LJ12A3-4-Z/BY PNP NO Inductive Proximity Sensor Switch DC 6V-36V
- Model: LJ12A3-4-Z BY
- Distance Detection Capability: 4mm
- Operating Voltage: DC 6V – 36V
- Output Type: Digital PNP
- SEO Technology: Switching Enhanced Operation
- Protection Rating: IP67 (Resistance to dust and water)
- Operating Temperature Range: -25°C to +70°C
- Cable Length: Typically 2 meters, or can be optionally specified
- Protections: Short circuit, overcurrent, and reverse polarity protections
- Mounting: M12 connector or cable connection options
- Indicator Light: LED indicator showing detection status
- Material: Options of metal or plastic body
In stock
₨ 600
In stock
LJ12A3-4-Z/BY PNP Inductive Proximity Sensor Switch DC 6V-36V NO 3-Wire 4mm
The LJ12A3-4-Z/BY is a 3-wire inductive proximity sensor designed for non-contact metal detection. It features an PNP transistor output with Normally Open (NO) logic, meaning the signal wire stays “Open” (High Impedance) until a metal object is detected within its 4mm range, at which point it pulls the signal to Ground (Sink).
Description:
- Power supply reversal connection protection; short-circuit protection can directly connect with PLC
- Used in common places with Medium environment resistance
- Red LED indicates that it’s available to detect the sensor operation state
- Economical and simple operation
- Widely used, it can be a substitution for min-type switch and limit switch
- IP 67 Water protection
Features:
- Theory: Inductive Sensor.
- High Repeated Positioning Accuracy.
- Wire type and power: DC 3-wire type 6-36VDC
- Sensing side diameter : M12
- Sensing distance: 4mm
- Installation: Non-Shield(non-flush)
- Control output: PNP Normally Open
Specifications:
- Types: LJ12A3-4-Z/BY
- Mounting Hole Diameter: 12 mm
- Detecting Distance: 4 mm
- Working Voltage: 6-36V DC,
- Current Output: 300mA
- Output type: PNP, NO(Normally Open)
- Weight: 40.8 g
Wiring & Pinout
- Brown: Positive Supply (+VCC, 6-36V).
- Blue: Negative/Ground (GND).
- Black: Signal Output (PNP Sink).
Usage Tips
- Microcontroller Connection: Because the sensor operates at a minimum of 6V, its signal output can damage 5V or 3.3V microcontrollers like Arduino. You should use a voltage divider or a zener diode to drop the black wire’s voltage to a safe level for your board.
- Object Detection: Inductive sensors only detect conductive metals (iron, steel, aluminum, copper). Non-ferrous metals like aluminum will significantly reduce the effective sensing distance compared to iron.
- Status Indicator: A red LED on the back of the sensor body provides immediate visual confirmation when a metal target is detected.
- Types: LJ12A3-4-Z/BY
- Mounting Hole Diameter: 12 mm
- Detecting Distance: 4 mm
- Working Voltage: 6-36V DC,
- Current Output: 300mA
- Output type: PNP, NO(Normally Open)
- Weight: 40.8 g
Based on 0 reviews
Be the first to review “LJ12A3-4-Z/BY PNP NO Inductive Proximity Sensor Switch DC 6V-36V”
You must be logged in to post a review.
Related products
-
General Sensors, Modules and Breakout Boards, Sensors & Transducers
5v Laser Receiver Module High Level Laser Light Detected Sensor Module For Arduino
General Sensors, Modules and Breakout Boards, Sensors & Transducers5v Laser Receiver Module High Level Laser Light Detected Sensor Module For Arduino
Laser Receiver Sensor Module, Output high level when receive laser signal, Output low level when not receive laser signal. Buy online in Pakistan. Working at 5V.
SKU: 0136 -
-
Gas Sensors, Modules and Breakout Boards, Sensors & Transducers
MQ-4 Methane/ Natural Gas Sensor Module for Arduino
Gas Sensors, Modules and Breakout Boards, Sensors & TransducersMQ-4 Methane/ Natural Gas Sensor Module for Arduino
- Good sensitivity to Combustible gas in wide range
- High sensitivity to CH4, Natural gas.
- Small sensitivity to alcohol, smoke.
- Fast response Stable and long life
- Simple drive circuit
SKU: 0128 -
Modules and Breakout Boards, Sensors & Transducers, Temperature Sensor
MAX6675 Module + K Type Thermocouple
Modules and Breakout Boards, Sensors & Transducers, Temperature SensorMAX6675 Module + K Type Thermocouple
This temperature sensor and module makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) to provide accurate temperature compensated measurement of the supplied K-Type thermocouple sensor. This sensor is available at electrobes shop online in Pakistan.
SKU: 0141
There are no reviews yet.