-
Audio & Visual, LCD & Display
10.1 Inch HDMI LCD Display Touch Panel HDW101_001L 1024×600 Pixels
The 10.1 inch HDMI LCD Capacitive Touch Display is a Seamless Human Machine Interface (HMI) display module solution that provides a control and visualization interface for any Raspberry Pi and Arduino kits.
SKU: 1847 -
-
Discrete Electronic Components, General Electronics
Digital Water Quality Tester TDS EC Meter Range 0-9990 Multifunctional Water Purity Temperature Meter TEMP PPM Tester
-14%
Discrete Electronic Components, General ElectronicsDigital Water Quality Tester TDS EC Meter Range 0-9990 Multifunctional Water Purity Temperature Meter TEMP PPM Tester
The LCD screen is convenient for reading and recording data and stores readings for easy reading and recording, and the digital LCD TDS meter is used to test the purity of the filter water quality, to check the performance of your water filter and to check the hardness (1 grain = 17 ppm) .To ensure that you always drink clean and safe water, the TDS tester is recommended for every family.
Auto-off function: Switch off the meter after 5 minutes of non-use to save the battery
Automatic temperature compensation function when the meter is in measurement mode.SKU: 1565 -
3D Printer Parts, CNC & 3D Printers
8mm Linear Rail Shaft Smooth Rod For CNC Machine And 3D Printer
-25%
3D Printer Parts, CNC & 3D Printers8mm Linear Rail Shaft Smooth Rod For CNC Machine And 3D Printer
8mm M8 Case Hardened Chrome Plated Linear Motion Rod Shaft Guide for CNC machines and 3d printers linear sliding motion XYZ axis available in 200-1000mm lengths. We have all 3d Printer and CNC machines parts in Pakistan
SKU: CNC-112
Best Sellers
Recently Added
Arduino UNO R3 16U2 DIP Version With Cable
Arduino UNO R3 16U2 DIP Version With Cable
Arduino Uno is a microcontroller board based on 8-bit ATmega328P microcontroller. It consists a 16MHz crystal oscillator, serial communication, voltage regulator, etc. to support the microcontroller.
10K Ohm 103 Multi turn Trimpot Potentiometer / Variable Resistor
10K Ohm 103 Multi turn Trimpot Potentiometer / Variable Resistor
There are lots of trimpots out there. Some are very large, some so small they require a screwdriver. Here at Electrobes, we just needed a simple one that worked. This 10K trimmable potentiometer has a small knob built right in and it’s breadboard friendly to boot! Perfect for your next LCD contrast adjuster, opamp setting, or volume level. This is 3296W model 103 within the datasheet.
220K Ohm Axial 1/4W Resistor
This resistor has 220K value and 1/4W power. It is an Quarter Watt Resistor.
Resistance from electronic circuit elements; By limiting the current passing through the circuit, it has many different usage areas besides main objectives such as voltage division, transforming electrical energy to heat (resistance), especially in the protection of sensitive circuit elements.
10K Ohm Rotary Potentiometer Variable Resistor Trimpot with Lever
10K Ohm Rotary Potentiometer Variable Resistor Trimpot with Lever
This 10K trimmable potentiometer has a small knob built right in and it’s breadboard friendly to boot! Perfect for your next LCD contrast adjuster, opamp setting, or volume level. This model is B10K within the datasheet.
