IOT Development Board, Modules and Breakout Boards
ESP32 S3 Development Board WiFi + Bluetooth MCU Module
ESP32-S3-DevKitC-1-N16R8 ESP32 S3 Development Board WiFi + Bluetooth MCU Module, Dual Type-C ESP32-S3-WROOM-1 Cores Microcontroller Processor Integrates Complete Wi-Fi and BLE Functions
Availability:
In stock
₨ 1,600
In stock
ESP32-S3-DevKitC-1-N16R8 ESP32 S3 Development Board WiFi + Bluetooth MCU Module
Features:
- WiFi + Bluetooth 5 (LE): ESP32-S3 integrates 2.4 GHz WiFi (802.11 b/g/n) and supports a bandwidth of 40 MHz; its Bluetooth Low Energy subsystem supports Bluetooth 5 (LE) and Bluetooth Mesh.
- Extensive IO interfaces: ESP32-S3 has 45 programmable GPIOs and common peripheral interfaces such as SPI, I2S, I2C, PWM, RMT, ADC, UART, SD/MMC host controller and TWAITM controller.
- Powerful performance: Xtensa 32-bit LX7 dual-core processor with up to 240 MHz. Built-in 512KB SRAM, 384KB ROM storage space and supports multiple external SPI, Dual SPI, Quad SPI, Octal SPI, QPI, OPI flash and off-chip RAM.
- ESP32 S3 MCU WIFI also supports infrastructure network station mode (Infrastructure BSS), SoftAP mode and Station + SoftAP hybrid mode
- ESP32-S3 is equipped with an ultra-low-power coprocessor (ULP), supports multiple low-power modes, and is widely suitable for various low-power application scenarios.
- Dual-core Xtensa LX7 CPU, up to 240 MHz, and supporting single-precision FPU
- Added instructions to accelerate machine learning applications
- 512 KiB SRAM, 384 KiB ROM, and 16 KiB RTC SRAM
- Capable of connecting to external PSRAM and Flash via Quad SPI or Octal SPI, and share the same 32 MiB address space
- Ultra-low power RISC-V (RV32IMC) coprocessor clocked at 17.5 MHz approximately
- Ultra-low power FSM coprocessor similar to previous ESP32 and ESP32-S2
- Wi-Fi 2.4 GHz (IEEE 802.11 b/g/n)
- Bluetooth 5 (LE)
- 45 programmable GPIOs
- No integrated ethernet MAC
- 2 × 12-bit SAR ADCs, up to 20 channels
- USB OTG
Related products
-
Modules and Breakout Boards, Sensors & Transducers, Gas Sensors
MQ-4 Methane/ Natural Gas Sensor Module for Arduino
Modules and Breakout Boards, Sensors & Transducers, Gas SensorsMQ-4 Methane/ Natural Gas Sensor Module for Arduino
- Good sensitivity to Combustible gas in wide range
- High sensitivity to CH4, Natural gas.
- Small sensitivity to alcohol, smoke.
- Fast response Stable and long life
- Simple drive circuit
SKU: 0128 -
-
Modules and Breakout Boards, Compatibles for Arduino, Mainboards
ARDUINO Leonardo ATmega32u4 BOARD
Arduino Leonardo Development Board is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins, a 16 MHz crystal oscillator, a micro USB connection. Buy online in Pakistan at Electrobes.
SKU: 0105 -
Modules and Breakout Boards, Compatibles for Arduino, Arduino Shield
W5100 Ethernet Network Shield W5100 Ethernet Expansion Board with SD Card Slot for Arduino UNO MEGA2560
Modules and Breakout Boards, Compatibles for Arduino, Arduino ShieldW5100 Ethernet Network Shield W5100 Ethernet Expansion Board with SD Card Slot for Arduino UNO MEGA2560
W5100 Ethernet Shield for Arduino connects your Arduino to the internet in mere minutes based on the Wiznet W5100 ethernet chip. Buy online in Pakistan.
SKU: 0111
