Audio & Visual, LCD & Display Compare
4.3 Inch HMI LCD Module DMG48270C043_04WTC (Commercial Grade)
The 4.3 inch HMI LCD Touch Display is a Seamless Human Machine Interface (HMI) display module solution that provides a control and visualization interface for any Raspberry Pi and Arduino kits.
Availability:
In stock
₨ 7,500
In stock
DWIN 4.3 Inch HMI LCD Module DMG48270C043_04WTC (Commercial Grade)
Features:
- Based on self-designed T5L0, 262K Color, 18bit, 480*272, TV-TN-TFT-LCD;
- Capacitive touch screen Optional;
- TTL/RS232 Interface,10Pin1.0mm FCC connection wire;
- Download via SD card or on-line serial port;
- Easy-to-use DWIN DGUS V7.6 GUIs Development, no coding skills required;
- Dual Development System: DGUS II/ TA(Instruction set);
Package Includes:
1 x 4.3 inch HMI display screen
| LCM interface | FPC40_0.5mm, RGB interface |
| TP interface | Capacitive touch: COB structure, IIC interface |
| Resistive touch: 4Pin_1.0mm interface | |
| User interface | 10Pin_1.0mm latching socket for power supply and serial communication. Download rate(typical value): 12KByte/s |
| Flash | 16 MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times |
| Buzzer | 3V passive buzzer. Power: <1W |
| SD card interface | FAT32. Download files by SD interface can be displayed in statistics. Download rate: 4Mb/s |
| PGT05 interface | When product crashes by accident, you can use PGT05 to update DGUS kernel and make the product return to normal |
| LCD Type | TV-TN, TFT LCD |
| Viewing Angle | TV viewing angle, 70°/70°/40°/30° (L/R/U/D) |
| Resolution | 480×272 pixels (0°/90°/180°/270°) |
| Color | 18-bit 6R6G6B |
| Active Area (A.A.) | 95.04mm (W)×53.86mm (H) |
| Backlight Mode | LED |
| Backlight Service Life | >20000 hours (Time of the brightness decaying to 50%on the condition of continuous working with the maximum brightness) |
| Brightness | DMG48270C043_04WTC: 250nit |
| DMG48270C043_04WTR: 200nit | |
| DMG48270C043_04WN: 300nit | |
| Brightness Control | 0~100 grade (When the brightness is adjusted to 1%~30%of the maximum brightness, flickering may occur and is not recommended to use in this range) |
| Note: You can use dynamic screen saver wallpapers to avoid afterimages caused by fixed page display for a long time. | |
| Type | CTP (Capacitive touch panel) |
| Structure | G+G structure with surface cover of tempered glass |
| Touch Mode | Support point touch and drag |
| Surface Hardness | 6H |
| Light Transmittance | Over 90% |
| Life | Over 1,000,000 times touch |
| Type | RTP (Resistive touch panel) |
| Structure | ITO film + ITO glass |
| Touch Mode | Support point touch and drag |
| Surface Hardness | 3H |
| Light Transmittance | Over 80% |
| Life | Over 1,000,000 times touch |
| Mode | UART2: ON=TTL/CMOS; OFF=RS232 UART4: ON=TTL/CMOS; OFF=RS232(Only available after OS configuration) | |||||
| Voltage Level | Test Condition | Min | Typ | Max | Unit | |
| Output 1, Iout = -4mA | 2.7 | 3.2 | – | V | ||
| Output 0, Iout = 4mA | – | 0.1 | 0.4 | V | ||
| Input 1 | 2.4 | 3.3 | 5.5 | V | ||
| Input 0 | 0 | – | 1.0 | V | ||
| Baud Rate | 3150~3225600bps, typical value of 115200bps | |||||
| Data Format | UART2: N81 UART4: N81/E81/O81/N82 , 4 modes (OS configuration) | |||||
| Interface Cable | 10Pin_1.0mm | |||||
| Rated Power | <5W | |||||
| Operating Voltage | 4.5~5.5V, typical value of 5V | |||||
| Operating Current | 200mA | VCC=5V, max backlight | ||||
| 70mA | VCC=5V, backlight off | |||||
| Recommended power supply: 5V 1A DC | ||||||
| Operating Temperature | -10℃~60℃ (5V @ 60% RH) | |||||
| Storage Temperature | -20℃~70℃ | |||||
| Conformal Coating | None | |||||
| Operating Humidity | 10%~90%RH, typical value of 60% RH | |||||
Related products
- Audio & Visual, LCD & Display
2.4 Inch ILI9341 Touchscreen TFT LCD Display Screen Shield Module For Arduino UNO R3 Board
Audio & Visual, LCD & Display2.4 Inch ILI9341 Touchscreen TFT LCD Display Screen Shield Module For Arduino UNO R3 Board
- Color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor).
- Composed of a color TFT-LCD panel, driver IC, FPC and a back light unit. The module display area contains 320 x 240 pixels.
- The screen uses analog pins A0-A4 for LCD control and touch screen operations, which are in the same position on the UNO and the Mega, so the touch screen should work without any modification.
- The shield comes equipped with a micro SD card reader for easy access to use a software-based SPI library.
- Compatible with Arduino UNO R3 Mega2560 DUE.
SKU: 0177 - Audio & Visual, Computer Interface
Samsung EVO Plus 32GB MicroSDHC Memory Card Class 10
This 32GB microSDHC Memory Card Class 10 from Samsung is ideal for use with multimedia mobile phones or any other device that uses microSDHC cards. Expand your entertainment storage with up to 32GB of extra music, videos, photos, games, software, and comes with 6 months warranty to relax your mind. It can be used with Raspberry Pi and Arduino SD card module available online in Pakistan at electrobes.
SKU: SD-002
