[vc_row][vc_column]
-
-
Discrete Electronic Components, General Electronics
Slotted Opto-Switch / Opto Interrupter RPM Speed Sensor
Discrete Electronic Components, General ElectronicsSlotted Opto-Switch / Opto Interrupter RPM Speed Sensor
- Number of Channels: 1
- Typical Rise Time: 10 μ
- Slot Width: 3.1mm
- Operating Temperature Range: -55 → + 85 ° C
- Dimensions: 11.9 x 6.3 x 11.1mm
- Length: 11.9mm
- Height: 11.1mm
- Minimum Operating Temperature: -55 ° C
- Maximum Operating Temperature: 85 ° C
- Width: 6.3mm
- Number of Pins: 4
- Mounting Type: Through Hole
- Typical Fall Time: 8μs
- Output Device: phototransistor
SKU: 0221 -
-
Consumer Electronics, EV Parts
48V-72V Universal Electric Bicycle Scooter Speedometer Odometer LED Dash Display
Consumer Electronics, EV Parts48V-72V Universal Electric Bicycle Scooter Speedometer Odometer LED Dash Display
Analog Odometer Power Meter Speedo Meter Instrument for Electric Tricycle, Motorcycle, Scooter, E-kart, Electric rikshaw and electric bicycle etc. We have all items required for electric scooter in stock. You can also get other related components like BLDC motor, speed controller and switches at electrobes-com-827299.hostingersite.com at cheaper price in Pakistan.
SKU: EB-03 -
Buttons, Switches & Pads, Connectivity, Touch Switch
1 Channel Capacitive Touch Module – TTP223
A capacitive touch sensor module based on the dedicated TTP223 touch sensor IC. The module provides a single integrated touch sensing area of 11 x 10.5mm with a sensor range of ~5mm. An on-board LED will give a visual indication of when the sensor is triggered.
SKU: 0643 -
Audio & Visual, Computer Interface
USB to FCC 10 Pin 1.0mm Adapter Board HDL662B LCM LCD Module Debugging Interface
Audio & Visual, Computer InterfaceUSB to FCC 10 Pin 1.0mm Adapter Board HDL662B LCM LCD Module Debugging Interface
The USB to FCC 10-pin 1.0mm Adapter Board provides seamless connectivity between USB and FCC 10-pin 1.0mm interfaces. It simplifies integration and offers flexibility for various projects requiring easy USB-to-FCC connection.
SKU: 1849 -
Planes And Copters, Robotics & Machines
930KV A2212 Brushless DC Motor BLDC Rotor for Quadcopter Drone
Planes And Copters, Robotics & Machines930KV A2212 Brushless DC Motor BLDC Rotor for Quadcopter Drone
This A2212 930KV is the type of one of the most popular brushless out runner motors among RC hobbyists. 930KV BLDC MOTOR is a motor for the airplane aircraft quadcopter. High-quality materials include long life Japanese bearings, the precision-balanced rotor which makes this brushless motor very smooth and reliable, even at the maximum RPM. The metal gears help with the movement, they will rotate in the proper direction. The brushless motors more powerful for their weight than brushed motors, and they last way longer.
SKU: 1174 -
Servos & Controllers
Small Disc 25T Standard Steering Gear Universal Metal Steering for MG995 MG996
- Metal Arm Horn Spline is made of light weight, strong Aluminum alloy.
- This servo horn is fine machined with high precision.
- It is useful for many applications that use servo.
- It works with all standard servo mounts
- Dimensions: 20 × 20 × 4.5 mm
SKU: 1880 -
Analog, Discrete Electronic Components, ICs
74LS160 74160 74HC160 4-Bit Synchronous Decade Counter
The 74LS160 IC package, consisting of 16 pins, contains a single 4 bit synchronous counter circuit which can be wired for decade counting mod, without external logic chips. By wiring more than one 74LS160 together (cascading), it is possible to make higher count lengths (powers of ten). For example, two 74LS160s cascaded together would yield a counter capable of decimally counting the range 00 – 99.
SKU: 1584 -
Discrete Electronic Components, ICs, Power Optimizer & Circuit Protection
LM723 Voltage Regulator IC
- Input supply voltage is up to 40v maximum
- Voltage output ranges from 3v to 37v
- Reference voltage is nearly 7v always
- Current from pin Vz is 25mA
- Current from pin Vref is 15mA
- Operating temperature range: -55°C to +150°C
- Line regulation of 0.01%Vout
- Load regulation of 0.03%Vout
- Ripple rejection of 74 dB
SKU: 0548 -
3D Printers, CNC & 3D Printers, FDM 3D Printers
Creality Ender-5 Max FDM 3D Printer, 400x400x400mm Large Build Volume
3D Printers, CNC & 3D Printers, FDM 3D PrintersCreality Ender-5 Max FDM 3D Printer, 400x400x400mm Large Build Volume
- Pro-level Print Quality: Rigid all-metal frame and 64-point auto bed leveling
- Ultra Fast Printing: 700 mm/s industry-leading speed for a CoreXY printer
- Enormous Build Volume: 400 mm cubed size to print bigger or more
- Tailored for Print Farm: Multi-printer management via WLAN; tri-color indicator light
- Optional Enclosure: Higher ambient temperature for engineering filaments
SKU: TDP-076 -
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
2S 3A 7.4V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards2S 3A 7.4V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
2S 3A Li-ion Lithium Battery 7.4V 8.4V 18650 Charger Protection Board Module is a small PCB mounted Li-ion Lithium Battery charger protection module.
SKU: 0731 -
Instruments & Tools, Meters
UNI-T UDP6720 DC Power Supply, 60V 5A 100W Voltage Current Regulator, Stabilizer Switching Power Supply, AC 220V 110V Input
Instruments & Tools, MetersUNI-T UDP6720 DC Power Supply, 60V 5A 100W Voltage Current Regulator, Stabilizer Switching Power Supply, AC 220V 110V Input
- TYPE: Programmable Switching DC power supply
- Channels: 1
- TOTAL POWER :100W
- OUTPUT VOLTAGE: 0~60V
- OUTPUT CURRENT: 0~5A
- RESOLUTION: 10mV,1mA
- SETTING ACCURACY: <0.05%+10mV <0.2%+2mA
- Connectivity: RS-232
SKU: DM-029 -
Planes And Copters, Robotics & Machines
Flysky FS-GT2 Transmitter with FS-GR3E Receiver RC Remote Control 2.4G 2CH Radio Model Transmitter & Receiver Black For Quadcopter
Planes And Copters, Robotics & MachinesFlysky FS-GT2 Transmitter with FS-GR3E Receiver RC Remote Control 2.4G 2CH Radio Model Transmitter & Receiver Black For Quadcopter
FS GT-2 2.4Ghz 2Ch Tx & Rx GT-2 2.4ghz system is an entry level transmitter offering the reliability of 2.4Ghz signal technology with very sensitive 3ch long antenna receiver for RC Car or Boat.
SKU: RC-001 -
Accelerometer, Gyroscope & Navigation, Modules and Breakout Boards, Sensors & Transducers
MPU9250 GY-6500 6-AXIS 6DOF Accelerometer, Gyroscope, Digital Motion Processor Sensor Module
-21%
Accelerometer, Gyroscope & Navigation, Modules and Breakout Boards, Sensors & TransducersMPU9250 GY-6500 6-AXIS 6DOF Accelerometer, Gyroscope, Digital Motion Processor Sensor Module
MPU9250/6500 GY-9250 GY-6500 9-AXIS 9DOF Accelerometer, Gyroscope Compass Module provides 9-axis Motion Tracking. Buy online in Pakistan
SKU: 0159 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS LFP LifePo4 8S 24V 20A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS LFP LifePo4 8S 24V 20A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
DALY BMS 8S 24V LifePO4 PCB Protection Board with Balance Wire and Temperature Sensor for 8 3.2V Cells 24V LiFePO4 Lithium Battery Pack with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-034 -
Discrete Electronic Components, ICs, Logic Gates
74LS83 FULL ADDER 4-Bit Binary with fast Carry IC
- Operating voltage range: +4.75 to +5.25V
- Recommended operating voltage: +5V
- Maximum supply voltage:7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Typical Rise Time: 18ns
- Typical Fall Time: 18ns
- Operating temperature:0°C to 70°C
- Storage Temperature: -65°C to 150°C
SKU: 0416 -
Compatibles for Arduino, Mainboards, Modules and Breakout Boards
Arduino UNO R3 Development Board ATmega328P DIP Microcontroller
Compatibles for Arduino, Mainboards, Modules and Breakout BoardsArduino UNO R3 Development Board ATmega328P DIP Microcontroller
Arduino Uno is a microcontroller board based on 8-bit ATmega328P microcontroller. It consists a 16MHz crystal oscillator, serial communication, voltage regulator, etc. to support the microcontroller.
SKU: 0100-1 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
20Kg Scale Bar Load Cell Weight Sensor
General Sensors, Modules and Breakout Boards, Sensors & Transducers20Kg Scale Bar Load Cell Weight Sensor
This straight bar load cell (sometimes called a strain gauge) can translate up to 20kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.
SKU: 0949 -
Educational & DIYs
Push-pull DC 6-12V Electric door lock electromagnet
- Iron Body Material
- High quality ultra-compact electric lock.
- Rustproof, durable, safe, convenient to use.
- Suction which tightly sucks the iron, thus locking the door.
- Applicable for being installed in the escape door or fire door electronic controlled system.
- Adopts the principle of electric magnetism, when the current through the silicon, the electromagnetic lock will achieve a strong.
SKU: SV-019 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & Power
ACS712 5A 5 Amp Current Sensor Module
General Sensors, Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & PowerACS712 5A 5 Amp Current Sensor Module
The ACS712 Module uses the famous ACS712 IC to measure current using the Hall Effect principle. The module gets its name from the IC (ACS712) used in the module, so for you final products use the IC directly instead of the module.
SKU: 0755 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 6S 24V 60A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 6S 24V 60A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS Li-ion 6S 24V 60A BMS Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-004 -
Mechanical, Motors and Driver, Robotics & Machines, Stepper Motors & Drivers
28BYJ-48 5V DC Mini Stepper Motor with ULN2003 Stepper Motor Driver Module
Mechanical, Motors and Driver, Robotics & Machines, Stepper Motors & Drivers28BYJ-48 5V DC Mini Stepper Motor with ULN2003 Stepper Motor Driver Module
This 5V DC 28BYJ-48 Stepper Motor is small, inexpensive and high-quality geared step motor. The 28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver is a widely popular combination of the stepper motor and stepper driver, because of the stability and reliability of the system.
Thia 28BYJ-28 stepper motor is imported from one of our trusted suppliers and the supplier has guaranteed for the quality of these compact stepper motors.
SKU: 0896 -
Discrete Electronic Components, General ICs, ICs
LM393 Dual COMPARATOR Low Offset Voltage IC
- Operating voltage range: +4.75 to +5.25V
- Recommended operating voltage: +5V
- Maximum supply voltage:7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Typical Rise Time: 18ns
- Typical Fall Time: 18ns
- Operating temperature:0°C to 70°C
- Storage Temperature: -65°C to 150°C
SKU: 0419 -
CNC & 3D Printers, CNC Machines
Twotrees TTS-20 Max 20W Diode LASER Engraving Laser Marking Machine
Independent App Control: Engraving can be performed without a computer, supported by app control, Wi-Fi connection, or USB connection, enhancing efficiency.
Easily Replaceable Components: The modular design allows independent replacement or exchange of parts.
High Power and Positioning Accuracy: Ensures complex and efficient high-speed engraving tasks.
SKU: CNC-328 -
Consumer Electronics, LED Strips, LEDs & Lights
Neon Flexible LED Light Strip IP65 (100 LED/1m 5m roll) 12V DC
Consumer Electronics, LED Strips, LEDs & LightsNeon Flexible LED Light Strip IP65 (100 LED/1m 5m roll) 12V DC
LED Neon Flex is an energy efficient and reliable alternative for applications looking for an exposed neon effect. At 12x20mm our Neon LED is a flexible system that is very simple to install. It is robust and bendable up to 150°.
SKU: 1553 -
3D Printer Parts, CNC & 3D Printers
235mm*235mm Double Sided PEI Spring Steel Sheet With Magnetic Base
3D Printer Parts, CNC & 3D Printers235mm*235mm Double Sided PEI Spring Steel Sheet With Magnetic Base
235mm Double Sided PEI Sticker Heatbed Hot Bed Removal Spring Steel Sheet Pre-applied PEI Flex Magnetic Base for 3D Printer ender 3 upgraded heat bed sheet. We have other 3d printer related products in our stock to shop at best price in Pakistan.
SKU: CNC-153 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 16S 60V 40A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 16S 60V 40A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS 16S 60V Lithium Li Ion Battery Pack BMS With Balance And Waterproof 20A 30A 40A 50A 60A Used For 60V Ebike Scooter PCB PCM Board Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-015 -
-
DIP Transistors, Discrete Electronic Components, Transistors
BT139 600E Triac Switching Transistor
- Direct triggering from low power drivers and logic ICs
- High blocking voltage capability
- Planar passivated for voltage ruggedness and reliability
- Sensitive gate
- Triggering in all four quadrants
SKU: 0237 -
-
3D Printer Parts, CNC & 3D Printers
BIGTREETECH Octopus V1.1 Control Board 32bit Compatible TFT Series Screen, Support DIY Klipper Firmware and Raspberry Pi Online Printing for Voron V2.4 Upgrade 3D Printer
3D Printer Parts, CNC & 3D PrintersBIGTREETECH Octopus V1.1 Control Board 32bit Compatible TFT Series Screen, Support DIY Klipper Firmware and Raspberry Pi Online Printing for Voron V2.4 Upgrade 3D Printer
BIGTREETECH Octopus Pro is a very powerful motherboard with 8 stepper driver support, so this motherboard can control up to 8 different axes. This feature is especially suitable for multi-colour printing and tool changer, for the use of different tools/modules such as different 3D print heads, laser engraving, laser cutting etc.
The mainboard is compatible with Klipper, RepRap and Marlin and supports Raspberry Pi and Octoprint. FDM 3d printers are available at electrobes. You can buy this kit at the best price online in Pakistan.
SKU: CNC-270 -
3D Printers, CNC & 3D Printers, DLP/SLA/Resin 3D Printer
ANYCUBIC Photon Mono M5s Pro 14K Resin 3D Printer
3D Printers, CNC & 3D Printers, DLP/SLA/Resin 3D PrinterANYCUBIC Photon Mono M5s Pro 14K Resin 3D Printer
ANYCUBIC Photon Mono M5s Pro Resin 3D Printer 14K HD Mono Chrome LCD 3x High Speed Printing Auto leveling Intelligent Detection Large Printing Volume resin SLA 3d printer available in Pakistan
SKU: TDP-036 -
Audio & Sound, Audio & Visual
Piezo Buzzer 95db High-decibel 3-24V Electronic Buzzer Beep Alarm Intermittent Continuous Beep
Audio & Sound, Audio & VisualPiezo Buzzer 95db High-decibel 3-24V Electronic Buzzer Beep Alarm Intermittent Continuous Beep
- Color: Black
- Alarm Diameter:22mm/0.86″
- Alarm Height:10mm/0.39”
- 2 Mounting Holes distance:30mm/1.18″
- 2 Wires length:90mm/3.54″
- Buzzer Type: Piezoelectric
- Sound Pressure Level 95 dB
- Rate Voltage: 12V DC
- Operating Voltage: 3 – 24V
- Max Current Rating 10mA
- Frequency 3900±500Hz
- Drive Method: Drive Circuit Built in Mounting Holes
SKU: 0685 -
Discrete Electronic Components, ICs, Logic Gates
CD4066 Quad Bilateral Switch – Multiplexer
The CD4066BE is a Quad Bilateral Switch IC, that is, it has four switches which can be controlled individual using a control pin. These switches can conduct in both the directions making it bilateral, it is commonly used for multiplexing analog or digital signals.
SKU: 0887 -
-
Discrete Electronic Components, General ICs, ICs
74HC192E 74LS192 4 Bit BCD Presettable Decade UP/DOWN Counter IC
Discrete Electronic Components, General ICs, ICs74HC192E 74LS192 4 Bit BCD Presettable Decade UP/DOWN Counter IC
Counter Type BCD/Decade Counter Counter Category Synchronous Counter Direction Bidirectional Supply Voltage 4.5 Package Type SOIC, PLASTIC, MS-012, SOIC-16 Logic Family CMOS, HC/UH Number of Pins 16 Number of Stages (Bits) 4 bits Clock Frequency 23 MHz Operating Temperature -55 to 125 C (-67 to 257 F) SKU: 0563 -
Discrete Electronic Components, General ICs, ICs
LM7806 1A Standard Positive Voltage Regulator IC
• Output Current up to 1A
• Maximum Input voltage up to 36V
• Output Voltage Accuracy of ±4% at 25°C
• Thermal Overload Protection
• Short Circuit Current Limiting
• Output Transistor safe operation area (SOA) Protection
• RoHS Compliance and Halogen FreeSKU: 0430 -
-
Converters, Modules and Breakout Boards
XL6009 DC-DC Step Up Boost Converter 5 – 32V to 5 – 35V 10W (4A)
Converters, Modules and Breakout BoardsXL6009 DC-DC Step Up Boost Converter 5 – 32V to 5 – 35V 10W (4A)
XL6009 module is a non-isolated step-up boost voltage converter featuring adjustable output voltage, high efficiency. It converts input voltage of 5-32V DC to an output voltage of 4-38V DC.
SKU: 1078 -
Discrete Electronic Components, Light Dependent Resistors, Resistors
LDR Light Dependent Resistor 5mm
Discrete Electronic Components, Light Dependent Resistors, ResistorsLDR Light Dependent Resistor 5mm
- Package: RADIAL 5mm
- Wave Length/Frequency: 650nm
- Product Type: Photo Conductive Cell
- Light resistance: 10-20K Ohm
- Dark resistance:1-20M ohm
- Max voltage: 150V
- Max power: 100mW
- Maximum Operating Temperature : +800C (Approx.)
SKU: 0217 -
3D Printer Parts, CNC & 3D Printers
U604ZZ Toothless Idler Pulley U-Groove Guide Wheel for CNC & 3D Printer
-10%
3D Printer Parts, CNC & 3D PrintersU604ZZ Toothless Idler Pulley U-Groove Guide Wheel for CNC & 3D Printer
- U-groove Guide Wheel For 3D Printer Extruder.
- Full bearing steel grinding for 3D printer extruder guide wheel.
- High precision, Carrying smooth, Low noise.
- Material: Chrome Steel.
- 100% Brand new.
SKU: CNC-111 -
Breadboards, Protoboards & PCBs, Discrete Electronic Components, Modules and Breakout Boards, Voltage, Current & Power
MB102 Breadboard Power Supply Module 3.3V/5V For Arduino Solderless Bread Board
Breadboards, Protoboards & PCBs, Discrete Electronic Components, Modules and Breakout Boards, Voltage, Current & PowerMB102 Breadboard Power Supply Module 3.3V/5V For Arduino Solderless Bread Board
The Breadboard power supply has 3.3V/5V selectable output on two channels. The maximum current can be drawn is 700mA. The selection of the output voltage is independent on each channel and the user can select the output voltage by changing jumpers separately.
SKU: 0649 -
3D Printer Filaments, CNC & 3D Printers
ERYONE Standard PLA 1.75mm 3D Printer Filament 1kg/Roll
ERYONE Standard PLA Filament 1.75mm 3D Printer Filament, Dimensional Accuracy 1.75mm, 1kg(2.2lbs) Cardboard Spool 3D Printing Filament Fits for Most FDM 3D Printers. This High quality PLA Filament available at electrobes has weight of 1Kg.
SKU: PF-023 -
Discrete Electronic Components, ICs, Logic Gates
74LS30 8-input NAND Gate IC
- Operating voltage range: +4.75 to +5.25V
- Recommended operating voltage: +5V
- Maximum supply voltage:7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Typical Rise Time: 18ns
- Typical Fall Time: 18ns
- Operating temperature:0°C to 70°C
- Storage Temperature: -65°C to 150°C
SKU: 0409 -
Adapters, Batteries & Chargers
12V 5A 60W Power Supply Adapter LED Driver
12V power supplies (or 12VDC power supplies) are one of the most common power supplies in use today. In general, a 12VDC output is obtained from a 110VAC or 220VAC input using a combination of transformers, diodes and transistors.
SKU: CNC-289 -
Modules and Breakout Boards, Proximity/Distance Sensors, Sensors & Transducers
Proximity Switch SN04-N NPN Metal Detection Sensor for Metal Inspection
Modules and Breakout Boards, Proximity/Distance Sensors, Sensors & TransducersProximity Switch SN04-N NPN Metal Detection Sensor for Metal Inspection
This inductive proximity sensor will detect the presence of a metallic object within 5mm of the surface of the sensor. The detection distance may vary slightly depending on the shape, size, and type of metal the object is made of. It can detect through thin, non-metallic materials and has an LED indicator that turns on when the device is powered, and increases in brightness when an object is detected.
SKU: 1162 -
Discrete Electronic Components, ICs, Logic Gates
74LS02 Quad 2-input NOR Gate IC
- Operating voltage range: +4.75 to +5.25V
- Maximum supply voltage: 7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Maximum ESD: 3.5KV
- Typical Rise Time: 15ns
- Typical Fall Time: 15ns
- Operating temperature :0°C to 70°C
- Storage Temperature: -65°C to 150°C
- Operating temperature: 0°C to 75°C
SKU: 0401 -
Converters, Modules and Breakout Boards
RS485 to TTL UART Converter Module
RS485 to TTL / TTL to RS485 converter is a module that allows the TTL interface of the microcontroller to be transferred to the RS485 module / MAX485 module. It is generally used for industrial automation. This module adds lightning protection design and anti-jamming design. When we use it in the field and carry out long distance transmission, we can Connect the GND end of the module to the ground so that lightning protection and anti-interference can be achieved. This Max485 to TTL module is online in Pakistan at electrobes.
SKU: 0168 -
3D Printer Parts, CNC & 3D Printers
RAMPS 1.4 Reprap 12864 LCD Graphic Smart Controller Board for 3D Printers
3D Printer Parts, CNC & 3D PrintersRAMPS 1.4 Reprap 12864 LCD Graphic Smart Controller Board for 3D Printers
3D Printer Reprap Smart Controller 12864 LCD Display with Smart Controller Board for 3D Printer RAMPS 1.4 Reprap Mendel Prusa for Arduino 128×64 LCD Blue Color. We also have other related accessories for CNC and 3D printer machines in Pakistan.
SKU: CNC-172 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 7S 24V 50A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 7S 24V 50A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS Li-ion 7S 24V 50A BMS Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-021 -
-
-
Planes And Copters, Robotics & Machines
FlySky FS-T6 6 Channel 2.4 GHz Digital Radio Remote Control Transmitter & Receiver for RC Quadcopter
Planes And Copters, Robotics & MachinesFlySky FS-T6 6 Channel 2.4 GHz Digital Radio Remote Control Transmitter & Receiver for RC Quadcopter
The 6-channel FlySky FS-T6 is the perfect transmitter for sports modellers who want the power of a programmable transmitter but don’t necessarily need a lot of excess features they do not use. It includes all of the important features and programmable parameters to support a variety of helicopters, gliders, and aeroplanes. It even has the ability to store 20 models allowing the user to save a whole fleet of aircrafts.
SKU: RC-003 -
Audio & Visual, LCD & Display
7 Inch Nextion HMI Serial Touch Display Board Module NX8048T070 Multifunction HMI Resistive Touch
Audio & Visual, LCD & Display7 Inch Nextion HMI Serial Touch Display Board Module NX8048T070 Multifunction HMI Resistive Touch
The 7″ Nextion HMI LCD Capacitive Touch Display is a Seamless Human Machine Interface (HMI) display module solution that provides a control and visualization interface for any Raspberry Pi and Arduino kits. Nextion is mainly applied to lot or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube, and, it is best intelligent display module in the market.
SKU: 1719 -
Converters, Modules and Breakout Boards
PCF8591 ADC & DAC Analog to Digital and Digital to Analog Converter Module
-19%
Converters, Modules and Breakout BoardsPCF8591 ADC & DAC Analog to Digital and Digital to Analog Converter Module
The PCF8591 is a monolithically integrated, and a separate power supply, low-power, 8-bit CMOS data acquisition devices. The PCF8591 has the four analog inputs, one analog output and a serial I2C bus interface. PCF8591 three address pins A0, A1 and A2 can be used in hardware address programmed 8 PCF8591 device allows access to the same I2C bus, without the need for additional hardware. On the PCF8591 device input and output of the address, control and data signals are transmitted in serial fashion via the two-wire bidirectional I2C bus.
SKU: 0764 -
-
Converters, Modules and Breakout Boards
XL6009E1 1.3-35V 3A Auto Step Up/Down Buck/Boost DC-DC Converter
Converters, Modules and Breakout BoardsXL6009E1 1.3-35V 3A Auto Step Up/Down Buck/Boost DC-DC Converter
XL6009 module is a non-isolated step-up boost voltage converter featuring adjustable output voltage, high efficiency. It converts input voltage of 5-32V DC to an output voltage of 4-38V DC.
SKU: 1779 -
Planes And Copters, Robotics & Machines, Wireless Communication
TS5828 Micro 5.8G 600mW 40CH FPV Transmitter with Digital Display and FPV 1500TVL /1200TVL Camera Receiver UVC for FPV Drone
Planes And Copters, Robotics & Machines, Wireless CommunicationTS5828 Micro 5.8G 600mW 40CH FPV Transmitter with Digital Display and FPV 1500TVL /1200TVL Camera Receiver UVC for FPV Drone
Buy TS5828 5.8G Micro 40-CH FPV Video Transmitter AV in Pakistan. This is the newest version, add auto sweep and match frequency, graphical interface, snow screen 0.1s delay.
SKU: 0894 -
Buttons, Switches & Pads, Connectivity, Push Buttons
6 x 3.5 x 2.5mm SMD PCB Tactile Push Button Switch 2 Pin
Buttons, Switches & Pads, Connectivity, Push Buttons6 x 3.5 x 2.5mm SMD PCB Tactile Push Button Switch 2 Pin
- Product Name: Tact Switch
- Type: SPST
- Action Type: Momentary
- Terminal Number: 2
- Package Type: SMD/SMT
- Dimension: 3 x 6 x 2.5mm / 0.12″ x 0.24″ x 0.1″ (W*L*H)
- Button Size: 3 x 1.5mm / 0.12″ x 0.06″ (L*W)
- Material: Plastic, Metal, Electric Parts
- Color: Black, Silver Tone, White
- Contact Resistance: 100 MOhm max.
- Current rating: 12V 50mA
- Life: 100.000 cycles
- Net Weight: 9g
SKU: 0478 -
EV Parts, Mechanical, Motors and Driver
24V 250W Motor Controller Electric Bike Kit Electric Bicycle Conversion Kit For 20-28″ Electric Bicycle
-28%
EV Parts, Mechanical, Motors and Driver24V 250W Motor Controller Electric Bike Kit Electric Bicycle Conversion Kit For 20-28″ Electric Bicycle
- Environmentally friendly material, durable and easy to operate.
- This kit is suitable for installation on regular bicycles of 22-28 inches.
- This kit is not suitable for modification in special models and variable speed models.
- Motor use freewheel so when wheel rotating, the motor will not rotate, just like a normal bike, this can reduce resistance.
- This item doesn’t include battery or charger.
SKU: EB-05 -
3D Printers, CNC & 3D Printers, DLP/SLA/Resin 3D Printer
ANYCUBIC Photon Mono M7 PRO 14K Resin 3D Printer
3D Printers, CNC & 3D Printers, DLP/SLA/Resin 3D PrinterANYCUBIC Photon Mono M7 PRO 14K Resin 3D Printer
ANYCUBIC Photon Mono M5s Pro Resin 3D Printer 14K HD Mono Chrome LCD 3x High Speed Printing Auto leveling Intelligent Detection Large Printing Volume resin SLA 3d printer available in Pakistan
SKU: TDP-044 -
Planes And Copters, Robotics & Machines
Flysky FS-i6X 10CH Transmitter 2.4GHz AFHDS 2A RC Transmitter With FS-iA10B i-Bus Receiver
Planes And Copters, Robotics & MachinesFlysky FS-i6X 10CH Transmitter 2.4GHz AFHDS 2A RC Transmitter With FS-iA10B i-Bus Receiver
Original Flysky 10CH FS-i6X I6X 2.4GHz AFHDS Transmitter FS-iA10B Receiver For RC Airplane, Drones, Boat, Multi-rotor and Quadcopter available at electrobes at best price to shop in Pakistan
SKU: RC-012 -
DIP Transistors, Discrete Electronic Components, Transistors
BD137 1.5 A 60V NPN Bipolar Power Transistor
DIP Transistors, Discrete Electronic Components, TransistorsBD137 1.5 A 60V NPN Bipolar Power Transistor
- Type – NPN
- Collector-Emitter Voltage: 60 V
- Collector-Base Voltage: 60 V
- Emitter-Base Voltage: 5 V
- Collector Current: 1.5 A
- Collector Dissipation – 12.5 W
- DC Current Gain (hfe) – 40 to 250
- Operating and Storage Junction Temperature Range -55 to +150 °C
- Package – TO-126
SKU: 0447 -
-
3D Printers, CNC & 3D Printers, FDM 3D Printers
CREALITY Ender-5 Plus FDM 3D Printer with Largest 350*350*400mm Build Volume
-6%
3D Printers, CNC & 3D Printers, FDM 3D PrintersCREALITY Ender-5 Plus FDM 3D Printer with Largest 350*350*400mm Build Volume
The Ender 5 Plus is a feature-rich 3D printer offering a large build volume, stable performance, and easy assembly. With a sizable 350x350x400mm print area, it enables the creation of impressive models and prototypes. Equipped with a robust frame, dual-axis stepper motors, and a direct drive extruder, it ensures precise and reliable prints.
The user-friendly interface and quick assembly process make it accessible to both beginners and experienced users, while its compatibility with various filaments expands the possibilities for creative projects. The Ender 5 Plus is a versatile and reliable choice for 3D printing enthusiasts available at electrobes at the best price online in Pakistan
SKU: TDP-014 -
Audio & Visual, LCD & Display
MAX7219 Dot LED Matrix 4×1 Module MCU Control Unit
- MAX7219 is an integrated serial input / output common-cathode display driver, it connects the microprocessor 7-segment digital LED display with 8 digits, you can also connect a bar graph display or 64 independent LED. Thereon including a B-type BCD encoder chip, multi-channel scanning loop segment word driver, but also a static RAM 8 * 8 for storing each data. Only one external register is used to set the segment current of each LED.
- A convenient four-wire serial interface can be connected to all general-purpose microprocessor. Each data can be addressed in the update do not need to rewrite all of the display. MAX7219 also allows each user to select a data coding or non-coding.
- The entire device contains a 150μA low-power shutdown mode, analog and digital brightness control, a scan-limit register allows the user to display data bits 1-8, and one for all LED luminescence detection mode.
- It requires only three IO ports to drive a dot matrix! No flicker when the dot matrix display! Support cascading!
SKU: 1226 -
Discrete Electronic Components, General ICs, ICs
LM339 VOLTAGE COMPARATOR IC
- Operating voltage range: +4.75 to +5.25V
- Recommended operating voltage: +5V
- Maximum supply voltage:7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Typical Rise Time: 18ns
- Typical Fall Time: 18ns
- Operating temperature:0°C to 70°C
- Storage Temperature: -65°C to 150°C
SKU: 0422 -
-
Discrete Electronic Components, Potentiometer & Knobs, Resistors
100K Ohm Rotary Potentiometer / Variable Resistor
Discrete Electronic Components, Potentiometer & Knobs, Resistors100K Ohm Rotary Potentiometer / Variable Resistor
- Linear Taper Rotary Type Potentiometer
- Model: B1M
- PCB Mounted
- Breadboard Friendly
- Resistance Value: 1M ohm
- Power: 1/2W
- Adjustment Type: Top Adjustment
- Type: Single Linear (Type B)
- Features: Knurled Shaft
- Shaft Diameter: 6mm / 0.23″
- Shaft Length: 13mm / 0.51″
- Mounting Hole: 7.5mm / 0.29″
- Base Height: 7mm / 0.27″
- Base Diameter: 16mm / 0.62″
- Material: Metal w Electronic Parts
- Color: As Shown In Picture
- Weight: 5g
SKU: 0204 -
-
Crystal Oscillators, Discrete Electronic Components
11.0592Mhz Crystal Oscillator
- 18pF of Load Capacitance
- Frequency Tolerance(Ƹf/f) range is ± 30ppm
- Frequency Temperature Stability range is ±50ppm
- Resonance Resistance 40ohms (max)
- Oscillation mode: Fundamental mode
- Shunt Capacitance less than 7pF
- Drive Level less than 100µW
- Operating Temperature Range: -20 to + 70°C
- Operable Temperature Range: -25 to + 85°C
- Storage Temperature Range: -55 to + 125°C
- Insulation Resistance: 500 M ohms
SKU: 0526 -
Converters, Modules and Breakout Boards
LM2596 DC 6V-40V To 5V 3A Double USB Charge DC-DC Step-down Converter Module
-10%
Converters, Modules and Breakout BoardsLM2596 DC 6V-40V To 5V 3A Double USB Charge DC-DC Step-down Converter Module
Dual USB Output LM2596 Buck Converter is a step down module and has a dual 5V output for charging Phone, MP3, MP4, PSP, or powering Arduino, Raspberry Pi, etc. 100% Brand new and high quality! This module has short circuit protection DIY Mobile Power Supply with two 5V output USB ports with 3A output current.
SKU: 1611 -
Breadboards, Protoboards & PCBs, Discrete Electronic Components
12×12 inch Clear Acrylic Sheet Cast Plexiglass Plastic Sheet
Breadboards, Protoboards & PCBs, Discrete Electronic Components12×12 inch Clear Acrylic Sheet Cast Plexiglass Plastic Sheet
12″ x 12″ Clear Acrylic Sheet Cast Plexiglass Plastic Sheet 0.08″ 2mm Thick, for Lamps, Construction, Handicrafts, Model Making and Hobby Use at best price online in Pakistan
SKU: 1548 -
Discrete Electronic Components, ICs, Logic Gates
74LS10 Tripple 3 input NAND Gate IC
- Operating voltage range: +4.75 to +5.25V
- Recommended operating voltage: +5V
- Maximum supply voltage:7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Typical Rise Time: 18ns
- Typical Fall Time: 18ns
- Operating temperature:0°C to 70°C
- Storage Temperature: -65°C to 150°C
SKU: 0407 -
Breakout Boards, Modules and Breakout Boards
Tiny RTC I2C DS1307 AT24C32 Real Time Clock Module
- The DS1307 is a low power consumption real-time clock chip with a full BCD code clock calendar, providing accurate timekeeping for various applications.
- Featuring a 24C32 32K I2C EEPROM memory, the chip can store and retrieve data efficiently, ensuring the preservation of important information.
- The clock pin of the DS1307 can be used to provide the clock signal for connected microcontrollers, enabling seamless integration and synchronization within a system.
- This versatile chip allows for cascading of other I2C devices, expanding the functionality and capabilities of the overall system.
- Equipped with a range of advanced features, including leap year compensation, power failure detection, and programmable square wave output, the DS1307 offers reliable and efficient timekeeping solutions.
SKU: 0175 -
Robotics & Machines, Stepper Motors & Drivers
Nema17 6-12V Stepper motor 1.8/step 6 Wire (Used)
NEMA17 6 Wire Bipolar Stepper Motor NEMA17 Stepper Motor NEMA 17 Stepper Motors very useful in the various application especially which demands low speed with high precision Many machines such as 3D Printers CNC Router and Mills Camera Platforms XYZ Plotters etc Nema17 4 wire Bipolar Stepper.
SKU: 1591 -
3D Printers, CNC & 3D Printers, FDM 3D Printers
Official CREALITY K1 Max Fastest FDM 3D Printer with 600mm/s Max. Speed 300x300x300mm Printing Volume
3D Printers, CNC & 3D Printers, FDM 3D PrintersOfficial CREALITY K1 Max Fastest FDM 3D Printer with 600mm/s Max. Speed 300x300x300mm Printing Volume
Creality K1 Max 3D Printers, 600mm/s Max Speed 20000mm/s² Acceleration 32mm³/s Max Flow Hotend Hands-Free Auto Leveling Dual Cooling and 300mm printing volume is available at electrobes at the best price online in Pakistan
SKU: TDP-012 -
-
Compatibles for Arduino, Mainboards, Modules and Breakout Boards
Transparent Acrylic Case Shell For Arduino Mega R3
Compatibles for Arduino, Mainboards, Modules and Breakout BoardsTransparent Acrylic Case Shell For Arduino Mega R3
This MEGA 2560 acrylic enclosure fits the Arduino Mega 2560 and compatible boards. The enclosure helps to protect the board while still providing access to the connectors and reset button.
It comes with the 3mm thick acrylic pieces and the hardware required to assemble the case and to mount the Arduino Mega 2560 or compatible board inside the case. It does not come with the Mega 2560.
SKU: 0799 -
3D Printer Parts, CNC & 3D Printers
3D Printer filament sensor detection module 1.75mm
3D Printer filament sensor detection module is used to detect filament. Some times filament breaks so the sensor detects it.
Used with Lerdge board:
When there is filament in, the green light in the module keeps lighting. And when the filament is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the filament can continue to print.
Wiring: Connect the module to the M-sensor port on the motherboard.SKU: CNC-137 -
Arduino Shield, Compatibles for Arduino, Modules and Breakout Boards
Prototyping Prototype Shield with Mini Breadboard compatible with Arduino MEGA 2560 R3
Arduino Shield, Compatibles for Arduino, Modules and Breakout BoardsPrototyping Prototype Shield with Mini Breadboard compatible with Arduino MEGA 2560 R3
- EASY TO INSTALL: Due to its compact design, it can be easily installed on the MEGA 2560 and other similar modules
- SEVERAL APPLICATIONS: With the included Mini Breadboard you can easily wire up various projects directly on the microcontroller
- READY TO USE: Thanks to the integrated buttons and LED, the input and output possibilities are simple, no additional parts or wiring are required – ready to work!
SKU: 1692 -
Buttons, Switches & Pads, Connectivity, Push Buttons
5x5x1.5mm Momentary Tactile PCB SMD Mount 4P Push Button
Buttons, Switches & Pads, Connectivity, Push Buttons5x5x1.5mm Momentary Tactile PCB SMD Mount 4P Push Button
- Product Name: Tact Switch
- Type: SPST
- Action Type: Momentary
- Pin Number: 4
- Dimension: 5x5x1.5mm/0.2×0.2×0.06 inch
- Button Diameter: 2mm/0.08inch
- Material: Plastic, Metal, Electric Parts
- Color:Black, Yellow, Silver Tone
- Net Weight: 6g
SKU: 0477 -
Modules and Breakout Boards, Relay Boards
12V 2 Channel 10A Relay Module
- Operating Voltage: 12V DC
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- Mounting holes provided
SKU: 1725 -
DIP Transistors, Discrete Electronic Components, Transistors
2N2222 NPN Transistor
- Bi-Polar high current NPN Transistor
- DC Current Gain (hFE) is 100
- Continuous Collector current (IC) is 800mA
- Emitter Base Voltage (VBE) is 6V
- Collector Emitter Voltage (VCE) is 30V
- Base Current(IB) is 5mA maximum
SKU: 0452 -
-
Instruments & Tools, Meters
Mini Panel Mount Thermometer and Hygrometer Humidity Meter with Display
-13%
Instruments & Tools, MetersMini Panel Mount Thermometer and Hygrometer Humidity Meter with Display
This is Mini Hygrometer has dual readouts in one easy-to-use unit. This Hygrometer is best choice as compare to HTC 1 Meter and has a convenient size and quality construction. This Hygrometer is suitable for panel mounting. This digital incubator hygrometer humidity meter00 is with dependable reading with high accuracy. This incubator digital meter is with a remote sensor with 20cm of cable. Best FY12 incubator meter with probe, the display can be mounted outside of any object which you want to measure, while the sensor is inside getting an accurate reading.
SKU: 1082 -
-
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 13S 48V 20A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 13S 48V 20A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS Li-ion 13S 48V 20A BMS Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-008 -
Audio & Visual, LCD & Display
7 Inch HMI LCD Display Touch Panel with Shell DMG80480C070_15WTR (Commercial grade)
Audio & Visual, LCD & Display7 Inch HMI LCD Display Touch Panel with Shell DMG80480C070_15WTR (Commercial grade)
The 7 inch HMI LCD Resistive Touch Display with Shell is a Seamless Human Machine Interface (HMI) display module solution that provides a control and visualization interface for any Raspberry Pi and Arduino kits.
SKU: 1848 -
Consumer Electronics, Educational & DIYs, Tools & Accessories
PBC1 Power Bank Housing with PCB and 2x 18650 Cells Compartment
Consumer Electronics, Educational & DIYs, Tools & AccessoriesPBC1 Power Bank Housing with PCB and 2x 18650 Cells Compartment
DIY Power bank housing shell with Digital LCD display PCB and night high intensity LED torch, 1 USB port, 1 Led backup status, Charge and discharge protection, Built-in lithium battery protection IC on the circuit board, over and under voltage protection and over current protection.
SKU: 1758 -
Adapters, Batteries & Chargers
5V 60A 300W DC Universal Regulated Switching Power Supply
12V power supplies (or 12VDC power supplies) are one of the most common power supplies in use today. In general, a 12VDC output is obtained from a 110VAC or 220VAC input using a combination of transformers, diodes and transistors.
SKU: CNC-196 -
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry Pis
Raspberry Pi 4 Case, Raspberry Pi 4 Fan ABS Case With Cooling Fan – Red and White
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry PisRaspberry Pi 4 Case, Raspberry Pi 4 Fan ABS Case With Cooling Fan – Red and White
- Newest ABS case for Raspberry Pi 4 Model B.
- Full access to all Raspberry Pi 4 ports, such as GPIO port, Micro HDMI port, USB port, SD CARD slot.
- Support install the cooling fan on the cover , don’t worry the mainboard be over heat.
- Sliding design cover , make it more convenient to use.
- ABS material is stronger and light , won’t block the WiFi and bluetooth.
SKU: 1167 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS LFP LifePo4 8S 24V 100A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS LFP LifePo4 8S 24V 100A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
DALY BMS 8S 24V LifePO4 PCB Protection Board with Balance Wire and Temperature Sensor for 8 3.2V Cells 24V LiFePO4 Lithium Battery Pack with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-031 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 3S 12V 50A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 3S 12V 50A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS Li-ion 3S 12V 50A BMS Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-002 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
JK Smart BMS LFP Li-ion 8S-24S 200A BMS Battery Management System for Li-ion Lifepo4 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsJK Smart BMS LFP Li-ion 8S-24S 200A BMS Battery Management System for Li-ion Lifepo4 Battery Pack Balanced Charging Board
JKBMS is a leading brand in power battery management systems (BMS), dedicated to advancing “active balancing technology for lithium batteries.”
- Active Balancing: Optimizes battery performance and lifespan.
- Wireless Communication: Allows real-time monitoring and control.
- Functional Safety: Ensures safety and reliability across applications.
- Capacity Management: Boosts battery efficiency and utilization.
SKU: BMS-046 -
Buttons, Switches & Pads, Connectivity, Power Switches
KCD1 Rocker Switch Mini Simple
- 20A 125VAC / 16A 250VAC (UL,CUL)
- 6A 125VL, 3/4HP 250VAC(UL, CUL)
- 16(4) A 250VAC~T125 (VDE,ENEC, CQC)
- Initial contact resistance : 20m ohm max.
- Insulation resistance : 100M ohm min, at 500VDC
- Dielectric strength : 1,000VAC (UL), 3000 VAC(VDE) for 1 minute
- Electrical Life: 6000 (UL); 10000 (VDE) cycles
SKU: 0498 -
-
Discrete Electronic Components, General ICs, ICs
CD4014 8-Bit Static Shift Register IC
- CD4014 8-BIT STATIC SHIFT REGISTER IC
- Package / Case: PDIP-16
- RoHS: Yes
- Register Logic IC
- Logic Type:Shift Register
- Frequency Max:17MHz
- Power Dissipation, Pd:500mW
- Input Current:1µA
- Operating Temperature Range:-55°C to +125°C
- Leaded Process Compatible:Yes
SKU: 0230 -
Essential tools, Instruments & Tools
Metal 6-Inch 150mm Stainless Steel Digital Vernier Caliper
This digital caliper’s stainless steel construction allows you to get metric or SAE decimal readings even in harsh conditions. The easy-to-read digital display allows you to measure and convert from SAE to metric quickly and easily.
SKU: 1667 -
Adapters, Batteries & Chargers
12V 10A 120W Switching Power Supply Driver
12V power supplies (or 12VDC power supplies) are one of the most common power supplies in use today. In general, a 12VDC output is obtained from a 110VAC or 220VAC input using a combination of transformers, diodes and transistors.
SKU: CNC-185 -
3D Printer Filaments, CNC & 3D Printers
SUNLU PETG 1.75mm 1KG 3D Printer Filament
SUNLU PETG Filament is a material used by 3D printers that uses 1.75mm of filament, available at Electrobes in Pakistan. The SUNLU PETG filaments comes in various colors that we hold in our stock . This PETG Filament has weight of 1Kg/roll.
SKU: PF-033 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 13S 48V 30A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 13S 48V 30A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS Li-ion 13S 48V 30A BMS Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-009 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
JK Smart BMS LFP Li-ion 8S-24S 40A BMS Battery Management System for Li-ion Lifepo4 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsJK Smart BMS LFP Li-ion 8S-24S 40A BMS Battery Management System for Li-ion Lifepo4 Battery Pack Balanced Charging Board
JKBMS is a leading brand in power battery management systems (BMS), dedicated to advancing “active balancing technology for lithium batteries.”
- Active Balancing: Optimizes battery performance and lifespan.
- Wireless Communication: Allows real-time monitoring and control.
- Functional Safety: Ensures safety and reliability across applications.
- Capacity Management: Boosts battery efficiency and utilization.
SKU: BMS-047 -
Converters, Modules and Breakout Boards
PWM DC Motor Speed Controller Switch DC 20A Current Voltage Regulator 10-60V PWM High Power Drive Module 60A 12V 24V 36V 48V
-19%
Converters, Modules and Breakout BoardsPWM DC Motor Speed Controller Switch DC 20A Current Voltage Regulator 10-60V PWM High Power Drive Module 60A 12V 24V 36V 48V
This is a simple and easy-to-use 20A High Power DC motor speed controller of small size, elegant appearance and stable performance. It is made with high quality circuit board which ensures a longer service life. Buy online in Pakistan
SKU: 1577
