MPU6050 GY-521 6DOF 3 Axis Analog Gyro Sensor + 3 Axis Accelerometer Module
MPU-6050 Module consists of 3 axis accelerometer and 3 axis Gyrometer. MPU-6050 is used to measure motion-related parameters like velocity, acceleration, displacement, orientation, etc.
MPU6050 GY-521 6DOF 3 Axis Analog Gyro Sensor + 3 Axis Accelerometer Module for Arduino
The Three Axis Acceleration + Gyro Breakout (MPU-6050) is a great motion processing module. By combining a MEMS 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor™ (DMP™) capable of processing complex 9-axis Motion Fusion algorithms, the MPU-6050 does away with the cross-axis alignment problems that can creep up on discrete parts.
It is very accurate, as it contains 16-bits analog to digital conversion hardware for each channel. Therefor it captures the x, y, and z channel at the same time. The sensor uses the I2C-bus to interface with the Arduino.
The breakout board for the MPU-6050 makes this tiny QFN package easy to work into your project. Every pin you need to get up and running is brought out, including the auxiliary master I2C bus which allows the MPU-6050 to access external magnetometers and other sensors. The onboard LDO chip enable you to interface the board with 5V & 3V3 MCUs without the need of level shifters.
Features:
- On-board MPU – 6050 integrated 6 axis motion processing chip
- On-board LDO chip, support 5 V / 3.3 V voltage input
- Commonly used pin have been brought out with a standard 2.54mm spacing
- Module support IIC standard communication protocol
- Users can control program of the accelerator full grid sensor in the range of ±2g, ±4g, ±8g and ±16g
- Angular velocity full case sensing range for ±250, ±500, ±1000, and ±2000dps
- Digital Motion Processing™ (DMP™) engine offloads complex Motion Fusion, sensor timing synchronization and gesture detection
- Embedded algorithms for run-time bias and compass calibration. No user intervention required
- On-chip ADC & temperature sensor to measure the MPU-60X0 die temperature
Package Includes:
- 1 x MPU-6050 Module
- 1 x Burg connector Pins(Right angle).
- 1 x Burg connector Pins(Straight).
Interfacing with Arduino:
How to interface MPU6050 gyro + accelerometer sensor module with Arduino
Pinouts of MPU6050:
- Input Voltage: 2.3 – 3.4V
- Chipset: Invensense MPU-6050
- Supply :3-5V (internal regulator)
- Communication modes: I2C
- Chip built-in 16-bit AD Converter
- Data Output – 16 Bit
- Gyroscope range: ± 250 500 1000 2000 ° / s
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- Immersion Gold PCB, Pin pitch 2.54mm
Related products
- Modules and Breakout Boards, Sensors & Transducers, General Sensors
5.8GHZ Microwave Radar Sensor Module XYC-WB-DC Smart Sensoring Switch 6-9M
-9%Modules and Breakout Boards, Sensors & Transducers, General Sensors5.8GHZ Microwave Radar Sensor Module XYC-WB-DC Smart Sensoring Switch 6-9M
It uses Doppler radar technology, With the ability to automatically sensing to control another product, high sensitivity, sensor distance, reliability, wide-angle sensor, wide voltage range and other characteristics. Widely used in lighting conditions, anti-theft alarm is available online at electrobes.com in Pakistan.
SKU: 0133 - Modules and Breakout Boards, Sensors & Transducers, Temperature Sensor
MAX6675 Module + K Type Thermocouple
Modules and Breakout Boards, Sensors & Transducers, Temperature SensorMAX6675 Module + K Type Thermocouple
This temperature sensor and module makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) to provide accurate temperature compensated measurement of the supplied K-Type thermocouple sensor. This sensor is available at electrobes shop online in Pakistan.
SKU: 0141 - Modules and Breakout Boards, Sensors & Transducers, Light and Infrared Sensors
KY-008 650nm 5V laser sensor module for Arduino
- Modules and Breakout Boards, Sensors & Transducers, General Sensors
Piezo Electric Vibration Sensor Module
- Modules and Breakout Boards, Sensors & Transducers, Gas Sensors
MQ-3 Alcohol Ethanol Gas Sensor Module
Modules and Breakout Boards, Sensors & Transducers, Gas SensorsMQ-3 Alcohol Ethanol Gas Sensor Module
- Sensor Type – Semiconductor
- Easy SIP header interface
- Compatible with most of the microcontrollers
- Low-power standby mode
- Requires heater voltage
- Good sensitivity to alcohol gas
- Fast response and High sensitivity
- Long life and low cost
- Requires simple Drive circuit
SKU: 0127