[vc_row][vc_column]
-
Planes And Copters, Robotics & Machines
Microzone MC6C Mini Upgraded 6 Channel 2.4 GHz Radio Remote Control for Transmitter & Receiver RC Quadcopter
Planes And Copters, Robotics & MachinesMicrozone MC6C Mini Upgraded 6 Channel 2.4 GHz Radio Remote Control for Transmitter & Receiver RC Quadcopter
The Microzone MC6C radio remote control is a simple, easy-to-use system that performs as well as working speed and range. Ideal for new riders or as an entry point into the Hobby, the MC6C can do whatever an RC pilot needs to become. If you want to buy in Pakistan at best price in the market, electrobes is the place to get it. This receiver supports PWM and SBUS and has an external antenna (unlike the previous model).
SKU: RC-010 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
MAX30100 Heart Rate Oxygen Pulse Breakout Sensor Module For Arduino
General Sensors, Modules and Breakout Boards, Sensors & TransducersMAX30100 Heart Rate Oxygen Pulse Breakout Sensor Module For Arduino
The MAX30100 is an integrated pulse oximetry and heart-rate monitor module. It includes internal LEDs, photodetectors, optical elements, and low-noise electronics with ambient light rejection.
SKU: 1481 -
-
Discrete Electronic Components, ICs, Logic Gates
74LS83 FULL ADDER 4-Bit Binary with fast Carry IC
- Operating voltage range: +4.75 to +5.25V
- Recommended operating voltage: +5V
- Maximum supply voltage:7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Typical Rise Time: 18ns
- Typical Fall Time: 18ns
- Operating temperature:0°C to 70°C
- Storage Temperature: -65°C to 150°C
SKU: 0416 -
EV Parts, Mechanical, Motors and Driver
24V 250W Motor Controller Electric Bike Kit Electric Bicycle Conversion Kit For 20-28″ Electric Bicycle
-28%
EV Parts, Mechanical, Motors and Driver24V 250W Motor Controller Electric Bike Kit Electric Bicycle Conversion Kit For 20-28″ Electric Bicycle
- Environmentally friendly material, durable and easy to operate.
- This kit is suitable for installation on regular bicycles of 22-28 inches.
- This kit is not suitable for modification in special models and variable speed models.
- Motor use freewheel so when wheel rotating, the motor will not rotate, just like a normal bike, this can reduce resistance.
- This item doesn’t include battery or charger.
SKU: EB-05 -
Discrete Electronic Components, ICs, Power Optimizer & Circuit Protection
0.5A 6V TO-252 SMD Voltage Regulator 78M06
Discrete Electronic Components, ICs, Power Optimizer & Circuit Protection0.5A 6V TO-252 SMD Voltage Regulator 78M06
Voltage regulators are very common in electronic circuits. They provide a constant output voltage for a varied input voltage. In our case the 78M06 IC is an iconic regulator IC that finds its application in most of the projects to regulate variable voltages to a fixed 6V output. This IC is the TO-252 case of 7806 IC to be used on SMD circuits.
SKU: 0884 -
Robo Cars & Trucks, Robotics & Machines
Arduino 2WD Smart Robotics Robot Car Chassis Kit with DC Motor Set
Robo Cars & Trucks, Robotics & MachinesArduino 2WD Smart Robotics Robot Car Chassis Kit with DC Motor Set
2WD Smart Robotics Robot Car Chassis Kit with DC Motor Set, 2 wheels, 1 caster wheel and transparent chassis i-e perfect for your Arduino based Robotic car projects, line following robot, obstacle avoidance robot etc. Buy in Pakistan
SKU: 0715 -
Discrete Electronic Components, General ICs, ICs, Logic Gates
CD4093B MC14093B Quad 2-input Nand Schmitt Trigger MOS P−channel and N−channel
Discrete Electronic Components, General ICs, ICs, Logic GatesCD4093B MC14093B Quad 2-input Nand Schmitt Trigger MOS P−channel and N−channel
CD4093/MC14093B quad 2−input NAND gate Schmitt trigger is constructed with MOS P-channel and N-channel enhancement mode devices in a single monolithic structure. The CD4093B may be used in place of the CD4011B for enhanced noise immunity or to “square up” slowly changing waveforms.
SKU: 0855 -
3D Printer Parts, CNC & 3D Printers, Mechanical, Motors and Driver
Motor Dual Z Stepper Motor Parallel Module Stepping Motor Board With Cable For 3D Printer Kit
3D Printer Parts, CNC & 3D Printers, Mechanical, Motors and DriverMotor Dual Z Stepper Motor Parallel Module Stepping Motor Board With Cable For 3D Printer Kit
This module is only used for motor-side parallel, a driver drives two motors. And only for mini printers or small current motors in parallel (with the same motor in parallel, the current are divided evenly).
SKU: CNC-134 -
Audio & Visual, LCD & Display
NEXTION 7.0” Intelligent LCD Touch Display Module NX8048P070-011R Multifunction HMI Resistive Touch
Audio & Visual, LCD & DisplayNEXTION 7.0” Intelligent LCD Touch Display Module NX8048P070-011R Multifunction HMI Resistive Touch
The NEXTION 7.0” Intelligent LCD Touch Display Module NX8048P070-011C/C Multifunction HMI Capacitive Touch is a Seamless Human Machine Interface (HMI) display module solution that provides a control and visualization interface for any Raspberry Pi and Arduino kits. Nextion is mainly applied to lot or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube, and, it is best intelligent display module on the market.
SKU: 1321 -
Robotics & Machines, Stepper Motors & Drivers
TB6560 3A Single Axis Controller Stepper Motor Driver
Tb6560 stepper motor driver best price Pakistan 3A Single-Axis CNC Router Stepper Motor Driver Board is based on TB6560AHQ chip. It will significantly increase torque and ease of configuration of larger motors. Cheap and great driver for CNC or 3D printer.
SKU: 0758 -
Hardware, Instruments & Tools
JCTOP EW4065 Precise Wire Stripper/Cutter Tool Clamp & Steel Wire Cable Cutter Plier Stripping Tool 10-18AWG
Hardware, Instruments & ToolsJCTOP EW4065 Precise Wire Stripper/Cutter Tool Clamp & Steel Wire Cable Cutter Plier Stripping Tool 10-18AWG
TNI-U TU-2022 is a Precise gear grinding wire stripper / line clamp / wire cutter / plier. It is the simplest and fastest way to strip plastic or rubber insulation of single, multiple cables and wires. You just need to insert a wire into the jaws and squeeze the handles, now you’re finished.
SKU: 1195 -
IOT Development Board, Modules and Breakout Boards, Robotics, Robotics & Machines, Wireless Communication
Mini Satellite Receiver 2.4G 6 Channel Compatible with Spektrum AR6200
IOT Development Board, Modules and Breakout Boards, Robotics, Robotics & Machines, Wireless CommunicationMini Satellite Receiver 2.4G 6 Channel Compatible with Spektrum AR6200
Buy online Mini Satellite Receiver 2.4G 6 Channel Compatible with Spektrum AR6200 in pakistan. A great solution for all model aircraft requiring full range up to six channels.
SKU: EW-005 -
Instruments & Tools, Meters
UNI-T UT136C+ Digital Multimeter Voltage Current Capacitance and Temperature Meter
Instruments & Tools, MetersUNI-T UT136C+ Digital Multimeter Voltage Current Capacitance and Temperature Meter
The new generation of UT136+ series digital multimeter has an innovative industrial design which ensures that the product can withstand a drop of 2 meters height. Large LCD screen provides a clear display and its 4 times/second sampling rate provides users with more accurate readings. UT136+ series is designed to work safely in CAT II1000V/CAT III 600V environment.
SKU: DM-016 -
Adapters, Batteries & Chargers
48V 10A 480W Switching Mode Power Supply SMPS Adapter
48V power supplies (or 48VDC power supplies) are one of the most common power supplies in use today. In general, a 48V DC output is obtained from a 110VAC or 220VAC input using a combination of transformers, diodes and transistors.
SKU: CNC-224 -
Analog, Discrete Electronic Components, ICs
CD4017 Decade Counter Divider IC with 10 Decoded Outputs
- The supply voltage of this IC is 3V to 15V.
- It is compatible with TTL (Transistor-Transistor Logic).
- The clock speed or operational speed of CD4017 IC is 5 MHz
- 5-stage Divide-by-10 Johnson Counter with 10 Decoded Outputs and a Carry Bit
- Medium Speed up to 5MHz
- Operating Temperature to 85°C.
SKU: 0412 -
Modules and Breakout Boards, STM Boards
STM32F303 Discovery Evaluation Development Board
The STM32F3DISCOVERY is a discovery kit based on STM32F303VCT6 microcontroller with 256KB flash, 48KB RAM. The STM32F303VCT6 is based on the high performance ARM Cortex-M4 32bit RISC core with FPU operating at a frequency of up to 72MHz and embedding a floating point unit (FPU), a memory protection unit (MPU) and an embedded trace macrocell (ETM). The STM32F3DISCOVERY helps to discover the STM32F3 series Cortex-M4 mixed signals features and to develop our applications easily.
SKU: 1323 -
Instruments & Tools, Meters
Digital Mini Thermometer Temperature Meter Display with Probe
- Digital mini lcd thermometer
- Temperature range: -50~ 110°c, temperature measurement accuracy:±1°c
- Sensor cable length: 1 meter
- Batteries: Lr44 coin cell (easily available) (battery included in this product)
SKU: 1429 -
-
Essential tools, Instruments & Tools
SR-04 Ultrasonic Sensor Mounting Bracket Colored
- Thickness: 2.8 – 3.1 mm
- Inner diameter: 16 mm
- Fixing Hole Diameter: 3.8 mm
- Material: High Quality Imported Acrylic
- Colour: Blue
- Application: Stationary ultrasonic sensor modules and other products
Package Contents:
1 x Ultrasonic Mount Bracket for HC-SR04 Ultrasonic Module
SKU: 0131 -
Robotics & Machines, Servos & Controllers
Tower Pro MG996R Metal Gear Micro Servo Motor 180 Degree
MG996R Metal Gear Micro Servo Motor with a maximum torque of 11 kg/cm rotates from 0 to 180 degree based on the duty cycle of the PWM. Buy online in Pakistan. Also available in 360 degree rotation.
SKU: 1613 -
3D Printers, CNC & 3D Printers
Anycubic Kobra 3 Max FDM 3D Printer, 420x420x500mm Largest Bed Size, 600mm/s High Speed 3D Printer
3D Printers, CNC & 3D PrintersAnycubic Kobra 3 Max FDM 3D Printer, 420x420x500mm Largest Bed Size, 600mm/s High Speed 3D Printer
● The Largest Consumer-Grade Multicolor 3D Printer
● 420*420*500mm Print Volume
● Support Latest ACE PRO Flawless 8-Color Printing
● Precise Auto-Leveling & Anti-Step Lost
● Filament Box with Drying Capability
● 600mm/s High-Speed Printing
● Anycubic Slicer Next & Anycubic App UpgradeSKU: TDP-074 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
10Kg Scale Bar Load Cell Weight Sensor
General Sensors, Modules and Breakout Boards, Sensors & Transducers10Kg Scale Bar Load Cell Weight Sensor
This straight bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.
SKU: 0948 -
Educational & DIYs
12V Cabinet Drawer Electric Solenoid Door Lock 54x28x39mm
To drive a solenoid lock with an Arduino you will need a relay module fairly good power supply, as a lot of current will rush into the solenoid to charge up the electro-magnet, about 1000mA, so don’t try to power it with a 9V battery!
SKU: SV-021 -
-
-
-
-
Modules and Breakout Boards, Wireless Communication
JT308 USB 125Khz RFID Card reader module windows
1. MIFARE Classic 1K Chip
2. 13.56MHZ
3. Blue color
4. ABS Material, waterproof.
5. With metal ring.
6.can work with RC522 and PN532
7.block 0 can’t change, UID Can’t change, please contact with us if you are not sure about your chip.
8.ISO14443A
MIFARE and MIFARE Classic are trademarks of NXP B.V.SKU: 1405 -
-
General Sensors, Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & Power
ACS712 5A 5 Amp Current Sensor Module
General Sensors, Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & PowerACS712 5A 5 Amp Current Sensor Module
The ACS712 Module uses the famous ACS712 IC to measure current using the Hall Effect principle. The module gets its name from the IC (ACS712) used in the module, so for you final products use the IC directly instead of the module.
SKU: 0755 -
3D Printers, CNC & 3D Printers
Anycubic Kobra 3 Max Combo 3D Printer, Multi-Color 3D Printer 4 Colors High Speed 3D Printer
3D Printers, CNC & 3D PrintersAnycubic Kobra 3 Max Combo 3D Printer, Multi-Color 3D Printer 4 Colors High Speed 3D Printer
● The Largest Consumer-Grade Multicolor 3D Printer
● 420*420*500mm Print Volume
● Latest ACE PRO Flawless 8-Color Printing
● Precise Auto-Leveling & Anti-Step Lost
● Filament Box with Drying Capability
● 600mm/s High-Speed Printing
● Anycubic Slicer Next & Anycubic App UpgradeSKU: TDP-071 -
3D Printer Parts, CNC & 3D Printers
3D Printer Heated Bed Power Module Power Expansion Board MOS Tube High Current Load Module
3D Printer Parts, CNC & 3D Printers3D Printer Heated Bed Power Module Power Expansion Board MOS Tube High Current Load Module
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V)
- Make sure that the cables that connect to the controller board and hotbed can withstand high current
- We recommend using a 24V power supply when using a heat bed with high power
SKU: CNC-143 -
Modules and Breakout Boards, Wireless Communication
XL4432-SMT SI4432 Wireless Transceiver Module
- XL4432-SMD is based on the company’s Silicon relevant information from well-designed professional manufacturing, the most fitting of various characteristics SI4432.
- Murata high-frequency device module used in all specifications of inductance and capacitance, the crystal of 10ppm precision specifications ensure that the wireless module features to be fully reflected.
- From professional OEM using precision SMT lead- solder cessing, all modules have been professional equipment testing, consistency, and stability of the modules are fully tested.
- SPI interface, small size volume, convenient Stamp Interface embedded design, fully extended from your equipment performance to the next level.
SKU: 1430 -
Converters, Modules and Breakout Boards
DC-DC 24V/12V To 5V 5A Step Down Power Supply Buck Converter Adjustable USB Step-down Charging Module
Converters, Modules and Breakout BoardsDC-DC 24V/12V To 5V 5A Step Down Power Supply Buck Converter Adjustable USB Step-down Charging Module
- Synchronous rectification scheme, wide voltage input, high current output, high efficiency.
- With DC plug and terminals, easy to use.
- With USB port, with fast-charge identification chip compatible with Andrews and iphone mobile phone.
- Input voltage: DC 9V – 36V.
- The output voltage: 5.2V / 5A / 25W.
SKU: 1863 -
Discrete Electronic Components, Light Dependent Resistors, Resistors
Large Size LDR Light Dependent Resistor
Discrete Electronic Components, Light Dependent Resistors, ResistorsLarge Size LDR Light Dependent Resistor
- Package: RADIAL 5mm
- Wave Length/Frequency: 650nm
- Product Type: Photo Conductive Cell
- Light resistance: 10-20K Ohm
- Dark resistance:1-20M ohm
- Max voltage: 150V
- Max power: 100mW
- Maximum Operating Temperature : +800C (Approx.)
SKU: Z-1461 -
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry Pis
Heat Sink Copper Heatsink Radiator Cooling Kit Cooler For Raspberry Pi 4 Model B
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry PisHeat Sink Copper Heatsink Radiator Cooling Kit Cooler For Raspberry Pi 4 Model B
A complete set of heats sinks for Rapsberry pi, which provide coolant facility to Raspberry Pi. It is made of Pure Copper for better performance. The fins increase the area of the board and thus provide for greater heat transfer.
SKU: 1491 -
Gas Sensors, Modules and Breakout Boards, Sensors & Transducers
MQ-4 Methane/ Natural Gas Sensor Module for Arduino
Gas Sensors, Modules and Breakout Boards, Sensors & TransducersMQ-4 Methane/ Natural Gas Sensor Module for Arduino
- Good sensitivity to Combustible gas in wide range
- High sensitivity to CH4, Natural gas.
- Small sensitivity to alcohol, smoke.
- Fast response Stable and long life
- Simple drive circuit
SKU: 0128 -
Essential tools, Instruments & Tools
Anti Static Bracelet, Electrostatic ESD Discharge Cable Band Wrist Strap Cordless Anti Static Bracelet Electrostatic ESD Discharge Cable Band Wrist Strap
Essential tools, Instruments & ToolsAnti Static Bracelet, Electrostatic ESD Discharge Cable Band Wrist Strap Cordless Anti Static Bracelet Electrostatic ESD Discharge Cable Band Wrist Strap
- Simply wrap strap around wrist.
- Prevent Static shock in dry environment.
- Keep static from damaging electronic parts and equipment.
- Adjustable wrist strap.
- Inner conducting layer made of stainless shell.
- High Quality Strain relief.
- Soft elastic band for comfort.
SKU: 1767 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 7S 24V 20A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 7S 24V 20A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS Li-ion 7S 24V 20A BMS Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-022 -
-
CNC & 3D Printers, Resin
JAMG HE High Impact Resistant Flexible Resin 3D Printer Resin for DLP LCD MONO (250G)
CNC & 3D Printers, ResinJAMG HE High Impact Resistant Flexible Resin 3D Printer Resin for DLP LCD MONO (250G)
Shock resistance, anti-folding
Flexibility with little elasticity.
High speed printing and reduced distortion.
High-precision printing with smooth surface.
Non VOC, RoHS REACH, EN71-3 certified
SKU: PF-013 -
3D Printers, CNC & 3D Printers, FDM 3D Printers
Official CREALITY K1 Max Fastest FDM 3D Printer with 600mm/s Max. Speed 300x300x300mm Printing Volume
3D Printers, CNC & 3D Printers, FDM 3D PrintersOfficial CREALITY K1 Max Fastest FDM 3D Printer with 600mm/s Max. Speed 300x300x300mm Printing Volume
Creality K1 Max 3D Printers, 600mm/s Max Speed 20000mm/s² Acceleration 32mm³/s Max Flow Hotend Hands-Free Auto Leveling Dual Cooling and 300mm printing volume is available at electrobes at the best price online in Pakistan
SKU: TDP-012 -
Discrete Electronic Components, ICs, Motor Driver
MC33153 Single IGBT Motor Driver IC
• High Current Output Stage: 1.0 A Source/2.0 A Sink
• Protection Circuits for Both Conventional and Sense IGBTs
• Programmable Fault Blanking Time
• Protection against Overcurrent and Short Circuit
• Undervoltage Lockout Optimized for IGBT’s
• Negative Gate Drive Capability
• Cost Effectively Drives Power MOSFETs and Bipolar TransistorsSKU: 0856 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
5.8GHZ Microwave Radar Sensor Module XYC-WB-DC Smart Sensoring Switch 6-9M
-9%
General Sensors, Modules and Breakout Boards, Sensors & Transducers5.8GHZ Microwave Radar Sensor Module XYC-WB-DC Smart Sensoring Switch 6-9M
It uses Doppler radar technology, With the ability to automatically sensing to control another product, high sensitivity, sensor distance, reliability, wide-angle sensor, wide voltage range and other characteristics. Widely used in lighting conditions, anti-theft alarm is available online at electrobes-com-827299.hostingersite.com in Pakistan.
SKU: 0133 -
Compatibles for Arduino, Mainboards, Modules and Breakout Boards
Arduino UNO R3 SMD Variant Improved Version
-32%
Compatibles for Arduino, Mainboards, Modules and Breakout BoardsArduino UNO R3 SMD Variant Improved Version
The Arduino Uno R3 Compatible Board is a microcontroller board which is based on the ATmega328. Arduino Uno has 14 digital input or output pins(where 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It has everything needed to support the microcontroller, you need to simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
SKU: 0119-1 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS LFP LifePo4 8S 24V 80A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS LFP LifePo4 8S 24V 80A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
DALY BMS 8S 24V LifePO4 PCB Protection Board with Balance Wire and Temperature Sensor for 8 3.2V Cells 24V LiFePO4 Lithium Battery Pack with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-032 -
Essential tools, Instruments & Tools
KADA 903D 3 in 1 multi-function Hot Air Soldering Rework Station + Soldering Iron + Power Supply
Essential tools, Instruments & ToolsKADA 903D 3 in 1 multi-function Hot Air Soldering Rework Station + Soldering Iron + Power Supply
Original KADA 903D 3 in 1 multi-function Hot Air Soldering Rework Station + Soldering Iron + DC Power Supply an all in one soldering tool suitable for de-soldering and soldering of various components, such as: SOIC CHIP QFP PLCC BGA SMD components.
SKU: 1317 -
General Electronics, Instruments & Tools
10mm Elastic woven wire mesh black encrypted arranged woven nylon tube telescopic sleeve – 1 Meter
General Electronics, Instruments & Tools10mm Elastic woven wire mesh black encrypted arranged woven nylon tube telescopic sleeve – 1 Meter
• Fire Retardant: Woven wire mesh is fire retardant, making it safe to use around fire hazards.
• Elastic: The elastic material of the woven wire mesh allows for easy installation and flexibility.• Encrypted: The encrypted design of the woven wire mesh provides additional security and protection for your cables.
• Telescopic: The telescopic feature of the woven wire mesh allows easy adjustment to accommodate different cable sizes.
SKU: CNC-291 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS LFP LifePo4 20S 60V 20A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS LFP LifePo4 20S 60V 20A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
DALY BMS 20S 60V LifePO4 PCB Protection Board with Balance Wire and Temperature Sensor for 20 3.2V Cells 60V LiFePO4 Lithium Battery Pack with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-035 -
Discrete Electronic Components, General Electronic Boards, Light Dependent Resistors, Modules and Breakout Boards, Resistors
Photosensitive Resistor LDR Light Sensor Module with Digital + Analog Output
Discrete Electronic Components, General Electronic Boards, Light Dependent Resistors, Modules and Breakout Boards, ResistorsPhotosensitive Resistor LDR Light Sensor Module with Digital + Analog Output
Features :
- It comes with Mounting Hole Screw.
- Easy to install
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
- Output: DO digital switch output (0 and 1), AO analog voltage output Compatible with Arduino, Raspberry, and other microcontroller board.
SKU: 1127 -
Discrete Electronic Components, General Electronic Boards, Light Dependent Resistors, Modules and Breakout Boards, Resistors
HW-479 RGB LED Module ky-016 3 colour Led Board for Arduino
Discrete Electronic Components, General Electronic Boards, Light Dependent Resistors, Modules and Breakout Boards, ResistorsHW-479 RGB LED Module ky-016 3 colour Led Board for Arduino
The KY-016 RGB Three Color Module in Pakistan, easy-to-use module, compact size that allows you to create a wide variety of colors using a single RGB LED. RGB Three Color Module consists of a 5mm RGB LED, three 150Ω limiting resistors to prevent burnout, and four male header pins.
SKU: 0146 -
Light and Infrared Sensors, Modules and Breakout Boards, Sensors & Transducers
Infrared IR Optical Counter Tachometer RPM Speed Measuring Sensor Optocoupler Module
Light and Infrared Sensors, Modules and Breakout Boards, Sensors & TransducersInfrared IR Optical Counter Tachometer RPM Speed Measuring Sensor Optocoupler Module
Hall effect Infrared IR Optical Counter Tachometer RPM Speed Measuring Sensor Optocoupler Module Compatible with most of microcontroller. Buy online in Pakistan.
SKU: 0598 -
Heat Sinks
Heat Sink Aluminium made Self Adhesive Complete Set for Raspberry Pi
A complete set of heats sinks for Rapsberry pi, which provide coolant facility to Raspberry Pi. It is made of Pure Copper for better performance. The fins increase the area of the board and thus provide for greater heat transfer.
SKU: 0900 -
-
Light and Infrared Sensors, Modules and Breakout Boards, Sensors & Transducers
DC 12V Human Infrared Sensor Switch Light Sensor Infrared PIR Motion Sensor Switch 180 Degree
Light and Infrared Sensors, Modules and Breakout Boards, Sensors & TransducersDC 12V Human Infrared Sensor Switch Light Sensor Infrared PIR Motion Sensor Switch 180 Degree
This is a 12V human infrared sensors, pyroelectric infrared technology, the use of industrial district-level chip, intelligent control, set energy saving, convenient and environmentally friendly one, very convenient. This module also comes in 220V AC variant.SKU: 0766 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 20S 72V 30A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 20S 72V 30A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS 20S 72V Lithium Li Ion Battery Pack BMS With Balance And Waterproof 30A 40A 50A 60A Used For 72V E-bike Scooter PCB PCM Board Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-017 -
Adapters, Batteries & Chargers
24V 20A 480W Switching Mode Power Supply SMPS Adapter
24V power supplies (or 24VDC power supplies) are one of the most common power supplies in use today. In general, a 24V DC output is obtained from a 110VAC or 220VAC input using a combination of transformers, diodes and transistors.
SKU: CNC-183 -
-
3D Scanners, CNC & 3D Printers
Creality CR-Scan Raptor 3D Scanner for 3D Printing
Hybrid Blue Laser & NIR.
-
Hybrid Blue Laser & NIR
-
7 Blue Parallel Laser Lines
-
Metrology Grade Accuracy, up to 0.02mm
-
Sharper Edges and Richer Details
-
Objects between 5-2000mm
-
Anti-shaking for Smooth Scanning
-
Scan Black/Metal Objects Without Sprays
-
24-Bit Full-Color Scanning
-
Light and Compact(215mmx50mmx74mm), only weight 372g
SKU: TDP-057 -
-
CNC & 3D Printers, Resin
JAMG HE Water Washable 3D Printer Resin – 1000g
3D Printer Resin, JamgHe Water Washable Resin for LCD DLP SLA 405nm Printer UV-Curing Photopolymer Rapid High Precision Low Odor Standard Resin. Jamg He distributors of all types of resins and filaments we hold in our stock.
SKU: PF-009 -
CNC & 3D Printers, CNC Machine Parts
PCB Drill Bit Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank
CNC & 3D Printers, CNC Machine PartsPCB Drill Bit Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank
0.35, 0.6, 0.8, 0.9, 1.0, 1.1, 1.2, 1.3, 1.4, 1.5, 2.0, 2.3, 2.4, 2.5, 2.6, 3.0, 3.1mm Tungsten Carbide CNC Engraving Print Circuit Board PCB Drill Bits Drilling Tool at best price in Pakistan
SKU: CNC-010 -
Antennas, Discrete Electronic Components
433MHz SMA Antenna Male Type with SMA Male Connector
A small, high-quality, quad-band, common-used, standard SMA (internal male pin), 433MHz antenna with 2dBi gain SMA Ra Plastic Duct RF Transmitter and Receiver Antenna Male Type Right Angle SMA Connector.
SKU: 1727 -
Adapters, Batteries & Chargers
IMAX B6 80W LIPO Battery Balance Charger RC Lipo Battery Charger Dis-Charge 1S-6S Multi Function Charging
Adapters, Batteries & ChargersIMAX B6 80W LIPO Battery Balance Charger RC Lipo Battery Charger Dis-Charge 1S-6S Multi Function Charging
The intuitive menu system means charging and cycling is an easy process and can be done quickly and accurately either in the field, by using a 12V input such as a car battery, or at home with a 12V power supply.
Bundled with the charger are a number of input and output wires which should satisfy most any charging requirement. This charger has a JST-XH charge plug, which makes it compatible with Zippy, HXT, iMax and any pack with a JST-XH adapter.
SKU: 1443 -
-
-
3D Printers, CNC & 3D Printers, FDM 3D Printers
Official Creality Ender 3 V3 Plus 3D Printer with 600mm/s Printing Speed, 300*300*330mm build volume
3D Printers, CNC & 3D Printers, FDM 3D PrintersOfficial Creality Ender 3 V3 Plus 3D Printer with 600mm/s Printing Speed, 300*300*330mm build volume
Official Creality Ender 3 V3 Plus 3D Printer with 600mm/s Printing Speed, Upgraded with Core XZ Motion System Clog-Free Extrusion 60W 300℃ Hotend Heater Auto Leveling Printing 300*300*330mm build volume in Pakistan
SKU: TDP-040 -
Accessories, Batteries & Chargers
5V-7VDC Lithium Battery Capacity Level Indicator Module
Battery Display:
- When battery voltage is over N*3.3V,it will illuminate 1 block electricity quantity
(note: N represents battery quantity) - When battery voltage is over N*3.5V,it will illuminate 2 blocks electricity quantity
- When battery voltage is over N*3.7V,it will illuminate 3 blocks electricity quantity
- When battery voltage is over N*3.9V,it will illuminate 4 blocks electricity quantity.
- When battery voltage is less than N*3.3V,4 blocks display will be off; it represents battery
is less than 3.3V,and you can charge the battery.
SKU: 1573 - When battery voltage is over N*3.3V,it will illuminate 1 block electricity quantity
-
Discrete Electronic Components, ICs, Logic Gates
74LS30 8-input NAND Gate IC
- Operating voltage range: +4.75 to +5.25V
- Recommended operating voltage: +5V
- Maximum supply voltage:7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Typical Rise Time: 18ns
- Typical Fall Time: 18ns
- Operating temperature:0°C to 70°C
- Storage Temperature: -65°C to 150°C
SKU: 0409 -
Discrete Electronic Components, General ICs, ICs, Logic Gates
CD4073 CMOS Triple 3-Input AND Gate Breadboard-Friendly IC DIP-14
Discrete Electronic Components, General ICs, ICs, Logic GatesCD4073 CMOS Triple 3-Input AND Gate Breadboard-Friendly IC DIP-14
The CD4073BE is a 3-input CMOS Triple AND Gate provides the system designer with direct implementation of the AND function and supplement the existing family of CMOS gates.SKU: 1178 -
Modules and Breakout Boards, Sensors & Transducers, Temperature Sensor
DS18B20 Temperature Sensor Waterproof Digital Thermal Probe Temp Sensor – 1M Lead Length
-3%
Modules and Breakout Boards, Sensors & Transducers, Temperature SensorDS18B20 Temperature Sensor Waterproof Digital Thermal Probe Temp Sensor – 1M Lead Length
- Sensors For Arduino DS18b20 Temperature Sensor Module
- Product Type : Temperature sensor Module
- Voltage range : 3.5 – 5V DC
- Length : 100 cm.
SKU: 1164 -
Discrete Electronic Components, Filter & Amplifiers, ICs
LM386 Audio Amplifier IC
- Operating voltage range: +4.75 to +5.25V
- Recommended operating voltage: +5V
- Maximum supply voltage:7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Typical Rise Time: 18ns
- Typical Fall Time: 18ns
- Operating temperature:0°C to 70°C
- Storage Temperature: -65°C to 150°C
SKU: 0421 -
3D Printer Parts, CNC & 3D Printers
0.5mm Mk3 Brass Nozzle for 3D Printer
Buy online 0.5mm 3D Printer Brass Nozzle Accessories Mk3 in Pakistan. Electrobes has quality products for 3D printers & CNC machines. Also available in 0.2mm, 0.25mm, 0.3mm, 0.35mm, 0.4mm, 0.6mm, 0.8mm and 1.0mm.
SKU: CNC-050-1 -
Planes And Copters, Robotics & Machines
Ardupilot APM2.8 Quadcopter Flight Controller with Built-in Compass
Planes And Copters, Robotics & MachinesArdupilot APM2.8 Quadcopter Flight Controller with Built-in Compass
- Designed for Youth: Recommended for ages 14 and up, this flight controller is ideal for drone enthusiasts.
- Improved accuracy: Integrated DF13-4P I2C interface for more reliable external GPS and compass connection.
- Wide Compatibility: Designed for helicopters, this APM2.8 flight controller ensures optimal performance.
- Increased Stability: Updated with LP2985-3.3, providing 16V voltage and higher reliability.
- Compatibility Expansion: Includes a MUX port, providing additional connectivity options for drones.
SKU: 0992 -
Audio & Visual, LCD & Display
7 Inch HMI LCD Display Touch Panel with Shell DMG80480C070_15WTR (Commercial grade)
Audio & Visual, LCD & Display7 Inch HMI LCD Display Touch Panel with Shell DMG80480C070_15WTR (Commercial grade)
The 7 inch HMI LCD Resistive Touch Display with Shell is a Seamless Human Machine Interface (HMI) display module solution that provides a control and visualization interface for any Raspberry Pi and Arduino kits.
SKU: 1848 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 3S 12V 50A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 3S 12V 50A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS Li-ion 3S 12V 50A BMS Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-002 -
Automation Gadgets
Smart Fan Dimmer Wall Mount WiFi Switch APP Controlled Touch Switch EU 100-240V
- Operation Mode: ON-OFF
- Material: Glass + ABS plastic
- Current Rating: 15 Amps
- Operating Voltage: 100-240 Volts
- Connector Type: Wireless
- Interface Type: Touch
- Controller Type: IFTTT, Google Assistant, Amazon Alexa
- Connectivity Protocol: Wi-Fi
- Color: White, Black, Gold
SKU: HA-026 -
-
Instruments & Tools, Meters
UNI-T UT373 Non-Contact Tachometer RPM Speed Sensing Meter
UT373 is a reliable digital non-contact tachometer used to measure rotation speed of motors and other machines. This device is able to display results in RPM or revolution count. UT373 is able to safely measure rotational objects through a non-intrusive method.
SKU: DM-019 -
DIP Transistors, Discrete Electronic Components, Transistors
BC516 PNP Darlington Transistor
- Type – PNP
- Collector-Emitter Voltage: -30 V
- Collector-Base Voltage: -40 V
- Emitter-Base Voltage: -10 V
- Collector Current: -1 A
- Collector Dissipation – 0.625 W
- DC Current Gain (hfe) – 30000
- Transition Frequency – 200 MHz
- Operating and Storage Junction Temperature Range -55 to +150 °C
- Package – TO-92
SKU: 0457 -
3D Printers, CNC & 3D Printers, FDM 3D Printers
Elegoo Neptune 3 Pro FDM 3D Printer Dual-Gear Direct Extruder 225x225x280 Bed Size
3D Printers, CNC & 3D Printers, FDM 3D PrintersElegoo Neptune 3 Pro FDM 3D Printer Dual-Gear Direct Extruder 225x225x280 Bed Size
Elegoo Neptune 3 Pro FDM 3D Printer with 32-bit Silent Motherboard, Auto bed leveling, Dual-Gear Direct Extruder, 225x225x280 Larger Bed Volume 3D Printing Machine at best price online in Pakistan
SKU: TDP-006 -
IOT Development Board, Modules and Breakout Boards
RC832 Receiver and TS832 Transmitter 32Ch 5.8G 600mW Wireless AV for FPV
IOT Development Board, Modules and Breakout BoardsRC832 Receiver and TS832 Transmitter 32Ch 5.8G 600mW Wireless AV for FPV
Buy online RC832 Receiver+TS832Transmitter 32Ch 5.8G 600MW Wireless AV for FPV in Pakistan. 600mW transmitter power assure 5KM distance in open area, 5-8 KM is available if work with the bigger gain antenna.
SKU: 1158 -
Discrete Electronic Components, ICs, Logic Gates
74LS02 Quad 2-input NOR Gate IC
- Operating voltage range: +4.75 to +5.25V
- Maximum supply voltage: 7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Maximum ESD: 3.5KV
- Typical Rise Time: 15ns
- Typical Fall Time: 15ns
- Operating temperature :0°C to 70°C
- Storage Temperature: -65°C to 150°C
- Operating temperature: 0°C to 75°C
SKU: 0401 -
3D Printer Filaments, CNC & 3D Printers
Nylon (PA) Hydrophobic 1.75mm 3D Printer Filament Roll
1.75mm Nylon PA Filament s a strong durable material that is not as brittle as ABS or PLA. Nylons are classified in the family of polyamides, which is a polymer consisting of amides joined together by peptide bonds. For Fused Deposition Modeling, FDM, Nylon filament is a great material to use for 3D printing. The strength of the Nylon filament is remarkable, especially when using a higher fill setting.
1kg (2.2lb)/0.5kg (1.1 lb) spool of filament is used with most 3D printers that accept 1.75mm Nylon filament and have a heated bed plate.
SKU: PF-0190 -
3D Printer Parts, CNC & 3D Printers, CNC Machine Parts
0.3mm to 3.0mm Tungsten Drill Bit Set
- Micro PCB drill bits, used to create tiny holes needed for a PCB
- Made from tungsten steel with high hardness and wear resistance, not bend or break easily
- Micro drill bits can prevent resistance, smooth to drill holes
- Sharp cutting edge can reduce cutting force and improve drilling quality
- Strictly symmetrical cutting edge, ensuring high efficient drilling and avoids deviation
- Applied to PCB, SMT, mold, hardware processing, electronic industry, etc.
SKU: CNC-159 -
-
-
Discrete Electronic Components, ICs, Optocoupler
4N35 (Original) 6-Pins Optocoupler Darligton Photo Isolator IC
Discrete Electronic Components, ICs, Optocoupler4N35 (Original) 6-Pins Optocoupler Darligton Photo Isolator IC
• Isolation test voltage 5000 VRMS
• Interfaces with common logic families
• Input-output coupling capacitance < 0.5 pF
• Industry standard dual-in-line 6 pin package• AC mains detection
• Reed relay driving
• Switch mode power supply feedback
• Telephone ring detection
• Logic ground isolation
• Logic coupling with high frequency noise rejectionSKU: 0247 -
Buttons, Switches & Pads, Connectivity, Power Switches
KCD4 Rocker Switch DPDT 2-State
- 20A 125VAC / 16A 250VAC (UL,CUL)
- 6A 125VL, 3/4HP 250VAC(UL, CUL)
- 16(4) A 250VAC~T125 (VDE,ENEC, CQC)
- Initial contact resistance : 20m ohm max.
- Insulation resistance : 100M ohm min, at 500VDC
- Dielectric strength : 1,000VAC (UL), 3000 VAC(VDE) for 1 minute
- Electrical Life: 6000 (UL); 10000 (VDE) cycles
SKU: 0500 -
Batteries & Chargers, Rechargeable
Universal Single Slot Li-ion Battery Charger for 18650 Cells 3.7v Rechargeable Lithium Ion Batteries
Batteries & Chargers, RechargeableUniversal Single Slot Li-ion Battery Charger for 18650 Cells 3.7v Rechargeable Lithium Ion Batteries
- Home/Travel Wall AC Multifunctional/Universal Battery Charger
- Automatically stops when charging is complete.
- Red / Orange light when charging, full of turns green, auto stop charging.
- Designed to charge your batteries quickly and safely.
- Wide range charging Voltage
SKU: 0938 -
Audio & Video Connector, Connectors, Discrete Electronic Components
3.5mm Audio Jack Female Connector Plug Socket
Audio & Video Connector, Connectors, Discrete Electronic Components3.5mm Audio Jack Female Connector Plug Socket
- Connector plug
- Connector type Jack 3.5mm
- Connector type male
- Spatial orientation straight
- Mechanical mounting for cable
- Electrical mounting soldering
- Contact plating nickel plated
SKU: 0690 -
-
Discrete Electronic Components, LED Strips, LEDs & Lights
10 Meters 220V AC Warm White Color Digital LED Strip Rope Lights
Discrete Electronic Components, LED Strips, LEDs & Lights10 Meters 220V AC Warm White Color Digital LED Strip Rope Lights
- Environmental friendly: Low carbon, no radiation, no flicker, and no pollution to human and environment.
- Safe and stable.
- Cuttable along the cutting marks, according to practical requirement.
- Low power consumption, with 50,000+ hours long life span.
- 120-degree wide angle illumination, smooth and even light spread.
SKU: 1304 -
Discrete Electronic Components, General ICs, ICs
74LS37 7437 Quad 2-Input SN7437 NAND IC
- Logic IC Type: NAND GATE
- Load Capacitance (CL): 45.0 pF
- Operating Temperature-Min: 0.0 Cel
- Operating Temperature-Max: 70.0 Cel
- Power Supplies (V): 5
- Power Supply Current-Max (ICC): 54.0 mA
- Propagation Delay (tpd): 15.0 ns
- Schmitt Trigger: NO
- Supply Voltage-Nom (Vsup): 5
- Supply Voltage-Min (Vsup): 4.75 V
- Supply Voltage-Max (Vsup): 5.25 V
SKU: 0541 -
CCTV and IP Cameras
Bulb WIFI Dual 2 Lens 2MP Double Camera WIFI Smart V380 Pro Camera
1. Remote viewing through the free App on your smart Phone
2. The alert will be pushed to your phone if any motion is detected
3. Amazing night vision, You could switch between B/W & color mode even in the night!
4. 360°Pan/Tilt Camera, with the 1080P high resolution, we can enjoy the panoramic viewing no blind angle
5. Two Way Audio, talk back with people near the cameras whether you’re in the backyard or halfway around the world
SKU: CAM-019 -
-
Connectors, Discrete Electronic Components, Row Headers
2.54mm 40 x 2 Male Row double Headers
- 80 pins
- 80 positions
- 3 AMP
- Breakaway
- 2.54 mm spacing
- 0.1 inch spacing
- Total pin length 11.5 mm
- Total pin length 0.453 inch
- Connector Mating pin length 6 mm
- Connector Mating pin length 0.236 inch
- PCB mating 3.mm
- PCB mating 0.118 inch
- Gold flash pins
- Double Row
- Ideal for Arduino
- Through Hole
SKU: 0583 -
Batteries & Chargers, Rechargeable
3.7V 2000mAh Rechargeable 18650 Li-Ion Battery Cell – New
We are providing this 2000mAh Li-Ion Rechargeable Li-ion 18650 Cell at the best price in the market for our customers. These are powerful cells with higher number of life cycles and charging capacity compared to other cells available online in Pakistan.
SKU: 1787 -
Diodes, Discrete Electronic Components
MB6S Single Phase Rectifier Bridge SMD
- Peak Reverse Voltage:600 V
- Load Currentt: 0.5 A
- Maximum Operating Temperature:+ 150 C
- Length:8.8 mm
- Width:6.5 mm
- Height:3.4 mm
- Mounting Style:SMD/SMT
- Package / Case:DBS
- Packaging:Reel
- Ir – Reverse Current:5 uA
- Minimum Operating Temperature:- 55 C
- Factory Pack Quantity:2500
- Vr – Reverse Voltage: 700 V
SKU: 0860 -
Audio & Visual, LCD & Display
2.4 Inch ILI9341 Touchscreen TFT LCD Display Screen Shield Module For Arduino UNO R3 Board
-20%
Audio & Visual, LCD & Display2.4 Inch ILI9341 Touchscreen TFT LCD Display Screen Shield Module For Arduino UNO R3 Board
- Color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor).
- Composed of a color TFT-LCD panel, driver IC, FPC and a back light unit. The module display area contains 320 x 240 pixels.
- The screen uses analog pins A0-A4 for LCD control and touch screen operations, which are in the same position on the UNO and the Mega, so the touch screen should work without any modification.
- The shield comes equipped with a micro SD card reader for easy access to use a software-based SPI library.
- Compatible with Arduino UNO R3 Mega2560 DUE.
SKU: 0177 -
Discrete Electronic Components, ICs, Op Amps
LM324 Quad OP-AMP IC
- Integrated with four Op-Amps in a single package
- Wide power supply Range
- Singe supply – 3V to 32V
- Dual supply – ±1.5V to ±16V
- Low Supply current – 700uA
- Single supply for four op-amp operation enables reliable operation
- Operating ambient temperature – 0˚C to 70˚C
- Soldering pin temperature – 260 ˚C (for 10 seconds – prescribed
SKU: 0435 -
Diodes, Discrete Electronic Components
1N4742A 12V 1W Zener Diode DO-41
A Zener diode is a special kind of diode which allows current to flow in the forward direction like a regular diode, but also allows it to flow in the reverse direction when the voltage is above a certain value. This is known as the ‘breakdown voltage‘. That means you apply voltage across them, and when a preset voltage is reached, they start conducting.
SKU: 1341 -
Adapters, Batteries & Chargers
36V 3A 108W Switching Mode Power Supply SMPS Adapter
36V power supplies (or 36VDC power supplies) are one of the most common power supplies in use today. In general, a 36V DC output is obtained from a 110VAC or 220VAC input using a combination of transformers, diodes and transistors.
SKU: CNC-221
