Modules and Breakout Boards
Showing 145–192 of 398 resultsSorted by latest
-
Modules and Breakout Boards, Wireless Communication
ESP32-CAM WiFi Bluetooth Camera Module Development Board ESP32 with Camera Module OV2640 2MP
Modules and Breakout Boards, Wireless CommunicationESP32-CAM WiFi Bluetooth Camera Module Development Board ESP32 with Camera Module OV2640 2MP
- Onboard ESP32-S module, supports WiFi + BT
- OV2640 camera with flash
- Onboard TF card slot, supports up to 4G TF card for data storage
- Supports WiFi video monitoring and WiFi image upload
- Supports multi sleep modes, deep sleep current as low as 6mA
- Control interface is accessible via pinheader, easy to be integrated and embedded into user products
SKU: 1533 -
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry Pis
Heat Sink Copper Heatsink Radiator Cooling Kit Cooler For Raspberry Pi 4 Model B
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry PisHeat Sink Copper Heatsink Radiator Cooling Kit Cooler For Raspberry Pi 4 Model B
A complete set of heats sinks for Rapsberry pi, which provide coolant facility to Raspberry Pi. It is made of Pure Copper for better performance. The fins increase the area of the board and thus provide for greater heat transfer.
SKU: 1491 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
MAX30100 Heart Rate Oxygen Pulse Breakout Sensor Module For Arduino
General Sensors, Modules and Breakout Boards, Sensors & TransducersMAX30100 Heart Rate Oxygen Pulse Breakout Sensor Module For Arduino
The MAX30100 is an integrated pulse oximetry and heart-rate monitor module. It includes internal LEDs, photodetectors, optical elements, and low-noise electronics with ambient light rejection.
SKU: 1481 -
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
3S 40A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS Board Balanced Charging Module
-7%
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards3S 40A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS Board Balanced Charging Module
3S 40A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection and Balanced Charging Module. Buy online in Pakistan.
SKU: 1480 -
Compatibles for Arduino, Mainboards, Modules and Breakout Boards
Arduino UNO R3 Development Board ATmega328P DIP Microcontroller
-27%
Compatibles for Arduino, Mainboards, Modules and Breakout BoardsArduino UNO R3 Development Board ATmega328P DIP Microcontroller
Arduino Uno is a microcontroller board based on 8-bit ATmega328P microcontroller. It consists a 16MHz crystal oscillator, serial communication, voltage regulator, etc. to support the microcontroller.
SKU: 0100-1 -
Discrete Electronic Components, Modules and Breakout Boards, Sensors & Transducers, Temperature Sensor, Tools & Accessories
UNI-T UT300H Non Contact Digital Infrared Thermometer Temperature Meter
-33%
Discrete Electronic Components, Modules and Breakout Boards, Sensors & Transducers, Temperature Sensor, Tools & AccessoriesUNI-T UT300H Non Contact Digital Infrared Thermometer Temperature Meter
- Highest accuracy: +/- 0.3’C/0.6’F
- Best measurement distance: 5-10cm
- Display resolution: 0.1’C/0.1’F
- Repeatability: 0.3’C/0.6’F
- High temperature alarm threshold: 37.2’C
- Working environment: 15’C ~ 30’C (59’F ~ 86’F), <85% RH
- Transportation and storage environment: -20’C ~ 60’C (-4’F ~ 140’F), <85% RH
SKU: 1438 -
Modules and Breakout Boards, Wireless Communication
MiFare 125kHz Classic Blank RFID Card Key Tag
Could be modified many times. Lightweight and portable to carry. Convenient to use. Replacement card of your old one. UID cards have 16 Sectors and 4 Blocks each Sector. Organized in 16 sector with 4 blocks of 16 bytes each(one block include 16 bytes) Just program this UID to the UID of lost card then you have a new Exactly the same card.
SKU: 1437 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
BF350-3AA Strain Gauge Resistive Pressure Force Sensor
General Sensors, Modules and Breakout Boards, Sensors & TransducersBF350-3AA Strain Gauge Resistive Pressure Force Sensor
The BF350-3AA Pressure Resistance Strain Gauge Sensor has 350-ohm nominal resistance which varies when a force is applied. When force has been applied the resistance of the sensor is changed which is used to measure the amount of force applied.
SKU: 1432 -
Modules and Breakout Boards, Wireless Communication
XL4432-SMT SI4432 Wireless Transceiver Module
- XL4432-SMD is based on the company’s Silicon relevant information from well-designed professional manufacturing, the most fitting of various characteristics SI4432.
- Murata high-frequency device module used in all specifications of inductance and capacitance, the crystal of 10ppm precision specifications ensure that the wireless module features to be fully reflected.
- From professional OEM using precision SMT lead- solder cessing, all modules have been professional equipment testing, consistency, and stability of the modules are fully tested.
- SPI interface, small size volume, convenient Stamp Interface embedded design, fully extended from your equipment performance to the next level.
SKU: 1430 -
Modules and Breakout Boards, Sensors & Transducers, Temperature Sensor
KY-028 Temperature Sensor Module
Modules and Breakout Boards, Sensors & Transducers, Temperature SensorKY-028 Temperature Sensor Module
Digital Temperature Sensor KY-028 for Arduino, it measures temperature changes based on the thermistor resistance. This module has both digital and analog outputs, there’s a potentiometer to adjusts the detection threshold on the digital interface.
SKU: 1428 -
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry Pis
Raspberry Pi Pico WH RP2040 with Soldered Headers
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry PisRaspberry Pi Pico WH RP2040 with Soldered Headers
Raspberry Pi Pico W microcontroller board based on RP2040, featuring 2.4 GHz Wi-Fi connectivity, dual-core Arm Cortex-M0+ processing, and 2 MB onboard flash, in the standard Pico form factor.
SKU: 1425 -
Audio & Sound, Audio & Visual, General Electronic Boards, Modules and Breakout Boards
PAM8610 12V Dual Channel Stereo Audio Amplifier Board
Audio & Sound, Audio & Visual, General Electronic Boards, Modules and Breakout BoardsPAM8610 12V Dual Channel Stereo Audio Amplifier Board
PAM 8610 is a class D audio Amplifier. It offers low THD N, allowing it to achieve high quality sound reproduction. The new filter less architecture allows the device to drive the speaker directly, requiring no low pass output filter, thus to save the system cost and PCB area. with the same numbers of external components. the efficiency of PAM8610 is much better than that of class AB. It can extend the battery life.
SKU: 1424 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
Liquid pH Sensor With BNC pH Electrode Probe For Arduino
-12%
General Sensors, Modules and Breakout Boards, Sensors & TransducersLiquid pH Sensor With BNC pH Electrode Probe For Arduino
- The pH stands for the power of hydrogen, which is a measurement of the hydrogen ion concentration in the body.
- The total pH scale ranges from 1 to 14.
- 7 considered to be neutral.
- A pH less than 7 is said to be acidic.
- solutions with a pH greater than 7 are basic or alkaline.
- Heating voltage: 5 ± 0.2V (AC · DC)
- Working current: 5-10mA
- Detectable concentration range: PH0-14
- Detection Temperature range: 0-80 ℃
- Component Power: ≤0.5W
SKU: 1418 -
Modules and Breakout Boards, STM Boards
STM8 Development Board STM8S003F3P6 Module
- The development board using Micro USB cable supply, compatible with smart phone lines, data lines is simple and easy to get, but not USB Mini line-powered.
- Use STM8S103F3P6 as the master IC.
- 5V pin’s voltage is the input voltage of the module.
SKU: 1415 -
Modules and Breakout Boards, Relay Boards
Timer Relay 6 To 30V Adjustable Delay Timer
This is a timer relay suitable for your incubator and other time-related projects. Timer relay is a Digital display Led Home Automation Delay Timer Control Switch Module Timer Controller, Operating voltage: 6-30V, support micro USB 5.0V power supply, Can control the device within DC 30V 5A or AC 220V 5A; It can be applied to many fields; wide range of application.
SKU: 1410 -
Modules and Breakout Boards, STM Boards
ST Link V2 Programmer For STM8 & STM32 Microcontroller
Mini ST-LINK V2, fully consistent with the official version, support for automatic upgrades, support the full range STM32 SWD (only 4pins including SWCLK, SWDIO, and power) and a full range STM8 SWIM (only 4pins including SWIM, Reset and power) download and debug.
SKU: 1409 -
-
Development Boards, Modules and Breakout Boards, STM Boards
ST-LINK V2 (CN) – STM8 / STM32 Programmer & Debugging Emulator
Development Boards, Modules and Breakout Boards, STM BoardsST-LINK V2 (CN) – STM8 / STM32 Programmer & Debugging Emulator
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
SKU: 1408 -
Modules and Breakout Boards, Wireless Communication
JT308 USB 125Khz RFID Card reader module windows
1. MIFARE Classic 1K Chip
2. 13.56MHZ
3. Blue color
4. ABS Material, waterproof.
5. With metal ring.
6.can work with RC522 and PN532
7.block 0 can’t change, UID Can’t change, please contact with us if you are not sure about your chip.
8.ISO14443A
MIFARE and MIFARE Classic are trademarks of NXP B.V.SKU: 1405 -
Microcontrollers & Programmers, Modules and Breakout Boards
51 AVR Programmer ISP USBASP USB ISP Download Cable
Microcontrollers & Programmers, Modules and Breakout Boards51 AVR Programmer ISP USBASP USB ISP Download Cable
Applicable to WIN 8.1/8/7/XP 32-bit/64-bit system computer.
The product can be directly connected with the computer USB port, the real USB download device, through which to connect the target board the microcontroller can be downloaded programming easy to use, especially for notebook computers, desktop computer, through the USB port programming download debugging.SKU: 1406 -
General Electronic Boards, Modules and Breakout Boards
15A 400W MOSFET Trigger Switch Driver Module
The board is of high power MOS trigger switch driver module and control board with field-effect tube to adjust the electronic switch. It adopts imported double MOS parallel active output to show lower internal resistance, greater electric current and power.
Besides it works at 15A,400W under common temperature which satisfies most devices usage and realizes the control of great power devices in a relaxed way.SKU: 0743 -
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry Pis
Raspberry Pi 4 model B 8GB Computer Development Board
-13%
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry PisRaspberry Pi 4 model B 8GB Computer Development Board
Raspberry Pi 4 has the ability to interact with the outside world & has been used in digital maker projects. Buy Online Pi 4 with electrobes in Pakistan. Apart from that USB 3, dual HDMI, an upgraded CPU, and massive memory would provide much better performance to run applications.
SKU: 0746 -
Accessories, Batteries & Chargers, Breakout Boards, Modules and Breakout Boards
HW-633 Lithium Battery Protection Module Board for 12-24V Storage Battery
Accessories, Batteries & Chargers, Breakout Boards, Modules and Breakout BoardsHW-633 Lithium Battery Protection Module Board for 12-24V Storage Battery
Battery application: Lead-acid batteries, Solar cells, new energy batteries, Car battery, electric car battery, Lithium-ion battery, polymer battery.
SKU: 1329 -
Audio & Visual, Computer Interface, Modules and Breakout Boards
Mini Thermal Printer for Arduino Development Singlechip Learning
Audio & Visual, Computer Interface, Modules and Breakout BoardsMini Thermal Printer for Arduino Development Singlechip Learning
This package comes with a thermal printer including the print head (it does not require ink), a set of power and data cables, and two plastic shims for panel mounting.
The printer uses very common 2.25″ wide thermal paper, available in any office or stationery supply store. It can fit up to 50 ft of paper in the bay at once.
SKU: 1445 -
Converters, Modules and Breakout Boards
XL4015 5A DC-DC Voltage Step Down Buck Converter 4-38v Input
The XL4015 power module is a DC to DC step-down (BUCK) power module that operates at a switching frequency of 180kHz. In such high frequency, it provides smaller sized filter components compared with low frequency switching regulators.
SKU: 1327 -
Modules and Breakout Boards, STM Boards
STM32f4 STM32f407 Discovery Kit Arm Cortex-M4 Development Board
-32%
Modules and Breakout Boards, STM BoardsSTM32f4 STM32f407 Discovery Kit Arm Cortex-M4 Development Board
The STM32f4 STM32f407 Discovery Kit for STM32F407 kit powers the capabilities of the STM32f4 STM32f407 Discovery Kit high-performance microcontrollers, to allow users to easily develop applications featuring audio. It includes an ST-LINK embedded debug tool, one ST-MEMS digital accelerometer, a digital microphone, one audio DAC with the integrated class D speaker driver, LEDs, push-buttons and a USB OTG micro-AB connector.
SKU: 1324 -
Modules and Breakout Boards, STM Boards
STM32F303 Discovery Evaluation Development Board
The STM32F3DISCOVERY is a discovery kit based on STM32F303VCT6 microcontroller with 256KB flash, 48KB RAM. The STM32F303VCT6 is based on the high performance ARM Cortex-M4 32bit RISC core with FPU operating at a frequency of up to 72MHz and embedding a floating point unit (FPU), a memory protection unit (MPU) and an embedded trace macrocell (ETM). The STM32F3DISCOVERY helps to discover the STM32F3 series Cortex-M4 mixed signals features and to develop our applications easily.
SKU: 1323 -
Modules and Breakout Boards, Sensors & Transducers, Temperature Sensor
DS18B20 Temperature Sensor Waterproof Digital Thermal Probe Temp Sensor – 1M Lead Length
Modules and Breakout Boards, Sensors & Transducers, Temperature SensorDS18B20 Temperature Sensor Waterproof Digital Thermal Probe Temp Sensor – 1M Lead Length
- Sensors For Arduino DS18b20 Temperature Sensor Module
- Product Type : Temperature sensor Module
- Voltage range : 3.5 – 5V DC
- Length : 100 cm.
SKU: 1164





























