Modules and Breakout Boards, Wireless Communication
Compare
Ublox-NEO-M8M GPS Positioning Module GPS Navigation Module UBLOX High Precision
Ublox-NEO-M8N GPS Positioning Module GPS Navigation Module UBLOX High Precision
Ublox-NEO-M8M GPS Positioning Module GPS Navigation Module UBLOX High Precision
Features:
- with SMA antenna interface, can be connected to a variety of active antennas
- comes with EEPROM, can save configuration information
- comes with a rechargeable backup battery, you can power down to maintain ephemeris data
- Micro USB interface, only need a USB cable to connect to the computer, you can use the host computer software, self-supplied serial port function, no need to purchase other serial port module
- compatible with 5V/3.3V voltage, adapt to various types of single-chip
- support Raspberry Pi, plug in USB use, no need to drive
- exclusive with GPS modification configuration method, illustrated
- support firmware upgrade
- self-contained signal amplifier
Functions of the pins:
- VCC: Power supply (3.3-5V)
- GND: connect Mass
- TXD: module serial port transmission pin (TTL level, cannot be directly connected to RS232 level), can be connected to the microcontroller’s RXD
- RXD: serial port of the pin receiving port (TTL level, can not be directly connected to RS232 level), can be connected to the TXD of single chip microcomputer
- PPX: pulse output angle
SKU: 0173
Categories: Modules and Breakout Boards, Wireless Communication
Tags: Antenna, GPS, GPS Navigation Module, GPS Positioning Module, GPS Tracking device, tracking module, Ublox, Ublox-NEO-M8N
- Supply voltage: 3.3V – 5V DC
- Operating current: 45mA
- baud rate: 9600 (configurable from 4800 to 115200)
- Navigation update rate: up to 5Hz (1HZ by default)
- Warm-up time: 27 seconds (fastest) hot start start: 1 second
- Operating temperature range: -40 to +85°C
- Separate GPS antenna 18 x 18 mm
- Dimensions: 22 x 30 x 13 mm
- Weight: 19g
Related products
-
Modules and Breakout Boards, IOT Development Board
NodeMCU Amica V2 ESP8266 WiFi Module
0 out of 5(0)- NodeMCU ESP8266 Wifi Development Board – Amica V2
- Breadboard Friendly
- The Development Kit based on ESP8266, integrates GPIO, PWM, IIC, 1-Wire and ADC all in one board.
- Power your development in the fastest way combining with NodeMCU Firmware!
- CP2102 based USB-TTL included, plug & play
- 10 GPIO, every GPIO can be PWM, I2C, 1-wire
- PCB antenna
SKU: 0109 -
Modules and Breakout Boards, Arduino, Arduino Boards
Arduino UNO R3 16U2 DIP Version With Cable
0 out of 5(0)Arduino Uno is a microcontroller board based on 8-bit ATmega328P microcontroller. It consists a 16MHz crystal oscillator, serial communication, voltage regulator, etc. to support the microcontroller.
SKU: 0100₨ 1,900₨ 2,000 -
Modules and Breakout Boards, Arduino, Arduino Boards
ARDUINO Leonardo ATmega32u4 BOARD
0 out of 5(0)Arduino Leonardo Development Board is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins, a 16 MHz crystal oscillator, a micro USB connection. Buy online in Pakistan at Electrobes.
SKU: 0105₨ 1,600