV
- Overcurrent detection delay: 1±0.3S
- Overcurrent current: 75±5A
- Overcurrent release condition: disconnect load
- Short circuit condition: external load short circuit
- Short circuit detection delay: 250uS
- Short circuit release condition: disconnect load
- Main circuit conduction internal resistance: ≤20mΩ
- Working current: ≤40uA
- Temperature range: -30/+80°C
- Size: 88*34*2.8mm
Package Included:
1 x 3S 60A Li-ion Lithium Battery Protection PCB board.
Note:
Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
- Material: PCB
- Maximum discharge current: 40A
- Instantaneous discharge current: 70A
- Charging voltage: 25.5V
- Maximum charging current: 40A
- Overcharge detection voltage: 4.25±0.025V
- Overcharge delay: 1.0±0.5S
- Overcharge release voltage: 4.15±0.05V
- Battery balance detection voltage: 4.125±0.025V
- Battery balance release voltage: 4.125±0.05V
- Battery balance current: 41±5mA
- Overdischarge detection voltage: 2.7 ± 0.1V
- Overdischarge detection delay: 1.0±0.5S
- Overdischarge release voltage: 3.0±0.1V
- Overcurrent detection voltage: 100mV
- Overcurrent detection delay: 1±0.3S
- Overcurrent current: 75±5A
- Overcurrent release condition: disconnect load
- Short circuit condition: external load short circuit
- Short circuit detection delay: 250uS
- Short circuit release condition: disconnect load
- Main circuit conduction internal resistance: ≤20mΩ
- Working current: ≤40uA
- Temperature range: -30/+80°C
- Size: 88*34*2.8mm