Shop
Showing 1489–1536 of 2025 resultsSorted by latest
-
Modules and Breakout Boards, Sensors & Transducers
ACS712 20A 20 Amp Current Sensor Module
The ACS712 Module uses the famous ACS712 IC to measure current using the Hall Effect principle. The module gets its name from the IC (ACS712) used in the module, so for you final products use the IC directly instead of the module.
SKU: 0756 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & Power
ACS712 5A 5 Amp Current Sensor Module
General Sensors, Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & PowerACS712 5A 5 Amp Current Sensor Module
The ACS712 Module uses the famous ACS712 IC to measure current using the Hall Effect principle. The module gets its name from the IC (ACS712) used in the module, so for you final products use the IC directly instead of the module.
SKU: 0755 -
Modules and Breakout Boards, Sensors & Transducers
Water Level Sensor Liquid Depth Measuring Module for Arduino
Modules and Breakout Boards, Sensors & TransducersWater Level Sensor Liquid Depth Measuring Module for Arduino
A water sensor is a device used in the detection of the water level for various applications. Water sensors can come in several variations that include ultrasonic sensors, pressure transducers, bubblers, and float sensors.
SKU: 0754 -
Modules and Breakout Boards, Robotics & Machines, Stepper Motors & Drivers
L298N H-Bridge Motor Driver Module
Modules and Breakout Boards, Robotics & Machines, Stepper Motors & DriversL298N H-Bridge Motor Driver Module
The L298 motor driver module features:
- Finned Aluminum Heatsink for the L298 IC
- Clamping Rectifiers
- Filter Capacitors for logic-power and moto-power busses
- Onboard 5-Volt DC Regulator (A jumper selects between external 5-Volt power or the onboard 5-volt regulator.)
- Screw Terminal connections for ground, motor power, 5-volt power, and motor outputs
- 0.1 inch-pitch header pins for logic inputs
- Jumpers to tie the enable inputs to ground (if desired)
- Switches up to 2 amps per channel
SKU: 0753 -
Robotics & Machines, Stepper Motors & Drivers
DRV8825 Stepper Motor Driver Soldered Pins with Heat Sink
Robotics & Machines, Stepper Motors & DriversDRV8825 Stepper Motor Driver Soldered Pins with Heat Sink
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 micro stepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of the A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
SKU: 0752 -
Modules and Breakout Boards
CH340 USB to TTL (Serial) HW 597 Converter Module
A simple USB to serial converter with selectable voltage through a jumper. Specifications:
- 3.3V-5V TTL voltages
- Converts TTL logic levels to computer RS232 levels
- Power supplies: 5V, 3.3V, GND (min)
- RX (3.3V-5V)
- TX (3.3V-5V)
SKU: 0751 -
Converters, Modules and Breakout Boards
CP2102 USB 2.0 to TTL UART 6PIN Serial Converter
CP2102 chip from SiLabs is a single chip USB to UART bridge IC. It requires minimal external components. CP2102 can be used to migrate legacy serial port based devices to USB. Hobbyists can use it as a powerful tool to make all kinds of PC interfaced projects. This module help all those who are comfortable with RS232/Serial Communication protocol, to build USB devices very easily.
SKU: 0617 -
Heat Sinks
Heat Sink Aluminium made Self Adhesive Complete Set for Raspberry Pi
A complete set of heats sinks for Rapsberry pi, which provide coolant facility to Raspberry Pi. It is made of Pure Copper for better performance. The fins increase the area of the board and thus provide for greater heat transfer.
SKU: 0900 -
Modules and Breakout Boards
HC SR505 PIR Motion Sensor Module
HC-SR505 is mini PIR (Passive Infra Red) motion sensor module, which as the name implies used for detecting the motion of a body in front of it. The device works based on infrared technology and it can automatic control by itself with high sensitivity and high reliability. Because of the minimum size and low-power operation mode, it widely used in battery-powered applications.
SKU: 0749 -
-
Mechanical, Motors and Driver, Robotics & Machines, Stepper Motors & Drivers
IBT-2 43A H-bridge Double BTS7960 High Power Motor Driver Module
Mechanical, Motors and Driver, Robotics & Machines, Stepper Motors & DriversIBT-2 43A H-bridge Double BTS7960 High Power Motor Driver Module
The drive uses an H-bridge driver module that composed by Infineon power drive chip BTS7960, with overheating and over-current protection. Double BTS7960 H-bridge driver circuit, with strong drive and braking effect, use 74HC244 chip effectively isolate the microcontroller and the motor drive! High Current up to 43A!
SKU: 0740 -
Audio & Visual, General Sensors, Modules and Breakout Boards, Sensors & Transducers
AS608 Fingerprint Reader Optical Sensor Module
Audio & Visual, General Sensors, Modules and Breakout Boards, Sensors & TransducersAS608 Fingerprint Reader Optical Sensor Module
- Optical fingerprint capture for accurate biometric identification
- Compact, low-power design ideal for embedded systems and IoT devices
- Easy serial/UART integration with Arduino, Raspberry Pi, STM32 and other MCUs
- Fast enrollment and verification with onboard template management
- Durable touch surface rated for repeated daily use
- Developer-friendly with example code and rapid prototyping support
SKU: 0738 -
Audio & Visual, General Sensors, Modules and Breakout Boards, Sensors & Transducers
R307 Optical Fingerprint Scanner Module for Arduino
Audio & Visual, General Sensors, Modules and Breakout Boards, Sensors & TransducersR307 Optical Fingerprint Scanner Module for Arduino
- R307 is an optical fingerprint module integrates a fingerprint algorithm chip with functions such as fingerprint entry, image processing, feature extraction, template generation, template storage, fingerprint comparison (1: 1) and fingerprint search (1: N).
- The fingerprint reader can perform secondary development and be embedded in various end products, e.g. For example: access control, presence, safe, car door locks.
- Low power consumption, low cost, small size, excellent performance.
- Professional optical technology, precise module manufacturing technology.
SKU: 0737 -
Cooling Fans, Discrete Electronic Components
DC 12V Cooling Fan 40x40x20mm – Used Condition
- Rated voltage: 12VDC
- Voltage range: 8-13.8VDC
- Rotation speed: 2000 RPM +/- 10%
- Rated current: 0.8A +/- 10%
- Rated power: 1W
- Airflow: 76.72 CFM
- Noise: 33.5dB
- Dimensions: (40 x 40 x 20mm)
- Mounting holes: 0.165″ (4.2mm)
- Life expectancy: 15,000 Hours
SKU: 0773 -
Converters, Modules and Breakout Boards
LM2596 Tripple / Three Variables Buck Adjustable Step Down Power Supply Module DC-DC Converter
Converters, Modules and Breakout BoardsLM2596 Tripple / Three Variables Buck Adjustable Step Down Power Supply Module DC-DC Converter
- Input voltage: 4-35V
- Output Voltage: 1.5-35V (adjustable)
- Output current: rated current 2A, maximum 3A (heat sink required)
- Conversion efficiency: Up to 92% (the higher the voltage, the higher the efficiency)
- Switching Frequency: 150KHz
- Rectifier: Non-Synchronous Rectification
- Module Properties: Non-isolated step-down module (buck)
- Short circuit protection: current limiting
- Operating temperature: Industrial grade (-40 ℃ to +85 ℃) (output power 10W or less)
- Full load temperature rise: 40 ℃
- Load regulation: ± 0.5%
- Voltage regulation: ± 0.5%
- Dynamic response speed: 5% 200uS
- Output ripple:
- Input 12V Output 5V 3A 60mV (MAX)
- Input 24V Output 12V 3A 120mV (MAX)
SKU: 0721 -
Accessories, Adapters, Batteries & Chargers
9V 1000mA / 1 Amp 9W SMPS Power Adapter
- Stabilized Output, low ripple & low interference
- Ideal for CCTV Cameras / Routers / Modems / Cordless Phones / Set Top Boxes / Wireless Devices / POS Machines etc.
- Plug Type – 2 Pin or 3 Pin as per availability
- 5.5mm DC Pin
SKU: 0780 -
Modules and Breakout Boards, Wireless Communication
RFID Tag Key 13.56Mhz Ring Tag Card
1. MIFARE Classic 1K Chip
2. 13.56MHZ
3. Blue color
4. ABS Material, waterproof.
5. With metal ring.
6.can work with RC522 and PN532
7.block 0 can’t change,UID Can’t change,please contact with us if you are not sure about your chip.
8.ISO14443A
MIFARE and MIFARE Classic are trademarks of NXP B.V.SKU: 0733 -
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
2S 3A 7.4V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards2S 3A 7.4V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
2S 3A Li-ion Lithium Battery 7.4V 8.4V 18650 Charger Protection Board Module is a small PCB mounted Li-ion Lithium Battery charger protection module.
SKU: 0731 -
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
3S 10A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards3S 10A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
3S 10A 11.1V-12.6V Cell 18650 Li-ion Lithium Ion Battery Balanced Charging BMS PCB Board with over-charge Protection for 18650, 26650 battery. Buy in Pakistan
SKU: 1539 -
DIP Transistors, Discrete Electronic Components, Transistors
2SC828 NPN Transistor
- Type: NPN
- Collector-Emitter Voltage (Vceo): 25V
- Collector Current (Ic): 0.2A
- Collector-Base Voltage (Vcbo): 30V
- Emitter-Base Voltage: 7V
- Collector Current: 0.05A
- Power Dissipation (Ptot): 500mW
- Collector Dissipation: 0.4W
- DC Current Gain (hfe): 130
- Collector Current-Max (IC): 0.0500 A
- Current-Gain-Bandwidth (ftotal): 220MHz
- Noise Figure: 6dB
- Operating and Storage Junction Temperature Range: -55 to +15°C
- Package: TO-92
SKU: 0876 -
-
Motor and Gears, Robotics & Machines
3V-6V DC 12x20mm 1220 Miniature Vibration Motor Micro Vibrator
The brand new 1220 micro motor has a brass vibration head. The applicable voltage is DC3V-DC6V. The vibration power is good. The motors are all affixed with noise-reducing sponges and original plastic disks. The brush and commutator are of very good quality.
SKU: 0688 -
Compatibles for Arduino, Mainboards, Modules and Breakout Boards
Arduino Nano V3 Pre-Soldered Pins with USB Cable
Compatibles for Arduino, Mainboards, Modules and Breakout BoardsArduino Nano V3 Pre-Soldered Pins with USB Cable
The Arduino Nano v3 available at electrobes in pakistan is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.0). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.
SKU: 0101 -
Arduino Tools & Kits, Compatibles for Arduino, Modules and Breakout Boards
Arduino UNO Rev3 USB 2.0 Cable Type A/B
Arduino Tools & Kits, Compatibles for Arduino, Modules and Breakout BoardsArduino UNO Rev3 USB 2.0 Cable Type A/B
- USB Type: Type-A to Type-B
- Weight: 25 gm.
- Length: 30 cm.
- Fully compatible with the PC.
- Aluminum under-mold shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference
SKU: 0722 -
Compatibles for Arduino, Mainboards, Modules and Breakout Boards
Arduino UNO R3 SMD Variant Improved Version
-32%
Compatibles for Arduino, Mainboards, Modules and Breakout BoardsArduino UNO R3 SMD Variant Improved Version
The Arduino Uno R3 Compatible Board is a microcontroller board which is based on the ATmega328. Arduino Uno has 14 digital input or output pins(where 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It has everything needed to support the microcontroller, you need to simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
SKU: 0119-1 -
Essential tools, Instruments & Tools
Soldering Paste Flux Grease Weak Acid SMD
Solder flux is a must have when performing any kind of solder rework. The flux is the substance that prevents beading of the solder and helps the solder flow cleanly onto the parts you are soldering. However, flux is mildly corrosive over long lengths of time (months).
SKU: 0785 -
-
Discrete Electronic Components, General ICs, ICs
74LS37 7437 Quad 2-Input SN7437 NAND IC
- Logic IC Type: NAND GATE
- Load Capacitance (CL): 45.0 pF
- Operating Temperature-Min: 0.0 Cel
- Operating Temperature-Max: 70.0 Cel
- Power Supplies (V): 5
- Power Supply Current-Max (ICC): 54.0 mA
- Propagation Delay (tpd): 15.0 ns
- Schmitt Trigger: NO
- Supply Voltage-Nom (Vsup): 5
- Supply Voltage-Min (Vsup): 4.75 V
- Supply Voltage-Max (Vsup): 5.25 V
SKU: 0541 -
Discrete Electronic Components, General ICs, ICs
74LS17 7417 HEX Buffer HD7417 High Voltage Open Collector IC
Discrete Electronic Components, General ICs, ICs74LS17 7417 HEX Buffer HD7417 High Voltage Open Collector IC
- Convert TTL Voltage Levels to MOS Levels
- High Voltage Open Collector
- High Sink-Current Capability Design
- HEX Buffer
- Open-Collector Driver for Indicator Lamps
- Inputs Fully Compatible With Most TTL Circuits
SKU: 0569 -
Discrete Electronic Components, ICs, Logic Gates
74LS11 7411 Triple 3-Input AND Gate IC
- Logic Case Style: DIP
- Logic Type: AND
- No. of Inputs: 3
- No. of Pins: 14
- Operating Temperature Max: 70°C
- Operating Temperature Min: 0°C
- Output Current: 20mA
- Supply Voltage Max: 5.5V
- Supply Voltage Min: 4.5V
SKU: 0568 -
Discrete Electronic Components, General ICs, ICs
74LS05 7405 HEX Inverter SN7405 Open Collector IC
- IC, HEX INVERTER, 74HC05
- Logic Type: Inverter
- Output Current: 5.2mA
- No. of Inputs: 1
- Supply Voltage Min: 2V
- Supply Voltage Max: 6V
- Logic Case Style: DIP
- No. of Pins: 14
- Operating Temperature Min: -40°C
- Operating Temperature Max: 85°C
- Packaging: Each
- Base Number: 74
- IC Generic Number: 74HC05
- Logic Function Number: 7405
- Logic IC Base Number: 7405
- Logic IC Family: HC
- Logic IC Function: Hex Inverters with Open Drain Outputs
- MSL: MSL 1 – Unlimited
- Operating Temperature Range: -40°C to +85°C
- Output Current Max: 4mA
- SVHC: No SVHC (16-Dec-2013)
- Supply Voltage: 5V
- Supply Voltage Range: 2V to 6V
SKU: 0566 -
-
Discrete Electronic Components, ICs, Power Optimizer & Circuit Protection
LM723 Voltage Regulator IC
- Input supply voltage is up to 40v maximum
- Voltage output ranges from 3v to 37v
- Reference voltage is nearly 7v always
- Current from pin Vz is 25mA
- Current from pin Vref is 15mA
- Operating temperature range: -55°C to +150°C
- Line regulation of 0.01%Vout
- Load regulation of 0.03%Vout
- Ripple rejection of 74 dB
SKU: 0548
