[vc_row][vc_column]
-
-
Consumer Electronics
30mm X 33m High Temperature Heat Resistant Kapton Polyimide Adhesive Tape
- High-temperature resistance, solvent resistance, stable and reliable performance characteristics.
- It has excellent release properties, without leaving adhesive residue
- Also available in any widths or Die-cuts
- Available as Die-Cuts any size or shape
- Mainly used for painting, sealing, footwear, packaging fixed, construction, and decoration industries.
- Widely used as electrical insulation for the electronics industry in transformers, motors, coils, capacitors, and variable frequency power supply
SKU: 1810 -
Discrete Electronic Components, ICs, Op Amps
LM324 Quad OP-AMP IC
- Integrated with four Op-Amps in a single package
- Wide power supply Range
- Singe supply – 3V to 32V
- Dual supply – ±1.5V to ±16V
- Low Supply current – 700uA
- Single supply for four op-amp operation enables reliable operation
- Operating ambient temperature – 0˚C to 70˚C
- Soldering pin temperature – 260 ˚C (for 10 seconds – prescribed
SKU: 0435 -
Instruments & Tools, Oscilloscope
UNI-T UPO2104E Digital Oscilloscopes with 4 Analog Channels, 8inch LCD and 100MHz Frequency 1GS/s
Instruments & Tools, OscilloscopeUNI-T UPO2104E Digital Oscilloscopes with 4 Analog Channels, 8inch LCD and 100MHz Frequency 1GS/s
- Digital fluorescent display 256-level grayscale display capability, timely reflecting the probability of the appearance of the waveform, and the waveform change is clearly visible.
- Excellent storage depth Excellent storage depth Up to 56Mpts storage depth, users can capture longer Time signal without losing waveform details.
- Up to 80,000wfms/s waveform capture rate Up to 80,000wfms/s waveform capture rate, discover occasional problems in time, greatly improve the ability to capture extremely low-probability events, and observe signal jitter and glitches more intuitively
- Independent time base adjustable The time base of each channel is independently adjustable, which is convenient for users to observe four channels of frequencies at the same time Significantly different signals
- Rich data measurement functions Support 34 kinds of automatic measurement parameter functions, Support Zoom, Math, statistics and advanced calculation functions.
SKU: DM-022 -
Discrete Electronic Components, General ICs, ICs
74LS05 7405 HEX Inverter SN7405 Open Collector IC
- IC, HEX INVERTER, 74HC05
- Logic Type: Inverter
- Output Current: 5.2mA
- No. of Inputs: 1
- Supply Voltage Min: 2V
- Supply Voltage Max: 6V
- Logic Case Style: DIP
- No. of Pins: 14
- Operating Temperature Min: -40°C
- Operating Temperature Max: 85°C
- Packaging: Each
- Base Number: 74
- IC Generic Number: 74HC05
- Logic Function Number: 7405
- Logic IC Base Number: 7405
- Logic IC Family: HC
- Logic IC Function: Hex Inverters with Open Drain Outputs
- MSL: MSL 1 – Unlimited
- Operating Temperature Range: -40°C to +85°C
- Output Current Max: 4mA
- SVHC: No SVHC (16-Dec-2013)
- Supply Voltage: 5V
- Supply Voltage Range: 2V to 6V
SKU: 0566 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 6S 24V 80A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 6S 24V 80A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS Li-ion 6S 24V 80A BMS Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-006 -
Analog, Discrete Electronic Components, ICs
74LS90 7490 4-BIT Binary Decade BCD Counter IC
74LS90 Binary Counter Features
- It is used as a simple counter from 0 – 9.
- The IC has the ability to start from 0 and end at 9 automatically.
- IC can be used any TTL based device and microcontroller due to its TTL output.
- The IC has low power consumption.
- IC comes in multiple packages, PDSO, PDIP, and GDIP
- The IC has internal protection from clamp voltages.
SPECIFICATION
- The Power input range for IC is 4.75 to 5.25.
- The operating temperature range for IC is 0 to 70.
- The input voltages range for IC at HIGH state is 2.0 minimum and the LOW state is 0.7 maximum.
- IC draws output current at HIGH state is -0.4mA and for the LOW state is 8.0mA
- The internal clamp diode protection range is -1.5V.
More information is available in the datasheet:
SKU: 1582 -
Consumer Electronics, EV Parts
Universal Digital Odometer Power Meter Speedo Meter Instrument for Electric Tricycle Motorcycle Scooter
Consumer Electronics, EV PartsUniversal Digital Odometer Power Meter Speedo Meter Instrument for Electric Tricycle Motorcycle Scooter
Digital Odometer Power Meter Speedo Meter Instrument for Electric Tricycle, Motorcycle, Scooter, E-kart, Electric rikshaw and electric bicycle etc. We have all items required for electric scooter in stock. You can also get other related components like BLDC motor, speed controller and switches at electrobes-com-827299.hostingersite.com at cheaper price in Pakistan.
SKU: 1635 -
Audio & Visual, LCD & Display
8×2 LCD Display 0802 Character Display – Yellow Green
WH0802A1 is an 8 character by 2 lines 8×2 character LCD display. This 8×2 LCD module is available in various LCD panel colors including gray, yellow/green and blue LCD options. 0802 LCD module is built in with ST7066 controller (or equivalent). WH0802A1 model has different interfaces available, it’s default 6800 4/8-bit parallel 6800 interface, also it’s optional SPI and I2C by using RW1063 IC.
SKU: 0956 -
Automation Gadgets
S802 Pro Intelligent Door Lock with Doorbell HD Video Intercom, RFID, Pin, Key and Biometric Verification System
-9%
Automation GadgetsS802 Pro Intelligent Door Lock with Doorbell HD Video Intercom, RFID, Pin, Key and Biometric Verification System
- With HD Video intercom feature
- 5 methods to open the lock
- No Wiring Required
- Model S802 Pro
- Used for doors upto 38-100mm Thickness
- Elegant handle design with tempered glass
- Heavy duty lock
SKU: HA-013 -
3D Printer Filaments, CNC & 3D Printers, EXYZ Filaments
JAMG HE PLA 1.75mm 3D Printer Filament – 200g
3D Printer Filaments, CNC & 3D Printers, EXYZ FilamentsJAMG HE PLA 1.75mm 3D Printer Filament – 200g
JAMG HE PLA Filament 1.75mm, Hi-Speed PLA 3D Printer Filament, Dimensional Accuracy 1.75mm, 200g Cardboard Spool 3D Printing Filament Fits for Most FDM 3D Printers. This High quality PLA Filament available at electrobes has weight of 200g.
SKU: PF-039 -
Essential tools, Instruments & Tools
Anti Static Bracelet, Electrostatic ESD Discharge Cable Band Wrist Strap Cordless Anti Static Bracelet Electrostatic ESD Discharge Cable Band Wrist Strap
Essential tools, Instruments & ToolsAnti Static Bracelet, Electrostatic ESD Discharge Cable Band Wrist Strap Cordless Anti Static Bracelet Electrostatic ESD Discharge Cable Band Wrist Strap
- Simply wrap strap around wrist.
- Prevent Static shock in dry environment.
- Keep static from damaging electronic parts and equipment.
- Adjustable wrist strap.
- Inner conducting layer made of stainless shell.
- High Quality Strain relief.
- Soft elastic band for comfort.
SKU: 1767 -
CCTV and IP Cameras
Dahua IMOU A22EP Ranger 2 HD Wi-Fi Security Spy Camera IPC-A22EP
A22 1080P Wi-Fi PT Camera with 1080P HD live monitoring and 0~355 ° pan and -5 °~90 ° tilt features, the A22 ensures every corner of your home completely covered. Two way audio features let you stay in touch with your family. You can record daily or motion videos on Easy4ip Cloud and playback anytime anywhere.
SKU: CAM-008 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 20S 72V 30A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 20S 72V 30A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS 20S 72V Lithium Li Ion Battery Pack BMS With Balance And Waterproof 30A 40A 50A 60A Used For 72V E-bike Scooter PCB PCM Board Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-017 -
Adapters, Batteries & Chargers
12V 30A 360W Switching Power Supply Driver
12V power supplies (or 12VDC power supplies) are one of the most common power supplies in use today. In general, a 12VDC output is obtained from a 110VAC or 220VAC input using a combination of transformers, diodes and transistors.
SKU: CNC-194 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS LFP LifePo4 8S 24V 50A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS LFP LifePo4 8S 24V 50A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
DALY BMS 8S 24V LifePO4 PCB Protection Board with Balance Wire and Temperature Sensor for 8 3.2V Cells 24V LiFePO4 Lithium Battery Pack with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-043 -
-
Audio & Visual, Computer Interface, Modules and Breakout Boards
Mini Thermal Printer for Arduino Development Singlechip Learning
Audio & Visual, Computer Interface, Modules and Breakout BoardsMini Thermal Printer for Arduino Development Singlechip Learning
This package comes with a thermal printer including the print head (it does not require ink), a set of power and data cables, and two plastic shims for panel mounting.
The printer uses very common 2.25″ wide thermal paper, available in any office or stationery supply store. It can fit up to 50 ft of paper in the bay at once.
SKU: 1445 -
General Electronics
Foldable Portable Walking Treadmill Machine S9 Series with Larger Display
Foldable Portable Walking Treadmill Machine, S9 series new Treadmill for Home Use with Hydraulic Automatic Folding/ Unfolding system and big display screen with safety and health monitor available in Pakistan
SKU: HA-017 -
EV Parts, Mechanical, Motors and Driver
DC 48-64V 800W Brushless Motor Controller E-bike Bicycle scooter
EV Parts, Mechanical, Motors and DriverDC 48-64V 800W Brushless Motor Controller E-bike Bicycle scooter
DC Motor Controller 48V 800W Brushless DC Motor Speed Controller For Electric Bicycle E-bike Scooter Electric Bike Accessories for The battery type can be Lithium battery, Lead Acid battery etc. It can be suitable to three – wire throttle brushless DC Hub Motor under 500W.
SKU: 1698 -
Essential tools, Instruments & Tools
PVC 1.8m Anti Static ESD Wrist Strap Discharge Band Grounding Prevent Static Shock
Essential tools, Instruments & ToolsPVC 1.8m Anti Static ESD Wrist Strap Discharge Band Grounding Prevent Static Shock
- Simply wrap strap around wrist and clip to a grounded source.
- Prevent Static shock in dry environment.
- Keep static from damaging electronic parts and equipment.
- Adjustable wrist strap with alligator clip tip.
- Inner conducting layer made of stainless shell filaments.
- Durable Polyurethane Coated Coil Cords.
- High Quality Strain relief.
- Soft elastic band for comfort.
SKU: 1766 -
-
3D Printer Parts, CNC & 3D Printers
0.5mm Mk3 Brass Nozzle for 3D Printer
Buy online 0.5mm 3D Printer Brass Nozzle Accessories Mk3 in Pakistan. Electrobes has quality products for 3D printers & CNC machines. Also available in 0.2mm, 0.25mm, 0.3mm, 0.35mm, 0.4mm, 0.6mm, 0.8mm and 1.0mm.
SKU: CNC-050-1 -
Discrete Electronic Components, General Electronics
SYD1230 12mm 5mw Red CROSS LINES Laser Module
- Laser Output Type: Red CROSS-LINE Laser
- Dimensions: Diameter: 12mm, Length: 35mm.
- Weight: 15 gm.
- Wavelength: 650nm.
- Voltage: 3~6V.
- Output Power: Min 2.5mW, Typical 3.0mW, Max 5.0mW.
- Working current: Min 10mA, Typical 20mA, Max 25mA.
- Focus point Intensity can be adjusted with help of lens ring head.
SKU: 1397 -
Audio & Visual, LCD & Display
7 inch 1024 x 800 HDMI Capacitive Touch Screen LCD Display for Raspberry Pi
Audio & Visual, LCD & Display7 inch 1024 x 800 HDMI Capacitive Touch Screen LCD Display for Raspberry Pi
– 7 inch TFT touch Screen LCD Raspberry Pi Shield has a resolution of 1024 x 640 pixels.
– 7 inch standard LCD display, 1024 x 600 (Pixel), IPS screen, Full view.
– Capacitive touch screen, supports 5-point touch.
– Compatible with Raspberry Pi 4 Model B/ 3B/ B+ (Provide full image or separate driver).
– For Raspberry Pi, you can run and Ubuntu(only provide the image for Pi 4B/3B/2B).
– Compatible with BeagleBone Black and Banana Pi/Pro (Provide a full image).
– USB touch and HDMI display don’t occupy any GPIO.
– Support win7/win8/win10, No driver.
– Support backlight independent control, turn off backlight to save power.
SKU: 1404 -
-
Adapters, Batteries & Chargers
5V 20A 100W DC Universal Regulated Switching Power Supply
12V power supplies (or 12VDC power supplies) are one of the most common power supplies in use today. In general, a 12VDC output is obtained from a 110VAC or 220VAC input using a combination of transformers, diodes and transistors.
SKU: CNC-197 -
Modules and Breakout Boards, Proximity/Distance Sensors, Sensors & Transducers
PR12-4DN M12 NPN Inductive Proximity Sensor with 4mm Sensing Distance Cylinder Inductive Switch
Modules and Breakout Boards, Proximity/Distance Sensors, Sensors & TransducersPR12-4DN M12 NPN Inductive Proximity Sensor with 4mm Sensing Distance Cylinder Inductive Switch
PR12-4DN M08 NPN Inductive Proximity Sensor with 2mm Sensing Distance Cylinder Inductive Switch is an Anti Vibration, Dust, Water, Oil Prevention, Reverse Power Protection, Short Circuit Protection, Directly Connecting with PLC can Replace Small & Limit Switches.
SKU: 0961 -
Adapters, Batteries & Chargers
12V 5A 60W Switching Power Supply Driver
12V power supplies (or 12VDC power supplies) are one of the most common power supplies in use today. In general, a 12VDC output is obtained from a 110VAC or 220VAC input using a combination of transformers, diodes and transistors.
SKU: CNC-184 -
EV Parts, Mechanical, Motors and Driver
350W 24V 3000RPM High Speed Electric Bike Motor MY1016 Electric EV Balance Electric Scooter Brushed E-bike DC Motor with 11 Teeth Gear
EV Parts, Mechanical, Motors and Driver350W 24V 3000RPM High Speed Electric Bike Motor MY1016 Electric EV Balance Electric Scooter Brushed E-bike DC Motor with 11 Teeth Gear
- professional: Professional manufacturing, stable characteristics and high reliability.
- convenience: Small size, directly replace your old or damaged brake for a new one, easy to carry and store. Bike is more convenience than just a simple belly.
- affordable: High speed, low noise during operation, giving you a more comfortable and affordable driving experience.
- high speed: High speed, incredible efficiency, and low power consumption.
SKU: EB-04 -
Converters, Modules and Breakout Boards
1200W 20A DC Converter Boost Step-up Power Supply Module in 8-60V Out 12-83V with Heat Sink 12V to 24V 48V
Converters, Modules and Breakout Boards1200W 20A DC Converter Boost Step-up Power Supply Module in 8-60V Out 12-83V with Heat Sink 12V to 24V 48V
- Input voltage :10-60V
- Output voltage: 12-83V (adjustable)
- Output Current: 12A
- Input Current: 20A
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
SKU: 1771 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 7S 24V 20A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 7S 24V 20A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS Li-ion 7S 24V 20A BMS Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-022 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
RCWL-0516 Doppler Radar Microwave Sensor Module Human Induction Detector Switch
General Sensors, Modules and Breakout Boards, Sensors & TransducersRCWL-0516 Doppler Radar Microwave Sensor Module Human Induction Detector Switch
This mini doppler radar sensor module is equipped with supporting DC 4-28V wide voltage This is a mini radar motion sensor module is equipped with RCWL-9196 chip based on the doppler microwave induction technology. It will automatically comtinuously output the high level TTL signel when there is motion. 360 degree no blind angle detection and maximum 7m sensoring distance with adjustable delay time and sensitivity. It is perfect for DIY microwave motion sensor light switch, human sensor toys, smart security devices, etc.
SKU: 0761 -
-
Arduino Shield, Compatibles for Arduino, Modules and Breakout Boards
USB Host Shield Rev 2.0 for Arduino
Arduino Shield, Compatibles for Arduino, Modules and Breakout BoardsUSB Host Shield Rev 2.0 for Arduino
- Version: 1.0
- Compatible Mainboard
- Leaf maple
- Arduino Deumlanove/UNO
- Arduino MEGA
- ChipKit MAX32
- ChipKit UNO32
- FEZ Panda II
- Freeduino
- Iteadmaple
- Iteaduino
- Iteaduino ADK
- Iteaduino BT
- Iteaduino MEGA 2560
- Simple Cortex
- Seeeduino
- Seeduino MEGA
- Functions: Adapter
- Operation Level: Digital 3.3V, 5V
SKU: 0104 -
Accessories, Batteries & Chargers
Handheld Portable DIY Spot Welder Mini Spot Welding Machine With Quick Release Pen Nickel Plate 18650 Battery Spot Welder DH20 Pro+
-22%
Accessories, Batteries & ChargersHandheld Portable DIY Spot Welder Mini Spot Welding Machine With Quick Release Pen Nickel Plate 18650 Battery Spot Welder DH20 Pro+
Handheld Portable DIY Spot Welder Mini Spot Welding Machine With Quick Release Pen Nickel Plate 18650 Battery Spot Welder DH20 Pro+. Buy in Pakistan
SKU: 1579 -
Robotics & Machines, Stepper Motors & Drivers
DRV8825 Stepper Motor Driver Soldered Pins with Heat Sink
-27%
Robotics & Machines, Stepper Motors & DriversDRV8825 Stepper Motor Driver Soldered Pins with Heat Sink
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 micro stepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of the A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
SKU: 0752 -
-
3D Printers, CNC & 3D Printers
TRONXY X5SA Metal 3D Printer Square Core XY Structure Dual Z Axis Stable Large
-16%
3D Printers, CNC & 3D PrintersTRONXY X5SA Metal 3D Printer Square Core XY Structure Dual Z Axis Stable Large
2020 Newest Upgraded Tronxy 3D printer X5SA-400/X5SA Larger print size 3.5 inch TFT Touch Screen PLA ABS Filament
Main Features:
● High printing precision ( Z axis: 0.004mm, XY axis: 0.012mm )
● X axis and Y axis belt adjustable function
● Use high speed track wheels to ensure fast print
● Print speed: 20 – 150mm/s
● Use aluminium profile, durable and wearing-resisting
● USB and SD card supported, meet different demands
● Operating system: XP, WIN7, MAC
● Working environment: – 5 to 40 degree centigrade, humidity: 20 to 80 percentSKU: TDP-025 -
Modules and Breakout Boards, Wireless Communication
UBLOX NEO-6M V2 GPS Module for Arduino Raspberry Pi
-58%
Modules and Breakout Boards, Wireless CommunicationUBLOX NEO-6M V2 GPS Module for Arduino Raspberry Pi
Buy online UBLOX NEO-6M V2 GPS MODULE in Pakistan. UBLOX NEO-6M GPS Module has a battery for power backup and EEPROM for storing configuration settings. The Ublox GPS module has serial TTL output.
SKU: 1081 -
Modules and Breakout Boards
CH340 USB to TTL (Serial) HW 597 Converter Module
A simple USB to serial converter with selectable voltage through a jumper. Specifications:
- 3.3V-5V TTL voltages
- Converts TTL logic levels to computer RS232 levels
- Power supplies: 5V, 3.3V, GND (min)
- RX (3.3V-5V)
- TX (3.3V-5V)
SKU: 0751 -
Consumer Electronics, EV Parts
48V-72V Universal Electric Bicycle Scooter Speedometer Odometer LED Dash Display
Consumer Electronics, EV Parts48V-72V Universal Electric Bicycle Scooter Speedometer Odometer LED Dash Display
Analog Odometer Power Meter Speedo Meter Instrument for Electric Tricycle, Motorcycle, Scooter, E-kart, Electric rikshaw and electric bicycle etc. We have all items required for electric scooter in stock. You can also get other related components like BLDC motor, speed controller and switches at electrobes-com-827299.hostingersite.com at cheaper price in Pakistan.
SKU: EB-03 -
Discrete Electronic Components, ICs, Logic Gates
74LS10 Tripple 3 input NAND Gate IC
- Operating voltage range: +4.75 to +5.25V
- Recommended operating voltage: +5V
- Maximum supply voltage:7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Typical Rise Time: 18ns
- Typical Fall Time: 18ns
- Operating temperature:0°C to 70°C
- Storage Temperature: -65°C to 150°C
SKU: 0407 -
CCTV and IP Cameras
IP Wireless V380 Panoramic Light Bulb Camera 960P HD
- 360 degrees panoramic view.
- Support Motion detection.
- Advanced e-PTZ on split video.
- Simultaneous multi H.264 streams support.
- iPhone and Android apps available for remote viewing.
- Free client software.
- Plug & Play smart access without IP setting via routers.
- Support paging browsing, automatic round tour.
- Support digital zoom on preview & playback.
- Very easy for operation & installation.
- It can be used on many occasions, Baby Monitor, Elderly Care, Small Store Management and Room Surveillance.
- 360 degrees panoramic view.
- Support Motion detection.
- Advanced e-PTZ on split video.
- Simultaneous multi H.264 streams support.
- iPhone and Android apps available for remote viewing.
- Free client software.
- Plug & Play smart access without IP setting via routers.
- Support paging browsing, automatic round tour.
- Support digital zoom on preview & playback.
- Very easy for operation & installation.
- It can be used on many occasions, Baby Monitor, Elderly Care, Small Store Management and Room Surveillance.
SKU: CAM-004 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 13S 48V 50A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 13S 48V 50A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS Li-ion 13S 48V 50A BMS Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-010 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
SR-04 Ultrasonic Distance Measuring Sensor Module
General Sensors, Modules and Breakout Boards, Sensors & TransducersSR-04 Ultrasonic Distance Measuring Sensor Module
The HC-SR04 Ultrasonic Sensor Module is a popular and versatile distance measuring device that utilizes ultrasonic waves to determine the distance between itself and an object. Widely used in robotics, automation, and various electronic projects, this sensor offers reliable performance and ease of use. Buy online in Pakistan.
SKU: 0135 -
Modules and Breakout Boards, Robotics & Machines, Stepper Motors & Drivers
L298N H-Bridge Motor Driver Module
Modules and Breakout Boards, Robotics & Machines, Stepper Motors & DriversL298N H-Bridge Motor Driver Module
The L298 motor driver module features:
- Finned Aluminum Heatsink for the L298 IC
- Clamping Rectifiers
- Filter Capacitors for logic-power and moto-power busses
- Onboard 5-Volt DC Regulator (A jumper selects between external 5-Volt power or the onboard 5-volt regulator.)
- Screw Terminal connections for ground, motor power, 5-volt power, and motor outputs
- 0.1 inch-pitch header pins for logic inputs
- Jumpers to tie the enable inputs to ground (if desired)
- Switches up to 2 amps per channel
SKU: 0753 -
Gas Sensors, Modules and Breakout Boards, Sensors & Transducers
MQ-4 Methane/ Natural Gas Sensor Module for Arduino
Gas Sensors, Modules and Breakout Boards, Sensors & TransducersMQ-4 Methane/ Natural Gas Sensor Module for Arduino
- Good sensitivity to Combustible gas in wide range
- High sensitivity to CH4, Natural gas.
- Small sensitivity to alcohol, smoke.
- Fast response Stable and long life
- Simple drive circuit
SKU: 0128 -
-
Instruments & Tools, Meters
Digital Mini Thermometer Temperature Meter Display with Probe
- Digital mini lcd thermometer
- Temperature range: -50~ 110°c, temperature measurement accuracy:±1°c
- Sensor cable length: 1 meter
- Batteries: Lr44 coin cell (easily available) (battery included in this product)
SKU: 1429 -
-
Discrete Electronic Components, ICs, Logic Gates
74LS07 HEX Buffers/Drivers with Open-Collector Gate IC
Discrete Electronic Components, ICs, Logic Gates74LS07 HEX Buffers/Drivers with Open-Collector Gate IC
- Supply voltage range: +4.75V to +5.25V
- Maximum supply voltage: +7V
- Maximum current allowed to draw through each gate output: 8mA
- Totally lead free
- TTL outputs
- MaximumRise Time: 15ns
- Maximum Fall Time: 15ns
- Operating temperature:0°C to 70 °C
SKU: 0405 -
Mechanical, Motors and Driver
12V DC Small Speed Reduction Gear Motor Metal With 65mm Wheel
Silver 25GA370 DC Gear-Box Reducer Electric Motor with Wheel, coupler, mount and screws robotic car wheel complete kit to be mounted directly on a 2wd and 4wd chassis used in line following robot, obstacle avoidance car, driver less robotic car, automatic surveillance robotic vehicle. You can get this product at best price in Pakistan.
SKU: 1756 -
3D Printers, CNC & 3D Printers, FDM 3D Printers
Elegoo Neptune 3 Plus FDM 3D Printer Dual-Gear Direct Extruder 320x320x400mm Larger Bed Size
-20%
3D Printers, CNC & 3D Printers, FDM 3D PrintersElegoo Neptune 3 Plus FDM 3D Printer Dual-Gear Direct Extruder 320x320x400mm Larger Bed Size
Elegoo Neptune 3 Plus FDM 3D Printer with 32-bit Silent Motherboard, Auto bed leveling, Dual-Gear Direct Extruder, 320x320x400 Larger Bed Volume 3D Printing Machine at best price online in Pakistan
SKU: TDP-005 -
-
-
Converters, Modules and Breakout Boards
CP2102 USB 2.0 to TTL UART 6PIN Serial Converter
CP2102 chip from SiLabs is a single chip USB to UART bridge IC. It requires minimal external components. CP2102 can be used to migrate legacy serial port based devices to USB. Hobbyists can use it as a powerful tool to make all kinds of PC interfaced projects. This module help all those who are comfortable with RS232/Serial Communication protocol, to build USB devices very easily.
SKU: 0617 -
Motor and Gears, Robotics & Machines
JGB37-550 DC 12V 680RPM High Torque Metal Gear DC Motor
DC 12V 680 RPM High Speed Large Torque Motor has stable and reliable performance. It is very easy to disassemble, clean and maintain. Highlighted feature of this module is excellent quality and long service life. It is micro, compact and light weight. This motor is high-speed and high-power, and is generally powered by a lithium battery. This DC motor can save electricity to a great extend. Environmental protection is the another inevitable feature of this DC motor. The sound at DC 12V is relatively loud, because the motor itself has a fan, coupled with high speed, the motor’s own no-load current is 1.25 A, so the noise is reasonable, but the torque of this motor is very strong. At the same speed, its torque should be more than twice that of the ordinary 555 geared motor.
SKU: 1198 -
Robotics & Machines, Stepper Motors & Drivers
Nema17 12-24V High Torque Stepper motor 1.8/step 4 Wire (New)
Robotics & Machines, Stepper Motors & DriversNema17 12-24V High Torque Stepper motor 1.8/step 4 Wire (New)
NEMA17 4 Wire Bipolar Stepper Motor NEMA17 Stepper Motor NEMA 17 Stepper Motors very useful in the various application especially which demands low speed with high precision Many machines such as 3D Printers CNC Router and Mills Camera Platforms XYZ Plotters etc Nema17 4 wire Bipolar Stepper.
SKU: CNC-262 -
Essential tools, Instruments & Tools
Lt-86C Magnifying Glass Desk Lamp 5x Magnification lamp with Large Glass 120mm Diameter
Essential tools, Instruments & ToolsLt-86C Magnifying Glass Desk Lamp 5x Magnification lamp with Large Glass 120mm Diameter
- Fully adjustable arm: this convenient design measures 17.7in.x18in., the durable, slender pole pivotes easily in any direction, bringing light exactly where you need it
- Super bright reading and task lamp: designed for aging eyes, this professional-quality LED magnifying lamp has a 5 in. Dia lens that is made of standard green glass
- High-quality SMD LEDs: this lamp has 30 energy-saving SMD LEDs that are guaranteed to last, the low voltage saves your money on electricity and like most LEDs these SMDs give off almost no heat
- Powerful 5 in. lens: the powerful lens magnifies objects 1.75 times or 2.25 times or 3 times (for options), bringing focus and clarity to reading and watching in lab or cleanroom
SKU: 1315 -
General Electronic Boards, Modules and Breakout Boards
15A 400W MOSFET Trigger Switch Driver Module
The board is of high power MOS trigger switch driver module and control board with field-effect tube to adjust the electronic switch. It adopts imported double MOS parallel active output to show lower internal resistance, greater electric current and power.
Besides it works at 15A,400W under common temperature which satisfies most devices usage and realizes the control of great power devices in a relaxed way.SKU: 0743 -
Breadboards, Protoboards & PCBs, Discrete Electronic Components
9cm x 15cm Double Sided FR4 Fiber Glass Dotted Veroboard
-22%
Breadboards, Protoboards & PCBs, Discrete Electronic Components9cm x 15cm Double Sided FR4 Fiber Glass Dotted Veroboard
9 x 15cm Double Sided FR4 Fiber Glass Dotted Veroboard Printed Circuit Board PCB Board with Copper Thickness 2oz, Total PCB thickness 16mm & Tolerance 10% Single Sided. This board is Ink resistant. Suitable etchants Ferric Chloride or Fine Etch crystals. Buy online in Pakistan at Electrobes.
SKU: 1543 -
-
Automation Gadgets
S608 Waterproof IP65 Smart Handle Door Automatic Lock with RFID, Pin, Key and Biometric Verification System for Home Office Security
-7%
Automation GadgetsS608 Waterproof IP65 Smart Handle Door Automatic Lock with RFID, Pin, Key and Biometric Verification System for Home Office Security
- Multiple methods to open
- No Wiring Required
- Easy Clip-on installation, for standard glass doors, no need to drill holes for installation
- Universal Left Open , Right open dual support
- Model S608
- Used for doors upto 30-55mm Thickness
SKU: HA-008 -
-
General Sensors, Modules and Breakout Boards, Sensors & Transducers
MAX9814 Auto Gain Control Stable Microphone Amplifier
General Sensors, Modules and Breakout Boards, Sensors & TransducersMAX9814 Auto Gain Control Stable Microphone Amplifier
Buy online MAX9814 Auto Gain Control Stable Electric Microphone Amplifier in Pakistan. Supply Voltage: 2.7v-5.5v @ 3mA current, Low THD: 0.04% (typ). Output: 2Vpp on 1.25V bias.
SKU: 0118 -
Consumer Electronics
Model Cutting Pad Plate A4 Size Scale Plate Self Healing Cutting Plate For Painting Engraving Rubber Stamp Hand Carving Tools
Consumer ElectronicsModel Cutting Pad Plate A4 Size Scale Plate Self Healing Cutting Plate For Painting Engraving Rubber Stamp Hand Carving Tools
Cutting Mat A4 300x220mm PVC Cutting Mat Double Sided Self Healing PVC Printed Grid Lines Cutting Board Fabric Leather Cut Paper Office Stationery Craft DIY Cutting Art Hobby Patchwork Thick Non-Slip Tools
SKU: 1763 -
-
-
Discrete Electronic Components, General ICs, ICs
LM339 VOLTAGE COMPARATOR IC
- Operating voltage range: +4.75 to +5.25V
- Recommended operating voltage: +5V
- Maximum supply voltage:7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Typical Rise Time: 18ns
- Typical Fall Time: 18ns
- Operating temperature:0°C to 70°C
- Storage Temperature: -65°C to 150°C
SKU: 0422 -
IOT Development Board, Modules and Breakout Boards
RC832 Receiver and TS832 Transmitter 32Ch 5.8G 600mW Wireless AV for FPV
IOT Development Board, Modules and Breakout BoardsRC832 Receiver and TS832 Transmitter 32Ch 5.8G 600mW Wireless AV for FPV
Buy online RC832 Receiver+TS832Transmitter 32Ch 5.8G 600MW Wireless AV for FPV in Pakistan. 600mW transmitter power assure 5KM distance in open area, 5-8 KM is available if work with the bigger gain antenna.
SKU: 1158 -
-
Heat Sinks
Heat Sink Aluminium made Self Adhesive Complete Set for Raspberry Pi
A complete set of heats sinks for Rapsberry pi, which provide coolant facility to Raspberry Pi. It is made of Pure Copper for better performance. The fins increase the area of the board and thus provide for greater heat transfer.
SKU: 0900 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
5.8GHZ Microwave Radar Sensor Module XYC-WB-DC Smart Sensoring Switch 6-9M
-9%
General Sensors, Modules and Breakout Boards, Sensors & Transducers5.8GHZ Microwave Radar Sensor Module XYC-WB-DC Smart Sensoring Switch 6-9M
It uses Doppler radar technology, With the ability to automatically sensing to control another product, high sensitivity, sensor distance, reliability, wide-angle sensor, wide voltage range and other characteristics. Widely used in lighting conditions, anti-theft alarm is available online at electrobes-com-827299.hostingersite.com in Pakistan.
SKU: 0133 -
-
-
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
24V 6S 40A 18650 Li-Ion Lithium Battery Protection Board Solar Lighting BMS PCB with Balance Charging for E-bike Scooter
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards24V 6S 40A 18650 Li-Ion Lithium Battery Protection Board Solar Lighting BMS PCB with Balance Charging for E-bike Scooter
BMS (Battery Management System) – a battery management system designed to monitor the status of batteries, control the process of charging/discharging the battery, etc.
Six batteries (18650) can be connected simultaneously to this charge-discharge controller module. The module has protection against short circuits, overcharge and over-discharge. One of the functions of the charge controller is to turn off the power supply for the batteries when the maximum capacity of at least one battery is reached. This BMS controller is designed for more than 30,000 hours of operation. The maximum allowable current is 40 A.
If the maximum permissible value of the supply voltage is exceeded, the charge controller activates the “protection” mode. In order to restore the module, it is necessary to re-apply voltage to the input of the BMS board or wait a while until the charge controller automatically disables protection.
SKU: 1722 -
Discrete Electronic Components, Resistors, Surface Mount Resistors
1K Ohm 102 0603 SMD Resistor Network Array
Discrete Electronic Components, Resistors, Surface Mount Resistors1K Ohm 102 0603 SMD Resistor Network Array
Specification Value Resistance Value 1KOhm Power Rating 1/8W Power Rating per Resistor 1/16W Number of Resistors 2 Family 742 Type Array Circuit Designator ISOL Number of Terminals 4 Technology Thick Film Temperature Coefficient 200ppm/°C Terminal Pitch 0.8mm Termination Style Concave Tolerance 5% Minimum Operating Temperature -55°C Maximum Operating Temperature 125°C Mounting Surface Mount Packaging Tape and Reel Case Size 0606 Case Size per Element 0603 Case Style Molded Package/Case 0606(2 X 0603) Product Depth 1.6mm Product Height 0.6mm Product Length 1.6mm SKU: 0295 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
20Kg Scale Bar Load Cell Weight Sensor
General Sensors, Modules and Breakout Boards, Sensors & Transducers20Kg Scale Bar Load Cell Weight Sensor
This straight bar load cell (sometimes called a strain gauge) can translate up to 20kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.
SKU: 0949 -
Audio & Visual, LCD & Display
2.4 Inch ILI9341 Touchscreen TFT LCD Display Screen Shield Module For Arduino UNO R3 Board
-20%
Audio & Visual, LCD & Display2.4 Inch ILI9341 Touchscreen TFT LCD Display Screen Shield Module For Arduino UNO R3 Board
- Color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor).
- Composed of a color TFT-LCD panel, driver IC, FPC and a back light unit. The module display area contains 320 x 240 pixels.
- The screen uses analog pins A0-A4 for LCD control and touch screen operations, which are in the same position on the UNO and the Mega, so the touch screen should work without any modification.
- The shield comes equipped with a micro SD card reader for easy access to use a software-based SPI library.
- Compatible with Arduino UNO R3 Mega2560 DUE.
SKU: 0177 -
-
3D Printer Filaments, CNC & 3D Printers
SUNLU ABS 1.75mm 1KG 3D Printer Filament
SUNLU ABS Filament is a material used by 3D printers that uses 1.75mm of filament, available at Electrobes in Pakistan. The SUNLU ABS filaments comes in various colors that we hold in our stock . This ABS Filament has weight of 1Kg/roll.
SKU: PF-031 -
3D Printers, CNC & 3D Printers, FDM 3D Printers
Artillery Sidewinder X3 Pro 3D Printer 240x240x260mm Bed Size
3D Printers, CNC & 3D Printers, FDM 3D PrintersArtillery Sidewinder X3 Pro 3D Printer 240x240x260mm Bed Size
- Print Size – 240*240*260mm
- Faster 3D Printing: Max Speed 300mm/s
- 300°C High Temp 3D Printing: Support more materials
- Cable design: Integrated FFC cable design
- PEI Magnetic Platform – Easy to remove
- Axis dual lead screw + dual motor
SKU: TDP-037 -
Planes And Copters, Robotics & Machines, Wireless Communication
TS5828 Micro 5.8G 600mW 40CH FPV Transmitter with Digital Display and FPV 1500TVL /1200TVL Camera Receiver UVC for FPV Drone
Planes And Copters, Robotics & Machines, Wireless CommunicationTS5828 Micro 5.8G 600mW 40CH FPV Transmitter with Digital Display and FPV 1500TVL /1200TVL Camera Receiver UVC for FPV Drone
Buy TS5828 5.8G Micro 40-CH FPV Video Transmitter AV in Pakistan. This is the newest version, add auto sweep and match frequency, graphical interface, snow screen 0.1s delay.
SKU: 0894 -
Instruments & Tools, Meters
UNI-T UT207B Digital Clamp Meter AC Current Ammeter Multimeter
UNI-T Digital Clamp Meter UT207B Inrush Current AC/DC 1000A True RMS HVAC Volt Amp Ohm Meter Clamp On Multimeter Auto Ranging 6000 Counts, Frequency AC DC Voltage LPF ACV Capacitance Duty Cycle Tester at best price in Pakistan
SKU: DM-006 -
Adapters, Batteries & Chargers
5V 30A 150W Switching Power Supply Driver
12V power supplies (or 12VDC power supplies) are one of the most common power supplies in use today. In general, a 12VDC output is obtained from a 110VAC or 220VAC input using a combination of transformers, diodes and transistors.
SKU: CNC-195 -
Instruments & Tools, Meters
UNI-T UT203+ Digital Clamp Meter AC DC Ammeter Multimeter
Digital clamp meter UNI-T UT203+ is a reliable and low consumption clamp multimeter. Digital clamp meter UNI-T UT203+ measures AC/DC voltage and current, resistance, frequency, duty cycle, also performing diode check and continuity test. This clamp meter has overload protection.
SKU: DM-007 -
-
3D Printers, CNC & 3D Printers, DLP/SLA/Resin 3D Printer, Resin
Creality HALOT-MAGE PRO 8K Resolution Resin 3D Printer
3D Printers, CNC & 3D Printers, DLP/SLA/Resin 3D Printer, ResinCreality HALOT-MAGE PRO 8K Resolution Resin 3D Printer
Creality Resin 3D Printer HALOT-MAGE PRO, 170mm/h High-Speed Printing, 3D Resin Printer with 8K High Precision 10.3″ LCD Screen and High-Precision Integral Light, Large Printing Size 8.97×5.03×9.05 in at best price online in Pakistan.
SKU: TDP-035 -
3D Printer Filaments, CNC & 3D Printers
SUNLU TPU 1.75mm Flexible 3D Printer Filament 95A Shore Hardness 0.5kg Roll
3D Printer Filaments, CNC & 3D PrintersSUNLU TPU 1.75mm Flexible 3D Printer Filament 95A Shore Hardness 0.5kg Roll
SUNLU 500g/roll TPU filament is made of all flexible materials that can be bended easily, compact and portable. High quality TPU filament adopts the most advanced and soft imported cork, with excellent heat dissipation performance.
SKU: PF-036 -
Discrete Electronic Components, General Electronics
4×4 Matrix 16 Keypad Keyboard Module 16 Button for Arduino
Discrete Electronic Components, General Electronics4×4 Matrix 16 Keypad Keyboard Module 16 Button for Arduino
- 4×4 Matrix Keyboard Module with 16 buttons
- Small in size and hence Save space
- More convenient to use
- Expanded development application modules for single chip
- With 16 keys and 8 pin
SKU: 1046 -
CNC & 3D Printers, CNC Machines
Twotrees CNC Vacuum Cleaner Monster (M1) Kit with Built-in Filter Cotton
CNC & 3D Printers, CNC MachinesTwotrees CNC Vacuum Cleaner Monster (M1) Kit with Built-in Filter Cotton
- With automatic start/stop function, LED light on the suction door for easy observation of the engraving effect of the material at night, vacuum cleaner with negative ion generator (air purification)
- The vacuum cleaner motor adopts a brushless motor with a maximum speed of 50,000 revolutions per minute, which is highly efficient in vacuuming and increases the service life.
- The vacuum cleaner has a transparent bottom tray, which allows you to easily see if the dust bag is full or not
- The dust bag is closed with a zipper, which facilitates the emptying of the crumbs and increases the reuse rate; the capacity of the bag is 2.8 liters
- The set has a long and flat dust cover. When the machine is not in use, the vacuum cleaner can also be used as a household vacuum cleaner to easily clean the countertop.
SKU: CNC-326 -
IOT Development Board, Modules and Breakout Boards, Robotics, Robotics & Machines, Wireless Communication
Mini Satellite Receiver 2.4G 6 Channel Compatible with Spektrum AR6200
IOT Development Board, Modules and Breakout Boards, Robotics, Robotics & Machines, Wireless CommunicationMini Satellite Receiver 2.4G 6 Channel Compatible with Spektrum AR6200
Buy online Mini Satellite Receiver 2.4G 6 Channel Compatible with Spektrum AR6200 in pakistan. A great solution for all model aircraft requiring full range up to six channels.
SKU: EW-005 -
CNC & 3D Printers, CNC Machine Parts
MACH3 Engraving Machine CNC 5-Axis Stepper Motor Driver Board
CNC 5 Axis Stepper Motor Driver Interface Board With USB Cable Optocoupler Isolation For MACH3 Engraving Machine. fully support MACH3 and other computer software that supports parallel port control.
SKU: CNC-086 -
Consumer Electronics
180 Degree AC 85-265V Motion Detector Outdoor Wall Surface Mounting Motion Sensor
Consumer Electronics180 Degree AC 85-265V Motion Detector Outdoor Wall Surface Mounting Motion Sensor
This is a 220V AC human infrared sensors, pyroelectric infrared technology, the use of industrial district-level chip, intelligent control, set energy saving, convenient and environmentally friendly one, very convenient. This module also comes in 12V DC variant.
SKU: 1802 -
