Accelerometer, Gyroscope & Navigation, Modules and Breakout Boards, Sensors & Transducers
Compare
GY-273 HMC5883L Triple Axis Compass Magnetometer Sensor Module
The HMC5883L is a triple-axis magnetometer compass, which uses I2C protocol for communication. This 3-axis compass module consists of an on-board voltage regulator allowing you to power the module with voltages between 3.3V and 6V.
HMC5883L Magnetometer Module Features & Specifications:
- Operating Voltage: 3V to 6V DC
- I2C interface
- 1-2 degree heading accuracy
- Integrated 12-bit ADC
- 160Hz max data rate
- Range of -8 to +8 Gauss
- Needs no external components
- Easy to use with Microcontrollers or even with normal Digital/Analog IC
- Small, cheap and easily available
Package Contents:
- 1 — HMC5883L Triple-Axis Magnetometer Compass GY-273 Module
- 1 — 1×5 pin male header
HMC5883L Pinout Configuration:
Pin Name |
Description |
VCC |
The Vcc pin powers the module, typically with +5V |
GND |
Power Supply Ground |
SCL |
Serial Clock Pin. Connect this pin to the SCL pin of Microcontroller. |
SDA |
Serial Data Pin. Connect this pin to the SDA pin of Microcontroller. |
DRDY |
Data Ready Pin Output. This pin is used to know that when data is ready to be read |
HMC5883L 3-Axis Compass Module Interfacing with Arduino:
Follow the step by step guide to interface the module with Arduino uno board. Visit the link here
SKU: 1075
Categories: Accelerometer, Gyroscope & Navigation, Modules and Breakout Boards, Sensors & Transducers
Tags: 3-axis, Compass, GY 273, HMC5883L, Magnetometer, module, Sensor, Triple Axis
- Type: GY-271
- Operating Voltage : 3 -5 V DC.
- Chipset: HMC5883L.
- Communication: I2C protocol.
- Measuring range: ± 1.3-8 Gauss.
- Dimensions : 14.8 x 13.5 x 3.5 mm.
- Weight: 2 gm.
Related products
-
Modules and Breakout Boards, Sensors & Transducers, General Sensors
Hall Effect Sensor Module Digital + Analog
-
Modules and Breakout Boards, Sensors & Transducers, Temperature Sensor
DHT22 Temperature Humidity Sensor Module
-
Modules and Breakout Boards, Sensors & Transducers, Gas Sensors
MQ-4 Methane/ Natural Gas Sensor Module for Arduino
Modules and Breakout Boards, Sensors & Transducers, Gas SensorsMQ-4 Methane/ Natural Gas Sensor Module for Arduino
- Good sensitivity to Combustible gas in wide range
- High sensitivity to CH4, Natural gas.
- Small sensitivity to alcohol, smoke.
- Fast response Stable and long life
- Simple drive circuit
SKU: 0128