LM339 VOLTAGE COMPARATOR IC
- Operating voltage range: +4.75 to +5.25V
- Recommended operating voltage: +5V
- Maximum supply voltage:7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Typical Rise Time: 18ns
- Typical Fall Time: 18ns
- Operating temperature:0°C to 70°C
- Storage Temperature: -65°C to 150°C
In stock
₨ 40 ₨ 50
In stock
LM339 is a voltage comparator IC from LMx39x series and is manufactured by many industries. The devices consist of four independent voltage comparators that are designed to operate from a single power supply. Also operation from dual supplies is possible, as long as the difference between the two supplies is 2 V to 36 V.
LM339 Pin Configuration
LM339 is a 14 pin device as shown in above pin diagram. Here we will name the pinout of all four comparators on the chip and describe function of each pin.
| Pin | Name | Description |
| 1 | 1OUT | Output pin of the comparator 1 |
| 2 | 2OUT | Output pin of the comparator 2 |
| 3 | VCC | Power supply |
| 4 | 2IN- | Negative input pin of the comparator 2 |
| 5 | 2IN+ | Positive input pin of the comparator 2 |
| 6 | 1IN- | Negative input pin of the comparator 1 |
| 7 | 1IN+ | Positive input pin of the comparator 1 |
| 8 | 3IN- | Negative input pin of the comparator 3 |
| 9 | 3IN+ | Positive input pin of the comparator 3 |
| 10 | 4IN- | Negative input pin of the comparator 4 |
| 11 | 4IN+ | Positive input pin of the comparator 4 |
| 12 | GND | Ground |
| 13 | 4OUT | Output pin of the comparator 4 |
| 14 | 3OUT | Output pin of the comparator 3 |
The device is available in many packages; a designer can choose one depending on their requirement.
Features and Electrical Characteristics of LM339
- Four individually operated voltage comparators
- Low noise interference among comparators
- Single Supply Operation: +3.0 V to +36 V
- Dual Supply Operation: +18V and -18V
- Low Input Bias Current: 25 nA
- Low Input Offset Current: ±5.0 nA
- Low Input Offset Voltage
- Input Common Mode Voltage Range to GND
- Low Output Saturation Voltage: 130 mV @ 4.0 mA
- TTL and CMOS compatible
- ESD Clamps on the inputs increase reliability without affecting device operation
- Pb−Free, Halogen Free/BFR Free and RoHS compliant
Applications
- Oscillators
- Voltage comparators
- Peak detectors
- Logic voltage translation
- Power supervision
- Industrial
- Measuring instruments
- Automotive
Related products
- Discrete Electronic Components, Resistors, Potentiometer & Knobs
10K Ohm Rotary Potentiometer Variable Resistor Trimpot with Lever
Discrete Electronic Components, Resistors, Potentiometer & Knobs10K Ohm Rotary Potentiometer Variable Resistor Trimpot with Lever
This 10K trimmable potentiometer has a small knob built right in and it’s breadboard friendly to boot! Perfect for your next LCD contrast adjuster, opamp setting, or volume level. This model is B10K within the datasheet.
SKU: 0201
