DIY
Showing all 19 resultsSorted by latest
- 3D Printer Parts, CNC & 3D Printers
3D Printer filament sensor detection module 1.75mm
3D Printer filament sensor detection module is used to detect filament. Some times filament breaks so the sensor detects it.
Used with Lerdge board:
When there is filament in, the green light in the module keeps lighting. And when the filament is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the filament can continue to print.
Wiring: Connect the module to the M-sensor port on the motherboard.SKU: CNC-137 - 3D Printer Parts, CNC & 3D Printers, Mechanical, Motors and Driver
Motor Dual Z Stepper Motor Parallel Module Stepping Motor Board With Cable For 3D Printer Kit
3D Printer Parts, CNC & 3D Printers, Mechanical, Motors and DriverMotor Dual Z Stepper Motor Parallel Module Stepping Motor Board With Cable For 3D Printer Kit
This module is only used for motor-side parallel, a driver drives two motors. And only for mini printers or small current motors in parallel (with the same motor in parallel, the current are divided evenly).
SKU: CNC-134 - Robotics & Machines, Servos & Controllers
Multifunction Servo Bracket PTZ Robotic Manipulator DIY Robot Mount
Robotics & Machines, Servos & ControllersMultifunction Servo Bracket PTZ Robotic Manipulator DIY Robot Mount
This Multifunctinal steering brackets is designed to fit most standard sized servos. This bracket is both lightweight and strong. Various holes are located on the bracket that fit most servo horns.
These brackets are light and strong and the numerous mounting holes enable you to easily make custom mechanisms using standard servo motors. Works great for making multi-axis joints for use in robot arms and legs.
SKU: 0966 - Servos & Controllers
Long U-shaped Servo Bracket PTZ Robotic Manipulator DIY Robot Mount
This Long ‘U’ shaped brackets is designed to fit most standard sized servos. This bracket is both lightweight and strong. Various holes are located on the bracket that fit most servo horns.
These brackets are light and strong and the numerous mounting holes enable you to easily make custom mechanisms using standard servo motors. Works great for making multi-axis joints for use in robot arms and legs.
SKU: 0967
