[vc_row][vc_column]
-
Crystal Oscillators, Discrete Electronic Components
12Mhz Crystal Oscillator
- 18pF of Load Capacitance
- Frequency Tolerance(Ƹf/f) range is ± 30ppm
- Frequency Temperature Stability range is ±50ppm
- Resonance Resistance 40ohms (max)
- Oscillation mode: Fundamental mode
- Shunt Capacitance less than 7pF
- Drive Level less than 100µW
- Operating Temperature Range: -20 to + 70°C
- Operable Temperature Range: -25 to + 85°C
- Storage Temperature Range: -55 to + 125°C
- Insulation Resistance: 500 M ohms
SKU: 0525 -
Breakout Boards, Modules and Breakout Boards, Robotics & Machines, Stepper Motors & Drivers
1.5A H-bridge Dual Channel DC Motor Driver Module L298N PWM Speed Control
Breakout Boards, Modules and Breakout Boards, Robotics & Machines, Stepper Motors & Drivers1.5A H-bridge Dual Channel DC Motor Driver Module L298N PWM Speed Control
1.5A H-bridge Dual Channel DC Motor Driver Module L298N PWM Speed Control. Use of imported original chip, built-in low on-resistance MOS switch, minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered.
SKU: 0953 -
-
-
Modules and Breakout Boards, STM Boards
STM32f4 STM32f407 Discovery Kit Arm Cortex-M4 Development Board
-32%
Modules and Breakout Boards, STM BoardsSTM32f4 STM32f407 Discovery Kit Arm Cortex-M4 Development Board
The STM32f4 STM32f407 Discovery Kit for STM32F407 kit powers the capabilities of the STM32f4 STM32f407 Discovery Kit high-performance microcontrollers, to allow users to easily develop applications featuring audio. It includes an ST-LINK embedded debug tool, one ST-MEMS digital accelerometer, a digital microphone, one audio DAC with the integrated class D speaker driver, LEDs, push-buttons and a USB OTG micro-AB connector.
SKU: 1324 -
Modules and Breakout Boards, Wireless Communication
MiFare 13.56MHz Classic Blank RFID Card
Could be modified many times. Lightweight and portable to carry. Convenient to use. Replacement card of your old one. UID cards have 16 Sectors and 4 Blocks each Sector. Organized in 16 sector with 4 blocks of 16 bytes each(one block include 16 bytes) Just program this UID to the UID of lost card then you have a new Exactly the same card.
SKU: 0822 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 16S 60V 60A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 16S 60V 60A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS 16S 60V Lithium Li Ion Battery Pack BMS With Balance And Waterproof 20A 30A 40A 60A Used For 60V E-bike Scooter PCB PCM Board Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-016 -
Modules and Breakout Boards, Relay Boards
1 Channel Wireless Smart Remote Control Relay Switch 12V DC 10A 433MHZ Transmitter And Receiver Set
Modules and Breakout Boards, Relay Boards1 Channel Wireless Smart Remote Control Relay Switch 12V DC 10A 433MHZ Transmitter And Receiver Set
1 Channel Remote Control Switch 12V DC 10A 433MHZ Transmitter And Receiver Set in Pakistan. Three output modes for the choice. Safe and flexible to operate and install.
SKU: 0798 -
Discrete Electronic Components, Modules and Breakout Boards, Sensors & Transducers, Temperature Sensor, Tools & Accessories
UNI-T UT300H Non Contact Digital Infrared Thermometer Temperature Meter
-33%
Discrete Electronic Components, Modules and Breakout Boards, Sensors & Transducers, Temperature Sensor, Tools & AccessoriesUNI-T UT300H Non Contact Digital Infrared Thermometer Temperature Meter
- Highest accuracy: +/- 0.3’C/0.6’F
- Best measurement distance: 5-10cm
- Display resolution: 0.1’C/0.1’F
- Repeatability: 0.3’C/0.6’F
- High temperature alarm threshold: 37.2’C
- Working environment: 15’C ~ 30’C (59’F ~ 86’F), <85% RH
- Transportation and storage environment: -20’C ~ 60’C (-4’F ~ 140’F), <85% RH
SKU: 1438 -
3D Printer Filaments, CNC & 3D Printers
3D Touch BLTouch V3.1 Auto Bed Leveling Sensor for 3D Printer
3D Printer Filaments, CNC & 3D Printers3D Touch BLTouch V3.1 Auto Bed Leveling Sensor for 3D Printer
3D print with the BLTouch sensor to reap the benefits of advanced auto-bed leveling. The BLTouch sensor is an innovative device that works with extreme precision to ensure that your print bed is as level as possible. Install the game-changing BLTouch v3.1 onto any print surface to produce high-quality 3D models!
Discover accuracy and a professional workflow with the BLTouch Auto-bed leveling sensor. This sensor is key to creating a great foundation for your 3D model. The BLTouch Sensor is delivered pre-crimped with spare connectors for an easy and smooth installation.
If you have a Creality 3D printer, the BLTouch sensor can also be used as an upgrade or spare part. Use the BLTouch auto-bed leveling kit for the following Creality 3D machines:
- Ender 3
- Ender 3 Pro
- Ender 5 (pro)
- CR-10
- CR-10 mini
SKU: CNC-200 -
Motor and Gears, Robotics & Machines
12V 740 RPM High Torque High Speed DC Gear Motor
GB37R-395 geared motor has a small reduction ratio of only 1:10 and an output speed of 740 rpm. It is not easy to make a speed reducer with such a small reduction ratio. Their gear motors quality and accuracy is very good, and the sound is quiet during operation.
SKU: 1765 -
Audio & Video Connector, Connectors, Discrete Electronic Components
3.5mm Audio Jack Female Connector Plug Socket
Audio & Video Connector, Connectors, Discrete Electronic Components3.5mm Audio Jack Female Connector Plug Socket
- Connector plug
- Connector type Jack 3.5mm
- Connector type male
- Spatial orientation straight
- Mechanical mounting for cable
- Electrical mounting soldering
- Contact plating nickel plated
SKU: 0690 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 7S 24V 100A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 7S 24V 100A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS Li-ion 7S 24V 100A BMS Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-020 -
EV Parts
36V 48V 1000W 30A DC Brush Motor Controller Electric Bike Controller Speed Controller for Brushed Motor Electric Bicycle Parts E-bike Controller
EV Parts36V 48V 1000W 30A DC Brush Motor Controller Electric Bike Controller Speed Controller for Brushed Motor Electric Bicycle Parts E-bike Controller
Electric Scooter Controller 36V 48V 1000W 30A DC Brush Motor Controller Electric Bike Controller Speed Controller for Brushed Motor Electric Bicycle Parts E-bike Controller EV Accessories Parts. The battery type can be Lithium battery, Lead Acid battery etc.
SKU: 1753 -
Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & Power
ACS712 30A 30 Amp Current Sensor Module
Modules and Breakout Boards, Sensors & Transducers, Voltage, Current & PowerACS712 30A 30 Amp Current Sensor Module
The ACS712 Module uses the famous ACS712 IC to measure current using the Hall Effect principle. The module gets its name from the IC (ACS712) used in the module, so for you final products use the IC directly instead of the module.
SKU: 0757 -
Breadboards, Protoboards & PCBs, Discrete Electronic Components
12×12 inch Double Sided Copper Clad FR4 Fiber Glass Printed Circuit Board PCB Sheet
Breadboards, Protoboards & PCBs, Discrete Electronic Components12×12 inch Double Sided Copper Clad FR4 Fiber Glass Printed Circuit Board PCB Sheet
12″ x 12″ 1 sqft Copper Clad FR4 Fiber Glass Printed Circuit Board PCB Board with Copper Thickness 2oz, Total PCB thickness 16mm & Tolerance 10% Single Sided. This board is Ink resistant. Suitable etchants Ferric Chloride or Fine Etch crystals. Buy online in Pakistan at Electrobes.
SKU: 0924-1 -
3D Printers, CNC & 3D Printers, FDM 3D Printers
Official CREALITY K1 Max Fastest FDM 3D Printer with 600mm/s Max. Speed 300x300x300mm Printing Volume
3D Printers, CNC & 3D Printers, FDM 3D PrintersOfficial CREALITY K1 Max Fastest FDM 3D Printer with 600mm/s Max. Speed 300x300x300mm Printing Volume
Creality K1 Max 3D Printers, 600mm/s Max Speed 20000mm/s² Acceleration 32mm³/s Max Flow Hotend Hands-Free Auto Leveling Dual Cooling and 300mm printing volume is available at electrobes at the best price online in Pakistan
SKU: TDP-012 -
Development Boards, Modules and Breakout Boards, STM Boards
ST-LINK V2 (CN) – STM8 / STM32 Programmer & Debugging Emulator
Development Boards, Modules and Breakout Boards, STM BoardsST-LINK V2 (CN) – STM8 / STM32 Programmer & Debugging Emulator
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
SKU: 1408 -
3D Printer Parts, CNC & 3D Printers, CNC Machine Parts
MR15 15mm linear rail guide length 300mm for CNC machines
3D Printer Parts, CNC & 3D Printers, CNC Machine PartsMR15 15mm linear rail guide length 300mm for CNC machines
- Model: mgn15, Length: 300mm.
- Slide is attached and can slide smoothly. Mini Petite, convenient to put in and out.
- Application to CNC parts, 3d printer parts, semiconductor manufacturing equipment, printed circuit boards, IC assembly equipment, medical equipment, robot arms, and other small linear motion machines, linear motion measurement equipment.
SKU: CNC-147 -
CNC & 3D Printers, CNC Machines
LASER TREE 40W Laser F23 Module 450nm TTL Laser Head Blue Light Module
CNC & 3D Printers, CNC MachinesLASER TREE 40W Laser F23 Module 450nm TTL Laser Head Blue Light Module
LASER TREE 40W(5W Output Optical Power) Laser Engraving Module, 450nm Laser Head for CNC Laser Engraver/Laser Cutter Machine, DIY Laser Engraving Tool Suitable for Wood Metal Acrylic Paper Etc.
SKU: CNC-277 -
Discrete Electronic Components, General ICs, ICs
74LS95 4-BIT SHIFT REGISTER / PARALLEL IN AND SERIAL OUT
Discrete Electronic Components, General ICs, ICs74LS95 4-BIT SHIFT REGISTER / PARALLEL IN AND SERIAL OUT
- Product Category: Counter Shift Registers
- Counting Sequence: Serial/Parallel to Parallel
- Number of Circuits: 1
- Number of Bits: 4 bit
- Package/Case: PDIP-14
- Logic Family: LS
- Logic Type: Bipolar
- Number of Input Lines: 5
- Propagation Delay Time: 32 ns
- Supply Voltage – Max: 5.25 V
- Minimum Operating Temperature: 0 °C
- Maximum Operating Temperature: + 70 °C
- Function: Shift Register
- Series: SN74LS95B
- Mounting Style: DIP
- Number of Output Lines: 4
- Product Type: Counter Shift Registers
- Subcategory: Logic ICs
- Unit Weight: 1 g
SKU: 0564 -
Consumer Electronics, Educational & DIYs, Tools & Accessories
PBC159 Power Bank Housing with BMS, Digital Display, LED Torch, Battery Capacity Indication for 6x 18650 Batteries
Consumer Electronics, Educational & DIYs, Tools & AccessoriesPBC159 Power Bank Housing with BMS, Digital Display, LED Torch, Battery Capacity Indication for 6x 18650 Batteries
DIY Power bank housing shell with Digital LCD display PCB and night high intensity LED torch compartment for six cell to achieve more capacity, ever wonder to make your own high quality power bank instead purchasing from market low level fake capacities power bank, we have this power bank housing with intelligent PCB to charge battery with buck converter and boost converter to recharge your mobile phone with 2 USB ports and Digital LCD display backup status.
SKU: 1435 -
Accelerometer, Gyroscope & Navigation, Modules and Breakout Boards, Sensors & Transducers
Gy-87 10dof IMU MPU6050 HMC5883L BMP180 Module for Arduino
Accelerometer, Gyroscope & Navigation, Modules and Breakout Boards, Sensors & TransducersGy-87 10dof IMU MPU6050 HMC5883L BMP180 Module for Arduino
MPU9250 GY-9250 9-AXIS 10DOF Accelerometer, Gyroscope, Compass Magnetic Field Sensor Module provides 9-axis Motion Tracking device. Buy online in Pakistan
SKU: 1407 -
Discrete Electronic Components, General Electronic Boards, Light Dependent Resistors, Modules and Breakout Boards, Resistors
Photosensitive Resistor LDR Light Sensor Module with Digital + Analog Output
Discrete Electronic Components, General Electronic Boards, Light Dependent Resistors, Modules and Breakout Boards, ResistorsPhotosensitive Resistor LDR Light Sensor Module with Digital + Analog Output
Features :
- It comes with Mounting Hole Screw.
- Easy to install
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
- Output: DO digital switch output (0 and 1), AO analog voltage output Compatible with Arduino, Raspberry, and other microcontroller board.
SKU: 1127 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS LFP LifePo4 24S 72V 20A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS LFP LifePo4 24S 72V 20A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
DALY BMS 24S 72V LifePO4 PCB Protection Board with Balance Wire and Temperature Sensor for 24 3.2V Cells 72V LiFePO4 Lithium Battery Pack with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-037 -
-
Adapters, Batteries & Chargers
12V 5A 60W Switching Power Supply Driver
12V power supplies (or 12VDC power supplies) are one of the most common power supplies in use today. In general, a 12VDC output is obtained from a 110VAC or 220VAC input using a combination of transformers, diodes and transistors.
SKU: CNC-184 -
Buttons, Switches & Pads, Connectivity, Power Switches
KCD4 Rocker Switch DPDT 2-State
- 20A 125VAC / 16A 250VAC (UL,CUL)
- 6A 125VL, 3/4HP 250VAC(UL, CUL)
- 16(4) A 250VAC~T125 (VDE,ENEC, CQC)
- Initial contact resistance : 20m ohm max.
- Insulation resistance : 100M ohm min, at 500VDC
- Dielectric strength : 1,000VAC (UL), 3000 VAC(VDE) for 1 minute
- Electrical Life: 6000 (UL); 10000 (VDE) cycles
SKU: 0500 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS LFP LifePo4 20S 60V 20A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS LFP LifePo4 20S 60V 20A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
DALY BMS 20S 60V LifePO4 PCB Protection Board with Balance Wire and Temperature Sensor for 20 3.2V Cells 60V LiFePO4 Lithium Battery Pack with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-035 -
Discrete Electronic Components, ICs, Logic Gates
74LS10 Tripple 3 input NAND Gate IC
- Operating voltage range: +4.75 to +5.25V
- Recommended operating voltage: +5V
- Maximum supply voltage:7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Typical Rise Time: 18ns
- Typical Fall Time: 18ns
- Operating temperature:0°C to 70°C
- Storage Temperature: -65°C to 150°C
SKU: 0407 -
3D Printer Parts, CNC & 3D Printers
310mm*310mm Double Sided PEI Spring Steel Sheet With Magnetic Base
-10%
3D Printer Parts, CNC & 3D Printers310mm*310mm Double Sided PEI Spring Steel Sheet With Magnetic Base
310mm Double Sided PEI Sticker Heatbed Hot Bed Removal Spring Steel Sheet Pre-applied PEI Flex Magnetic Base for 3D Printer ender 3 upgraded heat bed sheet. We have other 3d printer related products in our stock to shop at best price in Pakistan.
SKU: CNC-154 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
RCWL-0516 Doppler Radar Microwave Sensor Module Human Induction Detector Switch
General Sensors, Modules and Breakout Boards, Sensors & TransducersRCWL-0516 Doppler Radar Microwave Sensor Module Human Induction Detector Switch
This mini doppler radar sensor module is equipped with supporting DC 4-28V wide voltage This is a mini radar motion sensor module is equipped with RCWL-9196 chip based on the doppler microwave induction technology. It will automatically comtinuously output the high level TTL signel when there is motion. 360 degree no blind angle detection and maximum 7m sensoring distance with adjustable delay time and sensitivity. It is perfect for DIY microwave motion sensor light switch, human sensor toys, smart security devices, etc.
SKU: 0761 -
3D Printer Parts, CNC & 3D Printers, CNC Machine Parts, Robotics & Machines, Stepper Motors & Drivers
NEMA23 Stepper motor 1.8/step with GT2 Pulley – Used
-20%
3D Printer Parts, CNC & 3D Printers, CNC Machine Parts, Robotics & Machines, Stepper Motors & DriversNEMA23 Stepper motor 1.8/step with GT2 Pulley – Used
a. Unipolar stepping motor (can be configured into bipolar – see picture below)
b. Long life
c. More Accurate
d. Step angle = 1.80 deg/ phase
e. Lead wire size AWG #22
f. Number of leads = 6 cablesSKU: 0898 -
CNC & 3D Printers, CNC Machines
TwoTrees TTC 3018S CNC Cutting Engraving Machine DIY Kit
- Controlling Software: Candle
- Material Quality: Bakelite + profile
- Engraving Range: 300*180*40mm
- Machine Size: 420*355*280mm
- Lead screw: T8 screw
- Power Supply: 24V (110V-240V)
- Package Size: 440*250*180mm
- Standard: A complete set of spare parts machines and installation tools.
- Features coupling, double nuts for tolerance, no connecting parts
SKU: CNC-310 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 16S 60V 30A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 16S 60V 30A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS 16S 60V Lithium Li Ion Battery Pack BMS With Balance And Waterproof 20A 30A 40A 50A 60A Used For 60V Ebike Scooter PCB PCM Board Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-014 -
-
Discrete Electronic Components, General ICs, ICs
3 to 8 line Decoder / Demultiplexer 74HC138
• Logic Type: decoder / demultiplexer
• No. output channels: 8
• Supply Voltage Range: 2V to 6V
• Package Type: DIP
• Pin number: 16
• Operating temperature range: -55 ° C to +125 ° C
• SVHC: No SVHC
• Device label: 74
• Device Marking: HD74HC138P
• Package Type: DIP
• Operating Temperature Min: -55 ° C
• highest working temperature: 125 ° C
• Supply Voltage: 6V
• Supply voltage: 6V
• The minimum supply voltage: 2V
• chip label: 74HC138
• Surface Mount Devices: through-hole mounting
• Output Current: 5.2mA
• logic chip function: Logic 4-to-16 Line Decoder / Demultiplexer
• logic chip series: HCSKU: 0413 -
3D Printer Filaments, CNC & 3D Printers, EXYZ Filaments
EXYZ PETG 1.75mm 3D Printer Filament 1kg/Roll
3D Printer Filaments, CNC & 3D Printers, EXYZ FilamentsEXYZ PETG 1.75mm 3D Printer Filament 1kg/Roll
EXYZ PETG Filament 1.75mm, PETG 3D Printer Filament, Dimensional Accuracy 1.75mm, 1kg(2.2lbs) Cardboard Spool 3D Printing Filament Fits for Most FDM 3D Printers. This High quality PETG Filament available at electrobes has weight of 1Kg.
SKU: PF-028 -
Accessories, Adapters, Batteries & Chargers
9V 1000mA / 1 Amp 9W SMPS Power Adapter
- Stabilized Output, low ripple & low interference
- Ideal for CCTV Cameras / Routers / Modems / Cordless Phones / Set Top Boxes / Wireless Devices / POS Machines etc.
- Plug Type – 2 Pin or 3 Pin as per availability
- 5.5mm DC Pin
SKU: 0780 -
-
Planes And Copters, Robotics & Machines
1000KV A2212 Brushless DC Motor BLDC Rotor for Quadcopter Drone
Planes And Copters, Robotics & Machines1000KV A2212 Brushless DC Motor BLDC Rotor for Quadcopter Drone
This is a brushless outrunner 1000kv motor specifically made for quadcopters and multirotors. 1000 kv motors are perfect for medium size quadcopters F450 frame with 8 inch to 10 inch propellers.
SKU: 0974 -
Servos & Controllers
Large U Beam Servo Bracket PTZ Robotic Manipulator DIY Robot Mount
This Long ‘U’ shaped brackets is designed to fit most standard sized servos. This bracket is both lightweight and strong. Various holes are located on the bracket that fit most servo horns.
These brackets are light and strong and the numerous mounting holes enable you to easily make custom mechanisms using standard servo motors. Works great for making multi-axis joints for use in robot arms and legs.
SKU: 1871 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 13S 48V 30A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 13S 48V 30A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS Li-ion 13S 48V 30A BMS Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-009 -
Discrete Electronic Components, General Electronics
Micro USB OTG to USB 2.0 Adapter for Smartphones & Tablets
Discrete Electronic Components, General ElectronicsMicro USB OTG to USB 2.0 Adapter for Smartphones & Tablets
Small size, easy to plug-and-play, Compatible with Android devices with micro USB port. Widely applied for U disk, mouse, keyboard, USB fan, camera, game console, MP3 player, etc. with USB 2.0 port. Make your life more convenient and comfortable.
SKU: 1571 -
Planes And Copters, Robotics & Machines
KK2.1.5 Multi-Rotor Flight Controller Board with LCD, MPU6050 Gyroscope and Atmel MEGA644PA Controller
-17%
Planes And Copters, Robotics & MachinesKK2.1.5 Multi-Rotor Flight Controller Board with LCD, MPU6050 Gyroscope and Atmel MEGA644PA Controller
KK2.1.5 Multi-Rotor Flight Controller Board with LCD, MPU6050 Gyroscope and Atmel MEGA644PA Controller for Fixed wing Aircraft Quadcopter and Drones. Buy in Pakistan
SKU: 1830 -
Analog, Discrete Electronic Components, ICs
74LS90 7490 4-BIT Binary Decade BCD Counter IC
74LS90 Binary Counter Features
- It is used as a simple counter from 0 – 9.
- The IC has the ability to start from 0 and end at 9 automatically.
- IC can be used any TTL based device and microcontroller due to its TTL output.
- The IC has low power consumption.
- IC comes in multiple packages, PDSO, PDIP, and GDIP
- The IC has internal protection from clamp voltages.
SPECIFICATION
- The Power input range for IC is 4.75 to 5.25.
- The operating temperature range for IC is 0 to 70.
- The input voltages range for IC at HIGH state is 2.0 minimum and the LOW state is 0.7 maximum.
- IC draws output current at HIGH state is -0.4mA and for the LOW state is 8.0mA
- The internal clamp diode protection range is -1.5V.
More information is available in the datasheet:
SKU: 1582 -
Adapters, Batteries & Chargers
48V 15A 720W Switching Mode Power Supply SMPS Adapter
48V power supplies (or 48VDC power supplies) are one of the most common power supplies in use today. In general, a 48V DC output is obtained from a 110VAC or 220VAC input using a combination of transformers, diodes and transistors.
SKU: CNC-190 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
BH1750 Digital Light Intensity Sensor Module
-30%
General Sensors, Modules and Breakout Boards, Sensors & TransducersBH1750 Digital Light Intensity Sensor Module
This is a BH1750 light intensity sensor breakout board with a 16 bit AD converter built-in which can directly output a digital signal, there is no need for complicated calculations. This sensor is available at electrobes online in Pakistan.
SKU: 0143 -
-
-
EV Parts, Mechanical, Motors and Driver
MY1016Z3 24V 350W DC 9T Gear Reduction Electric Motor For Electric Scooter Bicycle Kit
EV Parts, Mechanical, Motors and DriverMY1016Z3 24V 350W DC 9T Gear Reduction Electric Motor For Electric Scooter Bicycle Kit
MY1016Z3 DC Gear Reduction Electric Motor 24V 350W Electric Scooter Bicycle Conversion Motor with 9T Gear for Electric Scooter Bicycle Kit, High Torque Metal Electric DC gear motor. We offer you this motor at best price online in Pakistan.
SKU: EB-09 -
-
Breakout Boards, Modules and Breakout Boards
nRF24L01 Breakout Adapter with On-board 3.3V Regulator
Buy online nRF24L01 Breakout Adapter with On-board 3.3V Regulator in Pakistan. is one of the famous wireless RF module for makers. There are tones of tutorials uses this module for wireless communication.
SKU: 0117 -
3D Printer Filaments, CNC & 3D Printers
Bambu PC White with Bambu Reusable Spool 1.75mm 3D Printer Filament 1kg/Roll
3D Printer Filaments, CNC & 3D PrintersBambu PC White with Bambu Reusable Spool 1.75mm 3D Printer Filament 1kg/Roll
eSUN PLA 3D Printer Filament, Dimensional Accuracy 1.75mm, 1kg(2.2lbs) 3D Printing Filament Fits for Bambulab X1 Carbon, X1E FDM 3D Printers. This High quality PLA Filament available at electrobes has weight of 1Kg.
SKU: PF-035 -
-
-
Mechanical, Motors and Driver
12V DC Small Speed Reduction Gear Motor Metal With 65mm Wheel
Silver 25GA370 DC Gear-Box Reducer Electric Motor with Wheel, coupler, mount and screws robotic car wheel complete kit to be mounted directly on a 2wd and 4wd chassis used in line following robot, obstacle avoidance car, driver less robotic car, automatic surveillance robotic vehicle. You can get this product at best price in Pakistan.
SKU: 1756 -
Modules and Breakout Boards, Sensors & Transducers
ACS712 20A 20 Amp Current Sensor Module
The ACS712 Module uses the famous ACS712 IC to measure current using the Hall Effect principle. The module gets its name from the IC (ACS712) used in the module, so for you final products use the IC directly instead of the module.
SKU: 0756 -
-
3D Printer Filaments, CNC & 3D Printers
ERYONE Standard PLA 1.75mm 3D Printer Filament 1kg/Roll
ERYONE Standard PLA Filament 1.75mm 3D Printer Filament, Dimensional Accuracy 1.75mm, 1kg(2.2lbs) Cardboard Spool 3D Printing Filament Fits for Most FDM 3D Printers. This High quality PLA Filament available at electrobes has weight of 1Kg.
SKU: PF-023 -
Breakout Boards, Modules and Breakout Boards
W5500 SPI to Ethernet LAN Network Module
The Ethernet module for Arduino and compatible boards based on the Wiznet W5500 chip, faster than the previous W5100. It provides an easy way to connect your module to the local network and internet based WIZNET with a TCP/IP interface. Compatible with libraries with the same Ethernet API. A web server can be built with this shield. It can be used as a server or as a client.
SKU: 1538 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
5v Laser Receiver Module High Level Laser Light Detected Sensor Module For Arduino
General Sensors, Modules and Breakout Boards, Sensors & Transducers5v Laser Receiver Module High Level Laser Light Detected Sensor Module For Arduino
Laser Receiver Sensor Module, Output high level when receive laser signal, Output low level when not receive laser signal. Buy online in Pakistan. Working at 5V.
SKU: 0136 -
3D Printers, CNC & 3D Printers
Anycubic Kobra 3 Max FDM 3D Printer, 420x420x500mm Largest Bed Size, 600mm/s High Speed 3D Printer
3D Printers, CNC & 3D PrintersAnycubic Kobra 3 Max FDM 3D Printer, 420x420x500mm Largest Bed Size, 600mm/s High Speed 3D Printer
● The Largest Consumer-Grade Multicolor 3D Printer
● 420*420*500mm Print Volume
● Support Latest ACE PRO Flawless 8-Color Printing
● Precise Auto-Leveling & Anti-Step Lost
● Filament Box with Drying Capability
● 600mm/s High-Speed Printing
● Anycubic Slicer Next & Anycubic App UpgradeSKU: TDP-074 -
Discrete Electronic Components, ICs, Microcontrollers
PIC12C508A Microcontroller IC
PIC 12C508 belongs to the family of high performance and cost effective micro controllers. It is a fully static eight (8) bit device. PIC 12C 508 micro controller is Complementary Metal Oxide Semiconductor (CMOS) which is based on EEPROM, EPROM and ROM.
SKU: 0244 -
Capacitors, Discrete Electronic Components, Non polarized
471 470pf Multilayer Ceramic Monolithic Capacitor
Capacitors, Discrete Electronic Components, Non polarized471 470pf Multilayer Ceramic Monolithic Capacitor
- Type: Monolithic Ceramic Capacitor
- Model Number: 471
- Package Type: Through Hole
- Rated Voltage: 50V
- Pin Pitch: 5.08mm
- Accuracy: +/- 5%
- Structure: Fixed Capacitor
- Color: Yellow
- Application: General Purpose
SKU: 0333 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS LFP LifePo4 8S 24V 30A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS LFP LifePo4 8S 24V 30A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
DALY BMS 8S 24V LifePO4 PCB Protection Board with Balance Wire and Temperature Sensor for 8 3.2V Cells 24V LiFePO4 Lithium Battery Pack with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-033 -
DIP Transistors, Discrete Electronic Components, Transistors
BC516 PNP Darlington Transistor
- Type – PNP
- Collector-Emitter Voltage: -30 V
- Collector-Base Voltage: -40 V
- Emitter-Base Voltage: -10 V
- Collector Current: -1 A
- Collector Dissipation – 0.625 W
- DC Current Gain (hfe) – 30000
- Transition Frequency – 200 MHz
- Operating and Storage Junction Temperature Range -55 to +150 °C
- Package – TO-92
SKU: 0457 -
-
-
-
-
-
-
EV Parts
48-72V 1200W-1500W 35A DC Brushless Motor Controller Electric Bike Controller Speed Controller for Brushed Motor Electric Bicycle Parts E-bike Controller
EV Parts48-72V 1200W-1500W 35A DC Brushless Motor Controller Electric Bike Controller Speed Controller for Brushed Motor Electric Bicycle Parts E-bike Controller
Electric Scooter Controller 48-72V 1200-1500W 35A DC Brushless Motor Controller Electric Bike Controller Speed Controller for Brushless Hub Motor Electric Bicycle Parts E-bike Controller EV Accessories Parts. The battery type can be Lithium battery, Lead Acid battery etc.
SKU: EB-39 -
Consumer Electronics, EV Parts
Universal Digital Odometer Power Meter Speedo Meter Instrument for Electric Tricycle Motorcycle Scooter
Consumer Electronics, EV PartsUniversal Digital Odometer Power Meter Speedo Meter Instrument for Electric Tricycle Motorcycle Scooter
Digital Odometer Power Meter Speedo Meter Instrument for Electric Tricycle, Motorcycle, Scooter, E-kart, Electric rikshaw and electric bicycle etc. We have all items required for electric scooter in stock. You can also get other related components like BLDC motor, speed controller and switches at electrobes-com-827299.hostingersite.com at cheaper price in Pakistan.
SKU: 1635 -
Discrete Electronic Components, General Electronics
Digital Water PH Tester, 0-14 Measuring Value, 0.01 High Accuracy PH Meter
Discrete Electronic Components, General ElectronicsDigital Water PH Tester, 0-14 Measuring Value, 0.01 High Accuracy PH Meter
- Ideal for residential or commercial use, water, pool, spas, liquid food, laboratory, aquaculture and hydroponics
- Advanced technology makes the test result fast and accurate
- With Automatic Temperature Compensation (ATC), adjust to water temperature and give pH reading almost instantly
- Use “Calibration Buffer Powder” to calibrate the tester with one button.
- pH tester bright backlit LCD display, you can still see even in low visibility situations.
SKU: 1881 -
Microcontrollers & Programmers, Modules and Breakout Boards
51 AVR Programmer ISP USBASP USB ISP Download Cable
Microcontrollers & Programmers, Modules and Breakout Boards51 AVR Programmer ISP USBASP USB ISP Download Cable
Applicable to WIN 8.1/8/7/XP 32-bit/64-bit system computer.
The product can be directly connected with the computer USB port, the real USB download device, through which to connect the target board the microcontroller can be downloaded programming easy to use, especially for notebook computers, desktop computer, through the USB port programming download debugging.SKU: 1406 -
Accelerometer, Gyroscope & Navigation, Modules and Breakout Boards, Sensors & Transducers
GY-61 ADXL335 Tripple Axis Compass Accelerometer Module
Accelerometer, Gyroscope & Navigation, Modules and Breakout Boards, Sensors & TransducersGY-61 ADXL335 Tripple Axis Compass Accelerometer Module
GY-61 ADXL335 Tripple Axis Compass Accelerometer Module includes optional header pins and provides easy access to the X, Y and Z axis. Buy online in Pakistan.
SKU: 0153 -
Discrete Electronic Components, General ICs, ICs
74HC192E 74LS192 4 Bit BCD Presettable Decade UP/DOWN Counter IC
Discrete Electronic Components, General ICs, ICs74HC192E 74LS192 4 Bit BCD Presettable Decade UP/DOWN Counter IC
Counter Type BCD/Decade Counter Counter Category Synchronous Counter Direction Bidirectional Supply Voltage 4.5 Package Type SOIC, PLASTIC, MS-012, SOIC-16 Logic Family CMOS, HC/UH Number of Pins 16 Number of Stages (Bits) 4 bits Clock Frequency 23 MHz Operating Temperature -55 to 125 C (-67 to 257 F) SKU: 0563 -
DIP Transistors, Discrete Electronic Components, Transistors
BD137 1.5 A 60V NPN Bipolar Power Transistor
DIP Transistors, Discrete Electronic Components, TransistorsBD137 1.5 A 60V NPN Bipolar Power Transistor
- Type – NPN
- Collector-Emitter Voltage: 60 V
- Collector-Base Voltage: 60 V
- Emitter-Base Voltage: 5 V
- Collector Current: 1.5 A
- Collector Dissipation – 12.5 W
- DC Current Gain (hfe) – 40 to 250
- Operating and Storage Junction Temperature Range -55 to +150 °C
- Package – TO-126
SKU: 0447 -
Audio & Visual, Camera & Imaging, Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry Pis
Nigh Vision Raspberry Pi Camera Board v1.3 (5MP, 1080p)
Audio & Visual, Camera & Imaging, Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry PisNigh Vision Raspberry Pi Camera Board v1.3 (5MP, 1080p)
Night Vision Raspberry Pi Camera Board v1.3 It’s able to deliver a crystal clear 5MP resolution image, or 1080p HD video recording at 30fps. Buy online in Pakistan.
SKU: 1484 -
Modules and Breakout Boards, Sensors & Transducers, Temperature Sensor
MAX6675 Module + K Type Thermocouple
Modules and Breakout Boards, Sensors & Transducers, Temperature SensorMAX6675 Module + K Type Thermocouple
This temperature sensor and module makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) to provide accurate temperature compensated measurement of the supplied K-Type thermocouple sensor. This sensor is available at electrobes shop online in Pakistan.
SKU: 0141 -
CNC & 3D Printers, CNC Machine Parts
PCB Drill Bit Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank
CNC & 3D Printers, CNC Machine PartsPCB Drill Bit Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank
0.35, 0.6, 0.8, 0.9, 1.0, 1.1, 1.2, 1.3, 1.4, 1.5, 2.0, 2.3, 2.4, 2.5, 2.6, 3.0, 3.1mm Tungsten Carbide CNC Engraving Print Circuit Board PCB Drill Bits Drilling Tool at best price in Pakistan
SKU: CNC-010 -
Antennas, Discrete Electronic Components
433MHz SMA Antenna Male Type with SMA Male Connector
A small, high-quality, quad-band, common-used, standard SMA (internal male pin), 433MHz antenna with 2dBi gain SMA Ra Plastic Duct RF Transmitter and Receiver Antenna Male Type Right Angle SMA Connector.
SKU: 1727 -
General Electronic Boards, Modules and Breakout Boards
50KG Half-bridge Body Scale Load Cell Weighing Weight Sensor Strain Gauge
General Electronic Boards, Modules and Breakout Boards50KG Half-bridge Body Scale Load Cell Weighing Weight Sensor Strain Gauge
Buy online 50KG Half-bridge Body Scale Load Cell Weighing Weight Sensor Strain Gauge in Pakistan. the correct force is applied to the outer side of the strain E-shaped beam portion of the sensor.
SKU: 0686 -
Audio & Visual, LCD & Display
MAX7219 Dot LED Matrix 4×1 Module MCU Control Unit
- MAX7219 is an integrated serial input / output common-cathode display driver, it connects the microprocessor 7-segment digital LED display with 8 digits, you can also connect a bar graph display or 64 independent LED. Thereon including a B-type BCD encoder chip, multi-channel scanning loop segment word driver, but also a static RAM 8 * 8 for storing each data. Only one external register is used to set the segment current of each LED.
- A convenient four-wire serial interface can be connected to all general-purpose microprocessor. Each data can be addressed in the update do not need to rewrite all of the display. MAX7219 also allows each user to select a data coding or non-coding.
- The entire device contains a 150μA low-power shutdown mode, analog and digital brightness control, a scan-limit register allows the user to display data bits 1-8, and one for all LED luminescence detection mode.
- It requires only three IO ports to drive a dot matrix! No flicker when the dot matrix display! Support cascading!
SKU: 1226 -
Discrete Electronic Components, General ICs, ICs
74LS17 7417 HEX Buffer HD7417 High Voltage Open Collector IC
Discrete Electronic Components, General ICs, ICs74LS17 7417 HEX Buffer HD7417 High Voltage Open Collector IC
- Convert TTL Voltage Levels to MOS Levels
- High Voltage Open Collector
- High Sink-Current Capability Design
- HEX Buffer
- Open-Collector Driver for Indicator Lamps
- Inputs Fully Compatible With Most TTL Circuits
SKU: 0569 -
Essential tools, Instruments & Tools
JAKEMY JM-T1-11 Professional Long Pointed Tip Tweezers
Jakemy JM-T1-11 professional extra strength tweezers the head section adopts a special processing process, which can maintain good work performance It is widely used in electronic care, chemical industry, assembly, beauty, gardening, etc.
SKU: 1351 -
EV Parts, Mechanical, Motors and Driver
DC48-60V High Power Brushless Motor 1300W DC Brushless Motor No Hall High Torque BLDC Motor
EV Parts, Mechanical, Motors and DriverDC48-60V High Power Brushless Motor 1300W DC Brushless Motor No Hall High Torque BLDC Motor
800-1300W high-power brushless motor voltage: 48-60V Hall free brushless motor, which can be driven by an electric vehicle dual mode controller sold on Taobao. It can also be used as a high-power generator.
SKU: 1755 -
Discrete Electronic Components, ICs, Microcontrollers
Atmel 8051 AT89C51 AVR 40 Pin DIP Microcontroller
Discrete Electronic Components, ICs, MicrocontrollersAtmel 8051 AT89C51 AVR 40 Pin DIP Microcontroller
- Compatible with MCS-51 Products
- 4K Bytes of In-System Reprogrammable Flash Memory
- Endurance: 1,000 Write/Erase Cycles
- Fully Static Operation: 0 Hz to 24 MHz
- Three-Level Program Memory Lock
- 128 x 8-Bit Internal RAM
- 32 Programmable I/O Lines
- Two 16-Bit Timer/Counters
- Six Interrupt Sources
- Programmable Serial Channel
- Low Power Idle and Power Down Modes
SKU: 1451 -
Modules and Breakout Boards, STM Boards
STM32F303 Discovery Evaluation Development Board
The STM32F3DISCOVERY is a discovery kit based on STM32F303VCT6 microcontroller with 256KB flash, 48KB RAM. The STM32F303VCT6 is based on the high performance ARM Cortex-M4 32bit RISC core with FPU operating at a frequency of up to 72MHz and embedding a floating point unit (FPU), a memory protection unit (MPU) and an embedded trace macrocell (ETM). The STM32F3DISCOVERY helps to discover the STM32F3 series Cortex-M4 mixed signals features and to develop our applications easily.
SKU: 1323
