[vc_row][vc_column]
-
-
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
4S 30A LifePo4 Lithium Iron Phosphate Battery Balanced Charging BMS PCB Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards4S 30A LifePo4 Lithium Iron Phosphate Battery Balanced Charging BMS PCB Board
4S 30A 12.6V Cell 18650 LifePo4 Lithium Iron Phosphate Battery Charging BMS PCB Board with Protection Charging Module battery management system available in Pakistan
SKU: 1843 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
5.8GHZ Microwave Radar Sensor Module XYC-WB-DC Smart Sensoring Switch 6-9M
-9%
General Sensors, Modules and Breakout Boards, Sensors & Transducers5.8GHZ Microwave Radar Sensor Module XYC-WB-DC Smart Sensoring Switch 6-9M
It uses Doppler radar technology, With the ability to automatically sensing to control another product, high sensitivity, sensor distance, reliability, wide-angle sensor, wide voltage range and other characteristics. Widely used in lighting conditions, anti-theft alarm is available online at electrobes-com-827299.hostingersite.com in Pakistan.
SKU: 0133 -
Crystal Oscillators, Discrete Electronic Components
10Mhz Crystal Oscillator
- 18pF of Load Capacitance
- Frequency Tolerance(Ƹf/f) range is ± 30ppm
- Frequency Temperature Stability range is ±50ppm
- Resonance Resistance 40ohms (max)
- Oscillation mode: Fundamental mode
- Shunt Capacitance less than 7pF
- Drive Level less than 100µW
- Operating Temperature Range: -20 to + 70°C
- Operable Temperature Range: -25 to + 85°C
- Storage Temperature Range: -55 to + 125°C
- Insulation Resistance: 500 M ohms
SKU: 0522 -
-
Discrete Electronic Components, Filter & Amplifiers, ICs
LM386 Audio Amplifier IC
- Operating voltage range: +4.75 to +5.25V
- Recommended operating voltage: +5V
- Maximum supply voltage:7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Typical Rise Time: 18ns
- Typical Fall Time: 18ns
- Operating temperature:0°C to 70°C
- Storage Temperature: -65°C to 150°C
SKU: 0421 -
Discrete Electronic Components, General ICs, ICs
LM393 Dual COMPARATOR Low Offset Voltage IC
- Operating voltage range: +4.75 to +5.25V
- Recommended operating voltage: +5V
- Maximum supply voltage:7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Typical Rise Time: 18ns
- Typical Fall Time: 18ns
- Operating temperature:0°C to 70°C
- Storage Temperature: -65°C to 150°C
SKU: 0419 -
Breadboards, Protoboards & PCBs, Discrete Electronic Components
16.3 x 5.3cm MB-102 Breadboard Solderless Prototyping Board
Breadboards, Protoboards & PCBs, Discrete Electronic Components16.3 x 5.3cm MB-102 Breadboard Solderless Prototyping Board
Breadboard Project Board MB102 830Points Solderless Prototype Breadboard Solder-less breadboard is commonly used by students and hobbyists to quickly assemble an electronics project without using soldering station. These Breadboard Project Board MB102 can be connected with one-another to make a larger board for complex projects.
SKU: 0668 -
-
3D Printers, CNC & 3D Printers, DLP/SLA/Resin 3D Printer
ELEGOO Jupiter SE 12.8-inch 6K Monochrome LCD Resin 3D Printer
3D Printers, CNC & 3D Printers, DLP/SLA/Resin 3D PrinterELEGOO Jupiter SE 12.8-inch 6K Monochrome LCD Resin 3D Printer
- 12.8-Inch 6K Mono LCD, 51um XY resolution
- Build volume of 277.848 x 156.264 x 300 mm³
- Automatic resin feeding and recycling
- With a 4-point leveling system
- Upgraded USB Air Purifier
SKU: TDP-068 -
-
Batteries & Chargers, Rechargeable
3.2V 4000mAh Rechargeable LifePo4 IFR26700 5C Battery Cell – New
We are providing this 4000mAh Lithium Phosphate LifePo4 Rechargeable 26700 Cell at the best price in the market for our customers. These are powerful cells with higher number of life cycles and charging capacity compared to other cells available online in Pakistan.
SKU: 1822 -
EV Parts
EV Electric Bike Full Wiring Harness Complete Wiring Kit for Brushless Motor
Electric Scooter wire harness for DC Brushless Motor Electric Bike wiring for Brushless Hub Motor Electric Bicycle Parts E-bike Controller EV Accessories Parts. The battery type can be Lithium battery, Lead Acid battery etc.
SKU: EB-43 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 7S 24V 50A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 7S 24V 50A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS Li-ion 7S 24V 50A BMS Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-021 -
-
Modules and Breakout Boards, Wireless Communication
ESP32-CAM WiFi Bluetooth Camera Module Development Board ESP32 with Camera Module OV2640 2MP
Modules and Breakout Boards, Wireless CommunicationESP32-CAM WiFi Bluetooth Camera Module Development Board ESP32 with Camera Module OV2640 2MP
- Onboard ESP32-S module, supports WiFi + BT
- OV2640 camera with flash
- Onboard TF card slot, supports up to 4G TF card for data storage
- Supports WiFi video monitoring and WiFi image upload
- Supports multi sleep modes, deep sleep current as low as 6mA
- Control interface is accessible via pinheader, easy to be integrated and embedded into user products
SKU: 1533 -
-
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS LFP LifePo4 4S 12V 20A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS LFP LifePo4 4S 12V 20A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
DALY BMS 4S 12V LifePO4 PCB Protection Board with Balance Wire and Temperature Sensor for 4 3.2V Cells 12V LiFePO4 Lithium Battery Pack with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-042 -
Discrete Electronic Components, General ICs, ICs
74LS05 7405 HEX Inverter SN7405 Open Collector IC
- IC, HEX INVERTER, 74HC05
- Logic Type: Inverter
- Output Current: 5.2mA
- No. of Inputs: 1
- Supply Voltage Min: 2V
- Supply Voltage Max: 6V
- Logic Case Style: DIP
- No. of Pins: 14
- Operating Temperature Min: -40°C
- Operating Temperature Max: 85°C
- Packaging: Each
- Base Number: 74
- IC Generic Number: 74HC05
- Logic Function Number: 7405
- Logic IC Base Number: 7405
- Logic IC Family: HC
- Logic IC Function: Hex Inverters with Open Drain Outputs
- MSL: MSL 1 – Unlimited
- Operating Temperature Range: -40°C to +85°C
- Output Current Max: 4mA
- SVHC: No SVHC (16-Dec-2013)
- Supply Voltage: 5V
- Supply Voltage Range: 2V to 6V
SKU: 0566 -
Hardware, Instruments & Tools
JAKEMY JM-8117 37 in 1 Multifunctional mini Professional kit precision Repair tool Household Electronics DIY Screwdriver tools
Hardware, Instruments & ToolsJAKEMY JM-8117 37 in 1 Multifunctional mini Professional kit precision Repair tool Household Electronics DIY Screwdriver tools
Original JAKEMY JM-8117 37 in 1 Multifunctional mini Professional kit precision Repair tool Household Electronics DIY Screwdriver tools set in Pakistan
SKU: 1113 -
Compatibles for Arduino, Mainboards, Modules and Breakout Boards
LilyPad Arduino 328 Main Board (ATmega328P Processor)
Compatibles for Arduino, Mainboards, Modules and Breakout BoardsLilyPad Arduino 328 Main Board (ATmega328P Processor)
The LilyPad Arduino 328 Main Board is an Arduino-programmed microcontroller designed to be easily integrated into e-textiles and wearable projects. The LilyPad Arduino consists of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible.
SKU: 0647 -
-
CCTV and IP Cameras
Dual Camera Wireless security camera – 2mp – V380 Pro
1. Remote viewing through the free App on your smart Phone
2. The alert will be pushed to your phone if any motion is detected
3. Amazing night vision, You could switch between B/W & color mode even in the night!
4. 360°Pan/Tilt Camera, with the 1080P high resolution, we can enjoy the panoramic viewing no blind angle
5. Two Way Audio, talk back with people near the cameras whether you’re in the backyard or halfway around the world
SKU: CAM-017 -
Essential tools, Instruments & Tools
SR-04 Ultrasonic Sensor Mounting Bracket Colored
- Thickness: 2.8 – 3.1 mm
- Inner diameter: 16 mm
- Fixing Hole Diameter: 3.8 mm
- Material: High Quality Imported Acrylic
- Colour: Blue
- Application: Stationary ultrasonic sensor modules and other products
Package Contents:
1 x Ultrasonic Mount Bracket for HC-SR04 Ultrasonic Module
SKU: 0131 -
Modules and Breakout Boards, Sensors & Transducers, Temperature Sensor
DS18B20 Temperature Sensor Waterproof Digital Thermal Probe Temp Sensor – 1M Lead Length
-3%
Modules and Breakout Boards, Sensors & Transducers, Temperature SensorDS18B20 Temperature Sensor Waterproof Digital Thermal Probe Temp Sensor – 1M Lead Length
- Sensors For Arduino DS18b20 Temperature Sensor Module
- Product Type : Temperature sensor Module
- Voltage range : 3.5 – 5V DC
- Length : 100 cm.
SKU: 1164 -
Breadboards, Protoboards & PCBs, Discrete Electronic Components
12 x 4.5 inch Copper Clad FR4 Fiber Glass Printed Circuit Board PCB Sheet
Breadboards, Protoboards & PCBs, Discrete Electronic Components12 x 4.5 inch Copper Clad FR4 Fiber Glass Printed Circuit Board PCB Sheet
12 x 4.5 inch Copper Clad FR4 Fiber Glass Printed Circuit Board PCB Board with Copper Thickness 2oz, Total PCB thickness 16mm & Tolerance 10% Single Sided. This board is Ink resistant. Suitable etchants Ferric Chloride or Fine Etch crystals. Buy online in Pakistan at Electrobes.
SKU: 0925-3 -
Instruments & Tools, Meters
UNI-T UDP6720 DC Power Supply, 60V 5A 100W Voltage Current Regulator, Stabilizer Switching Power Supply, AC 220V 110V Input
Instruments & Tools, MetersUNI-T UDP6720 DC Power Supply, 60V 5A 100W Voltage Current Regulator, Stabilizer Switching Power Supply, AC 220V 110V Input
- TYPE: Programmable Switching DC power supply
- Channels: 1
- TOTAL POWER :100W
- OUTPUT VOLTAGE: 0~60V
- OUTPUT CURRENT: 0~5A
- RESOLUTION: 10mV,1mA
- SETTING ACCURACY: <0.05%+10mV <0.2%+2mA
- Connectivity: RS-232
SKU: DM-029 -
Compatibles for Arduino, Mainboards, Modules and Breakout Boards
Arduino UNO R3 Starter Learning Kit for Beginners
Compatibles for Arduino, Mainboards, Modules and Breakout BoardsArduino UNO R3 Starter Learning Kit for Beginners
The best place to start with coding, electronics, is with an Arduino Starter Kit. This Kit is the ideal introduction to the field of electronics since it includes all the necessary parts in one convenient package. Due to the fact that all of the hardware and software in Arduino Kit is open source, even those without any prior knowledge of electronics or programming may use them.
SKU: 1723 -
Discrete Electronic Components, ICs, Logic Gates
74LS10 Tripple 3 input NAND Gate IC
- Operating voltage range: +4.75 to +5.25V
- Recommended operating voltage: +5V
- Maximum supply voltage:7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Typical Rise Time: 18ns
- Typical Fall Time: 18ns
- Operating temperature:0°C to 70°C
- Storage Temperature: -65°C to 150°C
SKU: 0407 -
Essential tools, Instruments & Tools
JAKEMY JM-T1-11 Professional Long Pointed Tip Tweezers
Jakemy JM-T1-11 professional extra strength tweezers the head section adopts a special processing process, which can maintain good work performance It is widely used in electronic care, chemical industry, assembly, beauty, gardening, etc.
SKU: 1351 -
Discrete Electronic Components, General Electronics
Universal IR Infrared Receiver TSOP1838 38Khz
- RoHS Compliant
- Beam Angle: 45 deg
- Carrier Frequency: 38 kHz
- Transmission Distance: 25 m
- Viewing Angle: 45 deg
- High Level Pulse Width: 0.8 ms
- Low Level Pulse Width: 0.8 ms
- Minimum High Level Output Voltage: 100 mV
- Output Current: 5 mA
- Operating Supply Voltage: 2.5 V to 5.5 V
- Supply Current: 700 uA
- Power Dissipation: 10 mW
- Maximum Operating Temperature: + 85 C
- Minimum Operating Temperature: – 25 C
- Package / Case: Side Looker
- Mounting Style: Through Hole
SKU: 0225 -
Automation Gadgets
S919-7 Digital Smart Wooden Door Automatic Lock with RFID, Pin, Key and Biometric Verification System for Home Office Security
Automation GadgetsS919-7 Digital Smart Wooden Door Automatic Lock with RFID, Pin, Key and Biometric Verification System for Home Office Security
- Multiple methods to open
- No Wiring Required
- Easy Clip-on installation, for standard glass doors, no need to drill holes for installation
- Universal Left Open , Right open dual support
- Model S919-7
- Used for Wooden doors upto 55mm thickness
SKU: HA-015 -
-
-
Breadboards, Protoboards & PCBs, Discrete Electronic Components, Modules and Breakout Boards, Voltage, Current & Power
MB102 Breadboard Power Supply Module 3.3V/5V For Arduino Solderless Bread Board
Breadboards, Protoboards & PCBs, Discrete Electronic Components, Modules and Breakout Boards, Voltage, Current & PowerMB102 Breadboard Power Supply Module 3.3V/5V For Arduino Solderless Bread Board
The Breadboard power supply has 3.3V/5V selectable output on two channels. The maximum current can be drawn is 700mA. The selection of the output voltage is independent on each channel and the user can select the output voltage by changing jumpers separately.
SKU: 0649 -
Arduino Shield, Compatibles for Arduino, Modules and Breakout Boards
Prototyping Prototype Shield with Mini Breadboard compatible with Arduino MEGA 2560 R3
Arduino Shield, Compatibles for Arduino, Modules and Breakout BoardsPrototyping Prototype Shield with Mini Breadboard compatible with Arduino MEGA 2560 R3
- EASY TO INSTALL: Due to its compact design, it can be easily installed on the MEGA 2560 and other similar modules
- SEVERAL APPLICATIONS: With the included Mini Breadboard you can easily wire up various projects directly on the microcontroller
- READY TO USE: Thanks to the integrated buttons and LED, the input and output possibilities are simple, no additional parts or wiring are required – ready to work!
SKU: 1692 -
Essential tools, Instruments & Tools
21V Rechargeable Cordless Impact Drill Set Multifunctional Electric Screwdriver Home Portable Lithium Battery Power Tool Kits
Essential tools, Instruments & Tools21V Rechargeable Cordless Impact Drill Set Multifunctional Electric Screwdriver Home Portable Lithium Battery Power Tool Kits
- Rechargeable drill with 24V battery
- Includes screwdrivers & pliers
- Drill bits & screw bits set
- Measuring tape & PVC tape
- Versatile tool selection
- Ideal for home & professional use
- Compact & portable design
SKU: 1886 -
Batteries & Chargers, Rechargeable
3.7V 1500mAh Rechargeable 18650 Li-Ion Battery Cell – New
We are providing this 1500mAh Li-Ion Rechargeable Li-ion 18650 Cell at the best price in the market for our customers These are powerful cells with higher number of life cycles and charging capacity compared to other cells available online in Pakistan. These batteries are available in different power rating at electrobes. We also have battery packs of 1s-14s lithium ion battery storage.
SKU: 0941 -
-
3D Printers, CNC & 3D Printers
Anycubic Kobra 3 Max Combo 3D Printer, Multi-Color 3D Printer 4 Colors High Speed 3D Printer
3D Printers, CNC & 3D PrintersAnycubic Kobra 3 Max Combo 3D Printer, Multi-Color 3D Printer 4 Colors High Speed 3D Printer
● The Largest Consumer-Grade Multicolor 3D Printer
● 420*420*500mm Print Volume
● Latest ACE PRO Flawless 8-Color Printing
● Precise Auto-Leveling & Anti-Step Lost
● Filament Box with Drying Capability
● 600mm/s High-Speed Printing
● Anycubic Slicer Next & Anycubic App UpgradeSKU: TDP-071 -
Batteries Connectors, Connectors, Discrete Electronic Components
3.7V 3×5 (15) 18650 Battery Holder Plastic Bracket Mount
Batteries Connectors, Connectors, Discrete Electronic Components3.7V 3×5 (15) 18650 Battery Holder Plastic Bracket Mount
18650 Lithium Battery Cell Holder 3×5 Cell Spacer Bracket Stand Battery Storage Box Protection Board Cylindrical Battery Pack Safety Anti Vibration Plastic Case Box for DIY Fixed 18650 Battery
SKU: 1184 -
3D Printers, CNC & 3D Printers, FDM 3D Printers
CREALITY Ender-3 V2 NEO FDM 3D Printer compatible with 220x220x250mm Printing Volume
3D Printers, CNC & 3D Printers, FDM 3D PrintersCREALITY Ender-3 V2 NEO FDM 3D Printer compatible with 220x220x250mm Printing Volume
Official Creality Ender 3 V2 Neo 3D Printer Ender 3 V2 Upgraded with CR Touch Auto-Leveling Full-Metal Bowden Extruder Stable Integrated Design 3-Step Assembly PC Spring Steel Magnetic Build Plate
SKU: TDP-003 -
Crystal Oscillators, Discrete Electronic Components
8Mhz Crystal Oscillator
- 18pF of Load Capacitance
- Frequency Tolerance(Ƹf/f) range is ± 30ppm
- Frequency Temperature Stability range is ±50ppm
- Resonance Resistance 40ohms (max)
- Oscillation mode: Fundamental mode
- Shunt Capacitance less than 7pF
- Drive Level less than 100µW
- Operating Temperature Range: -20 to + 70°C
- Operable Temperature Range: -25 to + 85°C
- Storage Temperature Range: -55 to + 125°C
- Insulation Resistance: 500 M ohms
SKU: 0521 -
-
DIP Transistors, Discrete Electronic Components, Transistors
BT139 600E Triac Switching Transistor
- Direct triggering from low power drivers and logic ICs
- High blocking voltage capability
- Planar passivated for voltage ruggedness and reliability
- Sensitive gate
- Triggering in all four quadrants
SKU: 0237 -
-
General Electronic Boards, Modules and Breakout Boards
1203B 3A PWM DC Motor Speed Controller Module
Operating instruction:
Before you attempt to wire the controller, make sure power is off.
WARNING: DO NOT REVERSE POSITIVE AND NEGATIVE POWER LOADS. THIS WILL DAMAGE THE CONTROLLER.
TO CHANGE MOTOR DIRECTION, INTERCHANGE THE POSITIVE AND NEGATIVE WIRES OF MOTOR.
1. Connect wires refer to the “wiring diagram”.
2. Turn on the power, and adjust the potentiometer.
3. The LED indicates the power up and the speed of a motor.
SKU: 1627 -
Converters, Modules and Breakout Boards
RS485 to TTL UART Converter Module
RS485 to TTL / TTL to RS485 converter is a module that allows the TTL interface of the microcontroller to be transferred to the RS485 module / MAX485 module. It is generally used for industrial automation. This module adds lightning protection design and anti-jamming design. When we use it in the field and carry out long distance transmission, we can Connect the GND end of the module to the ground so that lightning protection and anti-interference can be achieved. This Max485 to TTL module is online in Pakistan at electrobes.
SKU: 0168 -
Buttons, Switches & Pads, Connectivity, General Sensors, Modules and Breakout Boards, Sensors & Transducers
Liquid Float Switch Water Float Sensor
Buttons, Switches & Pads, Connectivity, General Sensors, Modules and Breakout Boards, Sensors & TransducersLiquid Float Switch Water Float Sensor
Use them with hydroponics, saltwater tank, freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating, pumps, ponds, basement alarms, boats, air condition drain pans, pressure washers, carpet cleaning mach, reef aquarium, fluid control, ice machines, coffee pots, marine, automotive, automobiles, tropical fish tanks, evaporator coils, condensation line, in relays etc., It can be easily converted from open to close by inverting the float.
SKU: 0472 -
Motor and Gears, Robotics & Machines
12V 740 RPM High Torque High Speed DC Gear Motor
GB37R-395 geared motor has a small reduction ratio of only 1:10 and an output speed of 740 rpm. It is not easy to make a speed reducer with such a small reduction ratio. Their gear motors quality and accuracy is very good, and the sound is quiet during operation.
SKU: 1765 -
Discrete Electronic Components, Light Dependent Resistors, Resistors
Large Size LDR Light Dependent Resistor
Discrete Electronic Components, Light Dependent Resistors, ResistorsLarge Size LDR Light Dependent Resistor
- Package: RADIAL 5mm
- Wave Length/Frequency: 650nm
- Product Type: Photo Conductive Cell
- Light resistance: 10-20K Ohm
- Dark resistance:1-20M ohm
- Max voltage: 150V
- Max power: 100mW
- Maximum Operating Temperature : +800C (Approx.)
SKU: Z-1461 -
3D Printer Parts, CNC & 3D Printers, CNC Machine Parts
2060 V-Slot Aluminum Profile Extrusion for 3D Printer & CNC Machine
3D Printer Parts, CNC & 3D Printers, CNC Machine Parts2060 V-Slot Aluminum Profile Extrusion for 3D Printer & CNC Machine
- Black surface treatment, beautiful and durable.
- V slot aluminium profile can work as same as T slot aluminium profile, all T slot accessories (such as T nuts) can fit V slot aluminium profile.
- V slot aluminium profile support linear motion, you can build such as 3d printer and so on.
- V slot aluminium profile extrusions are perfect for custom machine frames, workstations, prototyping, guarding and many more purposes.
SKU: CNC-215 -
Adapters, Batteries & Chargers
Imax B3 Pro Lipo Battery Balance Compact Charger 2S-3S Lithium Polymer Adapter
Adapters, Batteries & ChargersImax B3 Pro Lipo Battery Balance Compact Charger 2S-3S Lithium Polymer Adapter
A new design of easy compact balance charger for 2 and 3 cells LiPo battery fast charging with wide AC input.
An internal 100-240V AC switch power is built in, and the high precision balance circuit can supply larger current up to 850mA per cell. Double color LED can display the process of charging (RED: charging; GREEN: full).SKU: 0989 -
Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & Power
ACS712 30A 30 Amp Current Sensor Module
Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & PowerACS712 30A 30 Amp Current Sensor Module
The ACS712 Module uses the famous ACS712 IC to measure current using the Hall Effect principle. The module gets its name from the IC (ACS712) used in the module, so for you final products use the IC directly instead of the module.
SKU: 0757 -
3D Printers, CNC & 3D Printers, DLP/SLA/Resin 3D Printer
ANYCUBIC Photon Mono M7 Max Resin 3D Printer
3D Printers, CNC & 3D Printers, DLP/SLA/Resin 3D PrinterANYCUBIC Photon Mono M7 Max Resin 3D Printer
ANYCUBIC Photon Mono M7 MAX Resin 3D Printer, 13.6’’ 7K Large Resin Printer with COB LighTurbo 3.0, Flip-Open Cover Design, Intelligent-Assist Printing, Print Size 11.8” x 11.7” x 6.5” resin SLA 3d printer available in Pakistan
SKU: TDP-067 -
Audio & Sound, Audio & Visual, General Electronic Boards, Modules and Breakout Boards
PAM8610 12V Dual Channel Stereo Audio Amplifier Board
Audio & Sound, Audio & Visual, General Electronic Boards, Modules and Breakout BoardsPAM8610 12V Dual Channel Stereo Audio Amplifier Board
PAM 8610 is a class D audio Amplifier. It offers low THD N, allowing it to achieve high quality sound reproduction. The new filter less architecture allows the device to drive the speaker directly, requiring no low pass output filter, thus to save the system cost and PCB area. with the same numbers of external components. the efficiency of PAM8610 is much better than that of class AB. It can extend the battery life.
SKU: 1424 -
-
Connectivity, Connectors, Discrete Electronic Components, Wires, Cables & Connectors
5V USB Charger power Cable to DC 5.5 mm plug / jack USB Power Cable
Connectivity, Connectors, Discrete Electronic Components, Wires, Cables & Connectors5V USB Charger power Cable to DC 5.5 mm plug / jack USB Power Cable
- Interface: USB to DC5.5*2.1MM. Internal and external negative
- Operating environment: temperature 0 ° C -40 ° C, humidity 10% -90%
- Storage environment: temperature below 20%-90 °C, humidity 10%-90%, altitude less than 3000 meters
- Power the other devices of the same interface through the USB port of the computer, such as: USB HUB,
- USB, USB fan, cartoon clock, radiator, 5V mini speaker, mobile power MP4MP5, etc.
SKU: 1593 -
Analog, Discrete Electronic Components, ICs
CD4033 CMOS Decade Counter Divider IC
- Logic Family / Base Number: CD4033
- Counter Type: Decade / Divider
- Clock Frequency: 16MHz
- Count Maximum: 10 Logic
- Case Style: DIP
No. of Pins: 16Pins - Supply Voltage Min: 3V
- Supply Voltage Max: 18V
- Logic IC Family: CD4000
- Logic IC Base Number: 4033
- Operating Temperature Min: -55°C
- Operating Temperature Max: 125°C
- Product Range: CD4000 LOGIC Series
SKU: 0411 -
Educational & DIYs
12V Cabinet Drawer Electric Solenoid Door Lock 54x28x39mm
To drive a solenoid lock with an Arduino you will need a relay module fairly good power supply, as a lot of current will rush into the solenoid to charge up the electro-magnet, about 1000mA, so don’t try to power it with a 9V battery!
SKU: SV-021 -
Discrete Electronic Components, Filter & Amplifiers, ICs
LM741 UA741 Operational Amplifier Op-amp IC
- LM741 has only one op-amp inside, there are some op-amp IC’s having more than one op-amp like LM358, LM148, LM248, LM348
- Provided with short circuit and overload protection.
- Low power consumption.
- Large common mode rejection ratio (CMRR) and differential voltage ranges.
- No external frequency compensation is required.
- Prevent from latch-up when common-mode range is exceeded.
- Minimum, normal and maximum Power Consumption for this IC is ±10v, ±15v and ±22v respectively.
- Operating temperature should be -50 to 125 ˚C.
- Supply current – 1.7 to 2.8mA.
- Soldering pin temperature – PDIP package – 260 ˚C (for 10 seconds – prescribed)
- TO-99 and CDIP – 300 ˚C (for 10 seconds – prescribed)
- Available packages: TO-99, CDIP & PDIP
SKU: 0423 -
Consumer Electronics, Educational & DIYs, Tools & Accessories
PBC1 Power Bank Housing with PCB and 2x 18650 Cells Compartment
Consumer Electronics, Educational & DIYs, Tools & AccessoriesPBC1 Power Bank Housing with PCB and 2x 18650 Cells Compartment
DIY Power bank housing shell with Digital LCD display PCB and night high intensity LED torch, 1 USB port, 1 Led backup status, Charge and discharge protection, Built-in lithium battery protection IC on the circuit board, over and under voltage protection and over current protection.
SKU: 1758 -
Connectors, Discrete Electronic Components, Row Headers
2.54mm 40 x 2 Female Row double Headers
- 80 pins
- 80 positions
- 3 AMP
- Breakaway
- 2.54 mm spacing
- 0.1 inch spacing
- Total pin length 11.5 mm
- Total pin length 0.453 inch
- Connector Mating pin length 6 mm
- Connector Mating pin length 0.236 inch
- PCB mating 3.mm
- PCB mating 0.118 inch
- Gold flash pins
- Double Row
- Ideal for Arduino
- Through Hole
SKU: 0582 -
Instruments & Tools, Meters
UNI-T UT207B Digital Clamp Meter AC Current Ammeter Multimeter
UNI-T Digital Clamp Meter UT207B Inrush Current AC/DC 1000A True RMS HVAC Volt Amp Ohm Meter Clamp On Multimeter Auto Ranging 6000 Counts, Frequency AC DC Voltage LPF ACV Capacitance Duty Cycle Tester at best price in Pakistan
SKU: DM-006 -
-
Arduino Shield, Compatibles for Arduino, Modules and Breakout Boards
USB Host Shield Rev 2.0 for Arduino
Arduino Shield, Compatibles for Arduino, Modules and Breakout BoardsUSB Host Shield Rev 2.0 for Arduino
- Version: 1.0
- Compatible Mainboard
- Leaf maple
- Arduino Deumlanove/UNO
- Arduino MEGA
- ChipKit MAX32
- ChipKit UNO32
- FEZ Panda II
- Freeduino
- Iteadmaple
- Iteaduino
- Iteaduino ADK
- Iteaduino BT
- Iteaduino MEGA 2560
- Simple Cortex
- Seeeduino
- Seeduino MEGA
- Functions: Adapter
- Operation Level: Digital 3.3V, 5V
SKU: 0104 -
-
Consumer Electronics, Educational & DIYs, Tools & Accessories
PBC159 Power Bank Housing with BMS, Digital Display, LED Torch, Battery Capacity Indication for 6x 18650 Batteries
Consumer Electronics, Educational & DIYs, Tools & AccessoriesPBC159 Power Bank Housing with BMS, Digital Display, LED Torch, Battery Capacity Indication for 6x 18650 Batteries
DIY Power bank housing shell with Digital LCD display PCB and night high intensity LED torch compartment for six cell to achieve more capacity, ever wonder to make your own high quality power bank instead purchasing from market low level fake capacities power bank, we have this power bank housing with intelligent PCB to charge battery with buck converter and boost converter to recharge your mobile phone with 2 USB ports and Digital LCD display backup status.
SKU: 1435 -
Crystal Oscillators, Discrete Electronic Components
32.768KHz Crystal Oscillator
- 18pF of Load Capacitance
- Frequency Tolerance(Ƹf/f) range is ± 30ppm
- Frequency Temperature Stability range is ±50ppm
- Resonance Resistance 40ohms (max)
- Oscillation mode: Fundamental mode
- Shunt Capacitance less than 7pF
- Drive Level less than 100µW
- Operating Temperature Range: -20 to + 70°C
- Operable Temperature Range: -25 to + 85°C
- Storage Temperature Range: -55 to + 125°C
- Insulation Resistance: 500 M ohms
SKU: 0520 -
-
General Sensors, Modules and Breakout Boards, Sensors & Transducers
RCWL-0516 Doppler Radar Microwave Sensor Module Human Induction Detector Switch
General Sensors, Modules and Breakout Boards, Sensors & TransducersRCWL-0516 Doppler Radar Microwave Sensor Module Human Induction Detector Switch
This mini doppler radar sensor module is equipped with supporting DC 4-28V wide voltage This is a mini radar motion sensor module is equipped with RCWL-9196 chip based on the doppler microwave induction technology. It will automatically comtinuously output the high level TTL signel when there is motion. 360 degree no blind angle detection and maximum 7m sensoring distance with adjustable delay time and sensitivity. It is perfect for DIY microwave motion sensor light switch, human sensor toys, smart security devices, etc.
SKU: 0761 -
Automation Gadgets
S802 Pro Intelligent Door Lock with Doorbell HD Video Intercom, RFID, Pin, Key and Biometric Verification System
-9%
Automation GadgetsS802 Pro Intelligent Door Lock with Doorbell HD Video Intercom, RFID, Pin, Key and Biometric Verification System
- With HD Video intercom feature
- 5 methods to open the lock
- No Wiring Required
- Model S802 Pro
- Used for doors upto 38-100mm Thickness
- Elegant handle design with tempered glass
- Heavy duty lock
SKU: HA-013 -
-
3D Printer Parts, CNC & 3D Printers
MK8/9 Dual Extruder Feed Device Part For 3D Printer 1.75mm Filament – 1( Right Side)
-6%
3D Printer Parts, CNC & 3D PrintersMK8/9 Dual Extruder Feed Device Part For 3D Printer 1.75mm Filament – 1( Right Side)
Buy online MK8/9 Dual Extruder Feed Device Part For 3D Printer 1.75mm Filament – 1( Right Side) in Pakistan. Electrobes has quality products for 3D printers & CNC machines, ABS, PLA.
SKU: CNC-068 -
-
3D Printers, CNC & 3D Printers, FDM 3D Printers
Elegoo Neptune 3 Pro FDM 3D Printer Dual-Gear Direct Extruder 225x225x280 Bed Size
3D Printers, CNC & 3D Printers, FDM 3D PrintersElegoo Neptune 3 Pro FDM 3D Printer Dual-Gear Direct Extruder 225x225x280 Bed Size
Elegoo Neptune 3 Pro FDM 3D Printer with 32-bit Silent Motherboard, Auto bed leveling, Dual-Gear Direct Extruder, 225x225x280 Larger Bed Volume 3D Printing Machine at best price online in Pakistan
SKU: TDP-006 -
Planes And Copters, Robotics & Machines
FlySky FS-T6 6 Channel 2.4 GHz Digital Radio Remote Control Transmitter & Receiver for RC Quadcopter
Planes And Copters, Robotics & MachinesFlySky FS-T6 6 Channel 2.4 GHz Digital Radio Remote Control Transmitter & Receiver for RC Quadcopter
The 6-channel FlySky FS-T6 is the perfect transmitter for sports modellers who want the power of a programmable transmitter but don’t necessarily need a lot of excess features they do not use. It includes all of the important features and programmable parameters to support a variety of helicopters, gliders, and aeroplanes. It even has the ability to store 20 models allowing the user to save a whole fleet of aircrafts.
SKU: RC-003 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 13S 48V 30A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 13S 48V 30A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS Li-ion 13S 48V 30A BMS Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-009 -
3D Printers, CNC & 3D Printers
Artillery Genius Pro FDM 3d Printer Titan Direct Drive Type 220x220x250mm Build Volume 0.1-0.35mm Resolution Ultra-quiet Stepper Motor 250mm/s TFT
3D Printers, CNC & 3D PrintersArtillery Genius Pro FDM 3d Printer Titan Direct Drive Type 220x220x250mm Build Volume 0.1-0.35mm Resolution Ultra-quiet Stepper Motor 250mm/s TFT
Features & Advantages
- 220 x 220 x 250 mm build space
- Titan extruder & modular nozzle set
- 32-bit motherboard upgrade
- Automatic bed levelling
SKU: TDP-009 -
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry Pis
Heat Sink Copper Heatsink Radiator Cooling Kit Cooler For Raspberry Pi 4 Model B
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry PisHeat Sink Copper Heatsink Radiator Cooling Kit Cooler For Raspberry Pi 4 Model B
A complete set of heats sinks for Rapsberry pi, which provide coolant facility to Raspberry Pi. It is made of Pure Copper for better performance. The fins increase the area of the board and thus provide for greater heat transfer.
SKU: 1491 -
3D Printer Filaments, CNC & 3D Printers, EXYZ Filaments
EXYZ PLA 1.75mm 3D Printer Filament 1kg/Roll
EXYZ PLA Filament 1.75mm, Hi-Speed PLA 3D Printer Filament, Dimensional Accuracy 1.75mm, 1kg(2.2lbs) Cardboard Spool 3D Printing Filament Fits for Most FDM 3D Printers. This High quality PLA Filament available at electrobes has weight of 1Kg.
SKU: PF-026 -
Arduino Shield, Audio & Visual, Compatibles for Arduino, LCD & Display, Modules and Breakout Boards
1602 16×2 LCD Keypad Shield For Arduino
Arduino Shield, Audio & Visual, Compatibles for Arduino, LCD & Display, Modules and Breakout Boards1602 16×2 LCD Keypad Shield For Arduino
This is a very popular 16×2 LCD Keypad shield for Arduino or Freeduino board. It includes a 2×16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD. Analog Pin 0 is used to read the push buttons.
SKU: 0805 -
3D Printer Parts, CNC & 3D Printers, Discrete Electronic Components, General Electronics
Airbrush Compressor With USB Rechargeable Portable Hair Spray Gun
3D Printer Parts, CNC & 3D Printers, Discrete Electronic Components, General ElectronicsAirbrush Compressor With USB Rechargeable Portable Hair Spray Gun
Airbrush Kit Air Brush Mini Airbrush With Compressor USB Rechargeable Portable Hair Spray Gun For Make Up Nail Art Cake Paint, 3D printed parts painting etc. All related 3D printing parts are available in our stock.
SKU: 1876 -
Instruments & Tools, Meters
UNI-T UT33A+ Palm Size Digital Multimeter DMM
The new generation UT33+ series redefines the performance standards for entry-level digital multimeters. Our innovative industrial design ensures that these products can withstand 2 meters drop. The new LCD display layout provides a better user experience. This series ensures that users can work safely in CAT II 600V environment. Special features are, 2mF capacitance test (UT33A+); battery test (UT33B+); temperature measurement function (UT33C+); non-contact voltage (NCV) test (UT33D+).
SKU: DM-002 -
Adapters, Batteries & Chargers
12V 5A 60W Switching Power Supply Driver
12V power supplies (or 12VDC power supplies) are one of the most common power supplies in use today. In general, a 12VDC output is obtained from a 110VAC or 220VAC input using a combination of transformers, diodes and transistors.
SKU: CNC-184 -
Discrete Electronic Components, General ICs, ICs
555 Timer IC
- Typical operating voltage is +5V, can withstand a maximum of +18V.
- The source/sink current of the output pin is 200mA
- Consumes up to 3mA when operating at +5V
- Trigger Voltage is 1.67 when operating at +5V
- Operating Temperature is 70 degree Celsius.
- Available in 8-pin PDIP, SOIC, and VSSOP packages
SKU: 0250 -
Motor and Gears, Robotics & Machines
JGB37-550 DC 12V 680RPM High Torque Metal Gear DC Motor
DC 12V 680 RPM High Speed Large Torque Motor has stable and reliable performance. It is very easy to disassemble, clean and maintain. Highlighted feature of this module is excellent quality and long service life. It is micro, compact and light weight. This motor is high-speed and high-power, and is generally powered by a lithium battery. This DC motor can save electricity to a great extend. Environmental protection is the another inevitable feature of this DC motor. The sound at DC 12V is relatively loud, because the motor itself has a fan, coupled with high speed, the motor’s own no-load current is 1.25 A, so the noise is reasonable, but the torque of this motor is very strong. At the same speed, its torque should be more than twice that of the ordinary 555 geared motor.
SKU: 1198 -
3D Printer Parts, CNC & 3D Printers
U604ZZ Toothless Idler Pulley U-Groove Guide Wheel for CNC & 3D Printer
-10%
3D Printer Parts, CNC & 3D PrintersU604ZZ Toothless Idler Pulley U-Groove Guide Wheel for CNC & 3D Printer
- U-groove Guide Wheel For 3D Printer Extruder.
- Full bearing steel grinding for 3D printer extruder guide wheel.
- High precision, Carrying smooth, Low noise.
- Material: Chrome Steel.
- 100% Brand new.
SKU: CNC-111 -
3D Printers, CNC & 3D Printers, FDM 3D Printers
Bambu Lab A1 Mini Multi-Color Printing FDM 3D Printer
3D Printers, CNC & 3D Printers, FDM 3D PrintersBambu Lab A1 Mini Multi-Color Printing FDM 3D Printer
- Works right out of the box, set up in 15 minutes
- Well-polished hardware and software
- Enclosed-body for high-temperature filament printing
- Up to 16-color printing with AMS
- Up to 20000 mm/s² acceleration, prints a benchy in 18min
- Build-in camera for remote monitoring and timelapse
SKU: TDP-052 -
Modules and Breakout Boards, Wireless Communication
MiFare 13.56MHz Classic Blank RFID Card
Could be modified many times. Lightweight and portable to carry. Convenient to use. Replacement card of your old one. UID cards have 16 Sectors and 4 Blocks each Sector. Organized in 16 sector with 4 blocks of 16 bytes each(one block include 16 bytes) Just program this UID to the UID of lost card then you have a new Exactly the same card.
SKU: 0822 -
Microcontrollers & Programmers, Modules and Breakout Boards
51 AVR Programmer ISP USBASP USB ISP Download Cable
Microcontrollers & Programmers, Modules and Breakout Boards51 AVR Programmer ISP USBASP USB ISP Download Cable
Applicable to WIN 8.1/8/7/XP 32-bit/64-bit system computer.
The product can be directly connected with the computer USB port, the real USB download device, through which to connect the target board the microcontroller can be downloaded programming easy to use, especially for notebook computers, desktop computer, through the USB port programming download debugging.SKU: 1406 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
Tilt Sensor Module SW-520D
Their function is to detect the plane shift from horizontal to vertical and sent of a signal when it happens. There are modules which could sense even small plane shifts but here we are going to discuss about simple contact type TILT SENSOR module. Here we are going to use TILT SENSOR MODULE SW-520D
SKU: 0474 -
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry Pis
Raspberry Pi 4 model B 2GB Computer Development Board
-3%
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry PisRaspberry Pi 4 model B 2GB Computer Development Board
Raspberry Pi 4 has the ability to interact with the outside world & has been used in digital maker projects. Apart from that USB 3, dual HDMI, an upgraded CPU, camera and SD card slot and massive memory would provide much better performance to run applications.
SKU: 0747
