[vc_row][vc_column]
- Audio & Visual, LCD & Display
1.3 Inch 128×64 IIC I2C OLED Blue Display Module For Arduino
This OLED display module is small, only 1.3″ inch diagonal, it is made of 128×64 individual blue OLED pixels, each one is turn on or off by the controller chip. It has white backlight and can work without backlight, OLED display is higher compared to that of LCD display, you will like the miniature for its crispness. This module uses I2C to communicate with microcontroller such as Arduino.
SKU: 0955 - Batteries & Chargers, Accessories
1865O Battery Holder Double Li-ion V8 Battery Shield Micro USB Type C USB Charging Ports
Batteries & Chargers, Accessories1865O Battery Holder Double Li-ion V8 Battery Shield Micro USB Type C USB Charging Ports
- This module is a portable mobile power supply that supports 3V / 1A and 5V / 3A two voltage outputs
- This mobile power supply has a built-in lithium battery protection IC, which has overcurrent, overvoltage, under-voltage, etc.
- 4 level LED lights show power, the default boot is always in working state, you need to manually shut down (if necessary, change to non-working state automatic shutdown mode, just cut off the middle line of the “NC” bit or remove the “ROUT” resistor)
- LED indicator(Green means full, Red means charging)
Note:
5V voltage output rated current is 2.2A, maximum support 3A current (not recommended for overload, easy to damage the module, speed up the service life)
SKU: 1834 - Discrete Electronic Components, General Electronics
Micro USB OTG to USB 2.0 Adapter for Smartphones & Tablets
Discrete Electronic Components, General ElectronicsMicro USB OTG to USB 2.0 Adapter for Smartphones & Tablets
Small size, easy to plug-and-play, Compatible with Android devices with micro USB port. Widely applied for U disk, mouse, keyboard, USB fan, camera, game console, MP3 player, etc. with USB 2.0 port. Make your life more convenient and comfortable.
SKU: 1571 - Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 6S 24V 100A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 6S 24V 100A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS Li-ion 6S 24V 100A BMS Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-007 - Audio & Visual, Computer Interface
Samsung 64GB MicroSDHC Memory Card Class 10
This Samsung EVO+ 64GB microSDHC Memory Card Class 10 is ideal for use with multimedia mobile phones or any other device that uses microSDHC cards. Expand your entertainment storage with up to 64GB of extra music, videos, photos, games, software, and more. It can be used with Raspberry Pi and Arduino SD card module available online in Pakistan at electrobes.
SKU: SD-001 - CCTV and IP Cameras
V380 360 Degree 1080P Full HD Cam with WiFi Connection Security Camera
1. Remote viewing through the free App on your smart Phone
2. The alert will be pushed to your phone if any motion is detected
3. Amazing night vision, You could switch between B/W & color mode even in the night!
4. 360°Pan/Tilt Camera, with the 1080P high resolution, we can enjoy the panoramic viewing no blind angle
5. Two Way Audio, talk back with people near the cameras whether you’re in the backyard or halfway around the world
SKU: CAM-014 - 3D Printer Parts, CNC & 3D Printers
Metal Improved Extruder Feed Kit MK8 for Creality Ender 3 Ender 5 CR-10S – Right
3D Printer Parts, CNC & 3D PrintersMetal Improved Extruder Feed Kit MK8 for Creality Ender 3 Ender 5 CR-10S – Right
- High Quality Aluminum Alloy, Oxide Sandblasting Surface
- Adjustable Extrusion Force for Different Filaments
- Print Soft Filaments
- No Slippage or Wire Grinding
- Easy Installation
- Compatible Models: Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/CR-10/CR-10S
SKU: CNC-144 - Hardware, Instruments & Tools
MECHANIC HK-560 Electric High Quality Soldering Iron Constant Temperature 60W Welding Pen
Hardware, Instruments & ToolsMECHANIC HK-560 Electric High Quality Soldering Iron Constant Temperature 60W Welding Pen
Buy MECHANIC HK-560 60W Soldering Iron at Pakistan’s Best Online Shopping Store at cheap price. A one-stop shop for wide variety of high quality soldering irons, soldering rework station and tools. We Deliver in Peshawar, Karachi, Lahore, Islamabad, Rawalpindi, Multan, Quetta, Faisalabad and all over Pakistan.
SKU: 1768 - Accessories, Adapters, Batteries & Chargers
9V 1000mA / 1 Amp 9W SMPS Power Adapter
- Stabilized Output, low ripple & low interference
- Ideal for CCTV Cameras / Routers / Modems / Cordless Phones / Set Top Boxes / Wireless Devices / POS Machines etc.
- Plug Type – 2 Pin or 3 Pin as per availability
- 5.5mm DC Pin
SKU: 0780 - Compatibles for Arduino, Mainboards, Modules and Breakout Boards
Transparent Acrylic Case Shell For Arduino Mega R3
Compatibles for Arduino, Mainboards, Modules and Breakout BoardsTransparent Acrylic Case Shell For Arduino Mega R3
This MEGA 2560 acrylic enclosure fits the Arduino Mega 2560 and compatible boards. The enclosure helps to protect the board while still providing access to the connectors and reset button.
It comes with the 3mm thick acrylic pieces and the hardware required to assemble the case and to mount the Arduino Mega 2560 or compatible board inside the case. It does not come with the Mega 2560.
SKU: 0799 - CCTV and IP Cameras
IMOU 2MP Full Colour Night Vision Pan-Tilt Camera
1. Remote viewing through the free App on your smart Phone
2. The alert will be pushed to your phone if any motion is detected
3. Amazing night vision, You could switch between B/W & color mode even in the night!
4. 360°Pan/Tilt Camera, with the 1080P high resolution, we can enjoy the panoramic viewing no blind angle
5. Two Way Audio, talk back with people near the cameras whether you’re in the backyard or halfway around the world
SKU: CAM-015 - Automation Gadgets
S802 Max Smart Door Lock with Doorbell HD Snap Camera RFID, Pin, Key and Biometric Verification System
Automation GadgetsS802 Max Smart Door Lock with Doorbell HD Snap Camera RFID, Pin, Key and Biometric Verification System
- With HD camera that features high quality image when the door bell button is pressed
- 5 methods to open the lock
- No Wiring Required
- Model S802 Max
- Used for doors upto 38-55mm Thickness
- Elegant handle design with tempered glass
- Heavy duty lock
SKU: HA-012 - Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry Pis
Raspberry Pi 4 Case, Raspberry Pi 4 Fan ABS Case With Cooling Fan – Red and White
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry PisRaspberry Pi 4 Case, Raspberry Pi 4 Fan ABS Case With Cooling Fan – Red and White
- Newest ABS case for Raspberry Pi 4 Model B.
- Full access to all Raspberry Pi 4 ports, such as GPIO port, Micro HDMI port, USB port, SD CARD slot.
- Support install the cooling fan on the cover , don’t worry the mainboard be over heat.
- Sliding design cover , make it more convenient to use.
- ABS material is stronger and light , won’t block the WiFi and bluetooth.
SKU: 1167 - 3D Printer Parts, CNC & 3D Printers, CNC Machine Parts, Robotics & Machines, Stepper Motors & Drivers
NEMA23 Stepper motor 1.8/step with GT2 Pulley – Used
-20%
3D Printer Parts, CNC & 3D Printers, CNC Machine Parts, Robotics & Machines, Stepper Motors & DriversNEMA23 Stepper motor 1.8/step with GT2 Pulley – Used
a. Unipolar stepping motor (can be configured into bipolar – see picture below)
b. Long life
c. More Accurate
d. Step angle = 1.80 deg/ phase
e. Lead wire size AWG #22
f. Number of leads = 6 cablesSKU: 0898 - Essential tools, Instruments & Tools
KADA 903D 3 in 1 multi-function Hot Air Soldering Rework Station + Soldering Iron + Power Supply
Essential tools, Instruments & ToolsKADA 903D 3 in 1 multi-function Hot Air Soldering Rework Station + Soldering Iron + Power Supply
Original KADA 903D 3 in 1 multi-function Hot Air Soldering Rework Station + Soldering Iron + DC Power Supply an all in one soldering tool suitable for de-soldering and soldering of various components, such as: SOIC CHIP QFP PLCC BGA SMD components.
SKU: 1317 - Modules and Breakout Boards, Relay Boards
Timer Relay 6 To 30V Adjustable Delay Timer
This is a timer relay suitable for your incubator and other time-related projects. Timer relay is a Digital display Led Home Automation Delay Timer Control Switch Module Timer Controller, Operating voltage: 6-30V, support micro USB 5.0V power supply, Can control the device within DC 30V 5A or AC 220V 5A; It can be applied to many fields; wide range of application.
SKU: 1410 - Compatibles for Arduino, Mainboards, Modules and Breakout Boards
Arduino MEGA 2560 PRO Mini Compatible With ATMEGA2560-16AU And CH340G
Compatibles for Arduino, Mainboards, Modules and Breakout BoardsArduino MEGA 2560 PRO Mini Compatible With ATMEGA2560-16AU And CH340G
This board is the compact microcontroller fully compatible to the ever-popular Arduino Mega 2560.
It features a genuine Atmel ATmega2560 running at 16Mhz and leverages a CH340G for UART/USB interface to a micro USB.
Equipped with 54 (fifty-four) Digital I/O and 16 (sixteen) Analogue I/O it provides plenty of interfacing options.
SKU: 1122 - 3D Printer Parts, CNC & 3D Printers, CNC Machine Parts
2040 V-Slot Aluminum Profile Extrusion for 3D Printer & CNC Machine
3D Printer Parts, CNC & 3D Printers, CNC Machine Parts2040 V-Slot Aluminum Profile Extrusion for 3D Printer & CNC Machine
- Black surface treatment, beautiful and durable.
- V slot aluminium profile can work as same as T slot aluminium profile, all T slot accessories (such as T nuts) can fit V slot aluminium profile.
- V slot aluminium profile support linear motion, you can build such as 3d printer and so on.
- V slot aluminium profile extrusions are perfect for custom machine frames, workstations, prototyping, guarding and many more purposes.
SKU: CNC-131 - Discrete Electronic Components, General Electronics, Resistors, Surface Mount Resistors
0.5R 100W Resistor Aluminum Wire Wound Golden
Discrete Electronic Components, General Electronics, Resistors, Surface Mount Resistors0.5R 100W Resistor Aluminum Wire Wound Golden
Buy online 0.5R 100W Resistor Aluminum Wire Wound Golden in Pakistan. Good heat dissipation, suitable for heat sink installation High insulation available at Electrobes.
SKU: 1512 - Instruments & Tools, Meters
Digital Mini Thermometer Temperature Meter Display with Probe
- Digital mini lcd thermometer
- Temperature range: -50~ 110°c, temperature measurement accuracy:±1°c
- Sensor cable length: 1 meter
- Batteries: Lr44 coin cell (easily available) (battery included in this product)
SKU: 1429 - 3D Printer Parts, CNC & 3D Printers
3D printer track Bearing pulley BX24 accessories Open builds
Features:
1. This item is well made of premium material for durable and practical use.
2. With high quality and precise design, it will ensure its popularity and practicability among users.
3. Perfect accessory for your 3D printer.
SKU: CNC-169 - 3D Printers, CNC & 3D Printers, DLP/SLA/Resin 3D Printer
ANYCUBIC Photon Mono M5s Pro 14K Resin 3D Printer
3D Printers, CNC & 3D Printers, DLP/SLA/Resin 3D PrinterANYCUBIC Photon Mono M5s Pro 14K Resin 3D Printer
ANYCUBIC Photon Mono M5s Pro Resin 3D Printer 14K HD Mono Chrome LCD 3x High Speed Printing Auto leveling Intelligent Detection Large Printing Volume resin SLA 3d printer available in Pakistan
SKU: TDP-036 - Planes And Copters, Robotics & Machines
Quadcopter Drone A2212 2450KV Brushless DC Motor BLDC
This is a brushless outrunner 2450kv motor specifically made for quadcopters and multirotors. 2450 kv motors are perfect for medium size quadcopters F450 F550 SK340 frame with 8 inch to 10 inch propellers.
SKU: 0972 - Batteries & Chargers, Rechargeable
3.2V 6000mAh Rechargeable Li-Ion IFR32700 5C Battery Cell – New
We are providing this 6000mAh Lithium Phosphate LifePo4 Rechargeable 32700 Cell at the best price in the market for our customers. These are powerful cells with higher number of life cycles and charging capacity compared to other cells available online in Pakistan.
SKU: 1821 - 3D Printers, CNC & 3D Printers, FDM 3D Printers
Elegoo Neptune 3 Plus FDM 3D Printer Dual-Gear Direct Extruder 320x320x400mm Larger Bed Size
-20%
3D Printers, CNC & 3D Printers, FDM 3D PrintersElegoo Neptune 3 Plus FDM 3D Printer Dual-Gear Direct Extruder 320x320x400mm Larger Bed Size
Elegoo Neptune 3 Plus FDM 3D Printer with 32-bit Silent Motherboard, Auto bed leveling, Dual-Gear Direct Extruder, 320x320x400 Larger Bed Volume 3D Printing Machine at best price online in Pakistan
SKU: TDP-005 - Discrete Electronic Components, General ICs, ICs
74LS37 7437 Quad 2-Input SN7437 NAND IC
- Logic IC Type: NAND GATE
- Load Capacitance (CL): 45.0 pF
- Operating Temperature-Min: 0.0 Cel
- Operating Temperature-Max: 70.0 Cel
- Power Supplies (V): 5
- Power Supply Current-Max (ICC): 54.0 mA
- Propagation Delay (tpd): 15.0 ns
- Schmitt Trigger: NO
- Supply Voltage-Nom (Vsup): 5
- Supply Voltage-Min (Vsup): 4.75 V
- Supply Voltage-Max (Vsup): 5.25 V
SKU: 0541 - Buttons, Switches & Pads, Connectivity, Touch Switch
1 Channel Capacitive Touch Module – TTP223
A capacitive touch sensor module based on the dedicated TTP223 touch sensor IC. The module provides a single integrated touch sensing area of 11 x 10.5mm with a sensor range of ~5mm. An on-board LED will give a visual indication of when the sensor is triggered.
SKU: 0643 - Discrete Electronic Components, Light Dependent Resistors, Resistors
LDR Light Dependent Resistor 5mm
Discrete Electronic Components, Light Dependent Resistors, ResistorsLDR Light Dependent Resistor 5mm
- Package: RADIAL 5mm
- Wave Length/Frequency: 650nm
- Product Type: Photo Conductive Cell
- Light resistance: 10-20K Ohm
- Dark resistance:1-20M ohm
- Max voltage: 150V
- Max power: 100mW
- Maximum Operating Temperature : +800C (Approx.)
SKU: 0217 - 3D Printer Parts, CNC & 3D Printers
Short Distance Bowden V6 Metal Hotend Extruder 1.75mm with Cooling Fan for 3D Printer
3D Printer Parts, CNC & 3D PrintersShort Distance Bowden V6 Metal Hotend Extruder 1.75mm with Cooling Fan for 3D Printer
- Model: J-Head Hot End V6
- Design: Short-Distance
- Improved processing of flexible filament
- More compact design
- Easier maintenance
- Reduced heating
- Improved temperature control and cooling
- Material: aluminum
- Nozzle: 0.4 mm
- Filament: 1.75 mm
- 12V 40W heating cartridge
- NTC thermistor 100k
- Cable length: approx. 90 cm
SKU: CNC-069 - Essential tools, Instruments & Tools
Lt-86C Magnifying Glass Desk Lamp 5x Magnification lamp with Large Glass 120mm Diameter
Essential tools, Instruments & ToolsLt-86C Magnifying Glass Desk Lamp 5x Magnification lamp with Large Glass 120mm Diameter
- Fully adjustable arm: this convenient design measures 17.7in.x18in., the durable, slender pole pivotes easily in any direction, bringing light exactly where you need it
- Super bright reading and task lamp: designed for aging eyes, this professional-quality LED magnifying lamp has a 5 in. Dia lens that is made of standard green glass
- High-quality SMD LEDs: this lamp has 30 energy-saving SMD LEDs that are guaranteed to last, the low voltage saves your money on electricity and like most LEDs these SMDs give off almost no heat
- Powerful 5 in. lens: the powerful lens magnifies objects 1.75 times or 2.25 times or 3 times (for options), bringing focus and clarity to reading and watching in lab or cleanroom
SKU: 1315 - IOT Development Board, Modules and Breakout Boards
RC832 Receiver and TS832 Transmitter 32Ch 5.8G 600mW Wireless AV for FPV
IOT Development Board, Modules and Breakout BoardsRC832 Receiver and TS832 Transmitter 32Ch 5.8G 600mW Wireless AV for FPV
Buy online RC832 Receiver+TS832Transmitter 32Ch 5.8G 600MW Wireless AV for FPV in Pakistan. 600mW transmitter power assure 5KM distance in open area, 5-8 KM is available if work with the bigger gain antenna.
SKU: 1158 - 3D Printer Parts, CNC & 3D Printers
10mm x 15mm Chain Cable Cover Drag Wire Carrier for 3D Printers & CNC Machines
-4%
3D Printer Parts, CNC & 3D Printers10mm x 15mm Chain Cable Cover Drag Wire Carrier for 3D Printers & CNC Machines
Buy online 10mm x 15mm Chain Cable Cover Drag Wire Carrier for CNC Machine And 3D Printer in Pakistan. Available in 300mm, 500mm, 800mm, 1000mm, 1200mm chain sizes. Electrobes has various accessories for 3D printers and CNC machines.
SKU: CNC-218 - 3D Printer Filaments, CNC & 3D Printers
ESUN e-PLA Matte 1.75mm 3D Printer Filament 1kg/Roll
eSUN e-PLA Matte Filament 1.75mm, 3D Printer PLA Plus Filament, Dimensional Accuracy 1.75mm, 1kg(2.2lbs) Cardboard Spool 3D Printing Filament Fits for Most FDM 3D Printers. This High quality PLA+ Filament available at electrobes has weight of 1Kg.
SKU: PF-038 - EV Parts, Mechanical, Motors and Driver
DC48-60V High Power Brushless Motor 1300W DC Brushless Motor No Hall High Torque BLDC Motor
EV Parts, Mechanical, Motors and DriverDC48-60V High Power Brushless Motor 1300W DC Brushless Motor No Hall High Torque BLDC Motor
800-1300W high-power brushless motor voltage: 48-60V Hall free brushless motor, which can be driven by an electric vehicle dual mode controller sold on Taobao. It can also be used as a high-power generator.
SKU: 1755 - CNC & 3D Printers, CNC Machines
TwoTrees TTC 3018S CNC Cutting Engraving Machine DIY Kit
- Controlling Software: Candle
- Material Quality: Bakelite + profile
- Engraving Range: 300*180*40mm
- Machine Size: 420*355*280mm
- Lead screw: T8 screw
- Power Supply: 24V (110V-240V)
- Package Size: 440*250*180mm
- Standard: A complete set of spare parts machines and installation tools.
- Features coupling, double nuts for tolerance, no connecting parts
SKU: CNC-310 - 3D Printer Filaments, CNC & 3D Printers
3D Touch BLTouch V3.1 Auto Bed Leveling Sensor for 3D Printer
3D Printer Filaments, CNC & 3D Printers3D Touch BLTouch V3.1 Auto Bed Leveling Sensor for 3D Printer
3D print with the BLTouch sensor to reap the benefits of advanced auto-bed leveling. The BLTouch sensor is an innovative device that works with extreme precision to ensure that your print bed is as level as possible. Install the game-changing BLTouch v3.1 onto any print surface to produce high-quality 3D models!
Discover accuracy and a professional workflow with the BLTouch Auto-bed leveling sensor. This sensor is key to creating a great foundation for your 3D model. The BLTouch Sensor is delivered pre-crimped with spare connectors for an easy and smooth installation.
If you have a Creality 3D printer, the BLTouch sensor can also be used as an upgrade or spare part. Use the BLTouch auto-bed leveling kit for the following Creality 3D machines:
- Ender 3
- Ender 3 Pro
- Ender 5 (pro)
- CR-10
- CR-10 mini
SKU: CNC-200 - General Sensors, Modules and Breakout Boards, Sensors & Transducers
5v Laser Receiver Module High Level Laser Light Detected Sensor Module For Arduino
General Sensors, Modules and Breakout Boards, Sensors & Transducers5v Laser Receiver Module High Level Laser Light Detected Sensor Module For Arduino
Laser Receiver Sensor Module, Output high level when receive laser signal, Output low level when not receive laser signal. Buy online in Pakistan. Working at 5V.
SKU: 0136 - Converters, Modules and Breakout Boards
5V to 3.3V DC-DC Step down Converter Module Board AMS1117 3V3
Converters, Modules and Breakout Boards5V to 3.3V DC-DC Step down Converter Module Board AMS1117 3V3
Buy online 5V to 3.3V DC-DC Step down Converter Module Board AMS1117 3V3 in Pakistan. This AMS1117 3.3V Power Supply Module is great for your microcontroller projects and for various electronic prototypes. This is a high-performance module which provides a quick solution for powering your circuit.
SKU: 0745 - Modules and Breakout Boards, Wireless Communication
SIM900A BOARD 1800/1900 MHZ GSM GPRS MODULE (Non-PTA Approved)
Modules and Breakout Boards, Wireless CommunicationSIM900A BOARD 1800/1900 MHZ GSM GPRS MODULE (Non-PTA Approved)
SIM900A is an ultra-compact and reliable wireless module. It is a Dual-band GSM/GPRS module in a SMT type and is great for wireless cost-effective solutions.
Featuring an industry-standard interface, the SIM900A delivers GSM/GPRS 900/1800MHz performance for voice, SMS, and GPRS in a small form factor and with low power consumption. With a tiny configuration of 24mm x 24mm x 3 mm, SIM900A can fit almost all the space requirements in your applications, especially for slim and compact demand of design.
SKU: 0891 - Buttons, Switches & Pads, Connectivity, Push Buttons
5x5x1.5mm Momentary Tactile PCB SMD Mount 4P Push Button
Buttons, Switches & Pads, Connectivity, Push Buttons5x5x1.5mm Momentary Tactile PCB SMD Mount 4P Push Button
- Product Name: Tact Switch
- Type: SPST
- Action Type: Momentary
- Pin Number: 4
- Dimension: 5x5x1.5mm/0.2×0.2×0.06 inch
- Button Diameter: 2mm/0.08inch
- Material: Plastic, Metal, Electric Parts
- Color:Black, Yellow, Silver Tone
- Net Weight: 6g
SKU: 0477 - Discrete Electronic Components, Potentiometer & Knobs, Resistors
100K Ohm Rotary Potentiometer / Variable Resistor
Discrete Electronic Components, Potentiometer & Knobs, Resistors100K Ohm Rotary Potentiometer / Variable Resistor
- Linear Taper Rotary Type Potentiometer
- Model: B1M
- PCB Mounted
- Breadboard Friendly
- Resistance Value: 1M ohm
- Power: 1/2W
- Adjustment Type: Top Adjustment
- Type: Single Linear (Type B)
- Features: Knurled Shaft
- Shaft Diameter: 6mm / 0.23″
- Shaft Length: 13mm / 0.51″
- Mounting Hole: 7.5mm / 0.29″
- Base Height: 7mm / 0.27″
- Base Diameter: 16mm / 0.62″
- Material: Metal w Electronic Parts
- Color: As Shown In Picture
- Weight: 5g
SKU: 0204 - Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 13S 48V 100A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 13S 48V 100A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS Li-ion 13S 48V 100A BMS Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-012 - Modules and Breakout Boards, Voltage, Current & Power
2in1 DC 0-100V Voltmeter Ammeter With DC 100A 75mV Ampere Shunt Dual 0.28″ Red Blue Voltage Detector Current Indicator
Modules and Breakout Boards, Voltage, Current & Power2in1 DC 0-100V Voltmeter Ammeter With DC 100A 75mV Ampere Shunt Dual 0.28″ Red Blue Voltage Detector Current Indicator
0.28” digital voltage ampere meter voltmeter ammeter DC 0-100V 100A red and blue dual LED display voltage amperage current meter 2 in 1 tester with 100A/75mV shunt resistor
SKU: 1713 - Discrete Electronic Components, General ICs, ICs
LM339 VOLTAGE COMPARATOR IC
- Operating voltage range: +4.75 to +5.25V
- Recommended operating voltage: +5V
- Maximum supply voltage:7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Typical Rise Time: 18ns
- Typical Fall Time: 18ns
- Operating temperature:0°C to 70°C
- Storage Temperature: -65°C to 150°C
SKU: 0422 - Converters, Modules and Breakout Boards
PWM DC Motor Speed Controller Switch DC 20A Current Voltage Regulator 10-60V PWM High Power Drive Module 60A 12V 24V 36V 48V
-19%
Converters, Modules and Breakout BoardsPWM DC Motor Speed Controller Switch DC 20A Current Voltage Regulator 10-60V PWM High Power Drive Module 60A 12V 24V 36V 48V
This is a simple and easy-to-use 20A High Power DC motor speed controller of small size, elegant appearance and stable performance. It is made with high quality circuit board which ensures a longer service life. Buy online in Pakistan
SKU: 1577 - Robotics & Machines, Stepper Motors & Drivers
Nema17 12-24V High Torque Stepper motor 1.8/step 4 Wire (New)
Robotics & Machines, Stepper Motors & DriversNema17 12-24V High Torque Stepper motor 1.8/step 4 Wire (New)
NEMA17 6 Wire Bipolar Stepper Motor NEMA17 Stepper Motor NEMA 17 Stepper Motors very useful in the various application especially which demands low speed with high precision Many machines such as 3D Printers CNC Router and Mills Camera Platforms XYZ Plotters etc Nema17 6 wire Bipolar Stepper.
SKU: CNC-202 - Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 13S 48V 80A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 13S 48V 80A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS Li-ion 13S 48V 80A BMS Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-011 - Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 20S 72V 60A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 20S 72V 60A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS 20S 72V Lithium Li Ion Battery Pack BMS With Balance And Waterproof 30A 40A 50A 60A Used For 72V E-bike Scooter PCB PCM Board Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-019 - Crystal Oscillators, Discrete Electronic Components
16Mhz Crystal Oscillator
Crystal Oscillator is an Electronics Oscillator circuit which uses the mechanical resonance of a vibrating crystal of piezoelectric material to generate an electrical signal with an accurate frequency. It also has automatic amplitude control and frequency drift is also very low due to change in temperature. Crystal Oscillators are only suitable for high-frequency application.
SKU: 0527 - Buttons, Switches & Pads, Connectivity, Touch Switch
TTP229 16 Key 4×4 16 Channel Digital Capacitive Touch Keypad
-29%
Buttons, Switches & Pads, Connectivity, Touch SwitchTTP229 16 Key 4×4 16 Channel Digital Capacitive Touch Keypad
This 16 key capacitive touch keypad is based on the TTP229 capacitive sensor with accurate sensing of up to 16 points. Using this keypad provides a solid state alternative to mechnical type keypads providing the advantage of greater durability especially in dusty environments.
SKU: 0644 - Audio & Visual, LCD & Display
7 Inch 800*480 TJC Capacitive Touch HMI Serial Interface Display For Arduino and Raspberry Pi
-13%
Audio & Visual, LCD & Display7 Inch 800*480 TJC Capacitive Touch HMI Serial Interface Display For Arduino and Raspberry Pi
The 7″ TJC HMI LCD Touch Display is a Seamless Human Machine Interface (HMI) display module solution that provides a control and visualization interface for any Raspberry Pi and Arduino kits.
SKU: 1320 - Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
4S 20A 14.8V Cell 18650 Li-ion Lithium Battery Balanced Charging BMS PCB Board with Protection
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards4S 20A 14.8V Cell 18650 Li-ion Lithium Battery Balanced Charging BMS PCB Board with Protection
Battery Protection Board 4S 20A 14.8V BMS for 18650 Lithium Ion Cell HX-4S-A20. prevent it from being over-discharged / over-charged during use. Buy in Pakistan
SKU: 1615 - Modules and Breakout Boards, Raspberry Pi Boards, Raspberry Pis
Raspberry Pi 4 model B 2GB Computer Development Board
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry PisRaspberry Pi 4 model B 2GB Computer Development Board
Raspberry Pi 4 has the ability to interact with the outside world & has been used in digital maker projects. Apart from that USB 3, dual HDMI, an upgraded CPU, camera and SD card slot and massive memory would provide much better performance to run applications.
SKU: 0747 - Audio & Visual, LCD & Display
16×2 LCD Display 1602 Character Display for Arduino – Blue
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Each character is build by a 5×8 pixel box
- Can work on both 8-bit and 4-bit mode
- It can also display any custom generated characters
- Backlight Color: Blue
SKU: 0804 - Modules and Breakout Boards, Voltage, Current & Power
CN3791 MPPT Solar Charge Controller Board 11.1V to 12.6V 2A 3 Cell Lithium Battery Charging Module with 12V 2 Pin JST Connector
Modules and Breakout Boards, Voltage, Current & PowerCN3791 MPPT Solar Charge Controller Board 11.1V to 12.6V 2A 3 Cell Lithium Battery Charging Module with 12V 2 Pin JST Connector
ESP32-CAM-MB Programming Adapter Board WIFI + Bluetooth compatible Backplane TTL Downloader Module 4.7V-5.3V for ESP32-CAM Module Shield in Pakistan
SKU: 1836 - Buttons, Switches & Pads, Connectivity, Limit Switch
Limit Switch Small
Microswitch is suitable for using in each kind of control circuit with the rated voltage less than 250V and rated current less than 5A (DC and AC effective value) for controlling elements. It is the sense switch with the certain movement strength through the certain traveling to cause the electronic contact speed.
SKU: 0531 - Consumer Electronics, EV Parts
48V/60V/72V Digital Odometer Power Meter Speedo Meter Instrument for Electric Tricycle Motorcycle Scooter
-22%
Consumer Electronics, EV Parts48V/60V/72V Digital Odometer Power Meter Speedo Meter Instrument for Electric Tricycle Motorcycle Scooter
Digital Odometer Power Meter Speedo Meter Instrument for Electric Tricycle, Motorcycle, Scooter, E-kart, Electric rikshaw and electric bicycle etc. We have all items required for electric scooter in stock. You can also get other related components like BLDC motor, speed controller and switches at electrobes-com-827299.hostingersite.com at cheaper price in Pakistan.
SKU: EB-32 - Robotics & Machines, Servos & Controllers
Tower Pro MG996R Metal Gear Micro Servo Motor 180 Degree
MG996R Metal Gear Micro Servo Motor with a maximum torque of 11 kg/cm rotates from 0 to 360 degree based on the duty cycle of the PWM. Buy online in Pakistan. Also available in 360 degree rotation.
SKU: 1613 - 3D Printer Parts, CNC & 3D Printers, CNC Machine Parts
3D Printer Hotbed Leveling Spring Nickel Plating 5x10x25mm
3D Printer Parts, CNC & 3D Printers, CNC Machine Parts3D Printer Hotbed Leveling Spring Nickel Plating 5x10x25mm
3D Printer Parts Bed Leveling Toughened Spring For Heated bed Leveling strong spring of yellow color, 5mm Bore, 10mm Outer dia. and 25mm Length. Buy at best price online in Pakistan
SKU: CNC-252 - Development Boards, Modules and Breakout Boards, STM Boards
ST-LINK V2 (CN) – STM8 / STM32 Programmer & Debugging Emulator
Development Boards, Modules and Breakout Boards, STM BoardsST-LINK V2 (CN) – STM8 / STM32 Programmer & Debugging Emulator
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
SKU: 1408 - Hardware, Instruments & Tools
JAKEMY JM-8117 37 in 1 Multifunctional mini Professional kit precision Repair tool Household Electronics DIY Screwdriver tools
Hardware, Instruments & ToolsJAKEMY JM-8117 37 in 1 Multifunctional mini Professional kit precision Repair tool Household Electronics DIY Screwdriver tools
Original JAKEMY JM-8117 37 in 1 Multifunctional mini Professional kit precision Repair tool Household Electronics DIY Screwdriver tools set in Pakistan
SKU: 1113 - Adapters, Batteries & Chargers
12V 30A 360W Switching Power Supply Driver
12V power supplies (or 12VDC power supplies) are one of the most common power supplies in use today. In general, a 12VDC output is obtained from a 110VAC or 220VAC input using a combination of transformers, diodes and transistors.
SKU: CNC-194 - General Electronic Boards, Modules and Breakout Boards
LM386 Audio Amplifier Module
The LM386 Audio Amplifier Module is a basic signal amplifier with 200X Gain, designed to accept incoming audio signals and boost them while maintaining the correct sound levels and ratios. It is a low-voltage Electronic Module with a small form factor that can read incoming signals from audio devices like radios, guitar pickups and microphones to amplify them for audio output devices like speakers, headphones or additional digital modules. It features an internal gain of 20x to keep the external parts count as low as possible, and an onboard potentiometer for manual on-the-fly volume adjustments.
SKU: 0763 - Batteries & Chargers, Rechargeable
3.7V 1800mAh Rechargeable 18650 Li-Ion Battery Cell – New
We are providing this 1800mAh Li-Ion Rechargeable Li-ion 18650 Cell at the best price in the market for our customers. These are powerful cells with higher number of life cycles and charging capacity compared to other cells available online in Pakistan.
SKU: 1803 - Consumer Electronics
180 Degree AC 85-265V Motion Detector Outdoor Wall Surface Mounting Motion Sensor
Consumer Electronics180 Degree AC 85-265V Motion Detector Outdoor Wall Surface Mounting Motion Sensor
This is a 220V AC human infrared sensors, pyroelectric infrared technology, the use of industrial district-level chip, intelligent control, set energy saving, convenient and environmentally friendly one, very convenient. This module also comes in 12V DC variant.
SKU: 1802 - Discrete Electronic Components, ICs, Logic Gates
74LS26 Quad 2-Input Buffer NAND High Voltage Gate IC
Discrete Electronic Components, ICs, Logic Gates74LS26 Quad 2-Input Buffer NAND High Voltage Gate IC
- Operating voltage range: +4.75 to +5.25V
- Recommended operating voltage: +5V
- Maximum supply voltage:7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Typical Rise Time: 18ns
- Typical Fall Time: 18ns
- Operating temperature:0°C to 70°C
- Storage Temperature: -65°C to 150°C
SKU: 0408 - Batteries & Chargers, Rechargeable
Universal Single Slot Li-ion Battery Charger for 18650 Cells 3.7v Rechargeable Lithium Ion Batteries
Batteries & Chargers, RechargeableUniversal Single Slot Li-ion Battery Charger for 18650 Cells 3.7v Rechargeable Lithium Ion Batteries
- Home/Travel Wall AC Multifunctional/Universal Battery Charger
- Automatically stops when charging is complete.
- Red / Orange light when charging, full of turns green, auto stop charging.
- Designed to charge your batteries quickly and safely.
- Wide range charging Voltage
SKU: 0938 - Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 20S 72V 30A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 20S 72V 30A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS 20S 72V Lithium Li Ion Battery Pack BMS With Balance And Waterproof 30A 40A 50A 60A Used For 72V E-bike Scooter PCB PCM Board Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-017 - Audio & Visual, LCD & Display
12864 128X64 KS0108 Dots Graphic LCD Display Module (Blue Color Backlight)
Audio & Visual, LCD & Display12864 128X64 KS0108 Dots Graphic LCD Display Module (Blue Color Backlight)
The 12864B Graphic LCD module is a 128×64 pixel LCD display with a blue backlight and white foreground. The display is fully programmable and can display a combination of both graphics and text. It can operate in both parallel and serial (SPI) modes which can be configured by the external pin PSB. In SPI mode only 3 data pins are required to drive this display.
SKU: 0957 - Accelerometer, Gyroscope & Navigation, Modules and Breakout Boards, Sensors & Transducers
MPU6050 GY-521 6DOF 3 Axis Analog Gyro Sensor + 3 Axis Accelerometer Module
Accelerometer, Gyroscope & Navigation, Modules and Breakout Boards, Sensors & TransducersMPU6050 GY-521 6DOF 3 Axis Analog Gyro Sensor + 3 Axis Accelerometer Module
MPU-6050 Module consists of 3 axis accelerometer and 3 axis Gyrometer. MPU-6050 is used to measure motion-related parameters like velocity, acceleration, displacement, orientation, etc.
SKU: 0813 - Robotics & Machines, Stepper Motors & Drivers
DRV8825 Stepper Motor Driver Soldered Pins with Heat Sink
-27%
Robotics & Machines, Stepper Motors & DriversDRV8825 Stepper Motor Driver Soldered Pins with Heat Sink
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 micro stepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of the A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
SKU: 0752 - Planes And Copters, Robotics & Machines
Flysky FS-GT3B 2.4GHz RC Remote Control 3CH Radio Model Transmitter & Receiver For Quadcopter – Black
Planes And Copters, Robotics & MachinesFlysky FS-GT3B 2.4GHz RC Remote Control 3CH Radio Model Transmitter & Receiver For Quadcopter – Black
FS GT-3B 2.4Ghz 3Ch Tx & Rx
GT-2B 2.4ghz 3 channel system is an entry level transmitter offering the reliability of 2.4Ghz signal technology with very sensitive 3ch long antenna receiver for RC Car or Boat.SKU: RC-008 - Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
JK Smart BMS LFP Li-ion 8S-24S 100A BMS Battery Management System for Li-ion Lifepo4 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsJK Smart BMS LFP Li-ion 8S-24S 100A BMS Battery Management System for Li-ion Lifepo4 Battery Pack Balanced Charging Board
JKBMS is a leading brand in power battery management systems (BMS), dedicated to advancing “active balancing technology for lithium batteries.”
- Active Balancing: Optimizes battery performance and lifespan.
- Wireless Communication: Allows real-time monitoring and control.
- Functional Safety: Ensures safety and reliability across applications.
- Capacity Management: Boosts battery efficiency and utilization.
SKU: BMS-044 - Modules and Breakout Boards, Wireless Communication
MiFare 13.56MHz Classic Blank RFID Card
Could be modified many times. Lightweight and portable to carry. Convenient to use. Replacement card of your old one. UID cards have 16 Sectors and 4 Blocks each Sector. Organized in 16 sector with 4 blocks of 16 bytes each(one block include 16 bytes) Just program this UID to the UID of lost card then you have a new Exactly the same card.
SKU: 0822 - Essential tools, Instruments & Tools
JAKEMY JM-T1-11 Professional Long Pointed Tip Tweezers
Jakemy JM-T1-11 professional extra strength tweezers the head section adopts a special processing process, which can maintain good work performance It is widely used in electronic care, chemical industry, assembly, beauty, gardening, etc.
SKU: 1351 - Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS LFP LifePo4 4S 12V 50A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS LFP LifePo4 4S 12V 50A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
DALY BMS 4S 12V LifePO4 PCB Protection Board with Balance Wire and Temperature Sensor for 4 3.2V Cells 12V LiFePO4 Lithium Battery Pack with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-039 - Discrete Electronic Components, General ICs, ICs
74LS14 7414 Hex Schmitt Trigger Inverter Logic IC
Applications
- The IC can be used for Noise Removing.
- It has wide use in Power meter and Power analyzers.
You can download this Datasheet for 74LS14 Hex Inverter Schmitt Trigger from the link given below:
SKU: 1581
