Modules and Breakout Boards
Showing 145–192 of 371 resultsSorted by latest
-
General Sensors, Modules and Breakout Boards, Sensors & Transducers
Liquid pH Sensor With BNC pH Electrode Probe For Arduino
-12%
General Sensors, Modules and Breakout Boards, Sensors & TransducersLiquid pH Sensor With BNC pH Electrode Probe For Arduino
- The pH stands for the power of hydrogen, which is a measurement of the hydrogen ion concentration in the body.
- The total pH scale ranges from 1 to 14.
- 7 considered to be neutral.
- A pH less than 7 is said to be acidic.
- solutions with a pH greater than 7 are basic or alkaline.
- Heating voltage: 5 ± 0.2V (AC · DC)
- Working current: 5-10mA
- Detectable concentration range: PH0-14
- Detection Temperature range: 0-80 ℃
- Component Power: ≤0.5W
SKU: 1418 -
Modules and Breakout Boards, STM Boards
STM8 Development Board STM8S003F3P6 Module
- The development board using Micro USB cable supply, compatible with smart phone lines, data lines is simple and easy to get, but not USB Mini line-powered.
- Use STM8S103F3P6 as the master IC.
- 5V pin’s voltage is the input voltage of the module.
SKU: 1415 -
Modules and Breakout Boards, Proximity/Distance Sensors, Sensors & Transducers
SHARP Distance Measuring Sensor unit 100 to 550 cm -GP2Y0A710K0F with Cable
Modules and Breakout Boards, Proximity/Distance Sensors, Sensors & TransducersSHARP Distance Measuring Sensor unit 100 to 550 cm -GP2Y0A710K0F with Cable
- Operating voltage: 4.5 V to 5.5 V
- Average current consumption: 12 mA (note: this sensor draws current in large, short bursts, and the manufacturer recommends putting a 10 µF capacitor or larger across power and ground close to the sensor to stabilize the power supply line)
- Distance measuring range: 4 cm to 30 cm (1.5″ to 12″)
- Output type: analog voltage
- Output voltage differential over distance range: 2.3 V (typical)
- Update period: 16.5 ± 4 MS
- Size: 44.5 mm × 18.9 mm × 13.5 mm (1.75″ × 0.75″ × 0.53″)
- Weight: 3.5 g (0.12 Oz)
SKU: 1411 -
Modules and Breakout Boards, Relay Boards
Timer Relay 6 To 30V Adjustable Delay Timer
This is a timer relay suitable for your incubator and other time-related projects. Timer relay is a Digital display Led Home Automation Delay Timer Control Switch Module Timer Controller, Operating voltage: 6-30V, support micro USB 5.0V power supply, Can control the device within DC 30V 5A or AC 220V 5A; It can be applied to many fields; wide range of application.
SKU: 1410 -
Accelerometer, Gyroscope & Navigation, Modules and Breakout Boards, Sensors & Transducers
Gy-87 10dof IMU MPU6050 HMC5883L BMP180 Module for Arduino
Accelerometer, Gyroscope & Navigation, Modules and Breakout Boards, Sensors & TransducersGy-87 10dof IMU MPU6050 HMC5883L BMP180 Module for Arduino
MPU9250 GY-9250 9-AXIS 10DOF Accelerometer, Gyroscope, Compass Magnetic Field Sensor Module provides 9-axis Motion Tracking device. Buy online in Pakistan
SKU: 1407 -
Modules and Breakout Boards, STM Boards
ST Link V2 Programmer For STM8 & STM32 Microcontroller
Mini ST-LINK V2, fully consistent with the official version, support for automatic upgrades, support the full range STM32 SWD (only 4pins including SWCLK, SWDIO, and power) and a full range STM8 SWIM (only 4pins including SWIM, Reset and power) download and debug.
SKU: 1409 -
-
Development Boards, Modules and Breakout Boards, STM Boards
ST-LINK V2 (CN) – STM8 / STM32 Programmer & Debugging Emulator
Development Boards, Modules and Breakout Boards, STM BoardsST-LINK V2 (CN) – STM8 / STM32 Programmer & Debugging Emulator
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
SKU: 1408 -
Modules and Breakout Boards, Wireless Communication
JT308 USB 125Khz RFID Card reader module windows
1. MIFARE Classic 1K Chip
2. 13.56MHZ
3. Blue color
4. ABS Material, waterproof.
5. With metal ring.
6.can work with RC522 and PN532
7.block 0 can’t change, UID Can’t change, please contact with us if you are not sure about your chip.
8.ISO14443A
MIFARE and MIFARE Classic are trademarks of NXP B.V.SKU: 1405 -
Microcontrollers & Programmers, Modules and Breakout Boards
51 AVR Programmer ISP USBASP USB ISP Download Cable
Microcontrollers & Programmers, Modules and Breakout Boards51 AVR Programmer ISP USBASP USB ISP Download Cable
Applicable to WIN 8.1/8/7/XP 32-bit/64-bit system computer.
The product can be directly connected with the computer USB port, the real USB download device, through which to connect the target board the microcontroller can be downloaded programming easy to use, especially for notebook computers, desktop computer, through the USB port programming download debugging.SKU: 1406 -
General Electronic Boards, Modules and Breakout Boards
15A 400W MOSFET Trigger Switch Driver Module
The board is of high power MOS trigger switch driver module and control board with field-effect tube to adjust the electronic switch. It adopts imported double MOS parallel active output to show lower internal resistance, greater electric current and power.
Besides it works at 15A,400W under common temperature which satisfies most devices usage and realizes the control of great power devices in a relaxed way.SKU: 0743 -
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry Pis
Raspberry Pi 4 model B 8GB Computer Development Board
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry PisRaspberry Pi 4 model B 8GB Computer Development Board
Raspberry Pi 4 has the ability to interact with the outside world & has been used in digital maker projects. Buy Online Pi 4 with electrobes in Pakistan. Apart from that USB 3, dual HDMI, an upgraded CPU, and massive memory would provide much better performance to run applications.
SKU: 0746 -
Accessories, Batteries & Chargers, Breakout Boards, Modules and Breakout Boards
HW-633 Lithium Battery Protection Module Board for 12-24V Storage Battery
Accessories, Batteries & Chargers, Breakout Boards, Modules and Breakout BoardsHW-633 Lithium Battery Protection Module Board for 12-24V Storage Battery
Battery application: Lead-acid batteries, Solar cells, new energy batteries, Car battery, electric car battery, Lithium-ion battery, polymer battery.
SKU: 1329 -
Audio & Visual, Computer Interface, Modules and Breakout Boards
Mini Thermal Printer for Arduino Development Singlechip Learning
Audio & Visual, Computer Interface, Modules and Breakout BoardsMini Thermal Printer for Arduino Development Singlechip Learning
This package comes with a thermal printer including the print head (it does not require ink), a set of power and data cables, and two plastic shims for panel mounting.
The printer uses very common 2.25″ wide thermal paper, available in any office or stationery supply store. It can fit up to 50 ft of paper in the bay at once.
SKU: 1445 -
Converters, Modules and Breakout Boards
XL4015 5A DC-DC Voltage Step Down Buck Converter 4-38v Input
The XL4015 power module is a DC to DC step-down (BUCK) power module that operates at a switching frequency of 180kHz. In such high frequency, it provides smaller sized filter components compared with low frequency switching regulators.
SKU: 1327 -
Modules and Breakout Boards, STM Boards
STM32f4 STM32f407 Discovery Kit Arm Cortex-M4 Development Board
-32%
Modules and Breakout Boards, STM BoardsSTM32f4 STM32f407 Discovery Kit Arm Cortex-M4 Development Board
The STM32f4 STM32f407 Discovery Kit for STM32F407 kit powers the capabilities of the STM32f4 STM32f407 Discovery Kit high-performance microcontrollers, to allow users to easily develop applications featuring audio. It includes an ST-LINK embedded debug tool, one ST-MEMS digital accelerometer, a digital microphone, one audio DAC with the integrated class D speaker driver, LEDs, push-buttons and a USB OTG micro-AB connector.
SKU: 1324 -
Modules and Breakout Boards, STM Boards
STM32F303 Discovery Evaluation Development Board
The STM32F3DISCOVERY is a discovery kit based on STM32F303VCT6 microcontroller with 256KB flash, 48KB RAM. The STM32F303VCT6 is based on the high performance ARM Cortex-M4 32bit RISC core with FPU operating at a frequency of up to 72MHz and embedding a floating point unit (FPU), a memory protection unit (MPU) and an embedded trace macrocell (ETM). The STM32F3DISCOVERY helps to discover the STM32F3 series Cortex-M4 mixed signals features and to develop our applications easily.
SKU: 1323 -
Modules and Breakout Boards, Sensors & Transducers, Temperature Sensor
DS18B20 Temperature Sensor Waterproof Digital Thermal Probe Temp Sensor – 1M Lead Length
-3%
Modules and Breakout Boards, Sensors & Transducers, Temperature SensorDS18B20 Temperature Sensor Waterproof Digital Thermal Probe Temp Sensor – 1M Lead Length
- Sensors For Arduino DS18b20 Temperature Sensor Module
- Product Type : Temperature sensor Module
- Voltage range : 3.5 – 5V DC
- Length : 100 cm.
SKU: 1164 -
IOT Development Board, Modules and Breakout Boards
EM18 – 125Khz RFID Reader Module
EM-18 is a nine pin device. Among nine pins, 2 pins are not connected, so we basically have to consider seven terminals.
Pin Number Description VCC Should be connected to positive of power source. GND Should be connected to ground. BUZZ Should be connected to BUZZER NC No Connection NC No Connection SEL SEL=1 then o/p =RS232 SEL=0then o/p=WEIGAND
TX DATA is given out through TX of RS232 DATA1 WEIGAND interface DATA HIGH pin DATA0 WEIGAND interface DATA LOW pin SKU: 1166 -
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry Pis
Raspberry Pi 4 Case, Raspberry Pi 4 Fan ABS Case With Cooling Fan – Red and White
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry PisRaspberry Pi 4 Case, Raspberry Pi 4 Fan ABS Case With Cooling Fan – Red and White
- Newest ABS case for Raspberry Pi 4 Model B.
- Full access to all Raspberry Pi 4 ports, such as GPIO port, Micro HDMI port, USB port, SD CARD slot.
- Support install the cooling fan on the cover , don’t worry the mainboard be over heat.
- Sliding design cover , make it more convenient to use.
- ABS material is stronger and light , won’t block the WiFi and bluetooth.
SKU: 1167 -
Modules and Breakout Boards, Proximity/Distance Sensors, Sensors & Transducers
Proximity Switch SN04-N NPN Metal Detection Sensor for Metal Inspection
Modules and Breakout Boards, Proximity/Distance Sensors, Sensors & TransducersProximity Switch SN04-N NPN Metal Detection Sensor for Metal Inspection
This inductive proximity sensor will detect the presence of a metallic object within 5mm of the surface of the sensor. The detection distance may vary slightly depending on the shape, size, and type of metal the object is made of. It can detect through thin, non-metallic materials and has an LED indicator that turns on when the device is powered, and increases in brightness when an object is detected.
SKU: 1162 -
Discrete Electronic Components, General Electronic Boards, Light Dependent Resistors, Modules and Breakout Boards, Resistors
Photosensitive Resistor LDR Light Sensor Module with Digital + Analog Output
Discrete Electronic Components, General Electronic Boards, Light Dependent Resistors, Modules and Breakout Boards, ResistorsPhotosensitive Resistor LDR Light Sensor Module with Digital + Analog Output
Features :
- It comes with Mounting Hole Screw.
- Easy to install
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
- Output: DO digital switch output (0 and 1), AO analog voltage output Compatible with Arduino, Raspberry, and other microcontroller board.
SKU: 1127 -
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry Pis
Official Raspberry Pi Zero Enclosure Case
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry PisOfficial Raspberry Pi Zero Enclosure Case
The Raspberry Pi Zero Case has been designed to fit both the Pi Zero and the Pi Zero W.
The case consists of two parts. It has a standard base featuring a cut-out to allow access to the GPIO, and a choice of three lids: a plain lid, a GPIO lid (allowing access to the GPIO from above), and a camera lid (which, when used with the short camera cable supplied, allows the Raspberry Pi Camera or Camera Noir to be fitted neatly inside it).
SKU: 1119 -
Modules and Breakout Boards, Proximity/Distance Sensors, Sensors & Transducers
NJK-5002C Tubular Proximity Sensor Switch NPN 3 Wire DC 6-36V
Modules and Breakout Boards, Proximity/Distance Sensors, Sensors & TransducersNJK-5002C Tubular Proximity Sensor Switch NPN 3 Wire DC 6-36V
LJ12A3-4-Z/BX NPN NO Proximity Sensor Cylinder Inductive switch work. Anti Vibration, Dust, Water, Oil Prevention, Reverse Power Protection, Short Circuit Protection, Directly Connecting with PLC can Replace Small & Limit Switches.
SKU: 1124 -
Audio & Visual, Camera & Imaging, Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry Pis
Nigh Vision Raspberry Pi Camera Board v1.3 (5MP, 1080p)
Audio & Visual, Camera & Imaging, Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry PisNigh Vision Raspberry Pi Camera Board v1.3 (5MP, 1080p)
Night Vision Raspberry Pi Camera Board v1.3 It’s able to deliver a crystal clear 5MP resolution image, or 1080p HD video recording at 30fps. Buy online in Pakistan.
SKU: 1484 -
Converters, Modules and Breakout Boards
XL6009 DC-DC Step Up Boost Converter 5 – 32V to 5 – 35V 10W (4A)
Converters, Modules and Breakout BoardsXL6009 DC-DC Step Up Boost Converter 5 – 32V to 5 – 35V 10W (4A)
XL6009 module is a non-isolated step-up boost voltage converter featuring adjustable output voltage, high efficiency. It converts input voltage of 5-32V DC to an output voltage of 4-38V DC.
SKU: 1078 -
Modules and Breakout Boards, STM Boards
STM32F103 Blue Pill ARM Cortex-M3 Minimum System Development Board
-21%
Modules and Breakout Boards, STM BoardsSTM32F103 Blue Pill ARM Cortex-M3 Minimum System Development Board
STM32F103C8T6 is a very powerful Microcontroller and with its 32-bit CPU, it can easily beat Arduino UNO in performance. As an added bonus, you can easily program this board using your Arduino IDE (although with some tweaks and additional programmer i.e. USB to U(S)ART converter).
SKU: 1068
