[vc_row][vc_column]
-
3D Printer Parts, CNC & 3D Printers, Mechanical, Motors and Driver
Motor Dual Z Stepper Motor Parallel Module Stepping Motor Board With Cable For 3D Printer Kit
3D Printer Parts, CNC & 3D Printers, Mechanical, Motors and DriverMotor Dual Z Stepper Motor Parallel Module Stepping Motor Board With Cable For 3D Printer Kit
This module is only used for motor-side parallel, a driver drives two motors. And only for mini printers or small current motors in parallel (with the same motor in parallel, the current are divided evenly).
SKU: CNC-134 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 16S 60V 30A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 16S 60V 30A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS 16S 60V Lithium Li Ion Battery Pack BMS With Balance And Waterproof 20A 30A 40A 50A 60A Used For 60V Ebike Scooter PCB PCM Board Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-014 -
Discrete Electronic Components, Filter & Amplifiers, ICs
LM741 UA741 Operational Amplifier Op-amp IC
- LM741 has only one op-amp inside, there are some op-amp IC’s having more than one op-amp like LM358, LM148, LM248, LM348
- Provided with short circuit and overload protection.
- Low power consumption.
- Large common mode rejection ratio (CMRR) and differential voltage ranges.
- No external frequency compensation is required.
- Prevent from latch-up when common-mode range is exceeded.
- Minimum, normal and maximum Power Consumption for this IC is ±10v, ±15v and ±22v respectively.
- Operating temperature should be -50 to 125 ˚C.
- Supply current – 1.7 to 2.8mA.
- Soldering pin temperature – PDIP package – 260 ˚C (for 10 seconds – prescribed)
- TO-99 and CDIP – 300 ˚C (for 10 seconds – prescribed)
- Available packages: TO-99, CDIP & PDIP
SKU: 0423 -
-
Discrete Electronic Components, General ICs, ICs
3 to 8 line Decoder / Demultiplexer 74HC138
• Logic Type: decoder / demultiplexer
• No. output channels: 8
• Supply Voltage Range: 2V to 6V
• Package Type: DIP
• Pin number: 16
• Operating temperature range: -55 ° C to +125 ° C
• SVHC: No SVHC
• Device label: 74
• Device Marking: HD74HC138P
• Package Type: DIP
• Operating Temperature Min: -55 ° C
• highest working temperature: 125 ° C
• Supply Voltage: 6V
• Supply voltage: 6V
• The minimum supply voltage: 2V
• chip label: 74HC138
• Surface Mount Devices: through-hole mounting
• Output Current: 5.2mA
• logic chip function: Logic 4-to-16 Line Decoder / Demultiplexer
• logic chip series: HCSKU: 0413 -
CCTV and IP Cameras
Dual Camera Wireless security camera – 2mp – V380 Pro
1. Remote viewing through the free App on your smart Phone
2. The alert will be pushed to your phone if any motion is detected
3. Amazing night vision, You could switch between B/W & color mode even in the night!
4. 360°Pan/Tilt Camera, with the 1080P high resolution, we can enjoy the panoramic viewing no blind angle
5. Two Way Audio, talk back with people near the cameras whether you’re in the backyard or halfway around the world
SKU: CAM-017 -
Modules and Breakout Boards, Sensors & Transducers, Temperature Sensor
DS18B20 Temperature Sensor Waterproof Digital Thermal Probe Temp Sensor – 1M Lead Length
-3%
Modules and Breakout Boards, Sensors & Transducers, Temperature SensorDS18B20 Temperature Sensor Waterproof Digital Thermal Probe Temp Sensor – 1M Lead Length
- Sensors For Arduino DS18b20 Temperature Sensor Module
- Product Type : Temperature sensor Module
- Voltage range : 3.5 – 5V DC
- Length : 100 cm.
SKU: 1164 -
Modules and Breakout Boards, Wireless Communication
Sim800L GSM / GPRS Module with Micro Sim Card with Helical Antenna (PTA Non-approved)
-28%
Modules and Breakout Boards, Wireless CommunicationSim800L GSM / GPRS Module with Micro Sim Card with Helical Antenna (PTA Non-approved)
Sim800L GSM / GPRS is a miniature cellular module which allows for GPRS transmission, sending and receiving SMS and making voice calls. Buy online in Pakistan.
SKU: 0134 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
JK Smart BMS LFP Li-ion 8S-24S 150A BMS Battery Management System for Li-ion Lifepo4 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsJK Smart BMS LFP Li-ion 8S-24S 150A BMS Battery Management System for Li-ion Lifepo4 Battery Pack Balanced Charging Board
JKBMS is a leading brand in power battery management systems (BMS), dedicated to advancing “active balancing technology for lithium batteries.”
- Active Balancing: Optimizes battery performance and lifespan.
- Wireless Communication: Allows real-time monitoring and control.
- Functional Safety: Ensures safety and reliability across applications.
- Capacity Management: Boosts battery efficiency and utilization.
SKU: BMS-045 -
-
Modules and Breakout Boards
HC SR505 PIR Motion Sensor Module
HC-SR505 is mini PIR (Passive Infra Red) motion sensor module, which as the name implies used for detecting the motion of a body in front of it. The device works based on infrared technology and it can automatic control by itself with high sensitivity and high reliability. Because of the minimum size and low-power operation mode, it widely used in battery-powered applications.
SKU: 0749 -
EV Parts, Mechanical, Motors and Driver
MY1016Z3 24V 350W DC 9T Gear Reduction Electric Motor For Electric Scooter Bicycle Kit
EV Parts, Mechanical, Motors and DriverMY1016Z3 24V 350W DC 9T Gear Reduction Electric Motor For Electric Scooter Bicycle Kit
MY1016Z3 DC Gear Reduction Electric Motor 24V 350W Electric Scooter Bicycle Conversion Motor with 9T Gear for Electric Scooter Bicycle Kit, High Torque Metal Electric DC gear motor. We offer you this motor at best price online in Pakistan.
SKU: EB-09 -
Discrete Electronic Components, General ICs, ICs
74LS17 7417 HEX Buffer HD7417 High Voltage Open Collector IC
Discrete Electronic Components, General ICs, ICs74LS17 7417 HEX Buffer HD7417 High Voltage Open Collector IC
- Convert TTL Voltage Levels to MOS Levels
- High Voltage Open Collector
- High Sink-Current Capability Design
- HEX Buffer
- Open-Collector Driver for Indicator Lamps
- Inputs Fully Compatible With Most TTL Circuits
SKU: 0569 -
-
3D Printer Parts, CNC & 3D Printers
SC10UU SCS10UU 10mm Linear Motion Ball Bearing Machinery Slide Bushing CNC
3D Printer Parts, CNC & 3D PrintersSC10UU SCS10UU 10mm Linear Motion Ball Bearing Machinery Slide Bushing CNC
SC10UU 10mm Linear Motion Bearing Slide Bushing Block Unit for CNC 3D Printer is used on hardened steel shafts. This is ideal for small CNC applications. We have all accessories related to CNC machines and 3D printers in Pakistan.
SKU: CNC-026 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS LFP LifePo4 20S 60V 20A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS LFP LifePo4 20S 60V 20A BMS Battery Management System for Lifepo4 Battery Pack Balanced Charging Board
DALY BMS 20S 60V LifePO4 PCB Protection Board with Balance Wire and Temperature Sensor for 20 3.2V Cells 60V LiFePO4 Lithium Battery Pack with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-035 -
Robotics & Machines, Stepper Motors & Drivers
Nema17 6-12V Stepper motor 1.8/step 6 Wire (Used)
NEMA17 6 Wire Bipolar Stepper Motor NEMA17 Stepper Motor NEMA 17 Stepper Motors very useful in the various application especially which demands low speed with high precision Many machines such as 3D Printers CNC Router and Mills Camera Platforms XYZ Plotters etc Nema17 4 wire Bipolar Stepper.
SKU: 1591 -
Batteries & Chargers, Rechargeable
3.7V 1800mAh Rechargeable 18650 Li-Ion Battery Cell – New
We are providing this 1800mAh Li-Ion Rechargeable Li-ion 18650 Cell at the best price in the market for our customers. These are powerful cells with higher number of life cycles and charging capacity compared to other cells available online in Pakistan.
SKU: 1803 -
Buttons, Switches & Pads, Connectivity, Touch Switch
1 Channel Capacitive Touch Module – TTP223
A capacitive touch sensor module based on the dedicated TTP223 touch sensor IC. The module provides a single integrated touch sensing area of 11 x 10.5mm with a sensor range of ~5mm. An on-board LED will give a visual indication of when the sensor is triggered.
SKU: 0643 -
-
Discrete Electronic Components, Potentiometer & Knobs, Resistors
100K Ohm Rotary Potentiometer / Variable Resistor
Discrete Electronic Components, Potentiometer & Knobs, Resistors100K Ohm Rotary Potentiometer / Variable Resistor
- Linear Taper Rotary Type Potentiometer
- Model: B1M
- PCB Mounted
- Breadboard Friendly
- Resistance Value: 1M ohm
- Power: 1/2W
- Adjustment Type: Top Adjustment
- Type: Single Linear (Type B)
- Features: Knurled Shaft
- Shaft Diameter: 6mm / 0.23″
- Shaft Length: 13mm / 0.51″
- Mounting Hole: 7.5mm / 0.29″
- Base Height: 7mm / 0.27″
- Base Diameter: 16mm / 0.62″
- Material: Metal w Electronic Parts
- Color: As Shown In Picture
- Weight: 5g
SKU: 0204 -
Discrete Electronic Components, ICs, Logic Gates
74LS32 Quad 2-input OR Gate IC
- Operating voltage range: +4.75 to +5.25V
- Recommended operating voltage: +5V
- Maximum supply voltage:7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Typical Rise Time: 18ns
- Typical Fall Time: 18ns
- Operating temperature:0°C to 70°C
- Storage Temperature: -65°C to 150°C
SKU: 0410 -
-
3D Printer Filaments, CNC & 3D Printers
SUNLU TPU 1.75mm Flexible 3D Printer Filament 95A Shore Hardness 0.5kg Roll
3D Printer Filaments, CNC & 3D PrintersSUNLU TPU 1.75mm Flexible 3D Printer Filament 95A Shore Hardness 0.5kg Roll
SUNLU 500g/roll TPU filament is made of all flexible materials that can be bended easily, compact and portable. High quality TPU filament adopts the most advanced and soft imported cork, with excellent heat dissipation performance.
SKU: PF-036 -
Discrete Electronic Components, Educational & DIYs, Tools & Accessories
Power Bank Module Dual USB Output Micro USB Port
Discrete Electronic Components, Educational & DIYs, Tools & AccessoriesPower Bank Module Dual USB Output Micro USB Port
DIY Power bank housing shell with night high intensity LED torch, 2 USB ports, 4 Led backup status, Charge and discharge protection, Built-in lithium battery protection IC on the circuit board, over and under voltage protection and over current protection.
SKU: 1704 -
Analog, Discrete Electronic Components, ICs
74LS160 74160 74HC160 4-Bit Synchronous Decade Counter
The 74LS160 IC package, consisting of 16 pins, contains a single 4 bit synchronous counter circuit which can be wired for decade counting mod, without external logic chips. By wiring more than one 74LS160 together (cascading), it is possible to make higher count lengths (powers of ten). For example, two 74LS160s cascaded together would yield a counter capable of decimally counting the range 00 – 99.
SKU: 1584 -
-
Consumer Electronics, EV Parts
48V/60V/72V Digital Odometer Power Meter Speedo Meter Instrument for Electric Tricycle Motorcycle Scooter
-22%
Consumer Electronics, EV Parts48V/60V/72V Digital Odometer Power Meter Speedo Meter Instrument for Electric Tricycle Motorcycle Scooter
Digital Odometer Power Meter Speedo Meter Instrument for Electric Tricycle, Motorcycle, Scooter, E-kart, Electric rikshaw and electric bicycle etc. We have all items required for electric scooter in stock. You can also get other related components like BLDC motor, speed controller and switches at electrobes-com-827299.hostingersite.com at cheaper price in Pakistan.
SKU: EB-32 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
ECG Module AD8232 Heart ECG Monitoring Sensor Module Kit for Arduino
General Sensors, Modules and Breakout Boards, Sensors & TransducersECG Module AD8232 Heart ECG Monitoring Sensor Module Kit for Arduino
ECG Module AD8232 Heart ECG Monitoring Sensor Module Kit Arduino Based use to measure the electrical activity of the heart. Buy in Pakistan at Electrobes.
SKU: 0629 -
Discrete Electronic Components, Filter & Amplifiers, ICs
LM386 Audio Amplifier IC
- Operating voltage range: +4.75 to +5.25V
- Recommended operating voltage: +5V
- Maximum supply voltage:7V
- Maximum current allowed to draw through each gate output: 8mA
- TTL outputs
- Low power consumption
- Typical Rise Time: 18ns
- Typical Fall Time: 18ns
- Operating temperature:0°C to 70°C
- Storage Temperature: -65°C to 150°C
SKU: 0421 -
Discrete Electronic Components, General Electronics
4×4 Matrix 16 Keypad Keyboard Module 16 Button for Arduino
Discrete Electronic Components, General Electronics4×4 Matrix 16 Keypad Keyboard Module 16 Button for Arduino
- 4×4 Matrix Keyboard Module with 16 buttons
- Small in size and hence Save space
- More convenient to use
- Expanded development application modules for single chip
- With 16 keys and 8 pin
SKU: 1046 -
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry Pis
Raspberry Pi 4 model B 2GB Computer Development Board
-3%
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry PisRaspberry Pi 4 model B 2GB Computer Development Board
Raspberry Pi 4 has the ability to interact with the outside world & has been used in digital maker projects. Apart from that USB 3, dual HDMI, an upgraded CPU, camera and SD card slot and massive memory would provide much better performance to run applications.
SKU: 0747 -
-
Audio & Visual, LCD & Display
7 Segment BCD Display 0.5″ Common Cathode
- Available in two modes Common Cathode (CC) and Common Anode (CA)
- Available in many different sizes like 9.14mm,14.20mm,20.40mm,38.10mm,57.0mm and 100mm (Commonly used/available size is 14.20mm)
- Available colours: White, Blue, Red, Yellow and Green (Res is commonly used)
- Low current operation
- Better, brighter and larger display than conventional LCD displays.
- Current consumption : 30mA / segment
- Peak current : 70mA
SKU: 0471 -
Discrete Electronic Components, ICs, Logic Gates
74LS00 Quad 2-input NAND Gate IC
- Operating voltage range: +4.75 to +5.25V.
- Maximum supply voltage: 7V.
- Maximum current allowed to draw through each gate output: 8 mA.
- TTL outputs.
- Maximum ESD: 3.5 KV.
- Typical Rise Time: 15 ns.
- Typical Fall Time: 15 ns.
- Operating temperature: 0°C to 75°C
SKU: 0400 -
Heat Sinks
Heat Sink Aluminium made Self Adhesive Complete Set for Raspberry Pi
A complete set of heats sinks for Rapsberry pi, which provide coolant facility to Raspberry Pi. It is made of Pure Copper for better performance. The fins increase the area of the board and thus provide for greater heat transfer.
SKU: 0900 -
Audio & Visual, LCD & Display
2.4 Inch ILI9341 Touchscreen TFT LCD Display Screen Shield Module For Arduino UNO R3 Board
-20%
Audio & Visual, LCD & Display2.4 Inch ILI9341 Touchscreen TFT LCD Display Screen Shield Module For Arduino UNO R3 Board
- Color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor).
- Composed of a color TFT-LCD panel, driver IC, FPC and a back light unit. The module display area contains 320 x 240 pixels.
- The screen uses analog pins A0-A4 for LCD control and touch screen operations, which are in the same position on the UNO and the Mega, so the touch screen should work without any modification.
- The shield comes equipped with a micro SD card reader for easy access to use a software-based SPI library.
- Compatible with Arduino UNO R3 Mega2560 DUE.
SKU: 0177 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
5.8GHZ Microwave Radar Sensor Module XYC-WB-DC Smart Sensoring Switch 6-9M
-9%
General Sensors, Modules and Breakout Boards, Sensors & Transducers5.8GHZ Microwave Radar Sensor Module XYC-WB-DC Smart Sensoring Switch 6-9M
It uses Doppler radar technology, With the ability to automatically sensing to control another product, high sensitivity, sensor distance, reliability, wide-angle sensor, wide voltage range and other characteristics. Widely used in lighting conditions, anti-theft alarm is available online at electrobes-com-827299.hostingersite.com in Pakistan.
SKU: 0133 -
Converters, Modules and Breakout Boards
5V to 3.3V DC-DC Step down Converter Module Board AMS1117 3V3
Converters, Modules and Breakout Boards5V to 3.3V DC-DC Step down Converter Module Board AMS1117 3V3
Buy online 5V to 3.3V DC-DC Step down Converter Module Board AMS1117 3V3 in Pakistan. This AMS1117 3.3V Power Supply Module is great for your microcontroller projects and for various electronic prototypes. This is a high-performance module which provides a quick solution for powering your circuit.
SKU: 0745 -
Modules and Breakout Boards, Voltage, Current & Power
ZMPT101B Single Phase AC Voltage Sensor Module
This Single-phase AC active output voltage mutual inductance module is equipped with ZMPT101B series of high-precision voltage transformer and high-precision op-amp current, easy to 250v within the AC power signal acquisition.
SKU: 1620 -
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
DALY BMS Li-ion 13S 48V 30A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout BoardsDALY BMS Li-ion 13S 48V 30A BMS Battery Management System for 18650 Battery Pack Balanced Charging Board
DALY BMS Li-ion 13S 48V 30A BMS Battery Management System for 18650 Lithium ion Battery Pack With Balance Protection PCB Board with over-voltage protection charging module. Buy online in Pakistan
SKU: BMS-009 -
Modules and Breakout Boards, Voltage, Current & Power
Keweisi USB Current Voltage Charging Detector Mobile Power Current and Voltmeter Ammeter Voltage USB Charger Tester Double Row
Modules and Breakout Boards, Voltage, Current & PowerKeweisi USB Current Voltage Charging Detector Mobile Power Current and Voltmeter Ammeter Voltage USB Charger Tester Double Row
KEWEISI Dual USB Power Current Voltage Ampere Meter Tester Portable Current 0-3A & Volt 3-20V Detector Reader Multimeter USB Charger Doctor Digital Display Multifunction Capacity Voltmeter Ampere Meter Current Voltmeter Detector Tester in Pakistan
SKU: 0633 -
Audio & Visual, LCD & Display
7 Inch Nextion HMI Serial Touch Display Board Module NX8048T070 Multifunction HMI Resistive Touch
Audio & Visual, LCD & Display7 Inch Nextion HMI Serial Touch Display Board Module NX8048T070 Multifunction HMI Resistive Touch
The 7″ Nextion HMI LCD Capacitive Touch Display is a Seamless Human Machine Interface (HMI) display module solution that provides a control and visualization interface for any Raspberry Pi and Arduino kits. Nextion is mainly applied to lot or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube, and, it is best intelligent display module in the market.
SKU: 1719 -
3D Printer Filaments, CNC & 3D Printers, EXYZ Filaments
Jamg He 1.75mm Wood PLA 3D Printer Filament 1Kg Spool
3D Printer Filaments, CNC & 3D Printers, EXYZ FilamentsJamg He 1.75mm Wood PLA 3D Printer Filament 1Kg Spool
1.75mm Wood PLA Filament is strong and tough with a semi-glossy finish. It is made from high-quality biodegradable PLA (polylactic acid) plastic and may be used indoors, thanks to its eco-friendly design.
This 1kg (2.2 lb) spool of filament can tolerate print temperatures ranging from 320 to 356°F and may be used with most 3D printers that accept 1.75mm PLA filament and do not use heated build plates.
SKU: PF-040 -
IOT Development Board, Modules and Breakout Boards
ESP32 / ESP32-C3 WiFi+Bluetooth 5.0 Internet Of Things Dual Type-C Development Board Core Board ESP32-C3-DevKitM-1 For Arduino
IOT Development Board, Modules and Breakout BoardsESP32 / ESP32-C3 WiFi+Bluetooth 5.0 Internet Of Things Dual Type-C Development Board Core Board ESP32-C3-DevKitM-1 For Arduino
- ESP-C3 Introduce: An entry-level development board based on ESP-32-C3-MINI-1. This board has full Wi-Fi and BT LE functions.
- Boost your IoT development: ESPC3 mini1 is a powerful development board that helps you create your IoT projects easily.
- Latest technology: with the latest ESPC3 chipset, this mini board is faster to process and lower in power consumption.
- For technology enthusiasts: Whether you are an experienced developer or a beginner, this board is perfect for anyone who wants to explore the world of IoT.
- Versatile applications: ESP-C3 use it for home automation, wearables, robotics or other IoT applications that require reliable connectivity.
SKU: 1882 -
3D Printer Parts, CNC & 3D Printers, CNC Machine Parts
2060 V-Slot Aluminum Profile Extrusion for 3D Printer & CNC Machine
3D Printer Parts, CNC & 3D Printers, CNC Machine Parts2060 V-Slot Aluminum Profile Extrusion for 3D Printer & CNC Machine
- Black surface treatment, beautiful and durable.
- V slot aluminium profile can work as same as T slot aluminium profile, all T slot accessories (such as T nuts) can fit V slot aluminium profile.
- V slot aluminium profile support linear motion, you can build such as 3d printer and so on.
- V slot aluminium profile extrusions are perfect for custom machine frames, workstations, prototyping, guarding and many more purposes.
SKU: CNC-215 -
-
Connectors, Discrete Electronic Components, Row Headers
2.54mm 40 x 2 Female Row double Headers
- 80 pins
- 80 positions
- 3 AMP
- Breakaway
- 2.54 mm spacing
- 0.1 inch spacing
- Total pin length 11.5 mm
- Total pin length 0.453 inch
- Connector Mating pin length 6 mm
- Connector Mating pin length 0.236 inch
- PCB mating 3.mm
- PCB mating 0.118 inch
- Gold flash pins
- Double Row
- Ideal for Arduino
- Through Hole
SKU: 0582 -
3D Printer Parts, CNC & 3D Printers
Short Distance Bowden V6 Metal Hotend Extruder 1.75mm with Cooling Fan for 3D Printer
3D Printer Parts, CNC & 3D PrintersShort Distance Bowden V6 Metal Hotend Extruder 1.75mm with Cooling Fan for 3D Printer
- Model: J-Head Hot End V6
- Design: Short-Distance
- Improved processing of flexible filament
- More compact design
- Easier maintenance
- Reduced heating
- Improved temperature control and cooling
- Material: aluminum
- Nozzle: 0.4 mm
- Filament: 1.75 mm
- 12V 40W heating cartridge
- NTC thermistor 100k
- Cable length: approx. 90 cm
SKU: CNC-069 -
Discrete Electronic Components, General Electronics
Turbidity Sensor Suspended Turbidity Value Detection Module Kit Liquid Suspended Particles Turbidity Detection
Discrete Electronic Components, General ElectronicsTurbidity Sensor Suspended Turbidity Value Detection Module Kit Liquid Suspended Particles Turbidity Detection
Water Turbidity Sensor with Analog Output Module is an electronic monitoring module specially developed to work with microcontroller platforms Arduino, Raspberry Pi, PIC, ARM, AVR, among others. Buy online in Pakistan
SKU: 1447 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
5Kg Scale Bar Load Cell Weight Sensor
General Sensors, Modules and Breakout Boards, Sensors & Transducers5Kg Scale Bar Load Cell Weight Sensor
This straight bar load cell (sometimes called a strain gauge) can translate up to 5kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.
SKU: 0947 -
Batteries & Chargers, Rechargeable
EVE Brand New 3.2v 105ah lifepo4 battery cell for electric vehicles and Electric Bicycles/Scooters
Batteries & Chargers, RechargeableEVE Brand New 3.2v 105ah lifepo4 battery cell for electric vehicles and Electric Bicycles/Scooters
- Brand Name: EVE
- Model Number: LF105
- Battery Type: LiFePO4
- Product name: EVE LF105 3.2V 105Ah Forklift RV Engineering power cells
- Capacity: 105Ah
- Voltage: 3.2V
- Standard Charge-discharge rate: 0.5C(P)
- Cycling Performance: 4000 Cycles (25℃)、2000 Cycles（45℃）
- Charging Temperature: 0℃~65℃
- Discharging Temperature: -35℃~65℃
- Storage Temperature: 0℃~35℃
SKU: 1821-1 -
Planes And Copters, Robotics & Machines
HOTRC HT-10A 2.4GHz 10 Channels RC Transmitter and Receiver FHSS & 10CH Receive for FPV Drone RC Airplane Aircraft Boat Car Helicopter
Planes And Copters, Robotics & MachinesHOTRC HT-10A 2.4GHz 10 Channels RC Transmitter and Receiver FHSS & 10CH Receive for FPV Drone RC Airplane Aircraft Boat Car Helicopter
The Hotrc HT-10A 2.4GHz 10 Channels RC Transmitter and Receiver FHSS & 10CH Receiver for FPV Drone RC Airplane Aircraft Boat Car Helicopter is a simple, easy-to-use system that performs as well as working speed and range. Ideal for new riders or as an entry point into the Hobby.
SKU: RC-023 -
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry Pis
Raspberry Pi 5 Mini Computer Development Board – 8Gb Ram
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry PisRaspberry Pi 5 Mini Computer Development Board – 8Gb Ram
- Processor: Quad-core ARM Cortex-A76, capable of high performance for computing tasks.
- Memory: 8GB LPDDR4x RAM, ensuring smooth operation and the ability to handle complex workloads.
- Graphics: Dual 4K display output via micro-HDMI ports, supporting a rich visual experience.
- Connectivity:
- USB Ports: 2x USB 3.0 and 2x USB 2.0 ports for fast data transfer and peripheral connectivity.
- Networking: Gigabit Ethernet and dual-band 802.11ac Wi-Fi for robust and flexible network connections.
- Bluetooth: Bluetooth 5.0 for connecting to various devices and accessories.
- Storage: MicroSD card slot for easy and expandable storage options.
- Power: 5V USB-C power input, ensuring efficient power delivery and compatibility with a wide range of power supplies.
- GPIO: 40-pin GPIO header for interfacing with sensors, actuators, and other hardware.
SKU: 0897 -
-
Audio & Sound, Audio & Visual
Piezo Buzzer 95db High-decibel 3-24V Electronic Buzzer Beep Alarm Intermittent Continuous Beep
Audio & Sound, Audio & VisualPiezo Buzzer 95db High-decibel 3-24V Electronic Buzzer Beep Alarm Intermittent Continuous Beep
- Color: Black
- Alarm Diameter:22mm/0.86″
- Alarm Height:10mm/0.39”
- 2 Mounting Holes distance:30mm/1.18″
- 2 Wires length:90mm/3.54″
- Buzzer Type: Piezoelectric
- Sound Pressure Level 95 dB
- Rate Voltage: 12V DC
- Operating Voltage: 3 – 24V
- Max Current Rating 10mA
- Frequency 3900±500Hz
- Drive Method: Drive Circuit Built in Mounting Holes
SKU: 0685 -
Instruments & Tools, Meters
Mini Panel Mount Thermometer and Hygrometer Humidity Meter with Display
-13%
Instruments & Tools, MetersMini Panel Mount Thermometer and Hygrometer Humidity Meter with Display
This is Mini Hygrometer has dual readouts in one easy-to-use unit. This Hygrometer is best choice as compare to HTC 1 Meter and has a convenient size and quality construction. This Hygrometer is suitable for panel mounting. This digital incubator hygrometer humidity meter00 is with dependable reading with high accuracy. This incubator digital meter is with a remote sensor with 20cm of cable. Best FY12 incubator meter with probe, the display can be mounted outside of any object which you want to measure, while the sensor is inside getting an accurate reading.
SKU: 1082 -
Connectivity, Connectors, Discrete Electronic Components, Wires, Cables & Connectors
5V USB Charger power Cable to DC 5.5 mm plug / jack USB Power Cable
Connectivity, Connectors, Discrete Electronic Components, Wires, Cables & Connectors5V USB Charger power Cable to DC 5.5 mm plug / jack USB Power Cable
- Interface: USB to DC5.5*2.1MM. Internal and external negative
- Operating environment: temperature 0 ° C -40 ° C, humidity 10% -90%
- Storage environment: temperature below 20%-90 °C, humidity 10%-90%, altitude less than 3000 meters
- Power the other devices of the same interface through the USB port of the computer, such as: USB HUB,
- USB, USB fan, cartoon clock, radiator, 5V mini speaker, mobile power MP4MP5, etc.
SKU: 1593 -
Automation Gadgets
S923 MAX Intelligent 3DFace ID Door Lock with HD Video Intercom, Biometric, RFID, Passcode, Key Verification System
-8%
Automation GadgetsS923 MAX Intelligent 3DFace ID Door Lock with HD Video Intercom, Biometric, RFID, Passcode, Key Verification System
- 3D face recognition with 1 sec faster unlocking
- With HD Video intercom feature
- 6 methods to open the lock
- No Wiring Required
- Model S923 MAX
- Used for doors upto 40-100mm Thickness
- Elegant handle design with tempered glass
- Heavy duty lock
SKU: HA-014 -
-
3D Printer Parts, CNC & 3D Printers
10mm x 15mm Chain Cable Cover Drag Wire Carrier for 3D Printers & CNC Machines
-4%
3D Printer Parts, CNC & 3D Printers10mm x 15mm Chain Cable Cover Drag Wire Carrier for 3D Printers & CNC Machines
Buy online 10mm x 15mm Chain Cable Cover Drag Wire Carrier for CNC Machine And 3D Printer in Pakistan. Available in 300mm, 500mm, 800mm, 1000mm, 1200mm chain sizes. Electrobes has various accessories for 3D printers and CNC machines.
SKU: CNC-218 -
3D Printers, CNC & 3D Printers, DLP/SLA/Resin 3D Printer
ANYCUBIC Photon Mono M7 PRO 14K Resin 3D Printer
3D Printers, CNC & 3D Printers, DLP/SLA/Resin 3D PrinterANYCUBIC Photon Mono M7 PRO 14K Resin 3D Printer
ANYCUBIC Photon Mono M5s Pro Resin 3D Printer 14K HD Mono Chrome LCD 3x High Speed Printing Auto leveling Intelligent Detection Large Printing Volume resin SLA 3d printer available in Pakistan
SKU: TDP-044 -
Light and Infrared Sensors, Modules and Breakout Boards, Sensors & Transducers
DC 12V Human Infrared Sensor Switch Light Sensor Infrared PIR Motion Sensor Switch 180 Degree
Light and Infrared Sensors, Modules and Breakout Boards, Sensors & TransducersDC 12V Human Infrared Sensor Switch Light Sensor Infrared PIR Motion Sensor Switch 180 Degree
This is a 12V human infrared sensors, pyroelectric infrared technology, the use of industrial district-level chip, intelligent control, set energy saving, convenient and environmentally friendly one, very convenient. This module also comes in 220V AC variant.SKU: 0766 -
-
-
Adapters, Batteries & Chargers
24V 3A 75W Switching Mode Power Supply SMPS Adapter
24V power supplies (or 24VDC power supplies) are one of the most common power supplies in use today. In general, a 24V DC output is obtained from a 110VAC or 220VAC input using a combination of transformers, diodes and transistors.
SKU: CNC-187 -
Adapters, Batteries & Chargers
12V 10A 120W Switching Power Supply Driver
12V power supplies (or 12VDC power supplies) are one of the most common power supplies in use today. In general, a 12VDC output is obtained from a 110VAC or 220VAC input using a combination of transformers, diodes and transistors.
SKU: CNC-185 -
Adapters, Batteries & Chargers
48V 5A 240W Switching Mode Power Supply SMPS Adapter
48V power supplies (or 48VDC power supplies) are one of the most common power supplies in use today. In general, a 48V DC output is obtained from a 110VAC or 220VAC input using a combination of transformers, diodes and transistors.
SKU: CNC-191 -
Automation Gadgets
2-Gang Smart Home Wall Mount WiFi Switch APP Controlled Time Setting Touch Switch EU 100-240V
Automation Gadgets2-Gang Smart Home Wall Mount WiFi Switch APP Controlled Time Setting Touch Switch EU 100-240V
- Operation Mode: ON-OFF
- Material: Glass + ABS plastic
- Current Rating: 15 Amps
- Operating Voltage: 100-240 Volts
- Connector Type: Wireless
- Interface Type: Touch
- Controller Type: IFTTT, Google Assistant, Amazon Alexa
- Connectivity Protocol: Wi-Fi
- Color: White, Black, Gold
SKU: HA-021 -
Audio & Visual, LCD & Display
7 Inch 800*480 TJC Capacitive Touch HMI Serial Interface Display For Arduino and Raspberry Pi
-13%
Audio & Visual, LCD & Display7 Inch 800*480 TJC Capacitive Touch HMI Serial Interface Display For Arduino and Raspberry Pi
The 7″ TJC HMI LCD Touch Display is a Seamless Human Machine Interface (HMI) display module solution that provides a control and visualization interface for any Raspberry Pi and Arduino kits.
SKU: 1320 -
Discrete Electronic Components, Potentiometer & Knobs, Resistors
1K Ohm Rotary Potentiometer Variable Trimpot Resistor
Discrete Electronic Components, Potentiometer & Knobs, Resistors1K Ohm Rotary Potentiometer Variable Trimpot Resistor
This 1K trimmable potentiometer has a small knob built right in and it’s breadboard friendly to boot! Perfect for your next LCD contrast adjuster, opamp setting, or volume level. This model is B10K within the datasheet.
SKU: 0200 -
Discrete Electronic Components, Resistors, Surface Mount Resistors
1.5M Ohm 1206 1/4W 0.25W SMD Resistors
Discrete Electronic Components, Resistors, Surface Mount Resistors1.5M Ohm 1206 1/4W 0.25W SMD Resistors
- Resistor Type: Thick Film
- Resistance: 1.5M Ohm
- Tolerance (±): 1%
- Operating Temperature Min.: -55 °C
- Operating Temperature Max.: 155 °C
- Power Rating: 125 mW
- Body Length: 2 mm
- Voltage Rating – DC: 150 V
- Temperature Coefficient: 100 ppm/°C
- Termination Type: Wraparound
- Body Height: 0.55 mm
- Body Width: 1.25 mm
- Mounting Type: Surface Mount
- Resistor Case Style: 1206(3216)
- Power (Watts): 0.25W , 1/4W
SKU: 0290 -
Discrete Electronic Components, General Electronic Boards, Light Dependent Resistors, Modules and Breakout Boards, Resistors
HW-479 RGB LED Module ky-016 3 colour Led Board for Arduino
Discrete Electronic Components, General Electronic Boards, Light Dependent Resistors, Modules and Breakout Boards, ResistorsHW-479 RGB LED Module ky-016 3 colour Led Board for Arduino
The KY-016 RGB Three Color Module in Pakistan, easy-to-use module, compact size that allows you to create a wide variety of colors using a single RGB LED. RGB Three Color Module consists of a 5mm RGB LED, three 150Ω limiting resistors to prevent burnout, and four male header pins.
SKU: 0146 -
3D Printers, CNC & 3D Printers, FDM 3D Printers
CREALITY Ender-5 Plus FDM 3D Printer with Largest 350*350*400mm Build Volume
-6%
3D Printers, CNC & 3D Printers, FDM 3D PrintersCREALITY Ender-5 Plus FDM 3D Printer with Largest 350*350*400mm Build Volume
The Ender 5 Plus is a feature-rich 3D printer offering a large build volume, stable performance, and easy assembly. With a sizable 350x350x400mm print area, it enables the creation of impressive models and prototypes. Equipped with a robust frame, dual-axis stepper motors, and a direct drive extruder, it ensures precise and reliable prints.
The user-friendly interface and quick assembly process make it accessible to both beginners and experienced users, while its compatibility with various filaments expands the possibilities for creative projects. The Ender 5 Plus is a versatile and reliable choice for 3D printing enthusiasts available at electrobes at the best price online in Pakistan
SKU: TDP-014 -
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry Pis
Aluminum Alloy Armor Case for Raspberry Pi 5 Heatsink Cooler Case with Dual PWM Cooling Fan for Raspberry Pi 5 8GB/4GB
Modules and Breakout Boards, Raspberry Pi Compatibles, Raspberry PisAluminum Alloy Armor Case for Raspberry Pi 5 Heatsink Cooler Case with Dual PWM Cooling Fan for Raspberry Pi 5 8GB/4GB
Aluminium Alloy Case for Raspberry Pi 5, Pi5 Case with Dual Cooling Fans and 4PCS Heatsink Tape for Raspberry Pi 5 4GB/8GB (Raspberry Pi NOT Included)
SKU: 1888 -
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards
3S 40A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS Board Balanced Charging Module
Accessories, Batteries & Chargers, BMS (Battery Management System), Breakout Boards, Modules and Breakout Boards3S 40A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS Board Balanced Charging Module
3S 40A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS PCB Board with Protection and Balanced Charging Module. Buy online in Pakistan.
SKU: 1480 -
General Sensors, Modules and Breakout Boards, Sensors & Transducers
RCWL-0516 Doppler Radar Microwave Sensor Module Human Induction Detector Switch
General Sensors, Modules and Breakout Boards, Sensors & TransducersRCWL-0516 Doppler Radar Microwave Sensor Module Human Induction Detector Switch
This mini doppler radar sensor module is equipped with supporting DC 4-28V wide voltage This is a mini radar motion sensor module is equipped with RCWL-9196 chip based on the doppler microwave induction technology. It will automatically comtinuously output the high level TTL signel when there is motion. 360 degree no blind angle detection and maximum 7m sensoring distance with adjustable delay time and sensitivity. It is perfect for DIY microwave motion sensor light switch, human sensor toys, smart security devices, etc.
SKU: 0761 -
-
EV Parts
48-72V 2000W-2200W 40A DC Brushless Motor Controller Electric Bike Controller Speed Controller for Hub Motor Electric Bicycle Parts E-bike Controller
EV Parts48-72V 2000W-2200W 40A DC Brushless Motor Controller Electric Bike Controller Speed Controller for Hub Motor Electric Bicycle Parts E-bike Controller
Electric Scooter Controller 48-72V 2000-2200W 40A DC Brushless Motor Controller Electric Bike Controller Speed Controller for Brushless Hub Motor Electric Bicycle Parts E-bike Controller EV Accessories Parts. The battery type can be Lithium battery, Lead Acid battery etc.
SKU: EB-40 -
-
-
-
3D Printer Parts, CNC & 3D Printers
Titanium Alloy Heatbreak Throat for V6 RepRap 3D Printer Hotend 1.75mm Filament
3D Printer Parts, CNC & 3D PrintersTitanium Alloy Heatbreak Throat for V6 RepRap 3D Printer Hotend 1.75mm Filament
3D printer accessories E3D V6 titanium alloy red copper throat gold-plated high temperature resistant M7 thread. Electrobes has accessories and parts for CNC & 3D printers.
SKU: CNC-321 -
Discrete Electronic Components, Resistors, Through Hole Resistors
220K Ohm Axial 1/4W Resistor
This resistor has 220K value and 1/4W power. It is an Quarter Watt Resistor.
Resistance from electronic circuit elements; By limiting the current passing through the circuit, it has many different usage areas besides main objectives such as voltage division, transforming electrical energy to heat (resistance), especially in the protection of sensitive circuit elements.
SKU: 030 -
Adapters, Batteries & Chargers
5V 40A 200W DC Universal Regulated Switching Power Supply
12V power supplies (or 12VDC power supplies) are one of the most common power supplies in use today. In general, a 12VDC output is obtained from a 110VAC or 220VAC input using a combination of transformers, diodes and transistors.
SKU: CNC-198 -
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry Pis
Raspberry Pi 5 Mini Computer Development Board – 4GB Ram
Modules and Breakout Boards, Raspberry Pi Boards, Raspberry PisRaspberry Pi 5 Mini Computer Development Board – 4GB Ram
- Processor: Quad-core ARM Cortex-A76, capable of high performance for computing tasks.
- Memory: 8GB LPDDR4x RAM, ensuring smooth operation and the ability to handle complex workloads.
- Graphics: Dual 4K display output via micro-HDMI ports, supporting a rich visual experience.
- Connectivity:
- USB Ports: 2x USB 3.0 and 2x USB 2.0 ports for fast data transfer and peripheral connectivity.
- Networking: Gigabit Ethernet and dual-band 802.11ac Wi-Fi for robust and flexible network connections.
- Bluetooth: Bluetooth 5.0 for connecting to various devices and accessories.
- Storage: MicroSD card slot for easy and expandable storage options.
- Power: 5V USB-C power input, ensuring efficient power delivery and compatibility with a wide range of power supplies.
- GPIO: 40-pin GPIO header for interfacing with sensors, actuators, and other hardware.
SKU: 1867 -
-
Converters, Modules and Breakout Boards
LM2596 Tripple / Three Variables Buck Adjustable Step Down Power Supply Module DC-DC Converter
Converters, Modules and Breakout BoardsLM2596 Tripple / Three Variables Buck Adjustable Step Down Power Supply Module DC-DC Converter
- Input voltage: 4-35V
- Output Voltage: 1.5-35V (adjustable)
- Output current: rated current 2A, maximum 3A (heat sink required)
- Conversion efficiency: Up to 92% (the higher the voltage, the higher the efficiency)
- Switching Frequency: 150KHz
- Rectifier: Non-Synchronous Rectification
- Module Properties: Non-isolated step-down module (buck)
- Short circuit protection: current limiting
- Operating temperature: Industrial grade (-40 ℃ to +85 ℃) (output power 10W or less)
- Full load temperature rise: 40 ℃
- Load regulation: ± 0.5%
- Voltage regulation: ± 0.5%
- Dynamic response speed: 5% 200uS
- Output ripple:
- Input 12V Output 5V 3A 60mV (MAX)
- Input 24V Output 12V 3A 120mV (MAX)
SKU: 0721 -
3D Printer Parts, CNC & 3D Printers
10mm x 10mm Chain Cable Cover Drag Wire Carrier for 3D printers & CNC machines
-17%3D Printer Parts, CNC & 3D Printers10mm x 10mm Chain Cable Cover Drag Wire Carrier for 3D printers & CNC machines
Buy online 10mm x 10mm Chain Cable Cover Drag Wire Carrier for CNC Machine And 3D Printer in Pakistan. Available in 300mm, 500mm, 800mm, 1000mm, 1200mm chain sizes. Electrobes has various accessories for 3D printers and CNC machines.
SKU: CNC-080 -
-
Batteries Connectors, Connectors, Discrete Electronic Components
3.7V 3×5 (15) 18650 Battery Holder Plastic Bracket Mount
Batteries Connectors, Connectors, Discrete Electronic Components3.7V 3×5 (15) 18650 Battery Holder Plastic Bracket Mount
18650 Lithium Battery Cell Holder 3×5 Cell Spacer Bracket Stand Battery Storage Box Protection Board Cylindrical Battery Pack Safety Anti Vibration Plastic Case Box for DIY Fixed 18650 Battery
SKU: 1184 -
Consumer Electronics
Model Cutting Pad Plate A4 Size Scale Plate Self Healing Cutting Plate For Painting Engraving Rubber Stamp Hand Carving Tools
Consumer ElectronicsModel Cutting Pad Plate A4 Size Scale Plate Self Healing Cutting Plate For Painting Engraving Rubber Stamp Hand Carving Tools
Cutting Mat A4 300x220mm PVC Cutting Mat Double Sided Self Healing PVC Printed Grid Lines Cutting Board Fabric Leather Cut Paper Office Stationery Craft DIY Cutting Art Hobby Patchwork Thick Non-Slip Tools
SKU: 1763 -
EV Parts, Mechanical, Motors and Driver
350W 24V 3000RPM High Speed Electric Bike Motor MY1016 Electric EV Balance Electric Scooter Brushed E-bike DC Motor with 11 Teeth Gear
EV Parts, Mechanical, Motors and Driver350W 24V 3000RPM High Speed Electric Bike Motor MY1016 Electric EV Balance Electric Scooter Brushed E-bike DC Motor with 11 Teeth Gear
- professional: Professional manufacturing, stable characteristics and high reliability.
- convenience: Small size, directly replace your old or damaged brake for a new one, easy to carry and store. Bike is more convenience than just a simple belly.
- affordable: High speed, low noise during operation, giving you a more comfortable and affordable driving experience.
- high speed: High speed, incredible efficiency, and low power consumption.
SKU: EB-04 -
Instruments & Tools, Meters
UNI-T UT603 LCR Meter Digital Multimeter
UT600 series digital inductance capacitance meters are used to test resistors, capacitors and inductors. They can also be used to measure transistor parameters. UT603 model has these all specs and available online in Pakistan.
SKU: DM-008 -
Batteries & Chargers, Rechargeable
3.7V 3400mAh Rechargeable 18650 Li-Ion Battery Cell – New
We are providing this 3400mAh Li-Ion Rechargeable Li-ion 18650 Cell at the best price in the market for our customers. These are powerful cells with higher number of life cycles and charging capacity compared to other cells available online in Pakistan.
SKU: 1820 -
Light and Infrared Sensors, Modules and Breakout Boards, Sensors & Transducers
Infrared IR Optical Counter Tachometer RPM Speed Measuring Sensor Optocoupler Module
Light and Infrared Sensors, Modules and Breakout Boards, Sensors & TransducersInfrared IR Optical Counter Tachometer RPM Speed Measuring Sensor Optocoupler Module
Hall effect Infrared IR Optical Counter Tachometer RPM Speed Measuring Sensor Optocoupler Module Compatible with most of microcontroller. Buy online in Pakistan.
SKU: 0598 -
-
-
3D Printer Parts, CNC & 3D Printers, CNC Machine Parts
0.3mm to 3.0mm Tungsten Drill Bit Set
- Micro PCB drill bits, used to create tiny holes needed for a PCB
- Made from tungsten steel with high hardness and wear resistance, not bend or break easily
- Micro drill bits can prevent resistance, smooth to drill holes
- Sharp cutting edge can reduce cutting force and improve drilling quality
- Strictly symmetrical cutting edge, ensuring high efficient drilling and avoids deviation
- Applied to PCB, SMT, mold, hardware processing, electronic industry, etc.
SKU: CNC-159 -
