Converter
Showing all 32 results
- Converters, Modules and Breakout Boards
XL6009E1 1.3-35V 3A Auto Step Up/Down Buck/Boost DC-DC Converter
Converters, Modules and Breakout BoardsXL6009E1 1.3-35V 3A Auto Step Up/Down Buck/Boost DC-DC Converter
XL6009 module is a non-isolated step-up boost voltage converter featuring adjustable output voltage, high efficiency. It converts input voltage of 5-32V DC to an output voltage of 4-38V DC.
SKU: 1779 - Converters, Modules and Breakout Boards
1200W 20A DC Converter Boost Step-up Power Supply Module in 8-60V Out 12-83V with Heat Sink 12V to 24V 48V
Converters, Modules and Breakout Boards1200W 20A DC Converter Boost Step-up Power Supply Module in 8-60V Out 12-83V with Heat Sink 12V to 24V 48V
- Input voltage :10-60V
- Output voltage: 12-83V (adjustable)
- Output Current: 12A
- Input Current: 20A
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
SKU: 1771 - Converters, Modules and Breakout Boards
LM2596 DC 6V-40V To 5V 3A Double USB Charge DC-DC Step-down Converter Module
-10%
Converters, Modules and Breakout BoardsLM2596 DC 6V-40V To 5V 3A Double USB Charge DC-DC Step-down Converter Module
Dual USB Output LM2596 Buck Converter is a step down module and has a dual 5V output for charging Phone, MP3, MP4, PSP, or powering Arduino, Raspberry Pi, etc. 100% Brand new and high quality! This module has short circuit protection DIY Mobile Power Supply with two 5V output USB ports with 3A output current.
SKU: 1611 - Converters, Modules and Breakout Boards
300W XL4016 DC-DC Max 9A Step Down Buck Converter 5-40V To 1.2-35V Adjustable Power Supply Module LED Driver
Converters, Modules and Breakout Boards300W XL4016 DC-DC Max 9A Step Down Buck Converter 5-40V To 1.2-35V Adjustable Power Supply Module LED Driver
This 300W 9A Buck Converter uses two XLSEMI XL4016 voltage regulators to reduce input voltages from 7 – 40 V to adjustable output voltages between 1 and 35 Volts. The large heat sinks enables high output currents of up to 9A max. and a limiting output of 300W. The second trimmer on the board is used to set up the current limit.
SKU: 1576 - Converters, Modules and Breakout Boards
XL4015 5A DC-DC Voltage Step Down Buck Converter 4-38v Input
The XL4015 power module is a DC to DC step-down (BUCK) power module that operates at a switching frequency of 180kHz. In such high frequency, it provides smaller sized filter components compared with low frequency switching regulators.
SKU: 1327 - Converters, Modules and Breakout Boards
XL6009 DC-DC Step Up Boost Converter 5 – 32V to 5 – 35V 10W (4A)
Converters, Modules and Breakout BoardsXL6009 DC-DC Step Up Boost Converter 5 – 32V to 5 – 35V 10W (4A)
XL6009 module is a non-isolated step-up boost voltage converter featuring adjustable output voltage, high efficiency. It converts input voltage of 5-32V DC to an output voltage of 4-38V DC.
SKU: 1078 - Analog, Discrete Electronic Components, ICs
CD4049 Hex Inverter Buffer IC
CD4049 is a general purpose Hex Inverter Buffer IC. CD4049 holds six inverter gates on a single package. The IC works on the voltage range from 3V to 15V excessive voltage more than 15V will destroy the IC. So provide input voltage in the range of 3V to 15V. The IC invert the binary input i-e if we apply 1 at input it will out 0 and vice versa
SKU: 0886 - Converters, Modules and Breakout Boards
PCF8591 ADC & DAC Analog to Digital and Digital to Analog Converter Module
-19%
Converters, Modules and Breakout BoardsPCF8591 ADC & DAC Analog to Digital and Digital to Analog Converter Module
The PCF8591 is a monolithically integrated, and a separate power supply, low-power, 8-bit CMOS data acquisition devices. The PCF8591 has the four analog inputs, one analog output and a serial I2C bus interface. PCF8591 three address pins A0, A1 and A2 can be used in hardware address programmed 8 PCF8591 device allows access to the same I2C bus, without the need for additional hardware. On the PCF8591 device input and output of the address, control and data signals are transmitted in serial fashion via the two-wire bidirectional I2C bus.
SKU: 0764 - Modules and Breakout Boards
CH340 USB to TTL (Serial) HW 597 Converter Module
A simple USB to serial converter with selectable voltage through a jumper. Specifications:
- 3.3V-5V TTL voltages
- Converts TTL logic levels to computer RS232 levels
- Power supplies: 5V, 3.3V, GND (min)
- RX (3.3V-5V)
- TX (3.3V-5V)
SKU: 0751 - Converters, Modules and Breakout Boards
CP2102 USB 2.0 to TTL UART 6PIN Serial Converter
CP2102 chip from SiLabs is a single chip USB to UART bridge IC. It requires minimal external components. CP2102 can be used to migrate legacy serial port based devices to USB. Hobbyists can use it as a powerful tool to make all kinds of PC interfaced projects. This module help all those who are comfortable with RS232/Serial Communication protocol, to build USB devices very easily.
SKU: 0617 - Converters, Modules and Breakout Boards
LM2596 Tripple / Three Variables Buck Adjustable Step Down Power Supply Module DC-DC Converter
Converters, Modules and Breakout BoardsLM2596 Tripple / Three Variables Buck Adjustable Step Down Power Supply Module DC-DC Converter
- Input voltage: 4-35V
- Output Voltage: 1.5-35V (adjustable)
- Output current: rated current 2A, maximum 3A (heat sink required)
- Conversion efficiency: Up to 92% (the higher the voltage, the higher the efficiency)
- Switching Frequency: 150KHz
- Rectifier: Non-Synchronous Rectification
- Module Properties: Non-isolated step-down module (buck)
- Short circuit protection: current limiting
- Operating temperature: Industrial grade (-40 ℃ to +85 ℃) (output power 10W or less)
- Full load temperature rise: 40 ℃
- Load regulation: ± 0.5%
- Voltage regulation: ± 0.5%
- Dynamic response speed: 5% 200uS
- Output ripple:
- Input 12V Output 5V 3A 60mV (MAX)
- Input 24V Output 12V 3A 120mV (MAX)
SKU: 0721 - Breakout Boards, Modules and Breakout Boards
TSSOP28 SOP28 SMD to DIP28 Adapter Dual PCB
Buy TSSOP28 SOP28 SMD to DIP28 Adapter Dual PCB in Pakistan. This is a PCB for SOP28, TSSOP28, MSOP28, SSOP28 to DIP 28 adapter PCB. One PCB supporting both type of package and changing it to dip package for easy prototype.
SKU: 0577 - Converters, Modules and Breakout Boards
5V to 3.3V DC-DC Step down Converter Module Board AMS1117 3V3
Converters, Modules and Breakout Boards5V to 3.3V DC-DC Step down Converter Module Board AMS1117 3V3
Buy online 5V to 3.3V DC-DC Step down Converter Module Board AMS1117 3V3 in Pakistan. This AMS1117 3.3V Power Supply Module is great for your microcontroller projects and for various electronic prototypes. This is a high-performance module which provides a quick solution for powering your circuit.
SKU: 0745 - Discrete Electronic Components, ICs, Logic Gates
CD4050 CMOS Hex Inverting Buffer and Converter IC
• CD4049UB Inverting
• CD4050B Noninverting
• High Sink Current for Driving 2 TTL Loads
• High-to-Low Level Logic Conversion
• 100% Tested for Quiescent Current at 20 V
• Maximum Input Current of 1 μA at 18 V Over Full
Package Temperature Range; 100 nA at 18 V and
25°C
• 5-V, 10-V, and 15-V ParametricSKU: 0232 - Converters, Modules and Breakout Boards
RS485 to TTL UART Converter Module
RS485 to TTL / TTL to RS485 converter is a module that allows the TTL interface of the microcontroller to be transferred to the RS485 module / MAX485 module. It is generally used for industrial automation. This module adds lightning protection design and anti-jamming design. When we use it in the field and carry out long distance transmission, we can Connect the GND end of the module to the ground so that lightning protection and anti-interference can be achieved. This Max485 to TTL module is online in Pakistan at electrobes.
SKU: 0168 - Converters, Modules and Breakout Boards
LM2596 Buck Adjustable Step Down Power Supply Module DC-DC Converter
Converters, Modules and Breakout BoardsLM2596 Buck Adjustable Step Down Power Supply Module DC-DC Converter
LM2596 DC-DC Buck Converter Step Down Module Power Supply is a step-down buck converter switching regulator. LM2596 Buck is capable of driving a 3-A load with excellent line and load regulation and fixed output voltages of 3.3 V, 5 V, 12 V, and an adjustable output version.
SKU: 0158
