-
Audio & Visual, LCD & Display
10.1 Inch HDMI LCD Display Touch Panel HDW101_001L 1024×600 Pixels
The 10.1 inch HDMI LCD Capacitive Touch Display is a Seamless Human Machine Interface (HMI) display module solution that provides a control and visualization interface for any Raspberry Pi and Arduino kits.
SKU: 1847 -
-
EV Parts, Mechanical, Motors and Driver
DC48-60V High Power Brushless Motor 1300W DC Brushless Motor No Hall High Torque BLDC Motor
EV Parts, Mechanical, Motors and DriverDC48-60V High Power Brushless Motor 1300W DC Brushless Motor No Hall High Torque BLDC Motor
800-1300W high-power brushless motor voltage: 48-60V Hall free brushless motor, which can be driven by an electric vehicle dual mode controller sold on Taobao. It can also be used as a high-power generator.
SKU: 1755
-
Audio & Visual, LCD & Display
2.4 Inch ILI9341 Touchscreen TFT LCD Display Screen Shield Module For Arduino UNO R3 Board
-20%
Audio & Visual, LCD & Display2.4 Inch ILI9341 Touchscreen TFT LCD Display Screen Shield Module For Arduino UNO R3 Board
- Color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor).
- Composed of a color TFT-LCD panel, driver IC, FPC and a back light unit. The module display area contains 320 x 240 pixels.
- The screen uses analog pins A0-A4 for LCD control and touch screen operations, which are in the same position on the UNO and the Mega, so the touch screen should work without any modification.
- The shield comes equipped with a micro SD card reader for easy access to use a software-based SPI library.
- Compatible with Arduino UNO R3 Mega2560 DUE.
SKU: 0177
Best Sellers
Recently Added
Arduino UNO R3 16U2 DIP Version With Cable
Arduino UNO R3 16U2 DIP Version With Cable
Arduino Uno is a microcontroller board based on 8-bit ATmega328P microcontroller. It consists a 16MHz crystal oscillator, serial communication, voltage regulator, etc. to support the microcontroller.
10K Ohm 103 Multi turn Trimpot Potentiometer / Variable Resistor
10K Ohm 103 Multi turn Trimpot Potentiometer / Variable Resistor
There are lots of trimpots out there. Some are very large, some so small they require a screwdriver. Here at Electrobes, we just needed a simple one that worked. This 10K trimmable potentiometer has a small knob built right in and it’s breadboard friendly to boot! Perfect for your next LCD contrast adjuster, opamp setting, or volume level. This is 3296W model 103 within the datasheet.
220K Ohm Axial 1/4W Resistor
This resistor has 220K value and 1/4W power. It is an Quarter Watt Resistor.
Resistance from electronic circuit elements; By limiting the current passing through the circuit, it has many different usage areas besides main objectives such as voltage division, transforming electrical energy to heat (resistance), especially in the protection of sensitive circuit elements.
10K Ohm Rotary Potentiometer Variable Resistor Trimpot with Lever
10K Ohm Rotary Potentiometer Variable Resistor Trimpot with Lever
This 10K trimmable potentiometer has a small knob built right in and it’s breadboard friendly to boot! Perfect for your next LCD contrast adjuster, opamp setting, or volume level. This model is B10K within the datasheet.
