[vc_row][vc_column]
-
3D Printers, CNC & 3D Printers, FDM 3D Printers
Elegoo Neptune 4 Plus FDM 3D Printer 500mm/s High Speed Printing, 300°C High temperature Nozzle 320x320x385mm Printing Size
3D Printers, CNC & 3D Printers, FDM 3D PrintersElegoo Neptune 4 Plus FDM 3D Printer 500mm/s High Speed Printing, 300°C High temperature Nozzle 320x320x385mm Printing Size
- Print Volume: 320 x 320 x 385 mm³
- Max Printing Speed: 500 mm/s
- 121 (11 x 11) Points Auto Bed Leveling
- Up To 300 °C High-Temp Nozzle
- Support PLA/TPU/PETG/ABS/ASA/Nylon Filaments
- WIFI / WLAN / USB Transfer
SKU: TDP-053 -
Adapters, Batteries & Chargers
24V 1A 24W Switching Mode Power Supply SMPS Adapter
24V power supplies (or 24VDC power supplies) are one of the most common power supplies in use today. In general, a 24V DC output is obtained from a 110VAC or 220VAC input using a combination of transformers, diodes and transistors.
SKU: CNC-186 -
Robotics & Machines, Stepper Motors & Drivers
DRV8825 Stepper Motor Driver Soldered Pins with Heat Sink
-27%
Robotics & Machines, Stepper Motors & DriversDRV8825 Stepper Motor Driver Soldered Pins with Heat Sink
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 micro stepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of the A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
SKU: 0752 -
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry Pis
Raspberry Pi 4 Case, Raspberry Pi 4 Fan ABS Case With Cooling Fan – Red and White
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry PisRaspberry Pi 4 Case, Raspberry Pi 4 Fan ABS Case With Cooling Fan – Red and White
- Newest ABS case for Raspberry Pi 4 Model B.
- Full access to all Raspberry Pi 4 ports, such as GPIO port, Micro HDMI port, USB port, SD CARD slot.
- Support install the cooling fan on the cover , don’t worry the mainboard be over heat.
- Sliding design cover , make it more convenient to use.
- ABS material is stronger and light , won’t block the WiFi and bluetooth.
SKU: 1167 -
Planes And Copters, Robotics & Machines
HOTRC HT-10A 2.4GHz 10 Channels RC Transmitter and Receiver FHSS & 10CH Receive for FPV Drone RC Airplane Aircraft Boat Car Helicopter
Planes And Copters, Robotics & MachinesHOTRC HT-10A 2.4GHz 10 Channels RC Transmitter and Receiver FHSS & 10CH Receive for FPV Drone RC Airplane Aircraft Boat Car Helicopter
The Hotrc HT-10A 2.4GHz 10 Channels RC Transmitter and Receiver FHSS & 10CH Receiver for FPV Drone RC Airplane Aircraft Boat Car Helicopter is a simple, easy-to-use system that performs as well as working speed and range. Ideal for new riders or as an entry point into the Hobby.
SKU: RC-023 -
Audio & Visual, LCD & Display
7 Inch HMI LCD Display Touch Panel DMG80480C070_04WTC (Commercial grade)
Audio & Visual, LCD & Display7 Inch HMI LCD Display Touch Panel DMG80480C070_04WTC (Commercial grade)
The 7 inch HMI LCD Touch Display is a Seamless Human Machine Interface (HMI) display module solution that provides a control and visualization interface for any Raspberry Pi and Arduino kits.
SKU: 1845 -
-
3D Printer Parts, CNC & 3D Printers
BIGTREETECH Octopus V1.1 Control Board 32bit Compatible TFT Series Screen, Support DIY Klipper Firmware and Raspberry Pi Online Printing for Voron V2.4 Upgrade 3D Printer
3D Printer Parts, CNC & 3D PrintersBIGTREETECH Octopus V1.1 Control Board 32bit Compatible TFT Series Screen, Support DIY Klipper Firmware and Raspberry Pi Online Printing for Voron V2.4 Upgrade 3D Printer
BIGTREETECH Octopus Pro is a very powerful motherboard with 8 stepper driver support, so this motherboard can control up to 8 different axes. This feature is especially suitable for multi-colour printing and tool changer, for the use of different tools/modules such as different 3D print heads, laser engraving, laser cutting etc.
The mainboard is compatible with Klipper, RepRap and Marlin and supports Raspberry Pi and Octoprint. FDM 3d printers are available at electrobes. You can buy this kit at the best price online in Pakistan.
SKU: CNC-270 -
3D Printer Parts, CNC & 3D Printers
Titanium Alloy Heatbreak Throat for V6 RepRap 3D Printer Hotend 1.75mm Filament
3D Printer Parts, CNC & 3D PrintersTitanium Alloy Heatbreak Throat for V6 RepRap 3D Printer Hotend 1.75mm Filament
3D printer accessories E3D V6 titanium alloy red copper throat gold-plated high temperature resistant M7 thread. Electrobes has accessories and parts for CNC & 3D printers.
SKU: CNC-321 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 20S 72V 30A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 20S 72V 30A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS 20S 72V Lithium Li Ion Battery Pack BMS With Balance And Waterproof 30A 40A 50A 60A Used For 72V E-bike Scooter PCB PCM Board Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-017 -
-
Instruments & Tools, Oscilloscope
UNI-T UPO2104E Digital Oscilloscopes with 4 Analog Channels, 8inch LCD and 100MHz Frequency 1GS/s
Instruments & Tools, OscilloscopeUNI-T UPO2104E Digital Oscilloscopes with 4 Analog Channels, 8inch LCD and 100MHz Frequency 1GS/s
- Digital fluorescent display 256-level grayscale display capability, timely reflecting the probability of the appearance of the waveform, and the waveform change is clearly visible.
- Excellent storage depth Excellent storage depth Up to 56Mpts storage depth, users can capture longer Time signal without losing waveform details.
- Up to 80,000wfms/s waveform capture rate Up to 80,000wfms/s waveform capture rate, discover occasional problems in time, greatly improve the ability to capture extremely low-probability events, and observe signal jitter and glitches more intuitively
- Independent time base adjustable The time base of each channel is independently adjustable, which is convenient for users to observe four channels of frequencies at the same time Significantly different signals
- Rich data measurement functions Support 34 kinds of automatic measurement parameter functions, Support Zoom, Math, statistics and advanced calculation functions.
SKU: DM-022 -
CNC & 3D Printers, Resin
JAMG HE High Impact Resistant Flexible Resin 3D Printer Resin for DLP LCD MONO (250G)
CNC & 3D Printers, ResinJAMG HE High Impact Resistant Flexible Resin 3D Printer Resin for DLP LCD MONO (250G)
Shock resistance, anti-folding
Flexibility with little elasticity.
High speed printing and reduced distortion.
High-precision printing with smooth surface.
Non VOC, RoHS REACH, EN71-3 certified
SKU: PF-013 -
Audio & Visual, Computer Interface
Samsung EVO Plus 16GB MicroSDHC Memory Card Class 10
This 16GB microSDHC Memory Card Class 10 from Samsung is ideal for use with multimedia mobile phones or any other device that uses microSDHC cards. Expand your entertainment storage with up to 16GB of extra music, videos, photos, games, software, and comes with 6 months warranty to relax your mind. It can be used with Raspberry Pi and Arduino SD card module available online in Pakistan at electrobes.
SKU: SD-003 -
3D Printer Filaments, CNC & 3D Printers, EXYZ Filaments
EXYZ PETG 1.75mm 3D Printer Filament 1kg/Roll
3D Printer Filaments, CNC & 3D Printers, EXYZ FilamentsEXYZ PETG 1.75mm 3D Printer Filament 1kg/Roll
EXYZ PETG Filament 1.75mm, PETG 3D Printer Filament, Dimensional Accuracy 1.75mm, 1kg(2.2lbs) Cardboard Spool 3D Printing Filament Fits for Most FDM 3D Printers. This High quality PETG Filament available at electrobes has weight of 1Kg.
SKU: PF-028 -
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry Pis
HDMI Female To Micro HDMI Male Adapter
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry PisHDMI Female To Micro HDMI Male Adapter
- Color: Black
- 100% Brand New
- Suggested Applications: HDTVs, HD DVs, Camera, Game Consoles With HDMI And HDMI Type C Mini Connectors
- Convert Your HDMI Cable To Any HDMI Mini Connection.
SKU: 1688 -
Discrete Electronic Components, General Electronics
SYD1230 12mm 5mw Red CROSS LINES Laser Module
- Laser Output Type: Red CROSS-LINE Laser
- Dimensions: Diameter: 12mm, Length: 35mm.
- Weight: 15 gm.
- Wavelength: 650nm.
- Voltage: 3~6V.
- Output Power: Min 2.5mW, Typical 3.0mW, Max 5.0mW.
- Working current: Min 10mA, Typical 20mA, Max 25mA.
- Focus point Intensity can be adjusted with help of lens ring head.
SKU: 1397 -
Accessories, Batteries & Chargers
Handheld Portable DIY Spot Welder Mini Spot Welding Machine With Quick Release Pen Nickel Plate 18650 Battery Spot Welder DH20 Pro+
-22%
Accessories, Batteries & ChargersHandheld Portable DIY Spot Welder Mini Spot Welding Machine With Quick Release Pen Nickel Plate 18650 Battery Spot Welder DH20 Pro+
Handheld Portable DIY Spot Welder Mini Spot Welding Machine With Quick Release Pen Nickel Plate 18650 Battery Spot Welder DH20 Pro+. Buy in Pakistan
SKU: 1579 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS LFP LifePo4 16S 48V 100A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS LFP LifePo4 16S 48V 100A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
DALY BMS 16S 48V LifePO4 PCB Protection Board with Balance Wire and Temperature Sensor for 16 3.2V Cells 48V LiFePO4 Lithium Battery Pack with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-030 -
Essential tools, Instruments & Tools
Volder PS-305D Adjustable DC Power Supply (0~30V/5A)
The KADA PS-305D is a popular regulated power supply, often used in electronics labs and by hobbyists. It typically features adjustable voltage and current settings, allowing you to output a range of voltages (usually up to 30V) and currents (up to 5A). The dual display shows both the set and actual voltage/current, making it easy to monitor your settings.
SKU: 1852 -
Discrete Electronic Components, ICs, Microcontrollers
Atmel 8051 AT89C51 AVR 40 Pin DIP Microcontroller
Discrete Electronic Components, ICs, MicrocontrollersAtmel 8051 AT89C51 AVR 40 Pin DIP Microcontroller
- Compatible with MCS-51 Products
- 4K Bytes of In-System Reprogrammable Flash Memory
- Endurance: 1,000 Write/Erase Cycles
- Fully Static Operation: 0 Hz to 24 MHz
- Three-Level Program Memory Lock
- 128 x 8-Bit Internal RAM
- 32 Programmable I/O Lines
- Two 16-Bit Timer/Counters
- Six Interrupt Sources
- Programmable Serial Channel
- Low Power Idle and Power Down Modes
SKU: 1451 -
Modules and Breakout Boards, Proximity/Distance Sensors, Sensors & Transducers
LJ12A3-4-Z/BY PNP Inductive Proximity Sensor Switch DC 6V-36V
Modules and Breakout Boards, Proximity/Distance Sensors, Sensors & TransducersLJ12A3-4-Z/BY PNP Inductive Proximity Sensor Switch DC 6V-36V
- Mounting hole diameter: 12mm
- Detecting distance: 4mm
- Working voltage: 10-30 VDC
- Current output: 200mA
- Output type: NPN/PNP NO(Normally Open)
- Set distance: 0-3.6mm
- Detect Object: Magnetic Metal
SKU: 1693 -
3D Printer Filaments, CNC & 3D Printers
Creality Ender Series PLA 1.75mm 3D Printer Filament 1kg/Roll
3D Printer Filaments, CNC & 3D PrintersCreality Ender Series PLA 1.75mm 3D Printer Filament 1kg/Roll
PLA Filament is a material used by 3D printers. The wire diameter of filament is 1.75mm available at Electrobes in Pakistan. Buy online 1.75mm PLA filament in Pakistan. The available colors are Army Green, Black, Blue, Bronze, Brown, Coffee, Dark Blue, Dark Orange, Dark Purple, Gold, Green, Grey, Lake Blue, Light Green, Orange, Pink, Purple, Red, Silver, Skin, Sky Blue, White, Wood and Yellow. This PLA Filament available at electrobes has weight of 1Kg.
SKU: PF-030 -
-
-
Discrete Electronic Components, Modules and Breakout Boards, Transformers, Voltage, Current & Power
ZMCT103C 5A Range Single Phase AC Transformer Sensor Module for Arduino
Discrete Electronic Components, Modules and Breakout Boards, Transformers, Voltage, Current & PowerZMCT103C 5A Range Single Phase AC Transformer Sensor Module for Arduino
ZMCT103C 5A Range is Single Phase AC Transformer Sensor Module for Arduino generates a signal proportional. Buy online in Pakistan at Electrobes
SKU: 0636 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 13S 48V 30A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 13S 48V 30A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS Li-ion 13S 48V 30A BMS Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-009 -
Microcontrollers & Programmers, Modules and Breakout Boards
51 AVR Programmer ISP USBASP USB ISP Download Cable
Microcontrollers & Programmers, Modules and Breakout Boards51 AVR Programmer ISP USBASP USB ISP Download Cable
Applicable to WIN 8.1/8/7/XP 32-bit/64-bit system computer.
The product can be directly connected with the computer USB port, the real USB download device, through which to connect the target board the microcontroller can be downloaded programming easy to use, especially for notebook computers, desktop computer, through the USB port programming download debugging.SKU: 1406 -
Essential tools, Instruments & Tools
PVC 1.8m Anti Static ESD Wrist Strap Discharge Band Grounding Prevent Static Shock
Essential tools, Instruments & ToolsPVC 1.8m Anti Static ESD Wrist Strap Discharge Band Grounding Prevent Static Shock
- Simply wrap strap around wrist and clip to a grounded source.
- Prevent Static shock in dry environment.
- Keep static from damaging electronic parts and equipment.
- Adjustable wrist strap with alligator clip tip.
- Inner conducting layer made of stainless shell filaments.
- Durable Polyurethane Coated Coil Cords.
- High Quality Strain relief.
- Soft elastic band for comfort.
SKU: 1766 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS LFP LifePo4 8S 24V 50A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS LFP LifePo4 8S 24V 50A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
DALY BMS 8S 24V LifePO4 PCB Protection Board with Balance Wire and Temperature Sensor for 8 3.2V Cells 24V LiFePO4 Lithium Battery Pack with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-043 -
Discrete Electronic Components, General Electronics, General Sensors, Modules and Breakout Boards, Sensors & Transducers
A3144E 44E Linear Hall Effect Sensor
Discrete Electronic Components, General Electronics, General Sensors, Modules and Breakout Boards, Sensors & TransducersA3144E 44E Linear Hall Effect Sensor
- Power supply voltage VCC: 4 to 24V
- Output reverse breakdown voltage Vce : 50V
- Output low current IOL : 50mA
- Ambient temperature TA: E profile : -20 ~ 85°C , L profile : -40 ~ 150°C
- Storage temperature range TS : -65 ~ 150 °C
SKU: 096 -
-
Audio & Visual, LCD & Display
MAX7219 Dot LED Matrix 4×1 Module MCU Control Unit
- MAX7219 is an integrated serial input / output common-cathode display driver, it connects the microprocessor 7-segment digital LED display with 8 digits, you can also connect a bar graph display or 64 independent LED. Thereon including a B-type BCD encoder chip, multi-channel scanning loop segment word driver, but also a static RAM 8 * 8 for storing each data. Only one external register is used to set the segment current of each LED.
- A convenient four-wire serial interface can be connected to all general-purpose microprocessor. Each data can be addressed in the update do not need to rewrite all of the display. MAX7219 also allows each user to select a data coding or non-coding.
- The entire device contains a 150μA low-power shutdown mode, analog and digital brightness control, a scan-limit register allows the user to display data bits 1-8, and one for all LED luminescence detection mode.
- It requires only three IO ports to drive a dot matrix! No flicker when the dot matrix display! Support cascading!
SKU: 1226 -
-
3D Printer Filaments, CNC & 3D Printers, EXYZ Filaments
JAMG HE Glass Fiber PLA Filament 1.75mm 3D Printer Filament 1kg/Roll
3D Printer Filaments, CNC & 3D Printers, EXYZ FilamentsJAMG HE Glass Fiber PLA Filament 1.75mm 3D Printer Filament 1kg/Roll
- Top pick for 3D printing enthusiasts who prioritize quality and performance
- Reinforced with 15% fiberglass, this filament offers outstanding rigidity and impact resistance, outperforming standard PLA
- Widely Compatible with most 3D Printers
- Suitable for crafting gears or temporary functional parts
SKU: PF-048 -
-
Modules and Breakout Boards, Wireless Communication
SIM900A BOARD 1800/1900 MHZ GSM GPRS MODULE (Non-PTA Approved)
Modules and Breakout Boards, Wireless CommunicationSIM900A BOARD 1800/1900 MHZ GSM GPRS MODULE (Non-PTA Approved)
SIM900A is an ultra-compact and reliable wireless module. It is a Dual-band GSM/GPRS module in a SMT type and is great for wireless cost-effective solutions.
Featuring an industry-standard interface, the SIM900A delivers GSM/GPRS 900/1800MHz performance for voice, SMS, and GPRS in a small form factor and with low power consumption. With a tiny configuration of 24mm x 24mm x 3 mm, SIM900A can fit almost all the space requirements in your applications, especially for slim and compact demand of design.
SKU: 0891 -
Modules and Breakout Boards, Proximity/Distance Sensors, Sensors & Transducers
PR12-4DN M12 NPN Inductive Proximity Sensor with 4mm Sensing Distance Cylinder Inductive Switch
Modules and Breakout Boards, Proximity/Distance Sensors, Sensors & TransducersPR12-4DN M12 NPN Inductive Proximity Sensor with 4mm Sensing Distance Cylinder Inductive Switch
PR12-4DN M08 NPN Inductive Proximity Sensor with 2mm Sensing Distance Cylinder Inductive Switch is an Anti Vibration, Dust, Water, Oil Prevention, Reverse Power Protection, Short Circuit Protection, Directly Connecting with PLC can Replace Small & Limit Switches.
SKU: 0961 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 13S 48V 50A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 13S 48V 50A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS Li-ion 13S 48V 50A BMS Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-010 -
Discrete Electronic Components, ICs, Logic Gates
74LS30 8-input NAND Gate IC
- Operating voltage range: +4.75 to +5.25V
- Recommended operating voltage: +5V
- Maximum supply voltage:7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Typical Rise Time: 18ns
- Typical Fall Time: 18ns
- Operating temperature:0°C to 70°C
- Storage Temperature: -65°C to 150°C
SKU: 0409 -
Automation Gadgets
Smart Home WiFi Switch 20A Boiler Water Heater On Off Timer Panel APP Remote Control Time Setting Touch Switch for Alexa EU 100-240V
Automation GadgetsSmart Home WiFi Switch 20A Boiler Water Heater On Off Timer Panel APP Remote Control Time Setting Touch Switch for Alexa EU 100-240V
- Operation Mode: ON-OFF
- Material: Glass + ABS plastic
- Current Rating: 20 Amps
- Operating Voltage: 100-240 Volts
- Connector Type: Wireless
- Interface Type: Touch
- Controller Type: IFTTT, Google Assistant, Amazon Alexa
- Connectivity Protocol: Wi-Fi
SKU: HA-024 -
3D Printers, CNC & 3D Printers, FDM 3D Printers
Creality Ender-5 Max FDM 3D Printer, 400x400x400mm Large Build Volume
3D Printers, CNC & 3D Printers, FDM 3D PrintersCreality Ender-5 Max FDM 3D Printer, 400x400x400mm Large Build Volume
- Pro-level Print Quality: Rigid all-metal frame and 64-point auto bed leveling
- Ultra Fast Printing: 700 mm/s industry-leading speed for a CoreXY printer
- Enormous Build Volume: 400 mm cubed size to print bigger or more
- Tailored for Print Farm: Multi-printer management via WLAN; tri-color indicator light
- Optional Enclosure: Higher ambient temperature for engineering filaments
SKU: TDP-076 -
3D Printers, CNC & 3D Printers, FDM 3D Printers
Elegoo Neptune 4 Pro FDM 3D Printer Dual-Gear Direct Extruder 225x225x265 Bed Size
3D Printers, CNC & 3D Printers, FDM 3D PrintersElegoo Neptune 4 Pro FDM 3D Printer Dual-Gear Direct Extruder 225x225x265 Bed Size
Elegoo Neptune 4 Pro FDM 3D Printer with 32-bit Silent Motherboard, Auto bed leveling, Dual-Gear Direct Extruder, 225x225x280 Larger Bed Volume 3D Printing Machine at best price online in Pakistan
SKU: TDP-028 -
3D Printer Parts, CNC & 3D Printers
LM10LUU Linear Ball Bearings 10mm Bore Long Size for CNC Machine 3D Printer
3D Printer Parts, CNC & 3D PrintersLM10LUU Linear Ball Bearings 10mm Bore Long Size for CNC Machine 3D Printer
- Model: LM10LUU
- Inner Diameter (mm): 10
- Outer Diameter (mm): 19
- Length (mm): 55
- Outer Casing: Chromium Steel
- Linear bearing ball cage, hardened coat of both ends ring.
- Safe and reliable operation
SKU: CNC-266 -
3D Printer Parts, CNC & 3D Printers
MK8/9 Dual Extruder Feed Device Part For 3D Printer 1.75mm Filament – 1( Right Side)
-6%
3D Printer Parts, CNC & 3D PrintersMK8/9 Dual Extruder Feed Device Part For 3D Printer 1.75mm Filament – 1( Right Side)
Buy online MK8/9 Dual Extruder Feed Device Part For 3D Printer 1.75mm Filament – 1( Right Side) in Pakistan. Electrobes has quality products for 3D printers & CNC machines, ABS, PLA.
SKU: CNC-068 -
Essential tools, Instruments & Tools
Screw Gauge – 0-25mm Outside Metric Micrometer
- A screw gauge is an instrument that is used to measure small lengths with accuracy greater than a Vernier Calliper.
- You may also check the Gauge of wire with the help of wire gauge chart (AWG or SWG) or conversion table from inches to milimeters
- 0 to 25mm range with readability to 0.01mm
- Plastic storage case
SKU: 1668 -
General Electronic Boards, Modules and Breakout Boards
15A 400W MOSFET Trigger Switch Driver Module
The board is of high power MOS trigger switch driver module and control board with field-effect tube to adjust the electronic switch. It adopts imported double MOS parallel active output to show lower internal resistance, greater electric current and power.
Besides it works at 15A,400W under common temperature which satisfies most devices usage and realizes the control of great power devices in a relaxed way.SKU: 0743 -
Discrete Electronic Components, ICs, Logic Gates
74LS06 HEX Inverter Buffer Driver with open Collector Gate IC
Discrete Electronic Components, ICs, Logic Gates74LS06 HEX Inverter Buffer Driver with open Collector Gate IC
- Supply voltage range: +4.75V to +5.25V
- Maximum supply voltage: +7V
- Maximum current allowed to draw through each gate output: 8mA
- Totally lead free
- TTL outputs
- MaximumRise Time: 15ns
- Maximum Fall Time: 15ns
- Operating temperature:0°C to 70 °C
SKU: 0404 -
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry Pis
Raspberry Pi 4 model B 8GB Computer Development Board
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry PisRaspberry Pi 4 model B 8GB Computer Development Board
Raspberry Pi 4 has the ability to interact with the outside world & has been used in digital maker projects. Buy Online Pi 4 with electrobes in Pakistan. Apart from that USB 3, dual HDMI, an upgraded CPU, and massive memory would provide much better performance to run applications.
SKU: 0746 -
Batteries Connectors, Connectors, Discrete Electronic Components
18650 2×1 Battery Cell Spacer Holder Mount
-20%
Batteries Connectors, Connectors, Discrete Electronic Components18650 2×1 Battery Cell Spacer Holder Mount
18650 2×1 Battery Cell Spacer/Holder a cylindrical battery spacer, made by flame retardant ABS+PC materials, with high-temperature resistance and crack resistance. There are slots on the edge of the holder, can be combined into many different sizes and shapes of the battery pack; after welding nickel tabs, the pack can pass vibration test without any other connecting device. Making your battery pack Solid and Reliable.
SKU: 1185 -
-
3D Printer Filaments, CNC & 3D Printers, EXYZ Filaments
JAMG HE PLA 1.75mm 3D Printer Filament – 200g
3D Printer Filaments, CNC & 3D Printers, EXYZ FilamentsJAMG HE PLA 1.75mm 3D Printer Filament – 200g
JAMG HE PLA Filament 1.75mm, Hi-Speed PLA 3D Printer Filament, Dimensional Accuracy 1.75mm, 200g Cardboard Spool 3D Printing Filament Fits for Most FDM 3D Printers. This High quality PLA Filament available at electrobes has weight of 200g.
SKU: PF-039 -
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
2S 3A 7.4V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards2S 3A 7.4V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection Charger Module
2S 3A Li-ion Lithium Battery 7.4V 8.4V 18650 Charger Protection Board Module is a small PCB mounted Li-ion Lithium Battery charger protection module.
SKU: 0731 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
BH1750 Digital Light Intensity Sensor Module
-30%
General Sensors, Modules and Breakout Boards, Sensors & TransducersBH1750 Digital Light Intensity Sensor Module
This is a BH1750 light intensity sensor breakout board with a 16 bit AD converter built-in which can directly output a digital signal, there is no need for complicated calculations. This sensor is available at electrobes online in Pakistan.
SKU: 0143 -
Hardware, Instruments & Tools
Helping Hand Third Hand Tool Soldering Iron Stand with Magnifying Glass and LED Light
Hardware, Instruments & ToolsHelping Hand Third Hand Tool Soldering Iron Stand with Magnifying Glass and LED Light
- Welding Magnifying Glass with LED Light 3.5X-12X lens Auxiliary Clip Loupe Desktop Magnifier Third Hand Soldering Repair Tool
- Features: support clamps can be adjusted.
- Application range: repair industry, inspection, industrial electronics, laboratory, medical treatment, identification of jade, coins, jewelry, jade ware, porcelain, bronze ware, stamps, antiques and many other fields.
SKU: 0930 -
Automation Gadgets
S811 Smart Tuya Wifi Lock Digital Password Biometric Fingerprint Card Smart Home Door Lock
-2%
Automation GadgetsS811 Smart Tuya Wifi Lock Digital Password Biometric Fingerprint Card Smart Home Door Lock
- 5 modes for unlocking
- No Wiring Required
- Easy Clip-on installation, for standard glass doors, no need to drill holes for installation
- Model S811
- Used for wooden and metallic doors upto 30-55mm thickness
SKU: HA-009 -
3D Printer Parts, CNC & 3D Printers
LMH8UU 8mm Flange Mounted Linear Bearing Motion Bushing Ball Bearing CNC 3D printer
3D Printer Parts, CNC & 3D PrintersLMH8UU 8mm Flange Mounted Linear Bearing Motion Bushing Ball Bearing CNC 3D printer
LMH linear bushing has oval shaped flange positioned at the beginning of bearing. Outer diameter of body is smaller compare to bush type LMEH. It also has double lip seals and resin ball cage. It can be used in linear motion application where fixing true holes in bushing flange is required.
SKU: CNC-171 -
DIP Transistors, Discrete Electronic Components, Transistors
TIP42C Bipolar PNP Transistor
Power Transistors are transistors which can handle a lot more power in compared to BJTs. Similar to BJTs, the current flow between the collector and the emitter of is controlled by the current flow through the base. TIP42C is a PNP type semiconductor Bipolar high power Transistor. Collector-base voltage of 40V and Collector current of 6A. This type of semi-conductors are available online in Pakistan at electrobes.
SKU: 0557 -
3D Printer Filaments, CNC & 3D Printers, EXYZ Filaments
EXYZ Matt PLA 1.75mm 3D Printer Filament 1kg/Roll
3D Printer Filaments, CNC & 3D Printers, EXYZ FilamentsEXYZ Matt PLA 1.75mm 3D Printer Filament 1kg/Roll
EXYZ Matt PLA Filament 1.75mm, Dimensional Accuracy 1.75mm, 1kg(2.2lbs) Cardboard Spool 3D Printing Filament Fits for Most FDM 3D Printers. This High quality PLA Filament available at electrobes has weight of 1Kg.
SKU: PF-022 -
Discrete Electronic Components, ICs, Logic Gates
74LS112 Dual JK Negative Edge Triggered Flip-Flop IC
Discrete Electronic Components, ICs, Logic Gates74LS112 Dual JK Negative Edge Triggered Flip-Flop IC
74LS76 comes with dual JK flip flops. JK flip flops are widely used in daily electronics devices by many methods but the basic operation of the JK flip flop is to store a bit. JK flip flop allows to store a bit and then allows it to use for further functions. in digital electronics circuits. JK flip flop is one of the popular flip flops due to its clock input, pre-set, and clear functionalities. The JK flip-flop changes its state under the clock pulse signal. The clock signal can be either a positive edge or a negative edge. The clock pulse gives multiple advantages to the flip flop. 74LS76 also has provided a feature to neglect or prevent invalid outputs.
SKU: 1523 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS LFP LifePo4 20S 60V 30A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS LFP LifePo4 20S 60V 30A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
DALY BMS 20S 60V LifePO4 PCB Protection Board with Balance Wire and Temperature Sensor for 20 3.2V Cells 60V LiFePO4 Lithium Battery Pack with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-036 -
CCTV and IP Cameras
Panoramic Wireless 360 Camera 3MP V380 Pro APP CCTV Smart Home with Two Ways Audio WIFI MINI Indoor Security Camera
CCTV and IP CamerasPanoramic Wireless 360 Camera 3MP V380 Pro APP CCTV Smart Home with Two Ways Audio WIFI MINI Indoor Security Camera
1. Remote viewing through the free App on your smart Phone
2. The alert will be pushed to your phone if any motion is detected
3. Amazing night vision, You could switch between B/W & color mode even in the night!
4. 360° Panoramic Camera, with the 1080P high resolution, we can enjoy the panoramic viewing no blind angle
5. Two Way Audio, talk back with people near the cameras whether you’re in the backyard or halfway around the world
SKU: CAM-012 -
Discrete Electronic Components, ICs, Logic Gates
74LS07 HEX Buffers/Drivers with Open-Collector Gate IC
Discrete Electronic Components, ICs, Logic Gates74LS07 HEX Buffers/Drivers with Open-Collector Gate IC
- Supply voltage range: +4.75V to +5.25V
- Maximum supply voltage: +7V
- Maximum current allowed to draw through each gate output: 8mA
- Totally lead free
- TTL outputs
- MaximumRise Time: 15ns
- Maximum Fall Time: 15ns
- Operating temperature:0°C to 70 °C
SKU: 0405 -
3D Printer Filaments, CNC & 3D Printers
3D Touch BLTouch V3.1 Auto Bed Leveling Sensor for 3D Printer
3D Printer Filaments, CNC & 3D Printers3D Touch BLTouch V3.1 Auto Bed Leveling Sensor for 3D Printer
3D print with the BLTouch sensor to reap the benefits of advanced auto-bed leveling. The BLTouch sensor is an innovative device that works with extreme precision to ensure that your print bed is as level as possible. Install the game-changing BLTouch v3.1 onto any print surface to produce high-quality 3D models!
Discover accuracy and a professional workflow with the BLTouch Auto-bed leveling sensor. This sensor is key to creating a great foundation for your 3D model. The BLTouch Sensor is delivered pre-crimped with spare connectors for an easy and smooth installation.
If you have a Creality 3D printer, the BLTouch sensor can also be used as an upgrade or spare part. Use the BLTouch auto-bed leveling kit for the following Creality 3D machines:
- Ender 3
- Ender 3 Pro
- Ender 5 (pro)
- CR-10
- CR-10 mini
SKU: CNC-200 -
3D Printer Filaments, CNC & 3D Printers
SUNLU PETG 1.75mm 1KG 3D Printer Filament
SUNLU PETG Filament is a material used by 3D printers that uses 1.75mm of filament, available at Electrobes in Pakistan. The SUNLU PETG filaments comes in various colors that we hold in our stock . This PETG Filament has weight of 1Kg/roll.
SKU: PF-033 -
Breakout Boards, Modules and Breakout Boards
W5500 SPI to Ethernet LAN Network Module
The Ethernet module for Arduino and compatible boards based on the Wiznet W5500 chip, faster than the previous W5100. It provides an easy way to connect your module to the local network and internet based WIZNET with a TCP/IP interface. Compatible with libraries with the same Ethernet API. A web server can be built with this shield. It can be used as a server or as a client.
SKU: 1538 -
Audio & Video Connector, Connectors, Discrete Electronic Components
3.5mm Audio Jack Female Connector Plug Socket
Audio & Video Connector, Connectors, Discrete Electronic Components3.5mm Audio Jack Female Connector Plug Socket
- Connector plug
- Connector type Jack 3.5mm
- Connector type male
- Spatial orientation straight
- Mechanical mounting for cable
- Electrical mounting soldering
- Contact plating nickel plated
SKU: 0690 -
Discrete Electronic Components, General Electronics
Titan TN-3010D 30V 10A Direct Current Regulated Laboratory Power Supply
Discrete Electronic Components, General ElectronicsTitan TN-3010D 30V 10A Direct Current Regulated Laboratory Power Supply
Titan 3010D Direct Current Variable Power Supply LED Display 0-30V Output
Main Function1.Output constant current adjustable
2.Output constant voltage adjustable
3.LED voltage and current display
4.Constant voltage and current operation in individual
5.Over current protection
6.Current and voltage regulation are smooth and not gears regulationSKU: 1670 -
Discrete Electronic Components, ICs, Op Amps
LM324 Quad OP-AMP IC
- Integrated with four Op-Amps in a single package
- Wide power supply Range
- Singe supply – 3V to 32V
- Dual supply – ±1.5V to ±16V
- Low Supply current – 700uA
- Single supply for four op-amp operation enables reliable operation
- Operating ambient temperature – 0˚C to 70˚C
- Soldering pin temperature – 260 ˚C (for 10 seconds – prescribed
SKU: 0435 -
-
Discrete Electronic Components, Light Dependent Resistors, Resistors
Large Size LDR Light Dependent Resistor
Discrete Electronic Components, Light Dependent Resistors, ResistorsLarge Size LDR Light Dependent Resistor
- Package: RADIAL 5mm
- Wave Length/Frequency: 650nm
- Product Type: Photo Conductive Cell
- Light resistance: 10-20K Ohm
- Dark resistance:1-20M ohm
- Max voltage: 150V
- Max power: 100mW
- Maximum Operating Temperature : +800C (Approx.)
SKU: Z-1461 -
Adapters, Batteries & Chargers
Imax B3 Pro Lipo Battery Balance Compact Charger 2S-3S Lithium Polymer Adapter
Adapters, Batteries & ChargersImax B3 Pro Lipo Battery Balance Compact Charger 2S-3S Lithium Polymer Adapter
A new design of easy compact balance charger for 2 and 3 cells LiPo battery fast charging with wide AC input.
An internal 100-240V AC switch power is built in, and the high precision balance circuit can supply larger current up to 850mA per cell. Double color LED can display the process of charging (RED: charging; GREEN: full).SKU: 0989 -
CCTV and IP Cameras
IMOU Bullet 2E IPC-F22P 3MP 1080P Bullet WiFi Outdoor Camera with Built-in Mic and Human Detection
CCTV and IP CamerasIMOU Bullet 2E IPC-F22P 3MP 1080P Bullet WiFi Outdoor Camera with Built-in Mic and Human Detection
IMOU IPC-F22P delivers 2MP live monitoring with a choice of 3.6mm lens option, it supports the latest H.265 compression which can save up to 50% bandwidth and storage. Human Detection allows you to monitor what matters without receiving annoying false alerts. With IP67 certified, the camera can be used outdoors under different weather conditions.
- IP67 Weatherproof
- PoE Support
- 1080P
- H.265
- Human Detection
- Night Vision
- Built-in Mic
- Cloud
SKU: CAM-010 -
Modules and Breakout Boards, STM Boards
STM32f4 STM32f407 Discovery Kit Arm Cortex-M4 Development Board
-32%
Modules and Breakout Boards, STM BoardsSTM32f4 STM32f407 Discovery Kit Arm Cortex-M4 Development Board
The STM32f4 STM32f407 Discovery Kit for STM32F407 kit powers the capabilities of the STM32f4 STM32f407 Discovery Kit high-performance microcontrollers, to allow users to easily develop applications featuring audio. It includes an ST-LINK embedded debug tool, one ST-MEMS digital accelerometer, a digital microphone, one audio DAC with the integrated class D speaker driver, LEDs, push-buttons and a USB OTG micro-AB connector.
SKU: 1324 -
-
-
Mechanical, Motors and Driver, Robotics & Machines, Stepper Motors & Drivers
IBT-2 43A H-bridge Double BTS7960 High Power Motor Driver Module
Mechanical, Motors and Driver, Robotics & Machines, Stepper Motors & DriversIBT-2 43A H-bridge Double BTS7960 High Power Motor Driver Module
The drive uses an H-bridge driver module that composed by Infineon power drive chip BTS7960, with overheating and over-current protection. Double BTS7960 H-bridge driver circuit, with strong drive and braking effect, use 74HC244 chip effectively isolate the microcontroller and the motor drive! High Current up to 43A!
SKU: 0740 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS LFP LifePo4 16S 48V 80A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS LFP LifePo4 16S 48V 80A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
DALY BMS 16S 48V LifePO4 PCB Protection Board with Balance Wire and Temperature Sensor for 16 3.2V Cells 48V LiFePO4 Lithium Battery Pack with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-029 -
Educational & DIYs
12V Cabinet Drawer Electric Solenoid Door Lock 54x28x39mm
To drive a solenoid lock with an Arduino you will need a relay module fairly good power supply, as a lot of current will rush into the solenoid to charge up the electro-magnet, about 1000mA, so don’t try to power it with a 9V battery!
SKU: SV-021 -
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry Pis
Raspberry Pi 5 Mini Computer Development Board – 4GB Ram
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry PisRaspberry Pi 5 Mini Computer Development Board – 4GB Ram
- Processor: Quad-core ARM Cortex-A76, capable of high performance for computing tasks.
- Memory: 8GB LPDDR4x RAM, ensuring smooth operation and the ability to handle complex workloads.
- Graphics: Dual 4K display output via micro-HDMI ports, supporting a rich visual experience.
- Connectivity:
- USB Ports: 2x USB 3.0 and 2x USB 2.0 ports for fast data transfer and peripheral connectivity.
- Networking: Gigabit Ethernet and dual-band 802.11ac Wi-Fi for robust and flexible network connections.
- Bluetooth: Bluetooth 5.0 for connecting to various devices and accessories.
- Storage: MicroSD card slot for easy and expandable storage options.
- Power: 5V USB-C power input, ensuring efficient power delivery and compatibility with a wide range of power supplies.
- GPIO: 40-pin GPIO header for interfacing with sensors, actuators, and other hardware.
SKU: 1867 -
Arduino Shield, Audio & Visual, Compatibles for Arduino, LCD & Display, Modules and Breakout Boards
1602 16×2 LCD Keypad Shield For Arduino
Arduino Shield, Audio & Visual, Compatibles for Arduino, LCD & Display, Modules and Breakout Boards1602 16×2 LCD Keypad Shield For Arduino
This is a very popular 16×2 LCD Keypad shield for Arduino or Freeduino board. It includes a 2×16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD. Analog Pin 0 is used to read the push buttons.
SKU: 0805 -
Robotics & Machines, Stepper Motors & Drivers
NEMA23 24V Stepper motor 1.8/step with GT2 Pulley – Used
-20%
Robotics & Machines, Stepper Motors & DriversNEMA23 24V Stepper motor 1.8/step with GT2 Pulley – Used
- Unipolar stepping motor (can be configured into bipolar)
- Long life
- More Accurate
- Step angle = 1.80deg/ phase
- Lead wire size AWG #22
- Number of leads = 6 cables
- S3M timing pulley diameter = 26mm
- Current Ratings: 1.8A/ 2A/ 2.2A/ 2.5A comes in different amperage
SKU: 0904 -
IOT Development Board, Modules and Breakout Boards
RC832 Receiver and TS832 Transmitter 32Ch 5.8G 600mW Wireless AV for FPV
IOT Development Board, Modules and Breakout BoardsRC832 Receiver and TS832 Transmitter 32Ch 5.8G 600mW Wireless AV for FPV
Buy online RC832 Receiver+TS832Transmitter 32Ch 5.8G 600MW Wireless AV for FPV in Pakistan. 600mW transmitter power assure 5KM distance in open area, 5-8 KM is available if work with the bigger gain antenna.
SKU: 1158 -
Converters, Modules and Breakout Boards
XL6009E1 1.3-35V 3A Auto Step Up/Down Buck/Boost DC-DC Converter
Converters, Modules and Breakout BoardsXL6009E1 1.3-35V 3A Auto Step Up/Down Buck/Boost DC-DC Converter
XL6009 module is a non-isolated step-up boost voltage converter featuring adjustable output voltage, high efficiency. It converts input voltage of 5-32V DC to an output voltage of 4-38V DC.
SKU: 1779 -
CCTV and IP Cameras
Fish Eye 360 Degree WIFI Camera 1080P Panoramic Wireless Smart Security
Full Glass Fisheye Lens F2.0 1.44mm, 1/3’’ CMOS Sensor, Full And Clear View. Easy To Access Via Mobile, PC, IPad etc. Multi-Platform Watch And Remote Control. Max 64G TF Card Storage, Also Support Cloud Storage, Video Does Not Account For Cell Phone Memory. Support Roof Mounted (360° Panoramic Coverage) and Wall Mounted (180° Panoramic Coverage) Two Installation Modes. Two-Way Voice Intercom, Microphone And Speaker Built-In, Smooth Communication.
SKU: CAM-009 -
-
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
7S 20A 24V Li-ion Lithium 18650 Battery BMS Packs PCB Protection Board With Matching Cable Automatic Protection Function
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards7S 20A 24V Li-ion Lithium 18650 Battery BMS Packs PCB Protection Board With Matching Cable Automatic Protection Function
suitable for parties: Widely used in computer, mobile phone and other digital products which can be easily damaged for a long time, and suitable for different types of parties.
voltage regulator: This is a new type of battery with multiple protection functions for the battery case, and the lcd display can be set up as an external power supply mode or lithium battery.
SKU: 1628 -
Discrete Electronic Components, Educational & DIYs, Tools & Accessories
Power Bank Module Single USB Output Type-B & Micro USB Ports
Discrete Electronic Components, Educational & DIYs, Tools & AccessoriesPower Bank Module Single USB Output Type-B & Micro USB Ports
DIY Power bank housing shell with night high intensity LED torch, single USB port, 4 Led backup status, Charge and discharge protection, Built-in lithium battery protection IC on the circuit board, over and under voltage protection and over current protection.
SKU: 1705 -
Compatibles for Arduino, Mainboards, Modules and Breakout Boards
LilyPad Arduino 328 Main Board (ATmega328P Processor)
Compatibles for Arduino, Mainboards, Modules and Breakout BoardsLilyPad Arduino 328 Main Board (ATmega328P Processor)
The LilyPad Arduino 328 Main Board is an Arduino-programmed microcontroller designed to be easily integrated into e-textiles and wearable projects. The LilyPad Arduino consists of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible.
SKU: 0647 -
Discrete Electronic Components, Potentiometer & Knobs, Resistors
10K Ohm 103 Multi turn Trimpot Potentiometer / Variable Resistor
Discrete Electronic Components, Potentiometer & Knobs, Resistors10K Ohm 103 Multi turn Trimpot Potentiometer / Variable Resistor
There are lots of trimpots out there. Some are very large, some so small they require a screwdriver. Here at Electrobes, we just needed a simple one that worked. This 10K trimmable potentiometer has a small knob built right in and it’s breadboard friendly to boot! Perfect for your next LCD contrast adjuster, opamp setting, or volume level. This is 3296W model 103 within the datasheet.
SKU: 079 -
3D Printers, CNC & 3D Printers
Anycubic Kobra 3 Max Combo 3D Printer, Multi-Color 3D Printer 4 Colors High Speed 3D Printer
3D Printers, CNC & 3D PrintersAnycubic Kobra 3 Max Combo 3D Printer, Multi-Color 3D Printer 4 Colors High Speed 3D Printer
● The Largest Consumer-Grade Multicolor 3D Printer
● 420*420*500mm Print Volume
● Latest ACE PRO Flawless 8-Color Printing
● Precise Auto-Leveling & Anti-Step Lost
● Filament Box with Drying Capability
● 600mm/s High-Speed Printing
● Anycubic Slicer Next & Anycubic App UpgradeSKU: TDP-071 -
Discrete Electronic Components, General ICs, ICs
28BYJ-48 5V DC Mini Stepper Motor with ULN2003 DIP IC Stepper Motor Driver Module
Discrete Electronic Components, General ICs, ICs28BYJ-48 5V DC Mini Stepper Motor with ULN2003 DIP IC Stepper Motor Driver Module
This 5V DC 28BYJ-48 Stepper Motor is small, inexpensive and high-quality geared step motor. The 28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver is a widely popular combination of the stepper motor and stepper driver, because of the stability and reliability of the system.
SKU: 0969 -
Breadboards, Protoboards & PCBs, Discrete Electronic Components
12 x 6 inch Double Sided Copper Clad FR4 Fiber Glass Printed Circuit Board PCB Sheet
Breadboards, Protoboards & PCBs, Discrete Electronic Components12 x 6 inch Double Sided Copper Clad FR4 Fiber Glass Printed Circuit Board PCB Sheet
12 x 4.5 inch Copper Clad FR4 Fiber Glass Printed Circuit Board PCB Board with Copper Thickness 2oz, Total PCB thickness 16mm & Tolerance 10% Single Sided. This board is Ink resistant. Suitable etchants Ferric Chloride or Fine Etch crystals. Buy online in Pakistan at Electrobes.
SKU: 0925-4 -
Discrete Electronic Components, Resistors, Surface Mount Resistors
1K Ohm 102 0603 SMD Resistor Network Array
Discrete Electronic Components, Resistors, Surface Mount Resistors1K Ohm 102 0603 SMD Resistor Network Array
Specification Value Resistance Value 1KOhm Power Rating 1/8W Power Rating per Resistor 1/16W Number of Resistors 2 Family 742 Type Array Circuit Designator ISOL Number of Terminals 4 Technology Thick Film Temperature Coefficient 200ppm/°C Terminal Pitch 0.8mm Termination Style Concave Tolerance 5% Minimum Operating Temperature -55°C Maximum Operating Temperature 125°C Mounting Surface Mount Packaging Tape and Reel Case Size 0606 Case Size per Element 0603 Case Style Molded Package/Case 0606(2 X 0603) Product Depth 1.6mm Product Height 0.6mm Product Length 1.6mm SKU: 0295 -
DIP Transistors, Discrete Electronic Components, Transistors
TIP32C Bipolar PNP Transistor 100V 3A TO-220
-11%
DIP Transistors, Discrete Electronic Components, TransistorsTIP32C Bipolar PNP Transistor 100V 3A TO-220
The TIP32C is a standard PNP bipolar junction transistor that is often used for medium power applications. A bipolar junction transistor (BJT) is a three terminal device that is allows for amplification or switching applications. BJTs consists of three differently doped semiconductor regions, the collector region, the base region, and the emitter region. To buy online in Pakistan visit electrobes-com-827299.hostingersite.com
SKU: 0240 -
3D Printer Filaments, CNC & 3D Printers
PLA 1.75mm Diameter 3D Printer Filament 250g Roll
1.75mm black/White PLA Filament is strong and tough with a semi-glossy finish. It is made from high-quality biodegradable PLA (polylactic acid) plastic and may be used indoors, thanks to its eco-friendly design.
This 0.25Kg (0.55 lb) spool of filament may be used with most 3D printers that accept 1.75mm PLA filament and do not use heated bed plates.
SKU: PF-101 -
Discrete Electronic Components, ICs, Power Optimizer & Circuit Protection
0.5A 6V TO-252 SMD Voltage Regulator 78M06
Discrete Electronic Components, ICs, Power Optimizer & Circuit Protection0.5A 6V TO-252 SMD Voltage Regulator 78M06
Voltage regulators are very common in electronic circuits. They provide a constant output voltage for a varied input voltage. In our case the 78M06 IC is an iconic regulator IC that finds its application in most of the projects to regulate variable voltages to a fixed 6V output. This IC is the TO-252 case of 7806 IC to be used on SMD circuits.
SKU: 0884 -
Motor and Gears, Robotics & Machines
JGB37-550 DC 12V 680RPM High Torque Metal Gear DC Motor
DC 12V 680 RPM High Speed Large Torque Motor has stable and reliable performance. It is very easy to disassemble, clean and maintain. Highlighted feature of this module is excellent quality and long service life. It is micro, compact and light weight. This motor is high-speed and high-power, and is generally powered by a lithium battery. This DC motor can save electricity to a great extend. Environmental protection is the another inevitable feature of this DC motor. The sound at DC 12V is relatively loud, because the motor itself has a fan, coupled with high speed, the motor’s own no-load current is 1.25 A, so the noise is reasonable, but the torque of this motor is very strong. At the same speed, its torque should be more than twice that of the ordinary 555 geared motor.
SKU: 1198 -
3D Printer Parts, CNC & 3D Printers, CNC Machine Parts
0.3mm to 3.0mm Tungsten Drill Bit Set
- Micro PCB drill bits, used to create tiny holes needed for a PCB
- Made from tungsten steel with high hardness and wear resistance, not bend or break easily
- Micro drill bits can prevent resistance, smooth to drill holes
- Sharp cutting edge can reduce cutting force and improve drilling quality
- Strictly symmetrical cutting edge, ensuring high efficient drilling and avoids deviation
- Applied to PCB, SMT, mold, hardware processing, electronic industry, etc.
SKU: CNC-159 -
Crystal Oscillators, Discrete Electronic Components
16Mhz Crystal Oscillator
Crystal Oscillator is an Electronics Oscillator circuit which uses the mechanical resonance of a vibrating crystal of piezoelectric material to generate an electrical signal with an accurate frequency. It also has automatic amplitude control and frequency drift is also very low due to change in temperature. Crystal Oscillators are only suitable for high-frequency application.
SKU: 0527 -
Discrete Electronic Components, LED Strips, LEDs & Lights
10 Meters 220V AC Warm White Color Digital LED Strip Rope Lights
Discrete Electronic Components, LED Strips, LEDs & Lights10 Meters 220V AC Warm White Color Digital LED Strip Rope Lights
- Environmental friendly: Low carbon, no radiation, no flicker, and no pollution to human and environment.
- Safe and stable.
- Cuttable along the cutting marks, according to practical requirement.
- Low power consumption, with 50,000+ hours long life span.
- 120-degree wide angle illumination, smooth and even light spread.
SKU: 1304 -
DIP Transistors, Discrete Electronic Components, Transistors
BT139 600E Triac Switching Transistor
- Direct triggering from low power drivers and logic ICs
- High blocking voltage capability
- Planar passivated for voltage ruggedness and reliability
- Sensitive gate
- Triggering in all four quadrants
SKU: 0237 -
Batteries & Chargers, Rechargeable
3.7V 1500mAh Rechargeable 18650 Li-Ion Battery Cell – New
We are providing this 1500mAh Li-Ion Rechargeable Li-ion 18650 Cell at the best price in the market for our customers These are powerful cells with higher number of life cycles and charging capacity compared to other cells available online in Pakistan. These batteries are available in different power rating at electrobes. We also have battery packs of 1s-14s lithium ion battery storage.
SKU: 0941 -
Robotics & Machines, Stepper Motors & Drivers
Nema17 12-24V High Torque Stepper motor 1.8/step 4 Wire (New)
Robotics & Machines, Stepper Motors & DriversNema17 12-24V High Torque Stepper motor 1.8/step 4 Wire (New)
NEMA17 6 Wire Bipolar Stepper Motor NEMA17 Stepper Motor NEMA 17 Stepper Motors very useful in the various application especially which demands low speed with high precision Many machines such as 3D Printers CNC Router and Mills Camera Platforms XYZ Plotters etc Nema17 6 wire Bipolar Stepper.
SKU: CNC-202 -
Consumer Electronics, Educational & DIYs, Tools & Accessories
Spring Park Portable 7×18650 Battery Charger Case Holder
Consumer Electronics, Educational & DIYs, Tools & AccessoriesSpring Park Portable 7×18650 Battery Charger Case Holder
DIY Power bank housing shell with battery indication, 2 USB Output ports, 1 type-C and 1 type-B Charging ports, discharge protection, Built-in lithium battery protection IC on the circuit board, over and under voltage protection and over current protection.
SKU: 1773 -
-
Breadboards, Protoboards & PCBs, Discrete Electronic Components
8cm x 12cm Single Sided FR4 Fiber Glass Dotted Veroboard
Breadboards, Protoboards & PCBs, Discrete Electronic Components8cm x 12cm Single Sided FR4 Fiber Glass Dotted Veroboard
8 x 12cm Single Sided FR4 Fiber Glass Dotted Veroboard Printed Circuit Board PCB Board with Copper Thickness 2oz, Total PCB thickness 16mm & Tolerance 10% Single Sided. This board is Ink resistant. Suitable etchants Ferric Chloride or Fine Etch crystals. Buy online in Pakistan at Electrobes.
SKU: 1540
