board
Showing 1–48 of 85 resultsSorted by latest
- Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
4S 30A LifePo4 Lithium Iron Phosphate Battery Balanced Charging BMS PCB Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards4S 30A LifePo4 Lithium Iron Phosphate Battery Balanced Charging BMS PCB Board
4S 30A 12.6V Cell 18650 LifePo4 Lithium Iron Phosphate Battery Charging BMS PCB Board with Protection Charging Module battery management system available in Pakistan
SKU: 1843 - Batteries & Chargers, BMS (Battery Management System)
3S 100A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
Batteries & Chargers, BMS (Battery Management System)3S 100A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
3S 100A 12.6V Cell 18650 Li-ion Lithium Rechargeable Battery Charging 3 cell BMS Battery charge protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: 1785 - Compatibles for Arduino, Mainboards, Modules and Breakout Boards
Arduino UNO WiFi R3 ATmega328P + ESP8266 8Mb USB-TTL CH340G Development Board
Compatibles for Arduino, Mainboards, Modules and Breakout BoardsArduino UNO WiFi R3 ATmega328P + ESP8266 8Mb USB-TTL CH340G Development Board
The Arduino Uno Wi-Fi is the same as an Arduino Uno Rev3 but with an integrated Wi-Fi module! The board is based on the ATmega328P with an ESP8266 Wi-Fi Module integrated.
SKU: 1730 - Modules and Breakout Boards, Relay Boards
12V 2 Channel 10A Relay Module
- Operating Voltage: 12V DC
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- Mounting holes provided
SKU: 1725 - Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
24V 6S 40A 18650 Li-Ion Lithium Battery Protection Board Solar Lighting BMS PCB with Balance Charging for E-bike Scooter
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards24V 6S 40A 18650 Li-Ion Lithium Battery Protection Board Solar Lighting BMS PCB with Balance Charging for E-bike Scooter
BMS (Battery Management System) – a battery management system designed to monitor the status of batteries, control the process of charging/discharging the battery, etc.
Six batteries (18650) can be connected simultaneously to this charge-discharge controller module. The module has protection against short circuits, overcharge and over-discharge. One of the functions of the charge controller is to turn off the power supply for the batteries when the maximum capacity of at least one battery is reached. This BMS controller is designed for more than 30,000 hours of operation. The maximum allowable current is 40 A.
If the maximum permissible value of the supply voltage is exceeded, the charge controller activates the “protection” mode. In order to restore the module, it is necessary to re-apply voltage to the input of the BMS board or wait a while until the charge controller automatically disables protection.
SKU: 1722 - Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
3S 60A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS Board Balanced Charging Module
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards3S 60A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS Board Balanced Charging Module
3S 60A 12.6V Cell 18650 Li-ion Lithium Rechargeable Battery Charging 3 cell BMS Battery charge protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: 1717 - Breadboards, Protoboards & PCBs, Discrete Electronic Components
12×12 inch Clear Acrylic Sheet Cast Plexiglass Plastic Sheet
Breadboards, Protoboards & PCBs, Discrete Electronic Components12×12 inch Clear Acrylic Sheet Cast Plexiglass Plastic Sheet
12″ x 12″ Clear Acrylic Sheet Cast Plexiglass Plastic Sheet 0.08″ 2mm Thick, for Lamps, Construction, Handicrafts, Model Making and Hobby Use at best price online in Pakistan
SKU: 1548 - Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
3S 10A 12.6V Cell 18650 Li-ion Lithium Battery Balanced Charging BMS Board with Protection Charger Module
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards3S 10A 12.6V Cell 18650 Li-ion Lithium Battery Balanced Charging BMS Board with Protection Charger Module
3S 10A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
SKU: 0732 - Breakout Boards, Modules and Breakout Boards
W5500 SPI to Ethernet LAN Network Module
The Ethernet module for Arduino and compatible boards based on the Wiznet W5500 chip, faster than the previous W5100. It provides an easy way to connect your module to the local network and internet based WIZNET with a TCP/IP interface. Compatible with libraries with the same Ethernet API. A web server can be built with this shield. It can be used as a server or as a client.
SKU: 1538 - Breadboards, Protoboards & PCBs, Discrete Electronic Components
12 x 6 inch Double Sided Copper Clad FR4 Fiber Glass Printed Circuit Board PCB Sheet
Breadboards, Protoboards & PCBs, Discrete Electronic Components12 x 6 inch Double Sided Copper Clad FR4 Fiber Glass Printed Circuit Board PCB Sheet
12 x 4.5 inch Copper Clad FR4 Fiber Glass Printed Circuit Board PCB Board with Copper Thickness 2oz, Total PCB thickness 16mm & Tolerance 10% Single Sided. This board is Ink resistant. Suitable etchants Ferric Chloride or Fine Etch crystals. Buy online in Pakistan at Electrobes.
SKU: 0925-4 - Breadboards, Protoboards & PCBs, Discrete Electronic Components
12×12 inch Double Sided Copper Clad FR4 Fiber Glass Printed Circuit Board PCB Sheet
Breadboards, Protoboards & PCBs, Discrete Electronic Components12×12 inch Double Sided Copper Clad FR4 Fiber Glass Printed Circuit Board PCB Sheet
12″ x 12″ 1 sqft Copper Clad FR4 Fiber Glass Printed Circuit Board PCB Board with Copper Thickness 2oz, Total PCB thickness 16mm & Tolerance 10% Single Sided. This board is Ink resistant. Suitable etchants Ferric Chloride or Fine Etch crystals. Buy online in Pakistan at Electrobes.
SKU: 0924-1 - Breadboards, Protoboards & PCBs, Discrete Electronic Components
4.3 x 12 inch Copper Clad Single Sided Printed Circuit Board PCB Sheet
Breadboards, Protoboards & PCBs, Discrete Electronic Components4.3 x 12 inch Copper Clad Single Sided Printed Circuit Board PCB Sheet
4.3inch x 12inch Copper Clad Printed Circuit Board PCB. Copper Thickness: 35micron, Total PCB thickness: 10mm Tolerance: 10% Single Sided buy online in Pakistan at electorbes.
SKU: 0673-2 - Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
4S 20A 14.8V Cell 18650 Li-ion Lithium Battery Balanced Charging BMS PCB Board with Protection
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards4S 20A 14.8V Cell 18650 Li-ion Lithium Battery Balanced Charging BMS PCB Board with Protection
Battery Protection Board 4S 20A 14.8V BMS for 18650 Lithium Ion Cell HX-4S-A20. prevent it from being over-discharged / over-charged during use. Buy in Pakistan
SKU: 1615 - Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
3S 40A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS Board Balanced Charging Module
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards3S 40A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS Board Balanced Charging Module
3S 40A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection and Balanced Charging Module. Buy online in Pakistan.
SKU: 1480 - Compatibles for Arduino, Mainboards, Modules and Breakout Boards
Arduino UNO R3 Development Board
Arduino Uno is a microcontroller board based on 8-bit ATmega328P microcontroller. It consists a 16MHz crystal oscillator, serial communication, voltage regulator, etc. to support the microcontroller.
SKU: 0100-1 - Breadboards, Protoboards & PCBs, Discrete Electronic Components
A4 Size PCB Thermal Transfer Paper for Project PCB Making
Breadboards, Protoboards & PCBs, Discrete Electronic ComponentsA4 Size PCB Thermal Transfer Paper for Project PCB Making
The thermal transfer method is to make printed circuit boards. The printed circuit boards are printed on the thermal transfer paper by laser printer. Then the transfer paper is covered on the copper-coated board. After heating, the melted toner is completely absorbed on the copper-coated board.
SKU: 1337 - Accessories, Batteries & Chargers, Breakout Boards, Modules and Breakout Boards
HW-633 Lithium Battery Protection Module Board for 12-24V Storage Battery
Accessories, Batteries & Chargers, Breakout Boards, Modules and Breakout BoardsHW-633 Lithium Battery Protection Module Board for 12-24V Storage Battery
Battery application: Lead-acid batteries, Solar cells, new energy batteries, Car battery, electric car battery, Lithium-ion battery, polymer battery.
SKU: 1329 - Breadboards, Protoboards & PCBs, Discrete Electronic Components
12 x 4.5 inch Copper Clad FR4 Fiber Glass Printed Circuit Board PCB Sheet
Breadboards, Protoboards & PCBs, Discrete Electronic Components12 x 4.5 inch Copper Clad FR4 Fiber Glass Printed Circuit Board PCB Sheet
12 x 4.5 inch Copper Clad FR4 Fiber Glass Printed Circuit Board PCB Board with Copper Thickness 2oz, Total PCB thickness 16mm & Tolerance 10% Single Sided. This board is Ink resistant. Suitable etchants Ferric Chloride or Fine Etch crystals. Buy online in Pakistan at Electrobes.
SKU: 0925-3 - CNC & 3D Printers, CNC Machine Parts
MACH3 Engraving Machine CNC 5-Axis Stepper Motor Driver Board
CNC 5 Axis Stepper Motor Driver Interface Board With USB Cable Optocoupler Isolation For MACH3 Engraving Machine. fully support MACH3 and other computer software that supports parallel port control.
SKU: CNC-086 - 3D Printer Parts, CNC & 3D Printers
RAMPS 1.4 Reprap LCD 2004 Graphic Smart for 3D Printers
- Popular RepRap 3D Printer LCD Controller and SD Card Reader
- Included adapter for RAMPS 1.4 board
- Fully supported by Marlin firmware
- With Smart LCD Controller you can print 3D designs without USB connection to your computer
SKU: CNC-173 - 3D Printer Parts, CNC & 3D Printers
RAMPS 1.4 Reprap 12864 LCD Graphic Smart Controller Board for 3D Printers
3D Printer Parts, CNC & 3D PrintersRAMPS 1.4 Reprap 12864 LCD Graphic Smart Controller Board for 3D Printers
3D Printer Reprap Smart Controller 12864 LCD Display with Smart Controller Board for 3D Printer RAMPS 1.4 Reprap Mendel Prusa for Arduino 128×64 LCD Blue Color. We also have other related accessories for CNC and 3D printer machines in Pakistan.
SKU: CNC-172 - Compatibles for Arduino, Mainboards, Modules and Breakout Boards
Arduino MEGA 2560 PRO Mini Compatible With ATMEGA2560-16AU And CH340G
Compatibles for Arduino, Mainboards, Modules and Breakout BoardsArduino MEGA 2560 PRO Mini Compatible With ATMEGA2560-16AU And CH340G
This board is the compact microcontroller fully compatible to the ever-popular Arduino Mega 2560.
It features a genuine Atmel ATmega2560 running at 16Mhz and leverages a CH340G for UART/USB interface to a micro USB.
Equipped with 54 (fifty-four) Digital I/O and 16 (sixteen) Analogue I/O it provides plenty of interfacing options.
SKU: 1122 - Audio & Visual, LCD & Display
12864 128X64 KS0108 Dots Graphic LCD Display Module (Blue Color Backlight)
Audio & Visual, LCD & Display12864 128X64 KS0108 Dots Graphic LCD Display Module (Blue Color Backlight)
The 12864B Graphic LCD module is a 128×64 pixel LCD display with a blue backlight and white foreground. The display is fully programmable and can display a combination of both graphics and text. It can operate in both parallel and serial (SPI) modes which can be configured by the external pin PSB. In SPI mode only 3 data pins are required to drive this display.
SKU: 0957 - Audio & Visual, LCD & Display
8×2 LCD Display 0802 Character Display – Yellow Green
WH0802A1 is an 8 character by 2 lines 8×2 character LCD display. This 8×2 LCD module is available in various LCD panel colors including gray, yellow/green and blue LCD options. 0802 LCD module is built in with ST7066 controller (or equivalent). WH0802A1 model has different interfaces available, it’s default 6800 4/8-bit parallel 6800 interface, also it’s optional SPI and I2C by using RW1063 IC.
SKU: 0956 - General Electronic Boards, Modules and Breakout Boards
LM386 Audio Amplifier Module
The LM386 Audio Amplifier Module is a basic signal amplifier with 200X Gain, designed to accept incoming audio signals and boost them while maintaining the correct sound levels and ratios. It is a low-voltage Electronic Module with a small form factor that can read incoming signals from audio devices like radios, guitar pickups and microphones to amplify them for audio output devices like speakers, headphones or additional digital modules. It features an internal gain of 20x to keep the external parts count as low as possible, and an onboard potentiometer for manual on-the-fly volume adjustments.
SKU: 0763 - Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & Power
ACS712 30A 30 Amp Current Sensor Module
Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & PowerACS712 30A 30 Amp Current Sensor Module
The ACS712 Module uses the famous ACS712 IC to measure current using the Hall Effect principle. The module gets its name from the IC (ACS712) used in the module, so for you final products use the IC directly instead of the module.
SKU: 0757 - Modules and Breakout Boards, Sensors & Transducers
ACS712 20A 20 Amp Current Sensor Module
The ACS712 Module uses the famous ACS712 IC to measure current using the Hall Effect principle. The module gets its name from the IC (ACS712) used in the module, so for you final products use the IC directly instead of the module.
SKU: 0756 - General Sensors, Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & Power
ACS712 5A 5 Amp Current Sensor Module
General Sensors, Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & PowerACS712 5A 5 Amp Current Sensor Module
The ACS712 Module uses the famous ACS712 IC to measure current using the Hall Effect principle. The module gets its name from the IC (ACS712) used in the module, so for you final products use the IC directly instead of the module.
SKU: 0755 - Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
2S 3A 7.4V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards2S 3A 7.4V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
2S 3A Li-ion Lithium Battery 7.4V 8.4V 18650 Charger Protection Board Module is a small PCB mounted Li-ion Lithium Battery charger protection module.
SKU: 0731
