[vc_row][vc_column]
-
Arduino Shield, Compatibles for Arduino, Modules and Breakout Boards
Prototyping Prototype Shield with Mini Breadboard compatible with Arduino MEGA 2560 R3
Arduino Shield, Compatibles for Arduino, Modules and Breakout BoardsPrototyping Prototype Shield with Mini Breadboard compatible with Arduino MEGA 2560 R3
- EASY TO INSTALL: Due to its compact design, it can be easily installed on the MEGA 2560 and other similar modules
- SEVERAL APPLICATIONS: With the included Mini Breadboard you can easily wire up various projects directly on the microcontroller
- READY TO USE: Thanks to the integrated buttons and LED, the input and output possibilities are simple, no additional parts or wiring are required – ready to work!
SKU: 1692 -
Development Boards, Development tools, Discrete Electronic Components, Modules and Breakout Boards
8051 AVR MCU Minimum System Development Board Microcontroller Programmer
Development Boards, Development tools, Discrete Electronic Components, Modules and Breakout Boards8051 AVR MCU Minimum System Development Board Microcontroller Programmer
If you are learning microcontrollers or want to quickly develop embedded project based on standard 8051 core, than this board will help you quick start with the application by giving you access to everything required to run the AT89S52 microcontroller. With this board you can develop and prototype with any of 8051 40 pin microcontrollers. The board have inbuilt user buttons, crystal and status LED.
SKU: 1054 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
Liquid pH Sensor With BNC pH Electrode Probe For Arduino
-12%
General Sensors, Modules and Breakout Boards, Sensors & TransducersLiquid pH Sensor With BNC pH Electrode Probe For Arduino
- The pH stands for the power of hydrogen, which is a measurement of the hydrogen ion concentration in the body.
- The total pH scale ranges from 1 to 14.
- 7 considered to be neutral.
- A pH less than 7 is said to be acidic.
- solutions with a pH greater than 7 are basic or alkaline.
- Heating voltage: 5 ± 0.2V (AC · DC)
- Working current: 5-10mA
- Detectable concentration range: PH0-14
- Detection Temperature range: 0-80 ℃
- Component Power: ≤0.5W
SKU: 1418 -
EV Parts, Mechanical, Motors and Driver
MY1016Z3 24V 350W DC 9T Gear Reduction Electric Motor For Electric Scooter Bicycle Kit
EV Parts, Mechanical, Motors and DriverMY1016Z3 24V 350W DC 9T Gear Reduction Electric Motor For Electric Scooter Bicycle Kit
MY1016Z3 DC Gear Reduction Electric Motor 24V 350W Electric Scooter Bicycle Conversion Motor with 9T Gear for Electric Scooter Bicycle Kit, High Torque Metal Electric DC gear motor. We offer you this motor at best price online in Pakistan.
SKU: EB-09 -
Crystal Oscillators, Discrete Electronic Components
12Mhz Crystal Oscillator
- 18pF of Load Capacitance
- Frequency Tolerance(Ƹf/f) range is ± 30ppm
- Frequency Temperature Stability range is ±50ppm
- Resonance Resistance 40ohms (max)
- Oscillation mode: Fundamental mode
- Shunt Capacitance less than 7pF
- Drive Level less than 100µW
- Operating Temperature Range: -20 to + 70°C
- Operable Temperature Range: -25 to + 85°C
- Storage Temperature Range: -55 to + 125°C
- Insulation Resistance: 500 M ohms
SKU: 0525 -
3D Printer Parts, CNC & 3D Printers, CNC Machine Parts
2040 T-Slot Aluminum Profile Extrusion for 3D Printer & CNC Machine
3D Printer Parts, CNC & 3D Printers, CNC Machine Parts2040 T-Slot Aluminum Profile Extrusion for 3D Printer & CNC Machine
- V slot aluminium profile can work as same as T slot aluminium profile, all T slot accessories (such as T nuts) can fit V slot aluminium profile.
- V slot aluminium profile support linear motion, you can build such as 3d printer and so on.
- V slot aluminium profile extrusions are perfect for custom machine frames, workstations, prototyping, guarding and many more purposes.
SKU: CNC-261 -
3D Printer Parts, CNC & 3D Printers
Toothless 5mm GT2 Timing Belt Idler Pulley With Bearing For 3D Printer
3D Printer Parts, CNC & 3D PrintersToothless 5mm GT2 Timing Belt Idler Pulley With Bearing For 3D Printer
This is GT2 Aluminum Pulley (Without 20 teeth) 5mm Bore for 6mm Belt. The pulley and the timing belt combo forms an integral part of the 3-D printer. This product contains GT2 pulley of 5mm bore and used for the precision motion to print even the most intricate designs.
GT2 Timing Belt Pulley is widely used in the 3d printers. GT2 Timing Belt pulley Specially design for NEMA 17 Stepper Motor used in 3d Printer.
SKU: CNC-136 -
Gas Sensors, Modules and Breakout Boards, Sensors & Transducers
MQ-3 Alcohol Ethanol Gas Sensor Module
Gas Sensors, Modules and Breakout Boards, Sensors & TransducersMQ-3 Alcohol Ethanol Gas Sensor Module
- Sensor Type – Semiconductor
- Easy SIP header interface
- Compatible with most of the microcontrollers
- Low-power standby mode
- Requires heater voltage
- Good sensitivity to alcohol gas
- Fast response and High sensitivity
- Long life and low cost
- Requires simple Drive circuit
SKU: 0127 -
Discrete Electronic Components, General Electronics
Turbidity Sensor Suspended Turbidity Value Detection Module Kit Liquid Suspended Particles Turbidity Detection
Discrete Electronic Components, General ElectronicsTurbidity Sensor Suspended Turbidity Value Detection Module Kit Liquid Suspended Particles Turbidity Detection
Water Turbidity Sensor with Analog Output Module is an electronic monitoring module specially developed to work with microcontroller platforms Arduino, Raspberry Pi, PIC, ARM, AVR, among others. Buy online in Pakistan
SKU: 1447 -
Crystal Oscillators, Discrete Electronic Components
32.768KHz Crystal Oscillator
- 18pF of Load Capacitance
- Frequency Tolerance(Ƹf/f) range is ± 30ppm
- Frequency Temperature Stability range is ±50ppm
- Resonance Resistance 40ohms (max)
- Oscillation mode: Fundamental mode
- Shunt Capacitance less than 7pF
- Drive Level less than 100µW
- Operating Temperature Range: -20 to + 70°C
- Operable Temperature Range: -25 to + 85°C
- Storage Temperature Range: -55 to + 125°C
- Insulation Resistance: 500 M ohms
SKU: 0520 -
CCTV and IP Cameras
Mini WIFI Wireless Security Spy Camera
One camera is not only portable small, but also comes with all useful features you need in daily life. 150° Wide Angle, Motion Activated Push Alerts, No-Glow IR Night Vision, Recording while Charging, iOS and Android Compatible, Live Stream or Playback from Anywhere, SD Card Recording, One Camera Shared with Multiple Users.
SKU: CAM-007 -
Audio & Visual, Camera & Imaging, Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry Pis
Nigh Vision Raspberry Pi Camera Board v1.3 (5MP, 1080p)
Audio & Visual, Camera & Imaging, Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry PisNigh Vision Raspberry Pi Camera Board v1.3 (5MP, 1080p)
Night Vision Raspberry Pi Camera Board v1.3 It’s able to deliver a crystal clear 5MP resolution image, or 1080p HD video recording at 30fps. Buy online in Pakistan.
SKU: 1484 -
Discrete Electronic Components, ICs, Logic Gates
74LS32 Quad 2-input OR Gate IC
- Operating voltage range: +4.75 to +5.25V
- Recommended operating voltage: +5V
- Maximum supply voltage:7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Typical Rise Time: 18ns
- Typical Fall Time: 18ns
- Operating temperature:0°C to 70°C
- Storage Temperature: -65°C to 150°C
SKU: 0410 -
Buttons, Switches & Pads, Connectivity, Touch Switch
Jog Type Capacitive Touch Switch Digital Touch Sensor TTP223B Module For Arduino
Buttons, Switches & Pads, Connectivity, Touch SwitchJog Type Capacitive Touch Switch Digital Touch Sensor TTP223B Module For Arduino
A capacitive touch sensor module based on the dedicated TTP223B touch sensor IC. The module provides a single integrated touch sensing area of 11 x 10.5mm with a sensor range of ~5mm. An on-board LED will give a visual indication of when the sensor is triggered.
SKU: 0642 -
EV Parts
36V 48V 1000W 30A DC Brush Motor Controller Electric Bike Controller Speed Controller for Brushed Motor Electric Bicycle Parts E-bike Controller
EV Parts36V 48V 1000W 30A DC Brush Motor Controller Electric Bike Controller Speed Controller for Brushed Motor Electric Bicycle Parts E-bike Controller
Electric Scooter Controller 36V 48V 1000W 30A DC Brush Motor Controller Electric Bike Controller Speed Controller for Brushed Motor Electric Bicycle Parts E-bike Controller EV Accessories Parts. The battery type can be Lithium battery, Lead Acid battery etc.
SKU: 1753 -
DIP Transistors, Discrete Electronic Components, Transistors
TIP41C 100V 6A NPN General Purpose Power Silicon Transistor(Original)
DIP Transistors, Discrete Electronic Components, TransistorsTIP41C 100V 6A NPN General Purpose Power Silicon Transistor(Original)
- NPN medium power transistor
- Collector-Emitter Saturation Voltage – VCE(sat) = 1.5 V
- Collector-Emitter voltage = 40V
- I C min: 0.5A
- I C max: 6A
- I C peak max: 10 A (t p <5ms)
- I B max: 3A
- P TOT : 65W
- V CEO : 100V, V CBO : 100V, V EBO : 5V
- h FE : 15 to 75 (@ I C = 3A, V CE = 4V )
- High suicheo speed
- Complementary: TIP42C
- Encapsulated: TO-220
SKU: 0226 -
Modules and Breakout Boards, Voltage, Current & Power
2 in 1 DC 0-100V 50A Voltmeter Ammeter With DC 50A 75mV Ampere Shunt Dual 0.28″ Red Blue Voltage Detector Current Indicator
Modules and Breakout Boards, Voltage, Current & Power2 in 1 DC 0-100V 50A Voltmeter Ammeter With DC 50A 75mV Ampere Shunt Dual 0.28″ Red Blue Voltage Detector Current Indicator
0.28” digital voltage ampere meter voltmeter ammeter DC 0-100V 50A red and blue dual LED display voltage amperage current meter 2 in 1 tester with 50A/75mV shunt resistor
SKU: 1092 -
-
Modules and Breakout Boards, STM Boards
STM32F103 Blue Pill ARM Cortex-M3 Minimum System Development Board
Modules and Breakout Boards, STM BoardsSTM32F103 Blue Pill ARM Cortex-M3 Minimum System Development Board
STM32F103C8T6 is a very powerful Microcontroller and with its 32-bit CPU, it can easily beat Arduino UNO in performance. As an added bonus, you can easily program this board using your Arduino IDE (although with some tweaks and additional programmer i.e. USB to U(S)ART converter).
SKU: 1068 -
IOT Development Board, Modules and Breakout Boards
EM18 – 125Khz RFID Reader Module
EM-18 is a nine pin device. Among nine pins, 2 pins are not connected, so we basically have to consider seven terminals.
Pin Number Description VCC Should be connected to positive of power source. GND Should be connected to ground. BUZZ Should be connected to BUZZER NC No Connection NC No Connection SEL SEL=1 then o/p =RS232 SEL=0then o/p=WEIGAND
TX DATA is given out through TX of RS232 DATA1 WEIGAND interface DATA HIGH pin DATA0 WEIGAND interface DATA LOW pin SKU: 1166 -
Breakout Boards, Modules and Breakout Boards
W5500 SPI to Ethernet LAN Network Module
The Ethernet module for Arduino and compatible boards based on the Wiznet W5500 chip, faster than the previous W5100. It provides an easy way to connect your module to the local network and internet based WIZNET with a TCP/IP interface. Compatible with libraries with the same Ethernet API. A web server can be built with this shield. It can be used as a server or as a client.
SKU: 1538 -
3D Printer Parts, CNC & 3D Printers
0.5mm Mk3 Brass Nozzle for 3D Printer
Buy online 0.5mm 3D Printer Brass Nozzle Accessories Mk3 in Pakistan. Electrobes has quality products for 3D printers & CNC machines. Also available in 0.2mm, 0.25mm, 0.3mm, 0.35mm, 0.4mm, 0.6mm, 0.8mm and 1.0mm.
SKU: CNC-050-1 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 20S 72V 40A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 20S 72V 40A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS 20S 72V Lithium Li Ion Battery Pack BMS With Balance And Waterproof 30A 40A 50A 60A Used For 72V E-bike Scooter PCB PCM Board Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-018 -
Instruments & Tools, Meters
UNI-T UT207B Digital Clamp Meter AC Current Ammeter Multimeter
UNI-T Digital Clamp Meter UT207B Inrush Current AC/DC 1000A True RMS HVAC Volt Amp Ohm Meter Clamp On Multimeter Auto Ranging 6000 Counts, Frequency AC DC Voltage LPF ACV Capacitance Duty Cycle Tester at best price in Pakistan
SKU: DM-006 -
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry Pis
Heat Sink Copper Heatsink Radiator Cooling Kit Cooler For Raspberry Pi 4 Model B
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry PisHeat Sink Copper Heatsink Radiator Cooling Kit Cooler For Raspberry Pi 4 Model B
A complete set of heats sinks for Rapsberry pi, which provide coolant facility to Raspberry Pi. It is made of Pure Copper for better performance. The fins increase the area of the board and thus provide for greater heat transfer.
SKU: 1491 -
Environmental
BME280 Altimeter Barometric Pressure Temperature Humidity Sensor Module 3.3V
- Multi-Parameter Sensing: Simultaneously measures temperature, relative humidity, and barometric pressure.
- High Accuracy: Ensures precise readings, with a temperature accuracy of ±1°C, humidity accuracy of ±3%, and pressure accuracy of ±1 hPa.
- Wide Operating Range: Functions across a broad temperature range of -40°C to +85°C and pressures from 300 hPa to 1100 hPa.
- Compact Design: The small form factor makes it ideal for space-constrained applications.
- I²C & SPI Interfaces: Supports both communication protocols for easy integration with microcontrollers like Arduino, ESP32, and Raspberry Pi.
- Low Power Consumption: Perfect for battery-operated projects and energy-efficient designs.
- Voltage: 3.3-5V input
SKU: 0741 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 13S 48V 100A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 13S 48V 100A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS Li-ion 13S 48V 100A BMS Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-012 -
-
-
General Sensors, Modules and Breakout Boards, Sensors & Transducers
MAX9814 Auto Gain Control Stable Microphone Amplifier
General Sensors, Modules and Breakout Boards, Sensors & TransducersMAX9814 Auto Gain Control Stable Microphone Amplifier
Buy online MAX9814 Auto Gain Control Stable Electric Microphone Amplifier in Pakistan. Supply Voltage: 2.7v-5.5v @ 3mA current, Low THD: 0.04% (typ). Output: 2Vpp on 1.25V bias.
SKU: 0118 -
IOT Development Board, Modules and Breakout Boards
RC832 Receiver and TS832 Transmitter 32Ch 5.8G 600mW Wireless AV for FPV
IOT Development Board, Modules and Breakout BoardsRC832 Receiver and TS832 Transmitter 32Ch 5.8G 600mW Wireless AV for FPV
Buy online RC832 Receiver+TS832Transmitter 32Ch 5.8G 600MW Wireless AV for FPV in Pakistan. 600mW transmitter power assure 5KM distance in open area, 5-8 KM is available if work with the bigger gain antenna.
SKU: 1158 -
Discrete Electronic Components, Filter & Amplifiers, ICs
LM386 Audio Amplifier IC
- Operating voltage range: +4.75 to +5.25V
- Recommended operating voltage: +5V
- Maximum supply voltage:7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Typical Rise Time: 18ns
- Typical Fall Time: 18ns
- Operating temperature:0°C to 70°C
- Storage Temperature: -65°C to 150°C
SKU: 0421 -
Essential tools, Instruments & Tools
Soldering Paste Flux Grease Weak Acid SMD
Solder flux is a must have when performing any kind of solder rework. The flux is the substance that prevents beading of the solder and helps the solder flow cleanly onto the parts you are soldering. However, flux is mildly corrosive over long lengths of time (months).
SKU: 0785 -
Motor and Gears, Robotics & Machines
JGB37-550 DC 12V 680RPM High Torque Metal Gear DC Motor
DC 12V 680 RPM High Speed Large Torque Motor has stable and reliable performance. It is very easy to disassemble, clean and maintain. Highlighted feature of this module is excellent quality and long service life. It is micro, compact and light weight. This motor is high-speed and high-power, and is generally powered by a lithium battery. This DC motor can save electricity to a great extend. Environmental protection is the another inevitable feature of this DC motor. The sound at DC 12V is relatively loud, because the motor itself has a fan, coupled with high speed, the motor’s own no-load current is 1.25 A, so the noise is reasonable, but the torque of this motor is very strong. At the same speed, its torque should be more than twice that of the ordinary 555 geared motor.
SKU: 1198 -
Adapters, Batteries & Chargers
24V 10A 240W Switching Mode Power Supply SMPS Adapter
24V power supplies (or 24VDC power supplies) are one of the most common power supplies in use today. In general, a 24V DC output is obtained from a 110VAC or 220VAC input using a combination of transformers, diodes and transistors.
SKU: CNC-188 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS LFP LifePo4 8S 24V 80A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS LFP LifePo4 8S 24V 80A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
DALY BMS 8S 24V LifePO4 PCB Protection Board with Balance Wire and Temperature Sensor for 8 3.2V Cells 24V LiFePO4 Lithium Battery Pack with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-032 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
Tilt Sensor Module SW-520D
Their function is to detect the plane shift from horizontal to vertical and sent of a signal when it happens. There are modules which could sense even small plane shifts but here we are going to discuss about simple contact type TILT SENSOR module. Here we are going to use TILT SENSOR MODULE SW-520D
SKU: 0474 -
-
Converters, Modules and Breakout Boards
DC-DC 24V/12V To 5V 5A Step Down Power Supply Buck Converter Adjustable USB Step-down Charging Module
Converters, Modules and Breakout BoardsDC-DC 24V/12V To 5V 5A Step Down Power Supply Buck Converter Adjustable USB Step-down Charging Module
- Synchronous rectification scheme, wide voltage input, high current output, high efficiency.
- With DC plug and terminals, easy to use.
- With USB port, with fast-charge identification chip compatible with Andrews and iphone mobile phone.
- Input voltage: DC 9V – 36V.
- The output voltage: 5.2V / 5A / 25W.
SKU: 1863 -
-
General Sensors, Modules and Breakout Boards, Sensors & Transducers
MAX30100 Heart Rate Oxygen Pulse Breakout Sensor Module For Arduino
General Sensors, Modules and Breakout Boards, Sensors & TransducersMAX30100 Heart Rate Oxygen Pulse Breakout Sensor Module For Arduino
The MAX30100 is an integrated pulse oximetry and heart-rate monitor module. It includes internal LEDs, photodetectors, optical elements, and low-noise electronics with ambient light rejection.
SKU: 1481 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS LFP LifePo4 24S 72V 30A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS LFP LifePo4 24S 72V 30A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
DALY BMS 24S 72V LifePO4 PCB Protection Board with Balance Wire and Temperature Sensor for 24 3.2V Cells 72V LiFePO4 Lithium Battery Pack with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-038 -
CNC & 3D Printers, CNC Machines
Twotrees TS2-40 40W Diode LASER Engraving Laser Marking Machine
- Quick and precise positioning with sliding block focus mechanism.
- Seamlessly switch between 20W and 40W for versatile cutting needs.
- Effortlessly control and transfer data via WiFi, TF card, or USB.
SKU: CNC-296 -
Robotics & Machines, Stepper Motors & Drivers
Nema17 12-24V Stepper motor 1.8/step 6 Wire (Used)
-27%
Robotics & Machines, Stepper Motors & DriversNema17 12-24V Stepper motor 1.8/step 6 Wire (Used)
NEMA17 6 Wire Bipolar Stepper Motor NEMA17 Stepper Motor NEMA 17 Stepper Motors very useful in the various application especially which demands low speed with high precision Many machines such as 3D Printers CNC Router and Mills Camera Platforms XYZ Plotters etc Nema17 6 wire Bipolar Stepper.
SKU: 1640 -
Breadboards, Protoboards & PCBs, Discrete Electronic Components
16.3 x 5.3cm MB-102 Breadboard Solderless Prototyping Board
Breadboards, Protoboards & PCBs, Discrete Electronic Components16.3 x 5.3cm MB-102 Breadboard Solderless Prototyping Board
Breadboard Project Board MB102 830Points Solderless Prototype Breadboard Solder-less breadboard is commonly used by students and hobbyists to quickly assemble an electronics project without using soldering station. These Breadboard Project Board MB102 can be connected with one-another to make a larger board for complex projects.
SKU: 0668 -
Adapters, Batteries & Chargers
12V 10A 120W Switching Power Supply Driver
12V power supplies (or 12VDC power supplies) are one of the most common power supplies in use today. In general, a 12VDC output is obtained from a 110VAC or 220VAC input using a combination of transformers, diodes and transistors.
SKU: CNC-185 -
Discrete Electronic Components, General ICs, ICs
74LS17 7417 HEX Buffer HD7417 High Voltage Open Collector IC
Discrete Electronic Components, General ICs, ICs74LS17 7417 HEX Buffer HD7417 High Voltage Open Collector IC
- Convert TTL Voltage Levels to MOS Levels
- High Voltage Open Collector
- High Sink-Current Capability Design
- HEX Buffer
- Open-Collector Driver for Indicator Lamps
- Inputs Fully Compatible With Most TTL Circuits
SKU: 0569 -
3D Printers, CNC & 3D Printers
Anycubic Kobra 3 Max FDM 3D Printer, 420x420x500mm Largest Bed Size, 600mm/s High Speed 3D Printer
3D Printers, CNC & 3D PrintersAnycubic Kobra 3 Max FDM 3D Printer, 420x420x500mm Largest Bed Size, 600mm/s High Speed 3D Printer
● The Largest Consumer-Grade Multicolor 3D Printer
● 420*420*500mm Print Volume
● Support Latest ACE PRO Flawless 8-Color Printing
● Precise Auto-Leveling & Anti-Step Lost
● Filament Box with Drying Capability
● 600mm/s High-Speed Printing
● Anycubic Slicer Next & Anycubic App UpgradeSKU: TDP-074 -
EV Parts
48-72V 3000W-3500W 50A DC Brushless Motor Controller Electric Bike Controller Speed Controller for Hub Motor Electric Bicycle Parts E-bike Controller
EV Parts48-72V 3000W-3500W 50A DC Brushless Motor Controller Electric Bike Controller Speed Controller for Hub Motor Electric Bicycle Parts E-bike Controller
Electric Scooter Controller 48-72V 3000-3500W 50A DC Brushless Motor Controller Electric Bike Controller Speed Controller for Brushless Hub Motor Electric Bicycle Parts E-bike Controller EV Accessories Parts. The battery type can be Lithium battery, Lead Acid battery etc.
SKU: EB-41 -
3D Printers, CNC & 3D Printers
3D Printing Drawing Pen for Creative Modelling and Education
3D pen is a pen that extrudes heated or warm plastic from the pen’s nozzle. You don’t need any software. But what makes a 3D Pen for Kids truly unique is its ability to“ draw” in mid-air, allowing you to instantly form 3D structures right in front of you, which you can pick up and hold in your hand.
SKU: TDP-030 -
Development Boards, Modules and Breakout Boards, STM Boards
ST-LINK V2 (CN) – STM8 / STM32 Programmer & Debugging Emulator
Development Boards, Modules and Breakout Boards, STM BoardsST-LINK V2 (CN) – STM8 / STM32 Programmer & Debugging Emulator
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
SKU: 1408 -
Instruments & Tools, Meters
UNI-T UT33A+ Palm Size Digital Multimeter DMM
The new generation UT33+ series redefines the performance standards for entry-level digital multimeters. Our innovative industrial design ensures that these products can withstand 2 meters drop. The new LCD display layout provides a better user experience. This series ensures that users can work safely in CAT II 600V environment. Special features are, 2mF capacitance test (UT33A+); battery test (UT33B+); temperature measurement function (UT33C+); non-contact voltage (NCV) test (UT33D+).
SKU: DM-002 -
3D Printers, CNC & 3D Printers, FDM 3D Printers
Official CREALITY K1 Max Fastest FDM 3D Printer with 600mm/s Max. Speed 300x300x300mm Printing Volume
3D Printers, CNC & 3D Printers, FDM 3D PrintersOfficial CREALITY K1 Max Fastest FDM 3D Printer with 600mm/s Max. Speed 300x300x300mm Printing Volume
Creality K1 Max 3D Printers, 600mm/s Max Speed 20000mm/s² Acceleration 32mm³/s Max Flow Hotend Hands-Free Auto Leveling Dual Cooling and 300mm printing volume is available at electrobes at the best price online in Pakistan
SKU: TDP-012 -
3D Printer Parts, CNC & 3D Printers, CNC Machine Parts
Sliding T-Nut M3, M4, M5, M6 for 2020 V-Slot and T-Slot Aluminum Profiles
3D Printer Parts, CNC & 3D Printers, CNC Machine PartsSliding T-Nut M3, M4, M5, M6 for 2020 V-Slot and T-Slot Aluminum Profiles
- Black surface treatment, beautiful and durable.
- V slot aluminium profile can work as same as T slot aluminium profile, all T slot accessories (such as T nuts) can fit V slot aluminium profile.
- V slot aluminium profile support linear motion, you can build such as 3d printer and so on.
- V slot aluminium profile extrusions are perfect for custom machine frames, workstations, prototyping, guarding and many more purposes.
SKU: CNC-208 -
Discrete Electronic Components, General ICs, ICs
555 Timer IC
- Typical operating voltage is +5V, can withstand a maximum of +18V.
- The source/sink current of the output pin is 200mA
- Consumes up to 3mA when operating at +5V
- Trigger Voltage is 1.67 when operating at +5V
- Operating Temperature is 70 degree Celsius.
- Available in 8-pin PDIP, SOIC, and VSSOP packages
SKU: 0250 -
Modules and Breakout Boards, Sensors & Transducers, Temperature Sensor
MAX6675 Module + K Type Thermocouple
Modules and Breakout Boards, Sensors & Transducers, Temperature SensorMAX6675 Module + K Type Thermocouple
This temperature sensor and module makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) to provide accurate temperature compensated measurement of the supplied K-Type thermocouple sensor. This sensor is available at electrobes shop online in Pakistan.
SKU: 0141 -
Modules and Breakout Boards, Proximity/Distance Sensors, Sensors & Transducers
NJK-5002C Tubular Proximity Sensor Switch NPN 3 Wire DC 6-36V
Modules and Breakout Boards, Proximity/Distance Sensors, Sensors & TransducersNJK-5002C Tubular Proximity Sensor Switch NPN 3 Wire DC 6-36V
LJ12A3-4-Z/BX NPN NO Proximity Sensor Cylinder Inductive switch work. Anti Vibration, Dust, Water, Oil Prevention, Reverse Power Protection, Short Circuit Protection, Directly Connecting with PLC can Replace Small & Limit Switches.
SKU: 1124 -
Converters, Modules and Breakout Boards
XL6009E1 1.3-35V 3A Auto Step Up/Down Buck/Boost DC-DC Converter
Converters, Modules and Breakout BoardsXL6009E1 1.3-35V 3A Auto Step Up/Down Buck/Boost DC-DC Converter
XL6009 module is a non-isolated step-up boost voltage converter featuring adjustable output voltage, high efficiency. It converts input voltage of 5-32V DC to an output voltage of 4-38V DC.
SKU: 1779 -
-
3D Printer Parts, CNC & 3D Printers
3D printer track Bearing pulley BX24 accessories Open builds
Features:
1. This item is well made of premium material for durable and practical use.
2. With high quality and precise design, it will ensure its popularity and practicability among users.
3. Perfect accessory for your 3D printer.
SKU: CNC-169 -
-
General Sensors, Modules and Breakout Boards, Sensors & Transducers
5Kg Scale Bar Load Cell Weight Sensor
General Sensors, Modules and Breakout Boards, Sensors & Transducers5Kg Scale Bar Load Cell Weight Sensor
This straight bar load cell (sometimes called a strain gauge) can translate up to 5kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.
SKU: 0947 -
Instruments & Tools, Meters
UNI-T UDP6952B DC Power Supply, 60V 25A 600W Voltage Current Regulator, Stabilizer Switching Power Supply, AC 220V 110V Input
Instruments & Tools, MetersUNI-T UDP6952B DC Power Supply, 60V 25A 600W Voltage Current Regulator, Stabilizer Switching Power Supply, AC 220V 110V Input
- TYPE: Programmable Switching DC power supply
- Channels: 1
- TOTAL POWER : 600W
- OUTPUT VOLTAGE: 0~60V
- OUTPUT CURRENT: 0~25A
- Accuracy / resolution: (1mV/0.1mA)
- Connectivity: RS-232, RS485, USB, LAN
SKU: DM-030 -
-
-
Discrete Electronic Components, General ICs, ICs, Logic Gates
CD4073 CMOS Triple 3-Input AND Gate Breadboard-Friendly IC DIP-14
Discrete Electronic Components, General ICs, ICs, Logic GatesCD4073 CMOS Triple 3-Input AND Gate Breadboard-Friendly IC DIP-14
The CD4073BE is a 3-input CMOS Triple AND Gate provides the system designer with direct implementation of the AND function and supplement the existing family of CMOS gates.SKU: 1178 -
3D Printers, CNC & 3D Printers, FDM 3D Printers
Bambu Lab A1 Mini Multi-Color Printing FDM 3D Printer
3D Printers, CNC & 3D Printers, FDM 3D PrintersBambu Lab A1 Mini Multi-Color Printing FDM 3D Printer
- Works right out of the box, set up in 15 minutes
- Well-polished hardware and software
- Enclosed-body for high-temperature filament printing
- Up to 16-color printing with AMS
- Up to 20000 mm/s² acceleration, prints a benchy in 18min
- Build-in camera for remote monitoring and timelapse
SKU: TDP-052 -
-
Buttons, Switches & Pads, Connectivity, Touch Switch
TTP229 16 Key 4×4 16 Channel Digital Capacitive Touch Keypad
-29%
Buttons, Switches & Pads, Connectivity, Touch SwitchTTP229 16 Key 4×4 16 Channel Digital Capacitive Touch Keypad
This 16 key capacitive touch keypad is based on the TTP229 capacitive sensor with accurate sensing of up to 16 points. Using this keypad provides a solid state alternative to mechnical type keypads providing the advantage of greater durability especially in dusty environments.
SKU: 0644 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS LFP LifePo4 16S 48V 20A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS LFP LifePo4 16S 48V 20A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
DALY BMS 16S 48V LifePO4 PCB Protection Board with Balance Wire and Temperature Sensor for 16 3.2V Cells 48V LiFePO4 Lithium Battery Pack with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-028 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 13S 48V 80A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 13S 48V 80A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS Li-ion 13S 48V 80A BMS Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-011 -
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry Pis
Raspberry Pi 4 Case, Raspberry Pi 4 Fan ABS Case With Cooling Fan – Red and White
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry PisRaspberry Pi 4 Case, Raspberry Pi 4 Fan ABS Case With Cooling Fan – Red and White
- Newest ABS case for Raspberry Pi 4 Model B.
- Full access to all Raspberry Pi 4 ports, such as GPIO port, Micro HDMI port, USB port, SD CARD slot.
- Support install the cooling fan on the cover , don’t worry the mainboard be over heat.
- Sliding design cover , make it more convenient to use.
- ABS material is stronger and light , won’t block the WiFi and bluetooth.
SKU: 1167 -
-
-
-
3D Printer Parts, CNC & 3D Printers
MK8/9 Dual Extruder Feed Device Part For 3D Printer 1.75mm Filament – 1( Left Side)
-6%
3D Printer Parts, CNC & 3D PrintersMK8/9 Dual Extruder Feed Device Part For 3D Printer 1.75mm Filament – 1( Left Side)
Buy online MK8/9 Dual Extruder Feed Device Part For 3D Printer 1.75mm Filament – 1( Left Side) in Pakistan. Electrobes has quality products for 3D printers & CNC machines, ABS, PLA.
SKU: CNC-067 -
Breakout Boards, Modules and Breakout Boards
QFP64-32 0.8mm SMD to DIP16 Adapter Dual Side
Buy online SSOP16 TSSOP16 SOP16 SMD to DIP16 Adapter Dual Side in Pakistan. Dual sided SOP16, SSOP16 and TSSOP16 to DIP PCB adapter, one side has pin pitch size 0.65 mm to 2.54 mm DIP, and other side is 1.27 mm to 2.54 mm DIP.
SKU: 0576 -
3D Printer Filaments, CNC & 3D Printers
ESUN e-PLA Matte 1.75mm 3D Printer Filament 1kg/Roll
eSUN e-PLA Matte Filament 1.75mm, 3D Printer PLA Plus Filament, Dimensional Accuracy 1.75mm, 1kg(2.2lbs) Cardboard Spool 3D Printing Filament Fits for Most FDM 3D Printers. This High quality PLA+ Filament available at electrobes has weight of 1Kg.
SKU: PF-038 -
Consumer Electronics
DC AC 12V 10A Switch Automatic Auto On Off Photocell street Light Switch Photo Control Photoswitch Sensor Switch
Consumer ElectronicsDC AC 12V 10A Switch Automatic Auto On Off Photocell street Light Switch Photo Control Photoswitch Sensor Switch
Street Road Light Auto Operated Control Switch 10A 12V is widely used for security and other purposes, such as street light, highway, factories, garden, ports, airports, farms, parks, schools, and other places. The product can turn on or turn off light according to ambient-light; Ambient-temperature and humidity can’t affect it. It is not only convenient but also practical, It can control the load working only at night. For instance road light, garden light etc.
SKU: 1621 -
Batteries & Chargers, BMS (Battery Management System)
3S 100A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
Batteries & Chargers, BMS (Battery Management System)3S 100A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
3S 100A 12.6V Cell 18650 Li-ion Lithium Rechargeable Battery Charging 3 cell BMS Battery charge protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: 1785 -
-
Modules and Breakout Boards, Relay Boards
Timer Relay 6 To 30V Adjustable Delay Timer
This is a timer relay suitable for your incubator and other time-related projects. Timer relay is a Digital display Led Home Automation Delay Timer Control Switch Module Timer Controller, Operating voltage: 6-30V, support micro USB 5.0V power supply, Can control the device within DC 30V 5A or AC 220V 5A; It can be applied to many fields; wide range of application.
SKU: 1410 -
-
Discrete Electronic Components, Educational & DIYs, Tools & Accessories
PBC096 Power Bank Housing PCB Board Torch LED
Discrete Electronic Components, Educational & DIYs, Tools & AccessoriesPBC096 Power Bank Housing PCB Board Torch LED
DIY Power bank housing shell with Digital LCD display PCB and night high intensity LED torch compartment for six cells to achieve more capacity, ever wonder to make your own high quality power bank instead purchasing from market low level fake capacities power bank, we have this power bank housing with intelligent PCB to charge battery with buck converter and boost converter to recharge your mobile phone with 2 USB ports and Digital LCD display backup status.
SKU: 1434 -
-
CNC & 3D Printers, Resin
JAMG HE Water Washable 3D Printer Resin – 1000g
3D Printer Resin, JamgHe Water Washable Resin for LCD DLP SLA 405nm Printer UV-Curing Photopolymer Rapid High Precision Low Odor Standard Resin. Jamg He distributors of all types of resins and filaments we hold in our stock.
SKU: PF-009 -
3D Printer Filaments, CNC & 3D Printers
3D Touch BLTouch V3.1 Auto Bed Leveling Sensor for 3D Printer
3D Printer Filaments, CNC & 3D Printers3D Touch BLTouch V3.1 Auto Bed Leveling Sensor for 3D Printer
3D print with the BLTouch sensor to reap the benefits of advanced auto-bed leveling. The BLTouch sensor is an innovative device that works with extreme precision to ensure that your print bed is as level as possible. Install the game-changing BLTouch v3.1 onto any print surface to produce high-quality 3D models!
Discover accuracy and a professional workflow with the BLTouch Auto-bed leveling sensor. This sensor is key to creating a great foundation for your 3D model. The BLTouch Sensor is delivered pre-crimped with spare connectors for an easy and smooth installation.
If you have a Creality 3D printer, the BLTouch sensor can also be used as an upgrade or spare part. Use the BLTouch auto-bed leveling kit for the following Creality 3D machines:
- Ender 3
- Ender 3 Pro
- Ender 5 (pro)
- CR-10
- CR-10 mini
SKU: CNC-200 -
3D Printer Parts, CNC & 3D Printers
PC4-M5 Quick Coupler Straight Threaded Pneumatic Push In for Hotend Connection
3D Printer Parts, CNC & 3D PrintersPC4-M5 Quick Coupler Straight Threaded Pneumatic Push In for Hotend Connection
Model : PC4-M5 ;
Tube and Thread Size : 4mm OD x M5
TUBE FITTINGS. Push-to-connect tube connection on one end and male G threads on the other end.
ADVANTAGE. Have abrasion resistance, light weight, and resistance to crushing and cracking, compressive and corrosion resistant, good sealing performance and long service life.
MATERIAL. Designed for using to connect with polyethylene, nylon and PU tubing. Quick and simple installation
SKU: CNC-167 -
CNC & 3D Printers, CNC Machines
Twotrees TTS-20 Pro 20W Diode LASER Engraving Laser Marking Machine
Independent App Control: Engraving can be performed without a computer, supported by app control, Wi-Fi connection, or USB connection, enhancing efficiency.
Easily Replaceable Components: The modular design allows independent replacement or exchange of parts.
High Power and Positioning Accuracy: Ensures complex and efficient high-speed engraving tasks.
SKU: CNC-294 -
