LCD & Display
Showing all 33 resultsSorted by latest
- Audio & Visual, LCD & Display
7 Inch HMI LCD Display Touch Panel with Shell DMG80480C070_15WTR (Commercial grade)
Audio & Visual, LCD & Display7 Inch HMI LCD Display Touch Panel with Shell DMG80480C070_15WTR (Commercial grade)
The 7 inch HMI LCD Resistive Touch Display with Shell is a Seamless Human Machine Interface (HMI) display module solution that provides a control and visualization interface for any Raspberry Pi and Arduino kits.
SKU: 1848 - Audio & Visual, LCD & Display
10.1 Inch HDMI LCD Display Touch Panel HDW101_001L 1024×600 Pixels
The 10.1 inch HDMI LCD Capacitive Touch Display is a Seamless Human Machine Interface (HMI) display module solution that provides a control and visualization interface for any Raspberry Pi and Arduino kits.
SKU: 1847 - Audio & Visual, LCD & Display
10.1 Inch HMI LCD Display Touch Panel DMG10600C101_04WTC (Commercial grade)
Audio & Visual, LCD & Display10.1 Inch HMI LCD Display Touch Panel DMG10600C101_04WTC (Commercial grade)
The 10.1 inch HMI LCD Touch Display is a Seamless Human Machine Interface (HMI) display module solution that provides a control and visualization interface for any Raspberry Pi and Arduino kits.
SKU: 1846 - Audio & Visual, LCD & Display
7 Inch HMI LCD Display Touch Panel DMG80480C070_04WTC (Commercial grade)
Audio & Visual, LCD & Display7 Inch HMI LCD Display Touch Panel DMG80480C070_04WTC (Commercial grade)
The 7 inch HMI LCD Touch Display is a Seamless Human Machine Interface (HMI) display module solution that provides a control and visualization interface for any Raspberry Pi and Arduino kits.
SKU: 1845 - Audio & Visual, LCD & Display
7 Inch Nextion HMI Serial Touch Display Board Module NX8048T070 Multifunction HMI Resistive Touch
Audio & Visual, LCD & Display7 Inch Nextion HMI Serial Touch Display Board Module NX8048T070 Multifunction HMI Resistive Touch
The 7″ Nextion HMI LCD Capacitive Touch Display is a Seamless Human Machine Interface (HMI) display module solution that provides a control and visualization interface for any Raspberry Pi and Arduino kits. Nextion is mainly applied to lot or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube, and, it is best intelligent display module in the market.
SKU: 1719 - Audio & Visual, LCD & Display
NEXTION 7.0” Intelligent LCD Touch Display Module NX8048P070-011R Multifunction HMI Resistive Touch
Audio & Visual, LCD & DisplayNEXTION 7.0” Intelligent LCD Touch Display Module NX8048P070-011R Multifunction HMI Resistive Touch
The NEXTION 7.0” Intelligent LCD Touch Display Module NX8048P070-011C/C Multifunction HMI Capacitive Touch is a Seamless Human Machine Interface (HMI) display module solution that provides a control and visualization interface for any Raspberry Pi and Arduino kits. Nextion is mainly applied to lot or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube, and, it is best intelligent display module on the market.
SKU: 1321 - Audio & Visual, LCD & Display
3.5 inch TFT Touchscreen Display for Arduino UNO / Leonardo / MEGA Shield
-10%
Audio & Visual, LCD & Display3.5 inch TFT Touchscreen Display for Arduino UNO / Leonardo / MEGA Shield
- 3.5-inch TFT color LCD, high brightness with Touchscreen interface. Plastic stylus pen included!
- Graphical display, 480*320 pixels, high resolution
- Arduino Shield compatible with Arduino MEGA, UNO and Leonardo
- Hardware support for SD card socket and SPI Flash circuit
- Bonus extra feature: embedded temperature sensor
SKU: 1441 - Audio & Visual, LCD & Display
7 inch 1024 x 800 HDMI Capacitive Touch Screen LCD Display for Raspberry Pi
Audio & Visual, LCD & Display7 inch 1024 x 800 HDMI Capacitive Touch Screen LCD Display for Raspberry Pi
– 7 inch TFT touch Screen LCD Raspberry Pi Shield has a resolution of 1024 x 640 pixels.
– 7 inch standard LCD display, 1024 x 600 (Pixel), IPS screen, Full view.
– Capacitive touch screen, supports 5-point touch.
– Compatible with Raspberry Pi 4 Model B/ 3B/ B+ (Provide full image or separate driver).
– For Raspberry Pi, you can run and Ubuntu(only provide the image for Pi 4B/3B/2B).
– Compatible with BeagleBone Black and Banana Pi/Pro (Provide a full image).
– USB touch and HDMI display don’t occupy any GPIO.
– Support win7/win8/win10, No driver.
– Support backlight independent control, turn off backlight to save power.
SKU: 1404 - Audio & Visual, LCD & Display
5 Inch 800*480 TJC Capacitive Touch HMI Serial Interface Display For Arduino and Raspberry Pi
Audio & Visual, LCD & Display5 Inch 800*480 TJC Capacitive Touch HMI Serial Interface Display For Arduino and Raspberry Pi
The 5″ TJC HMI LCD Touch Display is a Seamless Human Machine Interface (HMI) display module solution that provides a control and visualization interface for any Raspberry Pi and Arduino kits.
SKU: 1322 - Audio & Visual, LCD & Display
7 Inch 800*480 TJC Capacitive Touch HMI Serial Interface Display For Arduino and Raspberry Pi
-13%
Audio & Visual, LCD & Display7 Inch 800*480 TJC Capacitive Touch HMI Serial Interface Display For Arduino and Raspberry Pi
The 7″ TJC HMI LCD Touch Display is a Seamless Human Machine Interface (HMI) display module solution that provides a control and visualization interface for any Raspberry Pi and Arduino kits.
SKU: 1320 - Audio & Visual, LCD & Display
MAX7219 Dot LED Matrix 4×1 Module MCU Control Unit
- MAX7219 is an integrated serial input / output common-cathode display driver, it connects the microprocessor 7-segment digital LED display with 8 digits, you can also connect a bar graph display or 64 independent LED. Thereon including a B-type BCD encoder chip, multi-channel scanning loop segment word driver, but also a static RAM 8 * 8 for storing each data. Only one external register is used to set the segment current of each LED.
- A convenient four-wire serial interface can be connected to all general-purpose microprocessor. Each data can be addressed in the update do not need to rewrite all of the display. MAX7219 also allows each user to select a data coding or non-coding.
- The entire device contains a 150μA low-power shutdown mode, analog and digital brightness control, a scan-limit register allows the user to display data bits 1-8, and one for all LED luminescence detection mode.
- It requires only three IO ports to drive a dot matrix! No flicker when the dot matrix display! Support cascading!
SKU: 1226 - Audio & Visual, LCD & Display
MAX7219 Dot LED Matrix Module MCU Control Unit
The module is a 12-pin display module with a 4-point common digital tube (0.36 inch) with a clock point. The driver chip is TM1637. It only needs 2 signal lines to enable the MCU to control the 4-bit 8- Segment digital tube.
SKU: 1225 - Audio & Visual, LCD & Display
7×5 LED Dot Matrix 40x50mm
LED MATRIX MODULES are available in different modules and each module will have different pin configuration. Here we have shown the pin configuration of 1388A LED matrix module. Different modules may have different pinout configuration but they have same functioning pins.
SKU: Z-1223 - Audio & Visual, LCD & Display
4 Bits TM1637 Digital Tube LED 7 Segments Display Module
The module is a 12-pin display module with a 4-point common digital tube (0.36 inch) with a clock point. The driver chip is TM1637. It only needs 2 signal lines to enable the MCU to control the 4-bit 8- Segment digital tube.
SKU: 1057 - Audio & Visual, LCD & Display
12864 128X64 KS0108 Dots Graphic LCD Display Module (Blue Color Backlight)
Audio & Visual, LCD & Display12864 128X64 KS0108 Dots Graphic LCD Display Module (Blue Color Backlight)
The 12864B Graphic LCD module is a 128×64 pixel LCD display with a blue backlight and white foreground. The display is fully programmable and can display a combination of both graphics and text. It can operate in both parallel and serial (SPI) modes which can be configured by the external pin PSB. In SPI mode only 3 data pins are required to drive this display.
SKU: 0957 - Audio & Visual, LCD & Display
8×2 LCD Display 0802 Character Display – Yellow Green
WH0802A1 is an 8 character by 2 lines 8×2 character LCD display. This 8×2 LCD module is available in various LCD panel colors including gray, yellow/green and blue LCD options. 0802 LCD module is built in with ST7066 controller (or equivalent). WH0802A1 model has different interfaces available, it’s default 6800 4/8-bit parallel 6800 interface, also it’s optional SPI and I2C by using RW1063 IC.
SKU: 0956 - Audio & Visual, LCD & Display
0.96 Inch 128×64 IIC I2C OLED Blue Display Module For Arduino
This OLED display module is small, only 0.96″ inch diagonal, it is made of 128×64 individual blue OLED pixels, each one is turn on or off by the controller chip. It has white backlight and can work without backlight, OLED display is higher compared to that of LCD display, you will like the miniature for its crispness. This module uses I2C to communicate with microcontroller such as Arduino.
SKU: 0537 - Audio & Visual, LCD & Display
1.3 Inch 128×64 IIC I2C OLED Blue Display Module For Arduino
This OLED display module is small, only 1.3″ inch diagonal, it is made of 128×64 individual blue OLED pixels, each one is turn on or off by the controller chip. It has white backlight and can work without backlight, OLED display is higher compared to that of LCD display, you will like the miniature for its crispness. This module uses I2C to communicate with microcontroller such as Arduino.
SKU: 0955 - Arduino Shield, Audio & Visual, Compatibles for Arduino, LCD & Display, Modules and Breakout Boards
1602 16×2 LCD Keypad Shield For Arduino
Arduino Shield, Audio & Visual, Compatibles for Arduino, LCD & Display, Modules and Breakout Boards1602 16×2 LCD Keypad Shield For Arduino
This is a very popular 16×2 LCD Keypad shield for Arduino or Freeduino board. It includes a 2×16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD. Analog Pin 0 is used to read the push buttons.
SKU: 0805 - Audio & Visual, LCD & Display
16×2 LCD Display 1602 Character Display for Arduino – Blue
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Each character is build by a 5×8 pixel box
- Can work on both 8-bit and 4-bit mode
- It can also display any custom generated characters
- Backlight Color: Blue
SKU: 0804 - Audio & Visual, LCD & Display
16×2 LCD Display 1602 Character Display – Green
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Each character is build by a 5×8 pixel box
- Can work on both 8-bit and 4-bit mode
- It can also display any custom generated characters
- Backlight Color: Green
SKU: 0803 - Audio & Visual, LCD & Display
2.4 Inch ILI9341 Touchscreen TFT LCD Display Screen Shield Module For Arduino UNO R3 Board
Audio & Visual, LCD & Display2.4 Inch ILI9341 Touchscreen TFT LCD Display Screen Shield Module For Arduino UNO R3 Board
- Color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor).
- Composed of a color TFT-LCD panel, driver IC, FPC and a back light unit. The module display area contains 320 x 240 pixels.
- The screen uses analog pins A0-A4 for LCD control and touch screen operations, which are in the same position on the UNO and the Mega, so the touch screen should work without any modification.
- The shield comes equipped with a micro SD card reader for easy access to use a software-based SPI library.
- Compatible with Arduino UNO R3 Mega2560 DUE.
SKU: 0177 - Audio & Visual, LCD & Display
7 Segment BCD Display 0.5″ Common Cathode
- Available in two modes Common Cathode (CC) and Common Anode (CA)
- Available in many different sizes like 9.14mm,14.20mm,20.40mm,38.10mm,57.0mm and 100mm (Commonly used/available size is 14.20mm)
- Available colours: White, Blue, Red, Yellow and Green (Res is commonly used)
- Low current operation
- Better, brighter and larger display than conventional LCD displays.
- Current consumption : 30mA / segment
- Peak current : 70mA
SKU: 0471 - Audio & Visual, LCD & Display
7 Segment Display 0.5″ Common Anode
- Available in two modes Common Cathode (CC) and Common Anode (CA)
- Available in many different sizes like 9.14mm,14.20mm,20.40mm,38.10mm,57.0mm and 100mm (Commonly used/available size is 14.20mm)
- Available colours: White, Blue, Red, Yellow and Green (Res is commonly used)
- Low current operation
- Better, brighter and larger display than conventional LCD displays.
- Current consumption : 30mA / segment
- Peak current : 70mA
SKU: 0470
