Modules and Breakout Boards
Showing 97–144 of 391 resultsSorted by latest
-
Compatibles for Arduino, Mainboards, Modules and Breakout Boards
Arduino UNO WiFi R3 ATmega328P + ESP8266 8Mb USB-TTL CH340G Development Board
-13%
Compatibles for Arduino, Mainboards, Modules and Breakout BoardsArduino UNO WiFi R3 ATmega328P + ESP8266 8Mb USB-TTL CH340G Development Board
The Arduino Uno Wi-Fi is the same as an Arduino Uno Rev3 but with an integrated Wi-Fi module! The board is based on the ATmega328P with an ESP8266 Wi-Fi Module integrated.
SKU: 1730 -
Modules and Breakout Boards, Relay Boards
12V 2 Channel 10A Relay Module
- Operating Voltage: 12V DC
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- Mounting holes provided
SKU: 1725 -
Compatibles for Arduino, Mainboards, Modules and Breakout Boards
Arduino UNO R3 Starter Learning Kit for Beginners
Compatibles for Arduino, Mainboards, Modules and Breakout BoardsArduino UNO R3 Starter Learning Kit for Beginners
The best place to start with coding, electronics, is with an Arduino Starter Kit. This Kit is the ideal introduction to the field of electronics since it includes all the necessary parts in one convenient package. Due to the fact that all of the hardware and software in Arduino Kit is open source, even those without any prior knowledge of electronics or programming may use them.
SKU: 1723 -
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, EV Parts, Modules and Breakout Boards
24V 6S 40A 18650 Li-Ion Lithium Battery Protection Board Solar Lighting BMS PCB with Balance Charging for E-bike Scooter
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, EV Parts, Modules and Breakout Boards24V 6S 40A 18650 Li-Ion Lithium Battery Protection Board Solar Lighting BMS PCB with Balance Charging for E-bike Scooter
BMS (Battery Management System) – a battery management system designed to monitor the status of batteries, control the process of charging/discharging the battery, etc.
Six batteries (18650) can be connected simultaneously to this charge-discharge controller module. The module has protection against short circuits, overcharge and over-discharge. One of the functions of the charge controller is to turn off the power supply for the batteries when the maximum capacity of at least one battery is reached. This BMS controller is designed for more than 30,000 hours of operation. The maximum allowable current is 40 A.
If the maximum permissible value of the supply voltage is exceeded, the charge controller activates the “protection” mode. In order to restore the module, it is necessary to re-apply voltage to the input of the BMS board or wait a while until the charge controller automatically disables protection.
SKU: 1722 -
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
3S 60A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS Board Balanced Charging Module
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards3S 60A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS Board Balanced Charging Module
3S 60A 12.6V Cell 18650 Li-ion Lithium Rechargeable Battery Charging 3 cell BMS Battery charge protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: 1717 -
Modules and Breakout Boards, Sensors & Transducers, Temperature Sensor
DHT22 Temperature and Humidity Sensor Module – AM2302
Modules and Breakout Boards, Sensors & Transducers, Temperature SensorDHT22 Temperature and Humidity Sensor Module – AM2302
AM2301 DHT 21 temperature and humidity is a sensor unit that is able to generate calibrated digital output signals. It is very reliable and stabile for long periods of operation. It contains a 8 – bit microcontroller internally and responses clear and fast.
SKU: 1714 -
Modules and Breakout Boards, Voltage, Current & Power
2in1 DC 0-100V Voltmeter Ammeter With DC 100A 75mV Ampere Shunt Dual 0.28″ Red Blue Voltage Detector Current Indicator
Modules and Breakout Boards, Voltage, Current & Power2in1 DC 0-100V Voltmeter Ammeter With DC 100A 75mV Ampere Shunt Dual 0.28″ Red Blue Voltage Detector Current Indicator
0.28” digital voltage ampere meter voltmeter ammeter DC 0-100V 100A red and blue dual LED display voltage amperage current meter 2 in 1 tester with 100A/75mV shunt resistor
SKU: 1713 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
YF-S201C G 1/2″ Water Flow Sensor Fluid Flowmeter Switch Counter 1-30L/min Meter
General Sensors, Modules and Breakout Boards, Sensors & TransducersYF-S201C G 1/2″ Water Flow Sensor Fluid Flowmeter Switch Counter 1-30L/min Meter
1/2 inch 12.5mm YF-S201C Hall Effect Water Flow Meter Sensor measures water flow rate consists of a plastic valve body, a water rotor and a hall-effect sensor.
SKU: 1711 -
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry Pis
HDMI Female To Micro HDMI Male Adapter
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry PisHDMI Female To Micro HDMI Male Adapter
- Color: Black
- 100% Brand New
- Suggested Applications: HDTVs, HD DVs, Camera, Game Consoles With HDMI And HDMI Type C Mini Connectors
- Convert Your HDMI Cable To Any HDMI Mini Connection.
SKU: 1688 -
Modules and Breakout Boards, Proximity/Distance Sensors, Sensors & Transducers
LJ12A3-4-Z/BX NPN NO Inductive Proximity Sensor Switch DC 6V-36V
Modules and Breakout Boards, Proximity/Distance Sensors, Sensors & TransducersLJ12A3-4-Z/BX NPN NO Inductive Proximity Sensor Switch DC 6V-36V
- Mounting hole diameter: 12mm
- Detecting distance: 4mm
- Working voltage: 10-30 VDC
- Current output: 200mA
- Output type: NPN, NO(Normally Open)
- Set distance: 0-3.6mm
- Detect Object: Magnetic Metal
SKU: 1693 -
Arduino Shield, Compatibles for Arduino, Modules and Breakout Boards
Prototyping Prototype Shield with Mini Breadboard compatible with Arduino MEGA 2560 R3
Arduino Shield, Compatibles for Arduino, Modules and Breakout BoardsPrototyping Prototype Shield with Mini Breadboard compatible with Arduino MEGA 2560 R3
- EASY TO INSTALL: Due to its compact design, it can be easily installed on the MEGA 2560 and other similar modules
- SEVERAL APPLICATIONS: With the included Mini Breadboard you can easily wire up various projects directly on the microcontroller
- READY TO USE: Thanks to the integrated buttons and LED, the input and output possibilities are simple, no additional parts or wiring are required – ready to work!
SKU: 1692 -
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
3S 10A 12.6V Cell 18650 Li-ion Lithium Battery Balanced Charging BMS Board with Protection Charger Module
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards3S 10A 12.6V Cell 18650 Li-ion Lithium Battery Balanced Charging BMS Board with Protection Charger Module
3S 10A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
SKU: 0732 -
Breakout Boards, Modules and Breakout Boards
W5500 SPI to Ethernet LAN Network Module
The Ethernet module for Arduino and compatible boards based on the Wiznet W5500 chip, faster than the previous W5100. It provides an easy way to connect your module to the local network and internet based WIZNET with a TCP/IP interface. Compatible with libraries with the same Ethernet API. A web server can be built with this shield. It can be used as a server or as a client.
SKU: 1538 -
Converters, EV Parts, Modules and Breakout Boards
2000W 9-50V 40A DC Electronic Speeder PWM Motor Speed Controller
Converters, EV Parts, Modules and Breakout Boards2000W 9-50V 40A DC Electronic Speeder PWM Motor Speed Controller
This is a simple and easy-to-use 40A High Power DC motor speed controller of small size, elegant appearance and stable performance. It is made with high quality circuit board which ensures a longer service life. Buy online in Pakistan
SKU: 1537 -
Arduino Tools & Kits, Compatibles for Arduino, Modules and Breakout Boards
SX1278 LoRa Module 433MHz 10KM Ra-02 Wireless Spread Spectrum Transmission Module
-23%
Arduino Tools & Kits, Compatibles for Arduino, Modules and Breakout BoardsSX1278 LoRa Module 433MHz 10KM Ra-02 Wireless Spread Spectrum Transmission Module
The Arduino Esplora is a microcontroller board derived from the Arduino Leonardo. The Esplora differs from all preceding Arduino boards in that it provides a number of built-in, ready-to-use set of onboard sensors for interaction, including a joystick, a slider, a temperature sensor, an accelerometer, a microphone, and a light sensor.
SKU: 1530 -
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
4S 20A 14.8V Cell 18650 Li-ion Lithium Battery Balanced Charging BMS PCB Board with Protection
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards4S 20A 14.8V Cell 18650 Li-ion Lithium Battery Balanced Charging BMS PCB Board with Protection
Battery Protection Board 4S 20A 14.8V BMS for 18650 Lithium Ion Cell HX-4S-A20. prevent it from being over-discharged / over-charged during use. Buy in Pakistan
SKU: 1615 -
Converters, Modules and Breakout Boards
LM2596 DC 6V-40V To 5V 3A Double USB Charge DC-DC Step-down Converter Module
-10%
Converters, Modules and Breakout BoardsLM2596 DC 6V-40V To 5V 3A Double USB Charge DC-DC Step-down Converter Module
Dual USB Output LM2596 Buck Converter is a step down module and has a dual 5V output for charging Phone, MP3, MP4, PSP, or powering Arduino, Raspberry Pi, etc. 100% Brand new and high quality! This module has short circuit protection DIY Mobile Power Supply with two 5V output USB ports with 3A output current.
SKU: 1611 -
Modules and Breakout Boards, Voltage, Current & Power
ZMPT101B Single Phase AC Voltage Sensor Module
This Single-phase AC active output voltage mutual inductance module is equipped with ZMPT101B series of high-precision voltage transformer and high-precision op-amp current, easy to 250v within the AC power signal acquisition.
SKU: 1620 -
General Electronic Boards, Modules and Breakout Boards
1203B 3A PWM DC Motor Speed Controller Module
Operating instruction:
Before you attempt to wire the controller, make sure power is off.
WARNING: DO NOT REVERSE POSITIVE AND NEGATIVE POWER LOADS. THIS WILL DAMAGE THE CONTROLLER.
TO CHANGE MOTOR DIRECTION, INTERCHANGE THE POSITIVE AND NEGATIVE WIRES OF MOTOR.
1. Connect wires refer to the “wiring diagram”.
2. Turn on the power, and adjust the potentiometer.
3. The LED indicates the power up and the speed of a motor.
SKU: 1627 -
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
7S 20A 24V Li-ion Lithium 18650 Battery BMS Packs PCB Protection Board With Matching Cable Automatic Protection Function
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards7S 20A 24V Li-ion Lithium 18650 Battery BMS Packs PCB Protection Board With Matching Cable Automatic Protection Function
suitable for parties: Widely used in computer, mobile phone and other digital products which can be easily damaged for a long time, and suitable for different types of parties.
voltage regulator: This is a new type of battery with multiple protection functions for the battery case, and the lcd display can be set up as an external power supply mode or lithium battery.
SKU: 1628 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
Capacitive Soil Moisture Sensor Corrosion Resistant Wide Voltage Wire Analog V2.0
General Sensors, Modules and Breakout Boards, Sensors & TransducersCapacitive Soil Moisture Sensor Corrosion Resistant Wide Voltage Wire Analog V2.0
This capacitive soil moisture sensor V2.0 measures soil moisture levels by capacitive sensing rather than resistive sensing like other sensors on the market. It is made of corrosion-resistant material which gives it excellent service life. Insert it into the soil around your plants and impress your friends with real-time soil moisture data!
SKU: 1625 -
Converters, Modules and Breakout Boards
USB to RS485 / USB 2.0 to RS 485 Serial Converter Adapter
This USB to RS-485 converter uses the high-performance CH340T microchip. It supports the latest operating system, including 64 bit Windows 10. The device has TVS surge protection as well as USB self-recovery protection. No external power supply or data cable needed.
SKU: 1603 -
Development Boards, Modules and Breakout Boards, STM Boards
STM32F429I-DISC1 Discovery Kit STM32F4 Series Touch Screen STM32F429ZIT6 STM32 Development Board
Development Boards, Modules and Breakout Boards, STM BoardsSTM32F429I-DISC1 Discovery Kit STM32F4 Series Touch Screen STM32F429ZIT6 STM32 Development Board
Original STM32F429I-DISC1 Discovery Kit 32 bit MCU, STM32F4 Series with 2.4 inch Touch Screen and STM32F429ZIT6 High performance chip. Buy STM32 Development Board in Pakistan
SKU: 1601 -
Converters, Modules and Breakout Boards
PWM DC Motor Speed Controller Switch DC 20A Current Voltage Regulator 10-60V PWM High Power Drive Module 60A 12V 24V 36V 48V
-19%
Converters, Modules and Breakout BoardsPWM DC Motor Speed Controller Switch DC 20A Current Voltage Regulator 10-60V PWM High Power Drive Module 60A 12V 24V 36V 48V
This is a simple and easy-to-use 20A High Power DC motor speed controller of small size, elegant appearance and stable performance. It is made with high quality circuit board which ensures a longer service life. Buy online in Pakistan
SKU: 1577 -
Converters, Modules and Breakout Boards
300W XL4016 DC-DC Max 9A Step Down Buck Converter 5-40V To 1.2-35V Adjustable Power Supply Module LED Driver
Converters, Modules and Breakout Boards300W XL4016 DC-DC Max 9A Step Down Buck Converter 5-40V To 1.2-35V Adjustable Power Supply Module LED Driver
This 300W 9A Buck Converter uses two XLSEMI XL4016 voltage regulators to reduce input voltages from 7 – 40 V to adjustable output voltages between 1 and 35 Volts. The large heat sinks enables high output currents of up to 9A max. and a limiting output of 300W. The second trimmer on the board is used to set up the current limit.
SKU: 1576 -
Modules and Breakout Boards, Wireless Communication
ESP32-CAM WiFi Bluetooth Camera Module Development Board ESP32 with Camera Module OV2640 2MP
Modules and Breakout Boards, Wireless CommunicationESP32-CAM WiFi Bluetooth Camera Module Development Board ESP32 with Camera Module OV2640 2MP
- Onboard ESP32-S module, supports WiFi + BT
- OV2640 camera with flash
- Onboard TF card slot, supports up to 4G TF card for data storage
- Supports WiFi video monitoring and WiFi image upload
- Supports multi sleep modes, deep sleep current as low as 6mA
- Control interface is accessible via pinheader, easy to be integrated and embedded into user products
SKU: 1533 -
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry Pis
Heat Sink Copper Heatsink Radiator Cooling Kit Cooler For Raspberry Pi 4 Model B
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry PisHeat Sink Copper Heatsink Radiator Cooling Kit Cooler For Raspberry Pi 4 Model B
A complete set of heats sinks for Rapsberry pi, which provide coolant facility to Raspberry Pi. It is made of Pure Copper for better performance. The fins increase the area of the board and thus provide for greater heat transfer.
SKU: 1491 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
MAX30100 Heart Rate Oxygen Pulse Breakout Sensor Module For Arduino
General Sensors, Modules and Breakout Boards, Sensors & TransducersMAX30100 Heart Rate Oxygen Pulse Breakout Sensor Module For Arduino
The MAX30100 is an integrated pulse oximetry and heart-rate monitor module. It includes internal LEDs, photodetectors, optical elements, and low-noise electronics with ambient light rejection.
SKU: 1481 -
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
3S 40A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS Board Balanced Charging Module
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards3S 40A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS Board Balanced Charging Module
3S 40A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection and Balanced Charging Module. Buy online in Pakistan.
SKU: 1480
