Modules and Breakout Boards
Showing 193–240 of 359 resultsSorted by latest
- Modules and Breakout Boards, Proximity/Distance Sensors, Sensors & Transducers
PR12-4DN M12 NPN Inductive Proximity Sensor with 4mm Sensing Distance Cylinder Inductive Switch
Modules and Breakout Boards, Proximity/Distance Sensors, Sensors & TransducersPR12-4DN M12 NPN Inductive Proximity Sensor with 4mm Sensing Distance Cylinder Inductive Switch
PR12-4DN M08 NPN Inductive Proximity Sensor with 2mm Sensing Distance Cylinder Inductive Switch is an Anti Vibration, Dust, Water, Oil Prevention, Reverse Power Protection, Short Circuit Protection, Directly Connecting with PLC can Replace Small & Limit Switches.
SKU: 0961 - Breakout Boards, Modules and Breakout Boards, Robotics & Machines, Stepper Motors & Drivers
1.5A H-bridge Dual Channel DC Motor Driver Module L298N PWM Speed Control
Breakout Boards, Modules and Breakout Boards, Robotics & Machines, Stepper Motors & Drivers1.5A H-bridge Dual Channel DC Motor Driver Module L298N PWM Speed Control
1.5A H-bridge Dual Channel DC Motor Driver Module L298N PWM Speed Control. Use of imported original chip, built-in low on-resistance MOS switch, minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered.
SKU: 0953 - Audio & Sound, Audio & Visual, Modules and Breakout Boards
ISD1820 Voice Recording & Playback Module Sound Sensor with Microphone and 8 Ohm Speaker
Audio & Sound, Audio & Visual, Modules and Breakout BoardsISD1820 Voice Recording & Playback Module Sound Sensor with Microphone and 8 Ohm Speaker
Buy online ISD1820 Voice Recording Module Sound Sensor with Microphone in Pakistan. Easy to use 10 second voice recording and playback. High quality, natural voice restore.
SKU: 0960 - Planes And Copters, Robotics & Machines, Wireless Communication
TS5828 Micro 5.8G 600mW 40CH FPV Transmitter with Digital Display and FPV 1500TVL /1200TVL Camera Receiver UVC for FPV Drone
Planes And Copters, Robotics & Machines, Wireless CommunicationTS5828 Micro 5.8G 600mW 40CH FPV Transmitter with Digital Display and FPV 1500TVL /1200TVL Camera Receiver UVC for FPV Drone
Buy TS5828 5.8G Micro 40-CH FPV Video Transmitter AV in Pakistan. This is the newest version, add auto sweep and match frequency, graphical interface, snow screen 0.1s delay.
SKU: 0894 - Modules and Breakout Boards, Wireless Communication
SIM900A BOARD 1800/1900 MHZ GSM GPRS MODULE (Non-PTA Approved)
Modules and Breakout Boards, Wireless CommunicationSIM900A BOARD 1800/1900 MHZ GSM GPRS MODULE (Non-PTA Approved)
SIM900A is an ultra-compact and reliable wireless module. It is a Dual-band GSM/GPRS module in a SMT type and is great for wireless cost-effective solutions.
Featuring an industry-standard interface, the SIM900A delivers GSM/GPRS 900/1800MHz performance for voice, SMS, and GPRS in a small form factor and with low power consumption. With a tiny configuration of 24mm x 24mm x 3 mm, SIM900A can fit almost all the space requirements in your applications, especially for slim and compact demand of design.
SKU: 0891 - Compatibles for Arduino, Mainboards, Modules and Breakout Boards
Arduino MEGA 2560 PRO Mini Compatible With ATMEGA2560-16AU And CH340G
Compatibles for Arduino, Mainboards, Modules and Breakout BoardsArduino MEGA 2560 PRO Mini Compatible With ATMEGA2560-16AU And CH340G
This board is the compact microcontroller fully compatible to the ever-popular Arduino Mega 2560.
It features a genuine Atmel ATmega2560 running at 16Mhz and leverages a CH340G for UART/USB interface to a micro USB.
Equipped with 54 (fifty-four) Digital I/O and 16 (sixteen) Analogue I/O it provides plenty of interfacing options.
SKU: 1122 - General Sensors, Modules and Breakout Boards, Sensors & Transducers
5Kg Scale Bar Load Cell Weight Sensor
General Sensors, Modules and Breakout Boards, Sensors & Transducers5Kg Scale Bar Load Cell Weight Sensor
This straight bar load cell (sometimes called a strain gauge) can translate up to 5kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.
SKU: 0947 - General Sensors, Modules and Breakout Boards, Sensors & Transducers
20Kg Scale Bar Load Cell Weight Sensor
General Sensors, Modules and Breakout Boards, Sensors & Transducers20Kg Scale Bar Load Cell Weight Sensor
This straight bar load cell (sometimes called a strain gauge) can translate up to 20kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.
SKU: 0949 - Converters, Modules and Breakout Boards
PCF8591 ADC & DAC Analog to Digital and Digital to Analog Converter Module
-19%
Converters, Modules and Breakout BoardsPCF8591 ADC & DAC Analog to Digital and Digital to Analog Converter Module
The PCF8591 is a monolithically integrated, and a separate power supply, low-power, 8-bit CMOS data acquisition devices. The PCF8591 has the four analog inputs, one analog output and a serial I2C bus interface. PCF8591 three address pins A0, A1 and A2 can be used in hardware address programmed 8 PCF8591 device allows access to the same I2C bus, without the need for additional hardware. On the PCF8591 device input and output of the address, control and data signals are transmitted in serial fashion via the two-wire bidirectional I2C bus.
SKU: 0764 - General Sensors, Modules and Breakout Boards, Sensors & Transducers
RCWL-0516 Doppler Radar Microwave Sensor Module Human Induction Detector Switch
General Sensors, Modules and Breakout Boards, Sensors & TransducersRCWL-0516 Doppler Radar Microwave Sensor Module Human Induction Detector Switch
This mini doppler radar sensor module is equipped with supporting DC 4-28V wide voltage This is a mini radar motion sensor module is equipped with RCWL-9196 chip based on the doppler microwave induction technology. It will automatically comtinuously output the high level TTL signel when there is motion. 360 degree no blind angle detection and maximum 7m sensoring distance with adjustable delay time and sensitivity. It is perfect for DIY microwave motion sensor light switch, human sensor toys, smart security devices, etc.
SKU: 0761 - General Electronic Boards, Modules and Breakout Boards
LM386 Audio Amplifier Module
The LM386 Audio Amplifier Module is a basic signal amplifier with 200X Gain, designed to accept incoming audio signals and boost them while maintaining the correct sound levels and ratios. It is a low-voltage Electronic Module with a small form factor that can read incoming signals from audio devices like radios, guitar pickups and microphones to amplify them for audio output devices like speakers, headphones or additional digital modules. It features an internal gain of 20x to keep the external parts count as low as possible, and an onboard potentiometer for manual on-the-fly volume adjustments.
SKU: 0763 - General Sensors, Modules and Breakout Boards, Sensors & Transducers
10Kg Scale Bar Load Cell Weight Sensor
General Sensors, Modules and Breakout Boards, Sensors & Transducers10Kg Scale Bar Load Cell Weight Sensor
This straight bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.
SKU: 0948 - General Electronic Boards, Modules and Breakout Boards
HX711 Pressure Sensor Load Cell Amplifier Module
General Electronic Boards, Modules and Breakout BoardsHX711 Pressure Sensor Load Cell Amplifier Module
The HX711 Dual-Channel 24 Bit Precision A/D weight Pressure Sensor Load Cell Amplifier and ADC Module is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight.
SKU: 0762 - Modules and Breakout Boards, Raspberry Pi Boards, Raspberry Pis
Raspberry Pi 4 model B 2GB Computer Development Board
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry PisRaspberry Pi 4 model B 2GB Computer Development Board
Raspberry Pi 4 has the ability to interact with the outside world & has been used in digital maker projects. Apart from that USB 3, dual HDMI, an upgraded CPU, camera and SD card slot and massive memory would provide much better performance to run applications.
SKU: 0747 - Modules and Breakout Boards, Raspberry Pi Boards, Raspberry Pis
Raspberry Pi 4 model B 4GB Computer Development Board
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry PisRaspberry Pi 4 model B 4GB Computer Development Board
Raspberry Pi 4 has the ability to interact with the outside world & has been used in digital maker projects. Buy Online Pi 4 with electrobes in Pakistan. Apart from that USB 3, dual HDMI, an upgraded CPU, camera and SD card slot and massive memory would provide much better performance to run applications.
SKU: 0748 - Light and Infrared Sensors, Modules and Breakout Boards, Sensors & Transducers
DC 12V Human Infrared Sensor Switch Light Sensor Infrared PIR Motion Sensor Switch 180 Degree
-10%
Light and Infrared Sensors, Modules and Breakout Boards, Sensors & TransducersDC 12V Human Infrared Sensor Switch Light Sensor Infrared PIR Motion Sensor Switch 180 Degree
This is a 12V human infrared sensors, pyroelectric infrared technology, the use of industrial district-level chip, intelligent control, set energy saving, convenient and environmentally friendly one, very convenient. This module also comes in 220V AC variant.SKU: 0766 - Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & Power
ACS712 30A 30 Amp Current Sensor Module
Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & PowerACS712 30A 30 Amp Current Sensor Module
The ACS712 Module uses the famous ACS712 IC to measure current using the Hall Effect principle. The module gets its name from the IC (ACS712) used in the module, so for you final products use the IC directly instead of the module.
SKU: 0757 - Modules and Breakout Boards, Sensors & Transducers
ACS712 20A 20 Amp Current Sensor Module
The ACS712 Module uses the famous ACS712 IC to measure current using the Hall Effect principle. The module gets its name from the IC (ACS712) used in the module, so for you final products use the IC directly instead of the module.
SKU: 0756 - General Sensors, Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & Power
ACS712 5A 5 Amp Current Sensor Module
General Sensors, Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & PowerACS712 5A 5 Amp Current Sensor Module
The ACS712 Module uses the famous ACS712 IC to measure current using the Hall Effect principle. The module gets its name from the IC (ACS712) used in the module, so for you final products use the IC directly instead of the module.
SKU: 0755 - Modules and Breakout Boards, Sensors & Transducers
Water Level Sensor Liquid Depth Measuring Module for Arduino
Modules and Breakout Boards, Sensors & TransducersWater Level Sensor Liquid Depth Measuring Module for Arduino
A water sensor is a device used in the detection of the water level for various applications. Water sensors can come in several variations that include ultrasonic sensors, pressure transducers, bubblers, and float sensors.
SKU: 0754 - Modules and Breakout Boards, Robotics & Machines, Stepper Motors & Drivers
L298N H-Bridge Motor Driver Module
Modules and Breakout Boards, Robotics & Machines, Stepper Motors & DriversL298N H-Bridge Motor Driver Module
The L298 motor driver module features:
- Finned Aluminum Heatsink for the L298 IC
- Clamping Rectifiers
- Filter Capacitors for logic-power and moto-power busses
- Onboard 5-Volt DC Regulator (A jumper selects between external 5-Volt power or the onboard 5-volt regulator.)
- Screw Terminal connections for ground, motor power, 5-volt power, and motor outputs
- 0.1 inch-pitch header pins for logic inputs
- Jumpers to tie the enable inputs to ground (if desired)
- Switches up to 2 amps per channel
SKU: 0753 - Modules and Breakout Boards
CH340 USB to TTL (Serial) HW 597 Converter Module
A simple USB to serial converter with selectable voltage through a jumper. Specifications:
- 3.3V-5V TTL voltages
- Converts TTL logic levels to computer RS232 levels
- Power supplies: 5V, 3.3V, GND (min)
- RX (3.3V-5V)
- TX (3.3V-5V)
SKU: 0751 - Converters, Modules and Breakout Boards
CP2102 USB 2.0 to TTL UART 6PIN Serial Converter
CP2102 chip from SiLabs is a single chip USB to UART bridge IC. It requires minimal external components. CP2102 can be used to migrate legacy serial port based devices to USB. Hobbyists can use it as a powerful tool to make all kinds of PC interfaced projects. This module help all those who are comfortable with RS232/Serial Communication protocol, to build USB devices very easily.
SKU: 0617 - Modules and Breakout Boards
HC SR505 PIR Motion Sensor Module
HC-SR505 is mini PIR (Passive Infra Red) motion sensor module, which as the name implies used for detecting the motion of a body in front of it. The device works based on infrared technology and it can automatic control by itself with high sensitivity and high reliability. Because of the minimum size and low-power operation mode, it widely used in battery-powered applications.
SKU: 0749 - Audio & Visual, General Sensors, Modules and Breakout Boards, Sensors & Transducers
R307 Optical Fingerprint Scanner Module for Arduino
Audio & Visual, General Sensors, Modules and Breakout Boards, Sensors & TransducersR307 Optical Fingerprint Scanner Module for Arduino
- R307 is an optical fingerprint module integrates a fingerprint algorithm chip with functions such as fingerprint entry, image processing, feature extraction, template generation, template storage, fingerprint comparison (1: 1) and fingerprint search (1: N).
- The fingerprint reader can perform secondary development and be embedded in various end products, e.g. For example: access control, presence, safe, car door locks.
- Low power consumption, low cost, small size, excellent performance.
- Professional optical technology, precise module manufacturing technology.
SKU: 0737 - Converters, Modules and Breakout Boards
LM2596 Tripple / Three Variables Buck Adjustable Step Down Power Supply Module DC-DC Converter
Converters, Modules and Breakout BoardsLM2596 Tripple / Three Variables Buck Adjustable Step Down Power Supply Module DC-DC Converter
- Input voltage: 4-35V
- Output Voltage: 1.5-35V (adjustable)
- Output current: rated current 2A, maximum 3A (heat sink required)
- Conversion efficiency: Up to 92% (the higher the voltage, the higher the efficiency)
- Switching Frequency: 150KHz
- Rectifier: Non-Synchronous Rectification
- Module Properties: Non-isolated step-down module (buck)
- Short circuit protection: current limiting
- Operating temperature: Industrial grade (-40 ℃ to +85 ℃) (output power 10W or less)
- Full load temperature rise: 40 ℃
- Load regulation: ± 0.5%
- Voltage regulation: ± 0.5%
- Dynamic response speed: 5% 200uS
- Output ripple:
- Input 12V Output 5V 3A 60mV (MAX)
- Input 24V Output 12V 3A 120mV (MAX)
SKU: 0721 - Modules and Breakout Boards, Wireless Communication
RFID Tag Key 13.56Mhz Ring Tag Card
1. MIFARE Classic 1K Chip
2. 13.56MHZ
3. Blue color
4. ABS Material, waterproof.
5. With metal ring.
6.can work with RC522 and PN532
7.block 0 can’t change,UID Can’t change,please contact with us if you are not sure about your chip.
8.ISO14443A
MIFARE and MIFARE Classic are trademarks of NXP B.V.SKU: 0733 - Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
2S 3A 7.4V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards2S 3A 7.4V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
2S 3A Li-ion Lithium Battery 7.4V 8.4V 18650 Charger Protection Board Module is a small PCB mounted Li-ion Lithium Battery charger protection module.
SKU: 0731 - Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
3S 10A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards3S 10A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
3S 10A 11.1V-12.6V Cell 18650 Li-ion Lithium Ion Battery Balanced Charging BMS PCB Board with over-charge Protection for 18650, 26650 battery. Buy in Pakistan
SKU: 1539 - Compatibles for Arduino, Mainboards, Modules and Breakout Boards
Arduino Nano V3 Pre-Soldered Pins with USB Cable
-13%
Compatibles for Arduino, Mainboards, Modules and Breakout BoardsArduino Nano V3 Pre-Soldered Pins with USB Cable
The Arduino Nano v3 available at electrobes in pakistan is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.0). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.
SKU: 0101 - Arduino Tools & Kits, Compatibles for Arduino, Modules and Breakout Boards
Arduino UNO Rev3 USB 2.0 Cable Type A/B
Arduino Tools & Kits, Compatibles for Arduino, Modules and Breakout BoardsArduino UNO Rev3 USB 2.0 Cable Type A/B
- USB Type: Type-A to Type-B
- Weight: 25 gm.
- Length: 30 cm.
- Fully compatible with the PC.
- Aluminum under-mold shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference
SKU: 0722 - Compatibles for Arduino, Mainboards, Modules and Breakout Boards
Arduino UNO R3 SMD Variant Improved Version
-32%
Compatibles for Arduino, Mainboards, Modules and Breakout BoardsArduino UNO R3 SMD Variant Improved Version
The Arduino Uno R3 Compatible Board is a microcontroller board which is based on the ATmega328. Arduino Uno has 14 digital input or output pins(where 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It has everything needed to support the microcontroller, you need to simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
SKU: 0119-1 - Modules and Breakout Boards, Voltage, Current & Power
12v 400ma 4w Ac-Dc Step Down Isolated Switching Power Supply Module
-10%
Modules and Breakout Boards, Voltage, Current & Power12v 400ma 4w Ac-Dc Step Down Isolated Switching Power Supply Module
- Working Temperature: -20 ~ 60℃
- Relative Humidity: 40 ~ 90%R
- Input Voltage Range: 85~ 265v
- Input Current:
- 0.0273A(AC110V)
- 0.014A(AC220V)
- Input Inrush Current: 20A
- Output Voltage Range: 11.80~12.1V 0~500mA
- Output Power: 0 ~6.0 W
- Output Efficiency: 80%
- Input Voltage Of AC: 85 ~ 265v 50/60 HZ
- Output Voltage DC: 12V (±0.1V)
- Output Current: 450MA
- Power: 5W
- Size: 3 x 2 x 1.8 cm
SKU: 0796
