Shop
Showing 1777–1824 of 2024 resultsSorted by latest
-
-
-
-
-
-
Light and Infrared Sensors, Modules and Breakout Boards, Sensors & Transducers
Infrared IR Optical Counter Tachometer RPM Speed Measuring Sensor Optocoupler Module
Light and Infrared Sensors, Modules and Breakout Boards, Sensors & TransducersInfrared IR Optical Counter Tachometer RPM Speed Measuring Sensor Optocoupler Module
Hall effect Infrared IR Optical Counter Tachometer RPM Speed Measuring Sensor Optocoupler Module Compatible with most of microcontroller. Buy online in Pakistan.
SKU: 0598 -
-
-
-
-
Connectors, Discrete Electronic Components, Row Headers
2.54mm 40 x 2 Male Row double Headers
- 80 pins
- 80 positions
- 3 AMP
- Breakaway
- 2.54 mm spacing
- 0.1 inch spacing
- Total pin length 11.5 mm
- Total pin length 0.453 inch
- Connector Mating pin length 6 mm
- Connector Mating pin length 0.236 inch
- PCB mating 3.mm
- PCB mating 0.118 inch
- Gold flash pins
- Double Row
- Ideal for Arduino
- Through Hole
SKU: 0583 -
Connectors, Discrete Electronic Components, Row Headers
2.54mm 40 x 2 Female Row double Headers
- 80 pins
- 80 positions
- 3 AMP
- Breakaway
- 2.54 mm spacing
- 0.1 inch spacing
- Total pin length 11.5 mm
- Total pin length 0.453 inch
- Connector Mating pin length 6 mm
- Connector Mating pin length 0.236 inch
- PCB mating 3.mm
- PCB mating 0.118 inch
- Gold flash pins
- Double Row
- Ideal for Arduino
- Through Hole
SKU: 0582 -
-
-
-
Planes And Copters, Robotics & Machines
1000KV A2212 Brushless DC Motor BLDC Rotor for Quadcopter Drone
Planes And Copters, Robotics & Machines1000KV A2212 Brushless DC Motor BLDC Rotor for Quadcopter Drone
This is a brushless outrunner 1000kv motor specifically made for quadcopters and multirotors. 1000 kv motors are perfect for medium size quadcopters F450 frame with 8 inch to 10 inch propellers.
SKU: 0974 -
-
-
Audio & Visual, LCD & Display
2.4 Inch ILI9341 Touchscreen TFT LCD Display Screen Shield Module For Arduino UNO R3 Board
-20%
Audio & Visual, LCD & Display2.4 Inch ILI9341 Touchscreen TFT LCD Display Screen Shield Module For Arduino UNO R3 Board
- Color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor).
- Composed of a color TFT-LCD panel, driver IC, FPC and a back light unit. The module display area contains 320 x 240 pixels.
- The screen uses analog pins A0-A4 for LCD control and touch screen operations, which are in the same position on the UNO and the Mega, so the touch screen should work without any modification.
- The shield comes equipped with a micro SD card reader for easy access to use a software-based SPI library.
- Compatible with Arduino UNO R3 Mega2560 DUE.
SKU: 0177 -
-
Breakout Boards, Modules and Breakout Boards
Tiny RTC I2C DS1307 AT24C32 Real Time Clock Module
- The DS1307 is a low power consumption real-time clock chip with a full BCD code clock calendar, providing accurate timekeeping for various applications.
- Featuring a 24C32 32K I2C EEPROM memory, the chip can store and retrieve data efficiently, ensuring the preservation of important information.
- The clock pin of the DS1307 can be used to provide the clock signal for connected microcontrollers, enabling seamless integration and synchronization within a system.
- This versatile chip allows for cascading of other I2C devices, expanding the functionality and capabilities of the overall system.
- Equipped with a range of advanced features, including leap year compensation, power failure detection, and programmable square wave output, the DS1307 offers reliable and efficient timekeeping solutions.
SKU: 0175 -
Breakout Boards, Modules and Breakout Boards
DS1302 Clock Module Real-Time Clock Module RTC for AVR ARM
Breakout Boards, Modules and Breakout BoardsDS1302 Clock Module Real-Time Clock Module RTC for AVR ARM
The DS1302 is a low-power, trickle-charge real-time clock (RTC) module that tracks seconds, minutes, hours, date, month, day, and year with leap-year compensation up to 2100. It uses a 3-wire serial interface (RST, I/O, SCLK) to communicate with microcontrollers and operates at 2.0V-5.5V, consuming <300nA at 2.0V for battery backup.
SKU: 0174 -
-
DIP Transistors, Discrete Electronic Components, Transistors
TIP31C Bipolar NPN Transistor 100V 3A TO-220
-11%
DIP Transistors, Discrete Electronic Components, TransistorsTIP31C Bipolar NPN Transistor 100V 3A TO-220
The TIP31C is a standard NPN bipolar junction transistor that is often used for medium power
applications. A bipolar junction transistor (BJT) is a three terminal device that is allows for
amplification or switching applications. BJTs consists of three differently doped semiconductor regions,
the collector region, the base region, and the emitter region. TIP31C TRANSISTOR has many replacements like TIP31A, 2N6122, TIP31B, MJE340K, SW4F013. To buy online in Pakistan visit electrobes-com-827299.hostingersite.com.SKU: 0561 -
DIP Transistors, Discrete Electronic Components, Transistors
TIP42C Bipolar PNP Transistor
Power Transistors are transistors which can handle a lot more power in compared to BJTs. Similar to BJTs, the current flow between the collector and the emitter of is controlled by the current flow through the base. TIP42C is a PNP type semiconductor Bipolar high power Transistor. Collector-base voltage of 40V and Collector current of 6A. This type of semi-conductors are available online in Pakistan at electrobes.
SKU: 0557 -
Analog, Discrete Electronic Components, ICs
CD4047 CMOS Low Power Monostable/Astable Multi-vibrator IC
Analog, Discrete Electronic Components, ICsCD4047 CMOS Low Power Monostable/Astable Multi-vibrator IC
CD4047BE is a CMOS Low Power monostable/astable multivibrator mainly used for converting DC current signal to AC signal. CD4047B consists of a gatable astable multivibrator with logic techniques incorporated to permit positive or negative edge-triggered monostable multivibrator action with retriggering and external counting options.
SKU: 0551 -
Converters, Modules and Breakout Boards
RS485 to TTL UART Converter Module
RS485 to TTL / TTL to RS485 converter is a module that allows the TTL interface of the microcontroller to be transferred to the RS485 module / MAX485 module. It is generally used for industrial automation. This module adds lightning protection design and anti-jamming design. When we use it in the field and carry out long distance transmission, we can Connect the GND end of the module to the ground so that lightning protection and anti-interference can be achieved. This Max485 to TTL module is online in Pakistan at electrobes.
SKU: 0168 -
-
Discrete Electronic Components, General ICs, ICs
CD4016 / TC4016 Quad Bilateral Switch IC
• Wide Analog-Input-Voltage Range . . . . . . . . . 0V to 10V
• Low “ON” Resistance
– 45Ω (Typ) . . . . . . . . . . . . . . . . . . . . . . . . . . .VCC = 4.5V
– 35Ω (Typ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC = 6V
– 30Ω (Typ) . . . . . . . . . . . . . . . . . . . . . . . . . .1fcVCC = 9V
• Fast Switching and Propagation Delay Times
• Low “OFF” Leakage Current
• Built-In “Break-Before-Make” Switching
• Suitable for Sample and Hold Applications
• Wide Operating Temperature Range . . . -55oC to 125oC
• HC Types
– 2V to 10V Operation
– High Noise Immunity: NIL = 30%, NIH = 30% of VCC
at VCC = 5VSKU: 0550 -
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
3S 20A 12.6V Cell 18650 Li-ion Lithium Battery Balanced Charging BMS PCB Board with Protection
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards3S 20A 12.6V Cell 18650 Li-ion Lithium Battery Balanced Charging BMS PCB Board with Protection
3S 20A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module. Buy online in Pakistan.
SKU: 0164
