Audio & Visual, LCD & Display
Raspberry Pi 3.2 inch Touch Screen TFT LCD Display 320×240
This is a small TFT display designed for Raspberry Pi, it integrates a 3.2 inch with 320×240 16 bit color pixels display and a resistive touch. It is suitable for the Raspberry Pi B+/2B/3B. You can use it to display video play or create smart home monitoring, with your Pi easily now.
Availability:
In stock
₨ 3,700
In stock
Features
- 320×240 hardware resolution
- Resistive touch control
- Supports any revision of Raspberry Pi (directly-pluggable)
- 125MHz High-Speed SPI signal transmission, clear & stable display effect
- Drivers provided (works with your own Raspbian/Ubuntu/Kali/Retropie)
- Supports FBCP software driver as well, allows to config software resolution and set up dual-display
- Size perfectly fits the Pi (Raspberry Pi B+/2B/3B/3B+)
- High quality immersion gold surface plating
- Combined with the Raspberry Pi (refresh rate up to 50Hz), allows you to:
- Watch videos (multi formats like MP4)
- Play video games (RetroPie, take a bite)
- Take photos by touching (up to 17 camera modes)
- Use software keyboard (system interaction without keyboard/mouse)
Interface
| PIN NO. | SYMBOL | DESCRIPTION |
|---|---|---|
| 1, 17 | 3.3V | Power positive (3.3V power input) |
| 2, 4 | 5V | Power positive (5V power input) |
| 3, 5, 7, 8, 10, 12, 13, 15, 16 | NC | NC |
| 6, 9, 14, 20, 25 | GND | Ground |
| 11 | TP_IRQ | Touch Panel interrupt, low level while the Touch Panel detects touching |
| 18 | LCD_RS | Instruction/Data Register selection |
| 19 | LCD_SI / TP_SI | SPI data input of LCD/Touch Panel |
| 21 | TP_SO | SPI data output of Touch Panel |
| 22 | RST | Reset |
| 23 | LCD_SCK / TP_SCK | SPI clock of LCD/Touch Panel |
| 24 | LCD_CS | LCD chip selection, low active |
| 26 | TP_CS | Touch Panel chip selection, low active |
External Dimension
- Backlight: LED
- LCD Type: TFT
- Aspect Ratio: 8:5
- LCD Interface: SPI
- Resolution: 320*480 Pixels
- Touch Screen Type: Resistive
- Touch Screen Controller: XPT2046
- Colors: 65536
- Power Consumption: TBD
- Backlight Current: TBD
- Operating Temp. (℃): TBD
Based on 0 reviews
Be the first to review “Raspberry Pi 3.2 inch Touch Screen TFT LCD Display 320×240”
You must be logged in to post a review.
Related products
-
Audio & Visual, Audio & Sound
Piezo Buzzer 95db High-decibel 3-24V Electronic Buzzer Beep Alarm Intermittent Continuous Beep
Audio & Visual, Audio & SoundPiezo Buzzer 95db High-decibel 3-24V Electronic Buzzer Beep Alarm Intermittent Continuous Beep
- Color: Black
- Alarm Diameter:22mm/0.86″
- Alarm Height:10mm/0.39”
- 2 Mounting Holes distance:30mm/1.18″
- 2 Wires length:90mm/3.54″
- Buzzer Type: Piezoelectric
- Sound Pressure Level 95 dB
- Rate Voltage: 12V DC
- Operating Voltage: 3 – 24V
- Max Current Rating 10mA
- Frequency 3900±500Hz
- Drive Method: Drive Circuit Built in Mounting Holes
SKU: 0685 -
Audio & Visual, LCD & Display
7 Segment BCD Display 0.5″ Common Cathode
- Available in two modes Common Cathode (CC) and Common Anode (CA)
- Available in many different sizes like 9.14mm,14.20mm,20.40mm,38.10mm,57.0mm and 100mm (Commonly used/available size is 14.20mm)
- Available colours: White, Blue, Red, Yellow and Green (Res is commonly used)
- Low current operation
- Better, brighter and larger display than conventional LCD displays.
- Current consumption : 30mA / segment
- Peak current : 70mA
SKU: 0471 -
Audio & Visual, LCD & Display
2.4 Inch ILI9341 Touchscreen TFT LCD Display Screen Shield Module For Arduino UNO R3 Board
-20%
Audio & Visual, LCD & Display2.4 Inch ILI9341 Touchscreen TFT LCD Display Screen Shield Module For Arduino UNO R3 Board
- Color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor).
- Composed of a color TFT-LCD panel, driver IC, FPC and a back light unit. The module display area contains 320 x 240 pixels.
- The screen uses analog pins A0-A4 for LCD control and touch screen operations, which are in the same position on the UNO and the Mega, so the touch screen should work without any modification.
- The shield comes equipped with a micro SD card reader for easy access to use a software-based SPI library.
- Compatible with Arduino UNO R3 Mega2560 DUE.
SKU: 0177 -
-
Audio & Visual, LCD & Display, Modules and Breakout Boards, Compatibles for Arduino, Arduino Shield
1602 16×2 LCD Keypad Shield For Arduino
Audio & Visual, LCD & Display, Modules and Breakout Boards, Compatibles for Arduino, Arduino Shield1602 16×2 LCD Keypad Shield For Arduino
This is a very popular 16×2 LCD Keypad shield for Arduino or Freeduino board. It includes a 2×16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD. Analog Pin 0 is used to read the push buttons.
SKU: 0805
There are no reviews yet.