Planes And Copters, Robotics & Machines
F550 Hexacopter MultiCopter Frame Kit with Controller Board
Availability:
In stock
₨ 5,000
In stock
- Planes And Copters, Robotics & Machines
1000KV A2212 Brushless DC Motor BLDC Rotor for Quadcopter Drone
Planes And Copters, Robotics & Machines1000KV A2212 Brushless DC Motor BLDC Rotor for Quadcopter Drone
This is a brushless outrunner 1000kv motor specifically made for quadcopters and multirotors. 1000 kv motors are perfect for medium size quadcopters F450 frame with 8 inch to 10 inch propellers.
SKU: 0974
₨ 6,420 for 3 item(s)
Description:
The F550 Hexacopter MultiCopter Frame Kit with Controller Board is a highly popular, budget-friendly DIY drone platform designed for hobbyists, aerial photography, and multi-rotor flight experimentation. With a 550mm wheelbase, its 6-axis layout provides enhanced flight stability, heavier payload capacity, and motor redundancy compared to standard quadcopters.
Key Technical Specifications
- Wheelbase: 550 mm
- Frame Weight: Approximately 420g to 640g (depending on the landing gear and expansion brackets used).
- Arm Material: Ultra-strength composite material made of Nylon and Glass Fiber, providing high impact resistance during rough landings.
- Center Board: Features an integrated PCB (Printed Circuit Board) that functions as a built-in power distribution board, allowing you to solder electronic speed controllers (ESCs) and battery leads safely and cleanly directly to the chassis.
Controller Board Compatibility
While basic packages traditionally bundle legacy entry-level controllers like the KKmulticopter 2012 (with 2.3 firmware) or standard 50mm boards (like MK, KK, FF, MWC), the frame is fully optimized for modern, advanced open-source flight controllers. Developers and advanced pilots frequently upgrade these kits using:
- Pixhawk 2.4.8 / Pixhawk 4 (For autonomous waypoint missions and robust sensor telemetry).
- APM (Ardupilot Mega) (For dependable, open-source autopilot configurations).
Recommended Power & Drive Train (Not included)
To get the F550 airframe airborne, a typical setup requires:
- Motors: 6 × 2212 920KV brushless motors.
- ESCs: 6 × 30A Electronic Speed Controllers with built-in BEC.
- Propellers: 3 pairs of 9443 or 1045 CW/CCW props.
- Battery: 3S to 4S LiPo battery (approx. 3300mAh to 5000mAh).
Package Includes:
6 * Wings
1 * Upper Cover Plate
1 * Lower Cover Plate
36 * Screws
1 * Upper Cover Plate
1 * Lower Cover Plate
36 * Screws
Note:
The motors, propellers, esc, controller etc, are not included in the package.
- Model: Flame Wheel 550 (F550)
- Frame Weight: 478g
- Diagonal Wheelbase: 550mm
- Takeoff Weight: 1200g ~ 2400g
- Recommended Propeller: 10 × 4.5in ; 8 × 4.5in
- Recommended Battery: 3S~4S LiPo
- Recommended Motor: 2212mm (Stator size)
- Recommended ESC: 30A OPTO or 18A
- Color: Red/White/Black
- Made by advanced engineering material,super strong & smooth Kit(need you assemble yourself)
- It will make a very stable platform for fun flying , Fpv and AP
Based on 0 reviews
Be the first to review “F550 Hexacopter MultiCopter Frame Kit with Controller Board”
You must be logged in to post a review.
Related products
- Motor and Gears, Robotics & Machines
3V-6V DC 12x20mm 1220 Miniature Vibration Motor Micro Vibrator
The brand new 1220 micro motor has a brass vibration head. The applicable voltage is DC3V-DC6V. The vibration power is good. The motors are all affixed with noise-reducing sponges and original plastic disks. The brush and commutator are of very good quality.
SKU: 0688
There are no reviews yet.