Multifunction Servo Bracket PTZ Robotic Manipulator DIY Robot Mount
This Multifunctinal steering brackets is designed to fit most standard sized servos. This bracket is both lightweight and strong. Various holes are located on the bracket that fit most servo horns.
These brackets are light and strong and the numerous mounting holes enable you to easily make custom mechanisms using standard servo motors. Works great for making multi-axis joints for use in robot arms and legs.
In stock
₨ 200
In stock
Multifunction Servo Motor Bracket Steering Head Mount for MG995 MG996R
Features:
- This product is made of high quality materials and is durable.
- Various sensors can be installed to complete a variety of novel interactive works through the servo controller.
- It is convenient to install the camera, which can realize image monitoring and image recognition and tracking.
- This product is a large rotation, cost-effective small pan/tilt that can perform two-degree-of- motion in horizontal and vertical directions.
- The addition of an infrared sensor or an ultrasonic distance measuring sensor can be combined into an integrated detecting device, so that the robot can sense the surrounding obstacles, thereby realizing the obstacle avoidance function of the robot.
- Name: Multifunctional steering bracket
- Material: 2mm hard aluminum
- Size: 58x 37x 25.5mm
- Weight: 15.5g
- Surfacing: Sandblasting oxidation
- Color: Black
Related products
- Robotics & Machines, Motor and Gears
3V-6V DC 12x20mm 1220 Miniature Vibration Motor Micro Vibrator
The brand new 1220 micro motor has a brass vibration head. The applicable voltage is DC3V-DC6V. The vibration power is good. The motors are all affixed with noise-reducing sponges and original plastic disks. The brush and commutator are of very good quality.
SKU: 0688 - Robotics & Machines, Planes And Copters
1000KV A2212 Brushless DC Motor BLDC Rotor for Quadcopter Drone
Robotics & Machines, Planes And Copters1000KV A2212 Brushless DC Motor BLDC Rotor for Quadcopter Drone
This is a brushless outrunner 1000kv motor specifically made for quadcopters and multirotors. 1000 kv motors are perfect for medium size quadcopters F450 frame with 8 inch to 10 inch propellers.
SKU: 0974 - Modules and Breakout Boards, Robotics & Machines, Stepper Motors & Drivers
L298N H-Bridge Motor Driver Module
Modules and Breakout Boards, Robotics & Machines, Stepper Motors & DriversL298N H-Bridge Motor Driver Module
The L298 motor driver module features:
- Finned Aluminum Heatsink for the L298 IC
- Clamping Rectifiers
- Filter Capacitors for logic-power and moto-power busses
- Onboard 5-Volt DC Regulator (A jumper selects between external 5-Volt power or the onboard 5-volt regulator.)
- Screw Terminal connections for ground, motor power, 5-volt power, and motor outputs
- 0.1 inch-pitch header pins for logic inputs
- Jumpers to tie the enable inputs to ground (if desired)
- Switches up to 2 amps per channel
SKU: 0753
