Shop
Showing 1441–1488 of 1998 resultsSorted by latest
-
Discrete Electronic Components, ICs, Power Optimizer & Circuit Protection
0.5A 6V TO-252 SMD Voltage Regulator 78M06
Discrete Electronic Components, ICs, Power Optimizer & Circuit Protection0.5A 6V TO-252 SMD Voltage Regulator 78M06
Voltage regulators are very common in electronic circuits. They provide a constant output voltage for a varied input voltage. In our case the 78M06 IC is an iconic regulator IC that finds its application in most of the projects to regulate variable voltages to a fixed 6V output. This IC is the TO-252 case of 7806 IC to be used on SMD circuits.
SKU: 0884 -
Analog, Discrete Electronic Components, ICs
CD4049 Hex Inverter Buffer IC
CD4049 is a general purpose Hex Inverter Buffer IC. CD4049 holds six inverter gates on a single package. The IC works on the voltage range from 3V to 15V excessive voltage more than 15V will destroy the IC. So provide input voltage in the range of 3V to 15V. The IC invert the binary input i-e if we apply 1 at input it will out 0 and vice versa
SKU: 0886 -
Discrete Electronic Components, ICs, Logic Gates
CD4066 Quad Bilateral Switch – Multiplexer
The CD4066BE is a Quad Bilateral Switch IC, that is, it has four switches which can be controlled individual using a control pin. These switches can conduct in both the directions making it bilateral, it is commonly used for multiplexing analog or digital signals.
SKU: 0887 -
Audio & Visual, LCD & Display
8×2 LCD Display 0802 Character Display – Yellow Green
WH0802A1 is an 8 character by 2 lines 8×2 character LCD display. This 8×2 LCD module is available in various LCD panel colors including gray, yellow/green and blue LCD options. 0802 LCD module is built in with ST7066 controller (or equivalent). WH0802A1 model has different interfaces available, it’s default 6800 4/8-bit parallel 6800 interface, also it’s optional SPI and I2C by using RW1063 IC.
SKU: 0956 -
Audio & Visual, LCD & Display
0.96 Inch 128×64 IIC I2C OLED Blue Display Module For Arduino
This OLED display module is small, only 0.96″ inch diagonal, it is made of 128×64 individual blue OLED pixels, each one is turn on or off by the controller chip. It has white backlight and can work without backlight, OLED display is higher compared to that of LCD display, you will like the miniature for its crispness. This module uses I2C to communicate with microcontroller such as Arduino.
SKU: 0537 -
Audio & Visual, LCD & Display
1.3 Inch 128×64 IIC I2C OLED Blue Display Module For Arduino
This OLED display module is small, only 1.3″ inch diagonal, it is made of 128×64 individual blue OLED pixels, each one is turn on or off by the controller chip. It has white backlight and can work without backlight, OLED display is higher compared to that of LCD display, you will like the miniature for its crispness. This module uses I2C to communicate with microcontroller such as Arduino.
SKU: 0955 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
5Kg Scale Bar Load Cell Weight Sensor
General Sensors, Modules and Breakout Boards, Sensors & Transducers5Kg Scale Bar Load Cell Weight Sensor
This straight bar load cell (sometimes called a strain gauge) can translate up to 5kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.
SKU: 0947 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
20Kg Scale Bar Load Cell Weight Sensor
General Sensors, Modules and Breakout Boards, Sensors & Transducers20Kg Scale Bar Load Cell Weight Sensor
This straight bar load cell (sometimes called a strain gauge) can translate up to 20kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.
SKU: 0949 -
Converters, Modules and Breakout Boards
PCF8591 ADC & DAC Analog to Digital and Digital to Analog Converter Module
-19%
Converters, Modules and Breakout BoardsPCF8591 ADC & DAC Analog to Digital and Digital to Analog Converter Module
The PCF8591 is a monolithically integrated, and a separate power supply, low-power, 8-bit CMOS data acquisition devices. The PCF8591 has the four analog inputs, one analog output and a serial I2C bus interface. PCF8591 three address pins A0, A1 and A2 can be used in hardware address programmed 8 PCF8591 device allows access to the same I2C bus, without the need for additional hardware. On the PCF8591 device input and output of the address, control and data signals are transmitted in serial fashion via the two-wire bidirectional I2C bus.
SKU: 0764 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
RCWL-0516 Doppler Radar Microwave Sensor Module Human Induction Detector Switch
General Sensors, Modules and Breakout Boards, Sensors & TransducersRCWL-0516 Doppler Radar Microwave Sensor Module Human Induction Detector Switch
This mini doppler radar sensor module is equipped with supporting DC 4-28V wide voltage This is a mini radar motion sensor module is equipped with RCWL-9196 chip based on the doppler microwave induction technology. It will automatically comtinuously output the high level TTL signel when there is motion. 360 degree no blind angle detection and maximum 7m sensoring distance with adjustable delay time and sensitivity. It is perfect for DIY microwave motion sensor light switch, human sensor toys, smart security devices, etc.
SKU: 0761 -
General Electronic Boards, Modules and Breakout Boards
LM386 Audio Amplifier Module
The LM386 Audio Amplifier Module is a basic signal amplifier with 200X Gain, designed to accept incoming audio signals and boost them while maintaining the correct sound levels and ratios. It is a low-voltage Electronic Module with a small form factor that can read incoming signals from audio devices like radios, guitar pickups and microphones to amplify them for audio output devices like speakers, headphones or additional digital modules. It features an internal gain of 20x to keep the external parts count as low as possible, and an onboard potentiometer for manual on-the-fly volume adjustments.
SKU: 0763 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
10Kg Scale Bar Load Cell Weight Sensor
General Sensors, Modules and Breakout Boards, Sensors & Transducers10Kg Scale Bar Load Cell Weight Sensor
This straight bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.
SKU: 0948 -
General Electronic Boards, Modules and Breakout Boards
HX711 Pressure Sensor Load Cell Amplifier Module
General Electronic Boards, Modules and Breakout BoardsHX711 Pressure Sensor Load Cell Amplifier Module
The HX711 Dual-Channel 24 Bit Precision A/D weight Pressure Sensor Load Cell Amplifier and ADC Module is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight.
SKU: 0762 -
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry Pis
Raspberry Pi 4 model B 2GB Computer Development Board
-3%
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry PisRaspberry Pi 4 model B 2GB Computer Development Board
Raspberry Pi 4 has the ability to interact with the outside world & has been used in digital maker projects. Apart from that USB 3, dual HDMI, an upgraded CPU, camera and SD card slot and massive memory would provide much better performance to run applications.
SKU: 0747 -
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry Pis
Raspberry Pi 4 model B 4GB Computer Development Board
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry PisRaspberry Pi 4 model B 4GB Computer Development Board
Raspberry Pi 4 has the ability to interact with the outside world & has been used in digital maker projects. Buy Online Pi 4 with electrobes in Pakistan. Apart from that USB 3, dual HDMI, an upgraded CPU, camera and SD card slot and massive memory would provide much better performance to run applications.
SKU: 0748 -
Light and Infrared Sensors, Modules and Breakout Boards, Sensors & Transducers
DC 12V Human Infrared Sensor Switch Light Sensor Infrared PIR Motion Sensor Switch 180 Degree
Light and Infrared Sensors, Modules and Breakout Boards, Sensors & TransducersDC 12V Human Infrared Sensor Switch Light Sensor Infrared PIR Motion Sensor Switch 180 Degree
This is a 12V human infrared sensors, pyroelectric infrared technology, the use of industrial district-level chip, intelligent control, set energy saving, convenient and environmentally friendly one, very convenient. This module also comes in 220V AC variant.SKU: 0766 -
Robotics & Machines, Stepper Motors & Drivers
TB6560 3A Single Axis Controller Stepper Motor Driver
Tb6560 stepper motor driver best price Pakistan 3A Single-Axis CNC Router Stepper Motor Driver Board is based on TB6560AHQ chip. It will significantly increase torque and ease of configuration of larger motors. Cheap and great driver for CNC or 3D printer.
SKU: 0758 -
Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & Power
ACS712 30A 30 Amp Current Sensor Module
Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & PowerACS712 30A 30 Amp Current Sensor Module
The ACS712 Module uses the famous ACS712 IC to measure current using the Hall Effect principle. The module gets its name from the IC (ACS712) used in the module, so for you final products use the IC directly instead of the module.
SKU: 0757 -
Modules and Breakout Boards, Sensors & Transducers
ACS712 20A 20 Amp Current Sensor Module
The ACS712 Module uses the famous ACS712 IC to measure current using the Hall Effect principle. The module gets its name from the IC (ACS712) used in the module, so for you final products use the IC directly instead of the module.
SKU: 0756 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & Power
ACS712 5A 5 Amp Current Sensor Module
General Sensors, Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & PowerACS712 5A 5 Amp Current Sensor Module
The ACS712 Module uses the famous ACS712 IC to measure current using the Hall Effect principle. The module gets its name from the IC (ACS712) used in the module, so for you final products use the IC directly instead of the module.
SKU: 0755 -
Modules and Breakout Boards, Sensors & Transducers
Water Level Sensor Liquid Depth Measuring Module for Arduino
Modules and Breakout Boards, Sensors & TransducersWater Level Sensor Liquid Depth Measuring Module for Arduino
A water sensor is a device used in the detection of the water level for various applications. Water sensors can come in several variations that include ultrasonic sensors, pressure transducers, bubblers, and float sensors.
SKU: 0754 -
Modules and Breakout Boards, Robotics & Machines, Stepper Motors & Drivers
L298N H-Bridge Motor Driver Module
Modules and Breakout Boards, Robotics & Machines, Stepper Motors & DriversL298N H-Bridge Motor Driver Module
The L298 motor driver module features:
- Finned Aluminum Heatsink for the L298 IC
- Clamping Rectifiers
- Filter Capacitors for logic-power and moto-power busses
- Onboard 5-Volt DC Regulator (A jumper selects between external 5-Volt power or the onboard 5-volt regulator.)
- Screw Terminal connections for ground, motor power, 5-volt power, and motor outputs
- 0.1 inch-pitch header pins for logic inputs
- Jumpers to tie the enable inputs to ground (if desired)
- Switches up to 2 amps per channel
SKU: 0753 -
Robotics & Machines, Stepper Motors & Drivers
DRV8825 Stepper Motor Driver Soldered Pins with Heat Sink
Robotics & Machines, Stepper Motors & DriversDRV8825 Stepper Motor Driver Soldered Pins with Heat Sink
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 micro stepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of the A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
SKU: 0752 -
Modules and Breakout Boards
CH340 USB to TTL (Serial) HW 597 Converter Module
A simple USB to serial converter with selectable voltage through a jumper. Specifications:
- 3.3V-5V TTL voltages
- Converts TTL logic levels to computer RS232 levels
- Power supplies: 5V, 3.3V, GND (min)
- RX (3.3V-5V)
- TX (3.3V-5V)
SKU: 0751 -
Converters, Modules and Breakout Boards
CP2102 USB 2.0 to TTL UART 6PIN Serial Converter
CP2102 chip from SiLabs is a single chip USB to UART bridge IC. It requires minimal external components. CP2102 can be used to migrate legacy serial port based devices to USB. Hobbyists can use it as a powerful tool to make all kinds of PC interfaced projects. This module help all those who are comfortable with RS232/Serial Communication protocol, to build USB devices very easily.
SKU: 0617 -
Heat Sinks
Heat Sink Aluminium made Self Adhesive Complete Set for Raspberry Pi
A complete set of heats sinks for Rapsberry pi, which provide coolant facility to Raspberry Pi. It is made of Pure Copper for better performance. The fins increase the area of the board and thus provide for greater heat transfer.
SKU: 0900 -
Modules and Breakout Boards
HC SR505 PIR Motion Sensor Module
HC-SR505 is mini PIR (Passive Infra Red) motion sensor module, which as the name implies used for detecting the motion of a body in front of it. The device works based on infrared technology and it can automatic control by itself with high sensitivity and high reliability. Because of the minimum size and low-power operation mode, it widely used in battery-powered applications.
SKU: 0749 -
-
Mechanical, Motors and Driver, Robotics & Machines, Stepper Motors & Drivers
IBT-2 43A H-bridge Double BTS7960 High Power Motor Driver Module
Mechanical, Motors and Driver, Robotics & Machines, Stepper Motors & DriversIBT-2 43A H-bridge Double BTS7960 High Power Motor Driver Module
The drive uses an H-bridge driver module that composed by Infineon power drive chip BTS7960, with overheating and over-current protection. Double BTS7960 H-bridge driver circuit, with strong drive and braking effect, use 74HC244 chip effectively isolate the microcontroller and the motor drive! High Current up to 43A!
SKU: 0740 -
Audio & Visual, General Sensors, Modules and Breakout Boards, Sensors & Transducers
AS608 Fingerprint Reader Optical Sensor Module
Audio & Visual, General Sensors, Modules and Breakout Boards, Sensors & TransducersAS608 Fingerprint Reader Optical Sensor Module
- Optical fingerprint capture for accurate biometric identification
- Compact, low-power design ideal for embedded systems and IoT devices
- Easy serial/UART integration with Arduino, Raspberry Pi, STM32 and other MCUs
- Fast enrollment and verification with onboard template management
- Durable touch surface rated for repeated daily use
- Developer-friendly with example code and rapid prototyping support
SKU: 0738 -
Audio & Visual, General Sensors, Modules and Breakout Boards, Sensors & Transducers
R307 Optical Fingerprint Scanner Module for Arduino
Audio & Visual, General Sensors, Modules and Breakout Boards, Sensors & TransducersR307 Optical Fingerprint Scanner Module for Arduino
- R307 is an optical fingerprint module integrates a fingerprint algorithm chip with functions such as fingerprint entry, image processing, feature extraction, template generation, template storage, fingerprint comparison (1: 1) and fingerprint search (1: N).
- The fingerprint reader can perform secondary development and be embedded in various end products, e.g. For example: access control, presence, safe, car door locks.
- Low power consumption, low cost, small size, excellent performance.
- Professional optical technology, precise module manufacturing technology.
SKU: 0737 -
Cooling Fans, Discrete Electronic Components
DC 12V Cooling Fan 40x40x20mm – Used Condition
- Rated voltage: 12VDC
- Voltage range: 8-13.8VDC
- Rotation speed: 2000 RPM +/- 10%
- Rated current: 0.8A +/- 10%
- Rated power: 1W
- Airflow: 76.72 CFM
- Noise: 33.5dB
- Dimensions: (40 x 40 x 20mm)
- Mounting holes: 0.165″ (4.2mm)
- Life expectancy: 15,000 Hours
SKU: 0773 -
Converters, Modules and Breakout Boards
LM2596 Tripple / Three Variables Buck Adjustable Step Down Power Supply Module DC-DC Converter
Converters, Modules and Breakout BoardsLM2596 Tripple / Three Variables Buck Adjustable Step Down Power Supply Module DC-DC Converter
- Input voltage: 4-35V
- Output Voltage: 1.5-35V (adjustable)
- Output current: rated current 2A, maximum 3A (heat sink required)
- Conversion efficiency: Up to 92% (the higher the voltage, the higher the efficiency)
- Switching Frequency: 150KHz
- Rectifier: Non-Synchronous Rectification
- Module Properties: Non-isolated step-down module (buck)
- Short circuit protection: current limiting
- Operating temperature: Industrial grade (-40 ℃ to +85 ℃) (output power 10W or less)
- Full load temperature rise: 40 ℃
- Load regulation: ± 0.5%
- Voltage regulation: ± 0.5%
- Dynamic response speed: 5% 200uS
- Output ripple:
- Input 12V Output 5V 3A 60mV (MAX)
- Input 24V Output 12V 3A 120mV (MAX)
SKU: 0721 -
Accessories, Adapters, Batteries & Chargers
9V 1000mA / 1 Amp 9W SMPS Power Adapter
- Stabilized Output, low ripple & low interference
- Ideal for CCTV Cameras / Routers / Modems / Cordless Phones / Set Top Boxes / Wireless Devices / POS Machines etc.
- Plug Type – 2 Pin or 3 Pin as per availability
- 5.5mm DC Pin
SKU: 0780 -
Modules and Breakout Boards, Wireless Communication
RFID Tag Key 13.56Mhz Ring Tag Card
1. MIFARE Classic 1K Chip
2. 13.56MHZ
3. Blue color
4. ABS Material, waterproof.
5. With metal ring.
6.can work with RC522 and PN532
7.block 0 can’t change,UID Can’t change,please contact with us if you are not sure about your chip.
8.ISO14443A
MIFARE and MIFARE Classic are trademarks of NXP B.V.SKU: 0733 -
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
2S 3A 7.4V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards2S 3A 7.4V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
2S 3A Li-ion Lithium Battery 7.4V 8.4V 18650 Charger Protection Board Module is a small PCB mounted Li-ion Lithium Battery charger protection module.
SKU: 0731
