Shop
Showing 1105–1152 of 1998 resultsSorted by latest
-
3D Printer Parts, CNC & 3D Printers, CNC Machine Parts
3D Printer Accessories Hot Bed Aluminum Substrate Print Sticker
3D Printer Parts, CNC & 3D Printers, CNC Machine Parts3D Printer Accessories Hot Bed Aluminum Substrate Print Sticker
- Build sheet adheres to the hot bed to help the filament sticked during printing, while also help removal of the printed model afterwards.
- Compatible with ABS, PLA, HIPS and other filament.
- Single sheet design installs more quickly and with fewer bubbles than tape or films.
- Durable construction allows for multiple uses with either the same or different filament materials.
SKU: CNC-121 -
Converters, Modules and Breakout Boards
XL4015 5A DC-DC Voltage Step Down Buck Converter 4-38v Input
The XL4015 power module is a DC to DC step-down (BUCK) power module that operates at a switching frequency of 180kHz. In such high frequency, it provides smaller sized filter components compared with low frequency switching regulators.
SKU: 1327 -
Planes And Copters, Robotics & Machines
Flysky FS-i6X 10CH Transmitter 2.4GHz AFHDS 2A RC Transmitter With FS-iA10B i-Bus Receiver
Planes And Copters, Robotics & MachinesFlysky FS-i6X 10CH Transmitter 2.4GHz AFHDS 2A RC Transmitter With FS-iA10B i-Bus Receiver
Original Flysky 10CH FS-i6X I6X 2.4GHz AFHDS Transmitter FS-iA10B Receiver For RC Airplane, Drones, Boat, Multi-rotor and Quadcopter available at electrobes at best price to shop in Pakistan
SKU: RC-012 -
Modules and Breakout Boards, STM Boards
STM32f4 STM32f407 Discovery Kit Arm Cortex-M4 Development Board
-32%
Modules and Breakout Boards, STM BoardsSTM32f4 STM32f407 Discovery Kit Arm Cortex-M4 Development Board
The STM32f4 STM32f407 Discovery Kit for STM32F407 kit powers the capabilities of the STM32f4 STM32f407 Discovery Kit high-performance microcontrollers, to allow users to easily develop applications featuring audio. It includes an ST-LINK embedded debug tool, one ST-MEMS digital accelerometer, a digital microphone, one audio DAC with the integrated class D speaker driver, LEDs, push-buttons and a USB OTG micro-AB connector.
SKU: 1324 -
Modules and Breakout Boards, STM Boards
STM32F303 Discovery Evaluation Development Board
The STM32F3DISCOVERY is a discovery kit based on STM32F303VCT6 microcontroller with 256KB flash, 48KB RAM. The STM32F303VCT6 is based on the high performance ARM Cortex-M4 32bit RISC core with FPU operating at a frequency of up to 72MHz and embedding a floating point unit (FPU), a memory protection unit (MPU) and an embedded trace macrocell (ETM). The STM32F3DISCOVERY helps to discover the STM32F3 series Cortex-M4 mixed signals features and to develop our applications easily.
SKU: 1323 -
Essential tools, Instruments & Tools
Lt-86C Magnifying Glass Desk Lamp 5x Magnification lamp with Large Glass 120mm Diameter
Essential tools, Instruments & ToolsLt-86C Magnifying Glass Desk Lamp 5x Magnification lamp with Large Glass 120mm Diameter
- Fully adjustable arm: this convenient design measures 17.7in.x18in., the durable, slender pole pivotes easily in any direction, bringing light exactly where you need it
- Super bright reading and task lamp: designed for aging eyes, this professional-quality LED magnifying lamp has a 5 in. Dia lens that is made of standard green glass
- High-quality SMD LEDs: this lamp has 30 energy-saving SMD LEDs that are guaranteed to last, the low voltage saves your money on electricity and like most LEDs these SMDs give off almost no heat
- Powerful 5 in. lens: the powerful lens magnifies objects 1.75 times or 2.25 times or 3 times (for options), bringing focus and clarity to reading and watching in lab or cleanroom
SKU: 1315 -
Audio & Visual, LCD & Display
5 Inch 800*480 TJC Capacitive Touch HMI Serial Interface Display For Arduino and Raspberry Pi
Audio & Visual, LCD & Display5 Inch 800*480 TJC Capacitive Touch HMI Serial Interface Display For Arduino and Raspberry Pi
The 5″ TJC HMI LCD Touch Display is a Seamless Human Machine Interface (HMI) display module solution that provides a control and visualization interface for any Raspberry Pi and Arduino kits.
SKU: 1322 -
Audio & Visual, LCD & Display
7 Inch 800*480 TJC Capacitive Touch HMI Serial Interface Display For Arduino and Raspberry Pi
-13%
Audio & Visual, LCD & Display7 Inch 800*480 TJC Capacitive Touch HMI Serial Interface Display For Arduino and Raspberry Pi
The 7″ TJC HMI LCD Touch Display is a Seamless Human Machine Interface (HMI) display module solution that provides a control and visualization interface for any Raspberry Pi and Arduino kits.
SKU: 1320 -
Discrete Electronic Components, General ICs, ICs, Logic Gates
CD4073 CMOS Triple 3-Input AND Gate Breadboard-Friendly IC DIP-14
Discrete Electronic Components, General ICs, ICs, Logic GatesCD4073 CMOS Triple 3-Input AND Gate Breadboard-Friendly IC DIP-14
The CD4073BE is a 3-input CMOS Triple AND Gate provides the system designer with direct implementation of the AND function and supplement the existing family of CMOS gates.SKU: 1178 -
-
Batteries & Chargers
1S-8S Lipo Battery Tester Voltage Monitor and Low Voltage Alarm
- Input: 1S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- Cell Voltage Display Range: 0.5v-4.5v
- Total Voltage Display Range: 3.7-36v
- Alarm set values: Off or 2.7-3.8v
SKU: 1163 -
Modules and Breakout Boards, Sensors & Transducers, Temperature Sensor
DS18B20 Temperature Sensor Waterproof Digital Thermal Probe Temp Sensor – 1M Lead Length
Modules and Breakout Boards, Sensors & Transducers, Temperature SensorDS18B20 Temperature Sensor Waterproof Digital Thermal Probe Temp Sensor – 1M Lead Length
- Sensors For Arduino DS18b20 Temperature Sensor Module
- Product Type : Temperature sensor Module
- Voltage range : 3.5 – 5V DC
- Length : 100 cm.
SKU: 1164 -
IOT Development Board, Modules and Breakout Boards
HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module
- The HM-10 Bluetooth module combines the powerful and programmable Texas Instruments CC2541 Chipset with the required components to start right away with your BLE development.
- The module offers an on-board voltage regulator and is TTL-level and 5 V tolerant.
- The Bluetooth-SoC can be accessed via UART interface and supports AT-Commands for setup.
- It supports full Bluetooth 4.0 standard and can be used for your Arduino or microcontroller to Android or iOS communication projects.
- This module can be used to replace HC-05, HC-06 and HC-07 devices.
- This module can also be configured and used as an iBeacon for used with Apple devices.
SKU: 1165 -
IOT Development Board, Modules and Breakout Boards
EM18 – 125Khz RFID Reader Module
EM-18 is a nine pin device. Among nine pins, 2 pins are not connected, so we basically have to consider seven terminals.
Pin Number Description VCC Should be connected to positive of power source. GND Should be connected to ground. BUZZ Should be connected to BUZZER NC No Connection NC No Connection SEL SEL=1 then o/p =RS232 SEL=0then o/p=WEIGAND
TX DATA is given out through TX of RS232 DATA1 WEIGAND interface DATA HIGH pin DATA0 WEIGAND interface DATA LOW pin SKU: 1166 -
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry Pis
Raspberry Pi 4 Case, Raspberry Pi 4 Fan ABS Case With Cooling Fan – Red and White
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry PisRaspberry Pi 4 Case, Raspberry Pi 4 Fan ABS Case With Cooling Fan – Red and White
- Newest ABS case for Raspberry Pi 4 Model B.
- Full access to all Raspberry Pi 4 ports, such as GPIO port, Micro HDMI port, USB port, SD CARD slot.
- Support install the cooling fan on the cover , don’t worry the mainboard be over heat.
- Sliding design cover , make it more convenient to use.
- ABS material is stronger and light , won’t block the WiFi and bluetooth.
SKU: 1167 -
Modules and Breakout Boards, Proximity/Distance Sensors, Sensors & Transducers
Proximity Switch SN04-N NPN Metal Detection Sensor for Metal Inspection
Modules and Breakout Boards, Proximity/Distance Sensors, Sensors & TransducersProximity Switch SN04-N NPN Metal Detection Sensor for Metal Inspection
This inductive proximity sensor will detect the presence of a metallic object within 5mm of the surface of the sensor. The detection distance may vary slightly depending on the shape, size, and type of metal the object is made of. It can detect through thin, non-metallic materials and has an LED indicator that turns on when the device is powered, and increases in brightness when an object is detected.
SKU: 1162 -
Hardware, Instruments & Tools
JCTOP EW4065 Precise Wire Stripper/Cutter Tool Clamp and Steel Wire Cable Cutter Plier Stripping Tool 10-18AWG
Hardware, Instruments & ToolsJCTOP EW4065 Precise Wire Stripper/Cutter Tool Clamp and Steel Wire Cable Cutter Plier Stripping Tool 10-18AWG
JCTOP EW4065 is a Precise gear grinding wire stripper / line clamp / wire cutter / plier. It is the simplest and fastest way to strip plastic or rubber insulation of single, multiple cables and wires. You just need to insert a wire into the jaws and squeeze the handles, now you’re finished.
SKU: 1195 -
Planes And Copters, Robotics & Machines
5045 3-Blade Prop CW CCW Plastic Propeller Blade for RC Airplane Aircraft Quadcopter
Planes And Copters, Robotics & Machines5045 3-Blade Prop CW CCW Plastic Propeller Blade for RC Airplane Aircraft Quadcopter
- 5030 Direct Drive Propellers for RC Airplane Aircraft Spare Parts
- 3-Blades design
- This shape is constructed for direct drive applications.
- Compatible: Use For RC Plane
- Comments: For Electric flight only. Do not modify or attempt to use with Glow Engines.
SKU: 1159 -
Discrete Electronic Components, General Electronic Boards, Light Dependent Resistors, Modules and Breakout Boards, Resistors
Photosensitive Resistor LDR Light Sensor Module with Digital + Analog Output
Discrete Electronic Components, General Electronic Boards, Light Dependent Resistors, Modules and Breakout Boards, ResistorsPhotosensitive Resistor LDR Light Sensor Module with Digital + Analog Output
Features :
- It comes with Mounting Hole Screw.
- Easy to install
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
- Output: DO digital switch output (0 and 1), AO analog voltage output Compatible with Arduino, Raspberry, and other microcontroller board.
SKU: 1127 -
Motor and Gears, Robotics & Machines
JGB37-550 DC 12V 160RPM High Torque Metal Gear DC Motor
DC 12V 160 RPM Slow Speed High Torque Geared DC Motor has stable and reliable performance along with high torque and low noise. This motor is low-speed and high-power, and is generally powered by a lithium battery. The motor generates a low RPM which is very ideal for making gripper to pick and place heavy objects with greater accuracy.
SKU: 1197 -
Motor and Gears, Robotics & Machines
JGB37-550 DC 12V 680RPM High Torque Metal Gear DC Motor
DC 12V 680 RPM High Speed Large Torque Motor has stable and reliable performance. It is very easy to disassemble, clean and maintain. Highlighted feature of this module is excellent quality and long service life. It is micro, compact and light weight. This motor is high-speed and high-power, and is generally powered by a lithium battery. This DC motor can save electricity to a great extend. Environmental protection is the another inevitable feature of this DC motor. The sound at DC 12V is relatively loud, because the motor itself has a fan, coupled with high speed, the motor’s own no-load current is 1.25 A, so the noise is reasonable, but the torque of this motor is very strong. At the same speed, its torque should be more than twice that of the ordinary 555 geared motor.
SKU: 1198 -
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry Pis
Official Raspberry Pi Zero W 2W Enclosure Case
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry PisOfficial Raspberry Pi Zero W 2W Enclosure Case
The Raspberry Pi Zero Case has been designed to fit both the Pi Zero, Pi Zero W, Pi zero 2W.
The case consists of two parts. It has a standard base featuring a cut-out to allow access to the GPIO, and a choice of three lids: a plain lid, a GPIO lid (allowing access to the GPIO from above), and a camera lid (which, when used with the short camera cable supplied, allows the Raspberry Pi Camera or Camera Noir to be fitted neatly inside it).
SKU: 1119 -
