serial
Showing all 9 results
- Modules and Breakout Boards
CH340 USB to TTL (Serial) HW 597 Converter Module
A simple USB to serial converter with selectable voltage through a jumper. Specifications:
- 3.3V-5V TTL voltages
- Converts TTL logic levels to computer RS232 levels
- Power supplies: 5V, 3.3V, GND (min)
- RX (3.3V-5V)
- TX (3.3V-5V)
SKU: 0751 - Converters, Modules and Breakout Boards
CP2102 USB 2.0 to TTL UART 6PIN Serial Converter
CP2102 chip from SiLabs is a single chip USB to UART bridge IC. It requires minimal external components. CP2102 can be used to migrate legacy serial port based devices to USB. Hobbyists can use it as a powerful tool to make all kinds of PC interfaced projects. This module help all those who are comfortable with RS232/Serial Communication protocol, to build USB devices very easily.
SKU: 0617 - Discrete Electronic Components, General ICs, ICs
74LS95 4-BIT SHIFT REGISTER / PARALLEL IN AND SERIAL OUT
Discrete Electronic Components, General ICs, ICs74LS95 4-BIT SHIFT REGISTER / PARALLEL IN AND SERIAL OUT
- Product Category: Counter Shift Registers
- Counting Sequence: Serial/Parallel to Parallel
- Number of Circuits: 1
- Number of Bits: 4 bit
- Package/Case: PDIP-14
- Logic Family: LS
- Logic Type: Bipolar
- Number of Input Lines: 5
- Propagation Delay Time: 32 ns
- Supply Voltage – Max: 5.25 V
- Minimum Operating Temperature: 0 °C
- Maximum Operating Temperature: + 70 °C
- Function: Shift Register
- Series: SN74LS95B
- Mounting Style: DIP
- Number of Output Lines: 4
- Product Type: Counter Shift Registers
- Subcategory: Logic ICs
- Unit Weight: 1 g
SKU: 0564 - Discrete Electronic Components, Encoder & Decoder ICs, ICs
74HC164 8bit Serial-In / Parallel-Out Shift Register
Discrete Electronic Components, Encoder & Decoder ICs, ICs74HC164 8bit Serial-In / Parallel-Out Shift Register
- 8-bit Gated Serial Inputs with Asynchronous Clear
- Clocking Occurs on the Low-to-High Transition of the Clock Input
- Data at the Serial Inputs can be Changed on High or Low State of the Clock
- Standard TTL Switching Voltages
- Superseded, Not Recommended for New Designs
- Typical operating frequency: 50 MHz
- Typical propagation delay: 19 ns (clock to Q)
- Wide operating supply voltage range: 2V to 6V
- Low input current: 1 µA maximum
- Low quiescent supply current: 80 µA maximum
- Fanout of 10 LS-TTL loads
- Package type: DIP
- No. of pins: 14
SKU: 0565
