PZEM-004T Current Voltage Multimeter Module AC 80-260V 100A with Current Transformer
PZEM-004T 110V/220V 100A Smart Power Monitor Single Phase Energy Meter Modbus TTL Electric Ammeter AC Volt Watt Meter.
In stock
₨ 1,950
In stock
PZEM-004T Current Voltage Multimeter Module AC 80-260V 100A with Current Transformer
PZEM-004T is the best for the purpose of the DIY project, where we need to measure the voltage, current and power using Arduino/ESP8266/Raspberry Pi like opensource platform. In many electrical projects, engineer directly deals with measurements with few basic requirements like
- High galvanic isolation
- Parameter display
- Direct communication with computer
- Data acquisition and storage with subsequent viewing or copying to the computer.
This module serve all these basic requirements of measurement PZEM-004T as a separate board. The physical dimensions of the PZEM-004T board is 3.1×7.4 cm, The pzem-004t module is bundled with 33mm diameter current transformer coil.
Features:
- Measuring consumed electricity
- Serial interface UART with a speed of 9600
- Supply voltage 5V
- The possibility of connecting LCD or LED displays
Package includes:
1 × Multimeter Module (USB Adapter is not included)
1 × Power Transformer (Random Color)
Note:
1. This is an indoor module and cannot be used outdoors.
2. The load may exceed the power.
3. Wiring is not misconnected.
Function
1. Electrical parameter measurement function such as voltage, current, connected load and total consuption.
2. The power button clear function.
3. Power-down data storage function (cumulative power down before saving).
4. The serial communication function (comes with TTL serial interface, via various terminals communicate with the adapter plate, read, and set the parameters).
Display Format
1. Power: measurement range 0 ~ 22kW
- 0 ~ 10kW within the display format of 0.000 to 9.999;
- Within 10 ~ 22kW display format 10.00 ~ 22.00.
2. Power: measurement range 0 ~ 9999kWh
- 0 ~ 10kWh within the display format of 0.000 to 9.999;
- 10 ~ 100kWh within the display format of 10.00 to 99.99;
- 100 ~ 1000kWh within the display format of 100.0 to 999.9;
- 1000 ~ 9999kWh and above the display format from 1000 to 9999.
3. Voltage: Test Range 80 ~ 260VAC
- Display Format 110.0 ~ 220.0.
4. Current: measurement range 0 ~ 100A
- Display Format 00.00 to 99.99.
Button
A built-in button on the panel, used to make an electricity clear function.
Electricity clear method: Press ZERO key five seconds, then release the button!
Press again to clear the key, the data is cleared and exit charge cleared, cleared so far completed.
Serial Communication
The module is equipped with a TTL serial data communication interface via the serial port can be read and set the relevant parameters; but if you want a device with a USB or RS232 (such as computers) to communicate, then you need to be equipped with different TTL adapter hardware board (USB communication needs with TTL to USB adapter plate; RS232 communication needs with TTL to RS232 adapter plate), the adapter plate of the specific connection details can be found in FIG.
Considerations
1. This module is suitable for indoor, not outdoor use.
2. the applied load should not exceed the rated power.
3. The wiring can not be wrong.
- Working Voltage: 80~260VAC
- Test Voltage: 80~260VAC
- Rated power: 100A / 22000W
- Working Frequency: 45-65Hz
- Measurement accuracy: ±1.0%
- Board size: 18.5 × 3 × 2.2 cm / 2.87 × 1.18 × 0.9″
Related products
- Modules and Breakout Boards, IOT Development Board
NodeMCU Amica V2 ESP8266 WiFi Module
- NodeMCU ESP8266 Wifi Development Board – Amica V2
- Breadboard Friendly
- The Development Kit based on ESP8266, integrates GPIO, PWM, IIC, 1-Wire and ADC all in one board.
- Power your development in the fastest way combining with NodeMCU Firmware!
- CP2102 based USB-TTL included, plug & play
- 10 GPIO, every GPIO can be PWM, I2C, 1-wire
- PCB antenna
SKU: 0109
